Material changes not allowed

Hello all
Currently our master data is created and changed in  system  A and ALE'd to  system B. When i go to MM02 i cant change the material in System B as all fields are grayed out.
Can some one please tell me where the config is so that the users can change these fields.
Thanks,
Zaid

Hello Zaid,
Check out the master data maintainance policy of your organization. As I understood, the master data will be maintained in system A and transferred in system B. The users are not allowed to change the master data in System B.
Discuss with your basis team if they have setup reverse syncronization (Any changes made in System B should be updated in System A as well), if not then work with them.
Hope this helps.
Regards
Arif Mansuri

Similar Messages

  • Item Category and MRP type for material is not allowed

    Hello all,
    I got a Error Message:
    <b>Transaction Z113 is not defined (Message no. V1347)</b>
    <b>Diagnosis</b>
    This combination of item category Z113 and MRP type for material is not allowed.
    <b>System response</b>
    The system does not allow further processing of this item.
    <b>Procedure</b>
    Check your entry.
    You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
    <b>The SD Configuration seems all right, I have:</b>
    Sls Doc Type (<b>VOV8</b>) – ZA9 (no delivery type assigned)
    Item Category (<b>VOV7</b>) – Z113
    Assigs Sls Doc & Item Ctgry (<b>VOV4</b>) – ZA9/ZNOR/blank/blanl/Z113
    ZNOR = Std Item-Av. chck  Del
    ZNOR defined in MM03/Sls Org 2
    Define Schedule Line (<b>VOV6</b>) = Z7 (without delivery)
    Z7 has FLAG on Prod Allocation
    Assign Schedule Line (<b>VOV5</b>) = Z113/ND/Z7
    At table: TVEPZ
    I have the entry: Z113/ND/Z7
    Guys, what would?
    Please help me out because I am stuck in this issue.
    Thanks a lot,
    Barbara

    Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
    Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
    New Rqmts class gets tied to a Rqmts Type
    New Rqmts Type gets assigned to rqmts class
    Strategy, assign the Rqmts Type to it
    Strategy Group, Assign the Strategy  to it
    MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
    It may be something in this area that you need to trace through ?
    Bill

  • Material type WERT already defined as VO material, others not allowed

    Hi all,
    I am currently trying to create a new movement type (Valuated , Non-Stock Materials). However, I was hit with the following error:-
    Material type WERT already defined as VO material, others not allowed
    Message no. CZ273
    Understood that WERT is also Valuated , but non-stock material. However, I need to copy to a new movement type with some changes to the material type on other area.
    May I know anyone can help to share the experience in solving this issue? Thanks!
    Regards,
    Michelle Low

    SAP has hard programmed stops in their programs (e.g. MM03CI10),  a material type for  value material must only exists once in table T134
    If you want to create a new one, then you have to delete the SAP given WERT material type.

  • Item category (Customized )ZJT1 and MRP type for material is not allowed

    Hi Guys,
                   When i try to create the order i see the error as item category and MRP type of the material is not allowed.
    I checked in Vov5 table, i could observe that Schedule line category is maintained.
    Could you please help us in resolving this..
    Thanks and regards,
    Rahul

    Hi,
    Please assign the Item Category ZJTI and MRP type (for eg: PD) assigned to the schedule line category in IMG under Sales and Distribution--> Sales ---> Schedule line -->Assign schedule line
    Hope this resolve your issue
    Regards,
    KrishnaO

  • Material  xyz not allowed for sales from India

    Hai Gurus,
    can any body give me solution for this....
    i am getting this error in VL01n
    "material  xyz not allowed for sales from India"
    when i click on error it was taxation error...
    and if i cross chk in mm02.xd02 evrything is correct for SP...
    where i am doing mistake
    Kindly Help.......

