Material Document (Post goods receipt) for each Tranfer order in Inbound De

Hello All,
We have following the below process for goods receipt.
1. Create Purchase order.
2. Create Inbound Delivery.
3.Create Transfer order for each line item in Inbound Delivery
4. Confirm tranfers orders.
5. Post goods receipt will automatically takes place after last Transfer order confirmation for that delivery.
So, in the above scenario the Inventory is not available in the IM till last transfer order is confirmed.
So, is it possible to create a Material Document at each transfer order confirmation and post IM inventory , instead of waiting till last transfer order is confirmed.
please advice.
Thank you
T Reddy .

Hello Aktar,
Yes With standard SAP we can post goods receipt either before using MIGO and after using VL32N.
In our scenario we are using Inbound Delivery.
So , with using Inbound delivery we are posting goods receipt after last TO confirmation.
But In our client they may take 2 days to puyawat all the items of an Inbound Delivery.So they do not want to wait till 2 days for the IM posting.
ie in SAP WM as soon as Inbound delivery is created it creates negative stock in 902 and once all the transfer order are confirmed and then post goods receipt takes place and 902 is cleared.
So, we are slitting the TO at delivery line item level and creating separate TO for each line item in a delivery.
So, I am wondering whether is there a way so as soon as first TO is confirmed WM stock updates and IM stock also should also update with same amount with a material docuement.
ie TO by TO IM posting should take place and at Last TO post goods receipt should happen at delivery level.
Please advice.
Thank you
T Reddy.

Similar Messages

Posting goods receipt for the Purchase order

Storage bin 002 100 STBIN1 blocked because of current inventory
what does this message mean?

Hi,
In simple terms the stock in this bin is currently in the process of being counted.
Get them to either post the count or cancel it, you cannot carry out any movements until this has been done.
Steve B

Batch number issue when posting goods receipt for Subcontracting PO

Dear expert,
I always heard there will be issues while posting goods receipt for subcontracting PO. If the component is managered by batch.
No batch number will be proposed during PGR in MIGO...
I dont quite understand where is the issue??
My understanding:
We have batch managered components and End Product. All have batch numbers, then we PGI the stock to 'SC stock' via 541 movement type.
Then Vendor will finish the end product and send us back the end product.
We consumption the components use 543 O movement type? And GR the end product..
So while goods receipt, the sytem just need pick the existing batch number for both components and finish products..
Where are the issues???
Thanks.

Hoo Laa wrote:
I have questions for people always mentioning there are issues with batch determination while post goods receipt for subcontracting orders.
>
> I am thinking maybe they didnt active the batch determination for 543 movement type..
>
> Thanks.
Hi Hoo,
You are right!!
Setting of batch number determination has its importance in Mvt Type be it 541, 543....
The issue you might have observed would be with Batch Determination in Goods Issues which folks find it bit tough to achieve n make it work for them.
Cheers!!
Shiva

How to post good receipt for an inbound delivery with HU in the stock?

Hello,
We have an inbound delivery of a purchase order with 10 Handling Units inside on.
The HU's has been put in a storage bin (by transport order + confirmation) before a good receipt has been posted for the whole delivery.
Due to this it's not possible to post good receipt for the inbound delivery, and the available stock quantity is in minus on zone: '902-GR Area External Rcpts' since the handling units are already in a storage bin.
Can anyone help me on this matter?
Thanks

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Problem for Goods Receipt for Subcontracting Purchase Order

Dear all,
Presently, we are using SAP version 4.6C and we need to introduce GR for
Subcontracting Purchase Order. We have developed a ABAP program to handle
subcon Goods Receipt by uploading flat-files from our subcontractor. The
scenario is as follows :
Goods Receipt for Subcontracting Purchase Order
1. In the ABAP program, function BAPI_GOODSMVT_CREATE will be used for goods
movement.
2. Data provided to the function are as follows :
- Posting date
- Document date
- Material number
- Plant
- Storage location
- Batch
- Movement type (101)
- Quantity
- Purchase order number
- Purchase order item
- Movement indicator (B - Goods receipt for purchase order)
3. The function will do data verification and automatically determine GI
item for subcon stock:
- Movement type (543)
- Special stock (O - parts prov. vendor)
- Material
- Quantity
- Plant
Our problem is that :
Only the GR item in the interface is to be transferred and the GI item is
determined by the system. So, the quantity for subcon stock cannot be
changed using this BAPI. Then the system will continue processing the goods
receipt and create material document.
Manually, by using transaction code MIGO, the user can display the subcon
stock data and then change the quantity.
By using transaction code MB01, after the user fills in all the GR fields,
the system comes to line item 002 (subcon stock data) and then quantity can
be changed.
As per user requirement, quantity for GI item must be same with the quantity
that has been transferred to subcon vendor in Delivery for Subcon
(transaction code VL02N).
We cannot achieve this requirement by using the BAPI mentioned above. Would
appreciate any valuable help from anyone who is able to help us on this
matter. Are there any other BAPI's that can help us to achieve the same
result ?
Thank you in advance and best regards.

