Material has more than one plant, only show the price for the first on

Hi:
I am having the standard price for the material with the different plants ,I am seeing only one Material and Standard price(if a material has more than one plant, only show the price for the first one In the report ):
plant :de87 Material: 60020601 Standard price: 1237.00
plant:PT01 Material :60020601 Standard price: 634.00
In the report I am seeing DE87 with the standard price :1237.00 .
I am extracting from the 0MATERIAL_ATTR
Please help me how can I display all plants with the material and std price. In my data source there is no PLANT
rgrds
Kumar

Hi:
Report is running on 0MATERIAL(Transactional master data),Data sourc: 0MATERIAL_ATTR,
We are having the standard price in the 0MATERIAL ,(Standard price is combination of plant and Material) .Plant is not available in the material,so in the report its displaying only first result
plant :de87 Material: 60020601 Standard price: 1237.00 --->Displaying this
plant:PT01 Material :60020601 Standard price: 634.00
In the above we are having the same material but different plant and different standard price. so I need to display the both in the report.
Rgrds
kumar

Similar Messages

  • In Music, sometimes an album that has more than one artist, only one shows up, how do I get them all that are all on the album to play in sequence when I select that album?

    I can't figure out why, on my ipod touch in Music, when I select some albums that have more than one artist, the whole album doesn't come up to play all together.  This happens in some compilations, and only ne song shows up from each artist on the album.  Or like on an artist's album that has someone else singing with her.  I get that they are on the same line as an artist, but the album is an album, and when you play an album, the whole thing should play - right?  Thanks for your help!

    Generally all you need do is give tracks from the same album a common Album Artist. See Grouping tracks into albums. The images need an update but the basic info. still holds.
    tt2

  • More than one Plant in Customer Material record

    In Customer Material Info record I want a option of more than one plant. Right now I can enter only one plant in customer material info record. What can I do to have a option of more than one plant in customer material info record.
    Regards,
    Kumar

    hello, friend.
    as i understand, you would want options for more than one plant (to choose from) and not to restrict the number of choices.
    for practical reasons, you can only enter 1 (standard) plant in the customer-material info record.  nevertheless, you can enter a different plant in the customer master, and another plant in the material master.
    when you process the sales order, you can change the plant to any other choices, even those not included in the customer-material or customer master data, as long as these plant choices and your customer are assigned the same distribution channel.  of course, your material should also be extended to these plants.
    i hope this helped, even if a little.
    regards.
    jty

  • Material Master in more than one plant /purchasing group/Valuation Class

    Hi All,
    How to maintain a Material Master in more than one plant /purchasing group/Valuation Class......
    Points shall be awarded accordingly,
    Regards,
    Rounak

    in mm01 u can extent the material for new plant
    first creat all the views say purchasing accounting basic view etc for one plant
    the go to MM01 put same materal code and select the views purchasing and accounting
    now put the other plant number
    enter
    and put the purchasing and valuation class etc asd save
    thuis u can extend the material to other plant
    reward if usefull
    Message was edited by:
            Umakant Bhangale

  • My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

    my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

    How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

  • Error using JAX-WS to consume a WS that has more than one parameter

    I am trying to create a web service proxy in JDeveloper using JAX-WS for an OAM web service from a WSDL (identity/oblix/WebServices/CompositeWebServices/WSDL/um_view_interface.wsdl). I received the following error when I try to run the proxy:
    Exception in thread "main" com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: SEI test.profile.OblixIDXMLPortType has method oblixIDXMLUmView annotated as BARE but it has more than one parameter bound to body. This is invalid. Please annotate the method with annotation: @SOAPBinding(parameterStyle=SOAPBinding.ParameterStyle.WRAPPED)
    at com.sun.xml.ws.model.RuntimeModeler.validateDocBare(RuntimeModeler.java:1267)
    at com.sun.xml.ws.model.RuntimeModeler.processDocBareMethod(RuntimeModeler.java:1256)
    at com.sun.xml.ws.model.RuntimeModeler.processMethod(RuntimeModeler.java:628)
    at com.sun.xml.ws.model.RuntimeModeler.processClass(RuntimeModeler.java:416)
    at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:267)
    at com.sun.xml.ws.client.WSServiceDelegate.buildRuntimeModel(WSServiceDelegate.java:715)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.buildRuntimeModel(WLSProvider.java:427)
    at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:703)
    at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:347)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:409)
    at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:330)
    at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:312)
    at javax.xml.ws.Service.getPort(Service.java:92)
    at test.profile.OblixIDXMLService.getOblixIDXMLPort(OblixIDXMLService.java:79)
    at test.profile.OblixIDXMLPortClient.main(OblixIDXMLPortClient.java:23)
    Process exited with exit code 1.
    It seems like the OAM web service (um_view_interface.wsdl) is not WS-I BP 1.1 compliant. It expects two elements under the body. WS-I BP 1.1 specifies that there should be only one child in the body of the element.
    The expected request body would look like this, there are two elements under the body:
    <soapenv:Body>
    <authentication xmlns="http://www.oblix.com/">
    <login>loginname</login>
    <password>pass</password>
    <domain>dc=test,dc=org</domain>
    </authentication>
    <request application="userservcenter" function="view" mode="dataonly" version="NPWSDL1.0" xmlns="http://www.oblix.com/OblixXMLLocalSchema">
    <params xmlns="">
    <ns1:uid xmlns:ns1="http://www.oblix.com/">cn=tester,cn=Users,dc=test,dc=org</ns1:uid>
    </params>
    </request>
    </soapenv:Body>
    Has anyone encountered the similar problem? Is there a solution to this problem?
    Your help is appreciated!