    Hi Venkat
    Question sounds redundant, but did you maintain tax data in sales org view for Country INDIA ?  Because after you setup Plant in India, you should start seeing country code IN in your tax data view under sales org view of material master, unless you have other plants already setup in Country IN before this one, then you shouldn't get this error.  Reward points if useful.
    regards
    Suri

  • Changes not allowed in material type

    hi all
    i have 1 material & for this material is trading good but due to mistake i have created this material with material type FERT.but if i am going to change material type HAWA instead of this material type FERT system not allowed.showing error Purchse order is in process.how can i delete purchase order if already GR & GI happen for some material.what is sort closed.if i do sort closeed can i change material type.please suggest me.
    regards
    ajit

    Dear,
    To dlete PO which is in process for GR and GI has happened.....
    Go to Tcode MIGO........Select Cancellation option....and enter the GR and GI document and save it..It will cancell the document...
    Now go to ME22N and select the line item for that material ...and click on delete button and save,
    Now try to change Material type in Tcode MMAM..
    Regards
    Utsav

  • Serial Number changes not allowed at Goods receipt level

    Hi Gurus,
    I have created serial number at the time production order creation. But at the time of goods receipt my user change the serial number manually and save the document. My requirement is system should not allow changing the serial number in goods receipt level. 
    Example:
    Prod. Order:  10001
    Qty: 1
    Serial No: 20100001.
    At the time of goods receipt user change the serial number as 20100003.
    Is it possible to restrict the serial number changes at goods receipt level?
    Thanks in Advance,
    Regards,
    S.Babusingh

    Hi,
    Not in front of the system, but if i remember correctly one of these enhancements has a check on serial numbers,
    1. User exit -> MBCF0002
    2. BADi -> WORKORDER_GOODSMVT or MB_DOCUMENT_BADI
    Check & revert if it meets your need.
    Regards,
    Vivek

  • Mail changes not allowed

    Why nokia does not allow , mails to be edited?This is for office exchange server mails.(not on gmail,yahoo etc)
    I am unable to edit the conntets of original mail ,when i forward or try to reply to the mails.
    e72 doesnt allow to copy ,cut ,paste or any modify any contents of the original mail to which i try to repsond.strange!

    What software version are you using in the phone?
    You can check this by typing in *#0000# in your phone
    Do you know what version of Microsoft Exchange server you are connecting to?
    (Microsoft Exchange 2003, 2007 or 2010)
    I would suggest that you ask the server admin to create a new test account on the server, and then configure this on your phone. Alternatively put a colleagues e-mail account credentials in your phone and test how the phone acts.
    If it works as it should with a another account it could be problem on your account related to server policies that only the Exchange server admin can look into

  • Material Description changes not allowed

    I do not want user to change the material description in Sales Order while entering Items . How I can stop this?
    regards
    Vikas
    Edited by: Vikas Puri on Mar 10, 2009 11:38 AM

    Hi,
    There are two scenarios which can happen while creating order:
    1) Order is being created by EDI - Idoc from External System. In this case the data of the order cannot be changed.
    2) You can use a user/screent exit in the VA02 screen, that once the order is saved after VA01 you cannot changed the material.
    See if you can discuss this scenario with your technical person.
    Siddharth.

  • RSPC changes even when SCC4 changes not allowed

    Hello,
    This is about accessing t-code RSPC; we want to be allowed to change Process Chains' configs. We used to have any troubles when changes in client were allowed, but after client was "closed" it started to fail. Below the details:
    SCC4: Client is currently set as:
    Changes and Transports for Client-Specific Objects -> No changes allowed
    Cross-Client Object Changes -> No changes to Repository and cross-client Customizing objs
    Protection: Client COpier and Comparison Tool -> Protection level 0: No restriction
    CATT and eCATT Restrictions -> eCATT and CATT allowed
    BW Workbench-Transport connection/Object changeability:
    RSPC, Process Chain -> Changeable Original
    RSPT, Process Chain Starter -> Changeable Original
    RSPV, Process Variants -> Changeable Original
    The assigned role owns (which as per my knowledge is ok):
    OBJECT    FIELD        LOW
    S_RS_PC   RSPCPART     RUNTIME
    S_RS_PC   RSPCPART     PROTOCOLS
    S_RS_PC   RSPCPART     DEFINITION
    S_RS_PC   RSPCCHAIN    Z*
    S_RS_PC   RSPCAPPLNM   Z*
    S_RS_PC   ACTVT        23
    S_RS_PC   ACTVT        16
    S_RS_PC   ACTVT        3
    However, after accessing RSPC and opening process chain view mode, when trying to change to "change" mode popup window is raised stating:
    Changes to Repository or cross-client Customizing are not permitted
    Choose 'Display object' or 'Cancel'.
    therefore any change can be made.
    Could you please advice? Am I missing something? I hope you can help. Thanks a lot in advance. Best regards,
    Bernardo