As far as i understood the problem I suggest u to create the
BDC according to user actions that are performed in he manual
operation.
I can't say that the BAPI performs the exac solution what you want.
I have done some BDC work using MB01 and suggest you to be careful
and try to keep the complete in the logic as some chages in rows in BDC will
change the complete scenario.And throw correct quantity val in correct
material
row.
This methodology will help u even in mass uploads.
Or in case of automation u can perform the call transaction BDC in
background mode.
so As per my understanding bdc program is the solution. pls try and let me
know.

What is a Statastical Good Receipt for the Purchase Order?

Hi,
What is a Statastical Good Receipt for the Purchase Order?
What are the effects of the same in the documents like the po,stock (quantity and value), invoice verification etc?
Thanks
Regards

Hi,
In general the Statical GR done for Thirdparty Purchase Order.
As no stocks updated at plant, its only record purpose.
If you don't done this GR , also you can able to do MIRO.
The MIRO passed without any error.
Regards

User exit for post good receipt for tcode VL32n(inbound delivery)

HI,
I need a user exit which should get triggered when the user hit the button "post good receipt" under tcode VL32N. I appreciate your help.
Thanks,
Sanjay

Hi,
Here is the list
Enhancement
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr)
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport order
Business Add-in
DELIVERY_ADDR_SAP                       Address Change in Delivery Processing
DELIVERY_PUBLISH                        Announcement of delivery data during database update
Shib

Post Goods Receipt for Inbound Delivery using WHSCON IDoc

Dear All
Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
We create a delivery (type NL = replenishment delivery) for this POs
As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
We dispatched 50 units of a product => QTY:50:12
The partner received indeed 50 units => QVR:50:66
Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
the goods receipts for the products in the original stock transport order and
upate the message flow in the delivery
My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
To make a long story short here are my questions:
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
Does anybody have an example on how to fill the WHSCON IDoc?
Or is my approach a cul-de-sac ?
Kind Regards
Uwe
PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

MPN Material Field in Goods Receipt for Purchase Order

Hi,
I have created PO for MPN material "MFG-A" for IM material " 123". ( ECC 6.0)
Already the material "123" is maintained with other MPN material "MFG-B"
The have checked the " MPN Change" check box in the respective Mfg Part profile( IMG: OMPN)
While I am doing goods receipt, the MPN material field is in display mode.
But in other system the field is in change mode.
Default the system will show "MFG-A" as the MPN material is maintained in PO.
But I need to change the MPN materail at the time of GR.
I would like to change the MPN material from "MFG-A" to "MFG-B" while doing GR time.
kindly guide me what are the settings required to change MPN Material Field in Goods Receipt.
Thanks in Advance,
Kumar.

Hi,
I have maintained all the settings.
But the issue was, I have not put the field "MPN material" (GOITEM-EMATN) as input field in field selection group in Inventory management.( it was in display mode )
Once I have changed to input option, I can able to change the MPN material while GR.
Regards,
Kumar

Post Goods Receipt for Inbound Delivery via IDoc SHPCON (DELVRY03)

hi all,
I'm using IDoc SHPCON (Delvry03) for posing goods receipt for inbound delivry.
Can anyone give a sample IDoc or tell which segments must be filled.
Thanks!
Regards,
Hui

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Post goods receipt of HU items (Handling unit) inbound deliveries

Hi all,
    could u plz tell me how to post goods receipt of HU
    items. i am using BAPI Goods_movment_create
    ( movement indicator 'B' and '01') but it
    is giving error. i am not passing purchase number
    and item , insted i am passing inbound delivery
    number and item. plz help me out.
thanks and regards
manish

PLease read the FM documentation.
It is given very clearly.
Regards,
ravi

Goods receipt for a Project Order

Hi,
I am trying to do goods receipt against a project order but getting the following error:
Goods receipt for purch. order" is not allowed (WBS BUILDING CONSTRUCTION)
I am doing this in order to book actual cost against a WBS element.
Kindly Help.
Regards
Karan