    Can u pls share ur solution if u have found a way 2 create a web service with 2 ports.I have not yet found a solution so far and nobody reacted to all my posts in the different fourms. It seems nobody is implementing web services with two ports using the EJB annotations technology.

  • VLD-0201:Table has more than one primary key

    hi
    i'm working with OWB 9.2,I was imported the table from database,when i validating that it is giving message:
    VLD-0201:Table has more than one primary key
    vld-0209:Duplicate unique key i.e:cust_acc and SYS_C00435 detected.
    Can i use this table and generate the mapping with out any errors?
    Any help will be very generate.

    Hi Ashok,
    I'm quite curious how you managed to get a table with 2 PK's.
    I tried it myself:
    =======================================================
    SQL>create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date);
    create table x(c1 number constraint pk1 primary key,c2 number constraint pk2 primary key, c3 date)
    ERROR at line 1:
    ORA-02260: table can have only one primary key
    SQL>ed
    Wrote file afiedt.buf
    1* create table x(c1 number constraint uk1 unique,c2 number constraint uk2 unique, c3 date)
    SQL>/
    Table created.
    =====================================================
    As you can see, trying to create a table with more than 1 PK is impossible. With Unique Key, that IS possible (see second example).
    I don't expect mappings to function properly with such an error message.
    Is it possible for you to drop the table in the database, correct the definition of the table in OWB and then deploy that corrected version to the database?
    If on the other hand the table on the database is correct (i.e. has only one PK) then the import into OWB obviously did not go well and I'd suggest you drop the imported definition and try to import it again.
    Cheers, Patrick

  • How do I tell FiIrefox to only restore a sesson of more than one tab, and disregard the restore of a single tab session (ie. closing the browser)

    I am on the beta channel of Firefox (currently 17.0, by the about window) and I cannot seem to find a way to limit the size of a browsing session that is automatically restored when re-opening the browser. In the past, Firefox would only save sessions of more than one tab when closing the entire application, and ask me about restoring said session when restarted. Now, Firefox seems to treat a session of just a single tab the same, which is a preference I dislike, given that I use a blank start page to great effect.
    I am using a number of addons, including Tab Mix Plus, which specifically modifies tab behavior (although I have it configured to use Firefox's default session manager), but the problem persists even with all addons disabled.
    I cannot seem to find an option in about:config to change this behavior. Is this a permanent change within Firefox, and if so, is there or will there be an option to specify the number of tabs that constitute a session that will be automatically saved?

    Make sure that Firefox closes properly to prevent session restore from restoring a crashed session.
    *"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
    *"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
    Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.

  • Auto creation of child requests when parent request has more than one group

    Hi,
    I have created a request dataset which has a child form for AD Group. While raising a request, if I add more than one group, how to process the approval flow. Because I will be having different different approvers for different different groups. Is there any way to create child requests automatically when we submit a request with more than one group? I am using OIM 11.1.1.5.0.
    I know in OIM 11g, whenever user raises request for more than one beneficiary/target-resource then OIM breaks that request into Child Requests. But this is not happening when I add more than one group in the same resource. Do I need to write my own code for DataValidator to split parent request into child requests upon validating child form? If so, is it going to impact the existing feature which is creating child request when parent has more than one user/resource.
    Please let me know.

    No not possible OOTB in current version. Check {thread:id=2318652} for more information.
    -Bikash

  • An operation has more than one setup activity-error message

    Hi All,
    I have a queue which is failing and giving error message "An operation has more than one setup activity".
    I have  debugged it but of no use.
    In SAP R3 planned order data is created and is being sent to APO system through a CIF interface in queue.
    In APO system,planned order data is integrated to process order,during this they are getting the subject mentioned error.
    Kindly help me how to rectify this error.
    Please help...Thanks in advance.