    Hi Bernardo,
    in Transport Connection > Object Changeability there is a third option " Everything Changeable" you have to select that option for RSPC related objects.
    Right click on any object type you want to change and chose "Everything changeable"
    this should solve your issue.
    cheers
    #PV

  • F110 error - Change not allowed - change payment amount

    Hi Experts,
    In F110, I get the below error when I try to reallocate the 3rd item (pls refer attachment). Can someone enlighten me what could be causing this?
    Thanks in advance!
    Regards,
    Em Jay

    Hi Em,
    The FZ013 error is due to changing an item which results in a change to
    the sign (+/1) of the payment. Payment method "C" is configured for
    outgoing payments. If you want to hange several items within a payment,
    check whether the changes can be made in a different order to avoid
    the error.
    The procedure to avoid the error is :
    Check whether the changes can be made in a different order. For example
    if an invoice of 1000 and a credit memo of 100 are contained in a
    payment of 950, you can block the credit memo first and then the
    invoice. The payment amount then changes from 950 to 1050 and finally
    to 50.The reverse order is not possible because a payment amount of 50-
    would result as an intermediate value.
    If you cannot avoid a change in the +/- sign for the total amount, you
    must first of all block all the items using the "Block all" function
    and then release the items which are to be paid individually. You can
    then also define a new payment method (for example, incoming payment
    instead of outgoing payment or outgoing payment instead of zero
    clearing)
    Best regards,
    Jose

  • PO change not allowed

    Dear Experts,
    Is there any User/Customer Exit availble for avoiding the PO change, if there please share the same.
    Tha

    Hi
    Try the User Exit :  EXIT_SAPMM06E_013
    Regards
    Anand

  • Activation of 7.x datasource not allowed due to changability of object type

    Hi All,
    We are facing the following issues.
    Some times we need to replicate and activate 7.x datasource at the production system but the system doesn't let as due to "changes not allowed" settings on SCC4 transaction.
    We thought that it could be possible giving permissions for Object changeability through dataware house workbench: Transport Connection. (menu edit -> transport -> Object changability). However it looks like there is no object type datasource available.
    Does anyone have an Idea how the above is possible.
    Regards,
    Theodore

    Hi,
    I am facing this same problem in BI 7 system.
    I am going through following tread notes. Please go through the same this might help you too:
    /message/2173731#2173731 [original link is broken]
    This error is occuring in our system due to Not Changable authorization in Production system. I am raising Oss Message to SAP to look into this issue and will let you know if anything possitive comes up.
    Regards,
    Mahesh
    Edited by: Mahesh Jethwani on Dec 9, 2008 12:07 AM

  • Item category and mrp type combination not allowed in MTO

    Hi,
    i am working on make to order without variant configuration scenario,
    while creating any customer order i am getting following error.
    "This combination of item category YBTA(customized item category)  and MRP type (i have used mrp type PD ) for material  is not allowed.", due to this error i am not able to create any order.
    Please help me to solve this problem.
    Regards
    Edited by: abhijeet rachkuntwar on Aug 24, 2009 7:47 AM

    I have the same problem. You have posted the question long time back. if you happen to solve the problem plz help me by answering your question. if not, I would appreciate help from all the experts here
    Many ThanX.

  • Nonstock material PO value should not allow to change once it picked fromPR

    Hi There,
    when create PO for non stock material it will pick price from PR to PO once it pick the value again it should not allow to change.
    so what ever value is there in PR same should be in PO also even if we try to change PO value system should not allow
    so please advise me

    Dear
    If you want to copy the price from PR to PO do the following settings
    Here we have to do:
    First create a parameter in
    SPRO>Materials Management>Purchasing>Authorization Management>Define Function
    Authorizations for Buyers
    set the following fields:
    Order price adoption, Ref. to PReq, Change source, Change
    OTy./it. cat. and with Field sel. equals to AKTH. After created
    this parameter we have to set the users profile (using SU01 Transaction) with Parameter
    EFB (Function Authorization: Purchase Order).
    After doing all the settings what i mentioned, when you create the requisition that time before saving you have to select the price adoption as net or gross than only it will copy to the po because default is do not copy
    so go Valuation tab in the requisition and in PO price field select as nte price or Gross price than save the reqs
    now if oyu create the PO you will see the price
    Regards

Maybe you are looking for