Hi,
The system status of WBS should be REL ie released. Also check whether current user status is restricting business operation of GR.
Hope this helps.
Regards

Post Goods Receipt for Inbound Delivery with BAPI_GOODSMVT_CREATE

Hello,
I try to post GR for an Inbound Delivey with BAPI_GOODSMVT_CREATE and it is not working.
I know delivery number and PO number and give both to the bapi.
I am not sure how to set the movement indicator in the item.
When I set it to B.
I do get a shortdump from MB_POST_GOODS_MOVEMENT numer 143, stating that this type of movement is not allowed with this transaction
when setting to L I do get an error stating
"Update control of movement type is incorrect (entry 101 X X _ L)" from message class M7.
Below is the coding for it.
Thank you very much for your help
Michael
* Füllen der Kopfdaten
ls_gm_header-pstng_date = sy-datum.
ls_gm_header-doc_date = sy-datum.
ls_gm_header-ref_doc_no = delivery_header-lifex.
ls_gm_header-bill_of_lading = delivery_header-bolnr.
ls_gm_header-gr_gi_slip_no = delivery_header-xabln.
ls_gm_header-pr_uname = sy-uname.
ls_gm_header-ref_doc_no_long = delivery_header-lifex.
ls_gm_header-bill_of_lading_long = delivery_header-bolnr.
lv_gm_code = '01'.
* Füllen der Positionsdaten
LOOP AT selected_delivery_items INTO ls_delivery_item.
    ls_gm_items-material          = ls_delivery_item-matnr.
    ls_gm_items-plant             = ls_delivery_item-werks. "             0001
    ls_gm_items-stge_loc = ls_delivery_item-lgort.
    ls_gm_items-move_type ='101'. "101
    ls_gm_items-entry_qnt                      = ls_delivery_item-lfimg. "          10,000
    ls_gm_items-entry_uom                      = ls_delivery_item-vrkme.
    ls_gm_items-po_number                      = ls_delivery_item-vgbel. "55001582
    ls_gm_items-po_item                        = ls_delivery_item-vgpos. "00010
    ls_gm_items-mvt_ind = 'B'.
    ls_gm_items-expirydate = sy-datum + 30 .
    ls_gm_items-deliv_numb = ls_delivery_item-vbeln.
    ls_gm_items-deliv_item = ls_delivery_item-posnr.
    APPEND ls_gm_items TO lt_gm_items.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header               = ls_gm_header
      goodsmvt_code                 = lv_gm_code
*     testrun                       = 'X'
*   GOODSMVT_REF_EWM              =
   IMPORTING
     goodsmvt_headret              = ls_gm_header_ret
     materialdocument              = lv_mat_docno
     matdocumentyear               = lv_mat_year
    TABLES
      goodsmvt_item                 = lt_gm_items
     goodsmvt_serialnumber         = lt_gm_serial_numbers
      return                        = lt_return
if lt_return is INITIAL.
endif.

Hello Pranav,
the input for the business data is correct.
When performing the goods receipt with Migo it works.
I think the B in the movement indicator is correct, but there might be something wrong with the other data.
Best regards
Michael

Goods receipt for Stock Transport Orders

Hi Gurus
We create STO'S ( with in same plant and between two storage locations) and followed by delivery ,PGI with 641 movement type.When we run the MD04 list we have the open items because we haven't done the goods receipt when goods issue is done for the delivery.We have recently modified the 641 to 647 movement type and it does the GR automatically for the receiving plant.
My question is there any program to post the GR for deliveries which are open for past three months automatically.
Any suggestions will fully rewarded
Thanks
Sam

Hi
Im not familiar with LSMW.Can u tell me how can it be used?
Thanks
SAM

Material document posted during PGI for Outbound Delivery

Dear Experts,
We have an Outbound Delivery having multiple line items.
I have a couple of questions.
1). How may material doc numbers will be generated if I do PGI multiple times?
2). Can I have 5 different material docs if I post GI 5 times (Per line). Is this scenario possible?
Your inputs are valuable. Kindly revert
Thanks,
Shetty

Hi Harry
In my scenario, Outbound delivery having 5 lines.
I created TO a and confirmed TO for only 2 lines.
Now when I do PGI for outbound delivery, GI is done for only those 2 lines with confirmed TO
I will do the rest of GI again
In this scenario, what will happen? how many material docs are posted?
Thanks
Shetty

Material Document (Post goods receipt) for each Tranfer order in Inbound De

Similar Messages

Maybe you are looking for