    Hi,
    Back again...hopefully below should solve your issue.
    Check if any of the co-product (of the main assembly) has GR processing time. Are there any phantom component in the BOM, if yes, please check the co-products in phantom assembly as well.
    Any co-products /phantom assembly should be assigned to APO related Produce phase.
    Otherwise, you can remove the GR processing time for co-products (make it zero) and sync the master data and then try.
    This should solve the issue.
    Let know if this helps.
    Regards,
    NR

  • Lumia 520 SMS- when a contact has more than one nu...

    Hi- when calling a contact who has more than one phone number it is easy to choose which of the numbers for that contact to use, but when sending SMS there is no option to choose. How does the SMS system decide which of the available numbers to use?
    Solved!
    Go to Solution.

    If I do the following steps: Messaging > + >To + > Select contact > I see all numbers listed for the contact.
    If I do instead: People > Contact > SMS, the number entered as "mobile" is selected by default. If you want to change it to "mobile2", you need to go: ... > switch number and select from there.

  • Work centres for employee of more than one plant

    Hello experts
    I have a question regarding work centres. Our department is managing a pool of workers which consist of employee from more than one plant. Somebody had made experience concerning this issue?
    Furthermore we have to manage external workers as capacity. How can I build up this in SAP?
    Best regards

    >
    > I confused plants with company code.
    >
      This bit difficult for me to decide and say something.
      Depends on the business requirement and business process and legal statuses it will be decided.
      some time plans can also be company 'codes'.
      if the management wants to differentiate plants in financial terms plants may become company codes.
    >
    So we have employees of different company codes which get managed by one department manager. Is that possible to make one work center so that we are able to manage them together. Seems infeasible.  So we have to create for every company code one work center, but we never have an overview of our total workers...
    >
    One thing you need to get clarified here. Company is a separate legal entity.
    if you want one employee to work in different companies on different assignments you support use (MGE and CE concept)
    >
    > If he/she working in two different site we can manage the situation with dual reporting concept.
    > and with:
    > For cost center you can always use cost center split. while posting to FI/CO.
    >
      Dual reporting is to manage the people.
      Cost is for final analysis ( where employee work how much incured, how much profit/loss earned)

  • Intercompany process - Determine more than one plant to one customer

    Hi all,
    We have one intercompany customers/vendors created to each company code. In this scenario, it is possible to have one delivering plant to each customer/vendor.
    Do you know how we can determine more than one plant to one intercompany customer/vendor?

    Hi,
    Is it possible to change the valuation level from a plant to a company code?
    We currently have two plants and this leads to cost price differences between the plants for the same materials.
    From a sales point of view the business requires margin reporting to be the same no matter which plant makes the same.
    Is there a procedure to be followed to do this?
    If at a later stage we want to move back to plant level valuation is thie possible?
    Your input and help appreciated.
    Regards

  • Assing more than one Plant to company code when valuation area is CdCd

    Hello,
    Is it possible to assing more than one plant when you change you valuation area (OX14) from plant to CdCd ?
    Regards

    Hi,
    Is it possible to change the valuation level from a plant to a company code?
    We currently have two plants and this leads to cost price differences between the plants for the same materials.
    From a sales point of view the business requires margin reporting to be the same no matter which plant makes the same.
    Is there a procedure to be followed to do this?
    If at a later stage we want to move back to plant level valuation is thie possible?
    Your input and help appreciated.
    Regards

  • MD04 for more than one plant

    HI friends,
    My requirement is to have the MD04 screen/data of more than one plant together in one screen for comparision for the planner.
    Will it be possible.
    Please advise.
    Thanks in advance.
    AKS

    hi
    in MD04 u can not view data for more than one plant ..this is a std functionality
    Vishal...

Maybe you are looking for

  • Space requirements for Time Machine?

    Greetings, I have recently bought an iMac (last week) and awaiting my update to Leopard. One of the novelties that interests me most about Leopard is the Time Machine, but I was wondering how much disk space it would require on my external drive. I k

  • Is it possible to insert a table value in query output?

    Hi, I am developing a query in which i have to display is a few values from a table in the output. I want to know if it is possible to directly get the values from the table thru the user exit and display in output or should i first put the values of

  • UDF to compare two values and Pull another value if equals

    Hi all, I am looking for UDF to perform the following logic, please help me I will have 3 inputs, say field1, fields2, field3. If field1 = field2 then return field3. You may say that this can be implemented by message mapping with IF condition itself

  • String with length 1 became 4 when nls_lang_semantics=CHAR

    Hi, We are using Oracle 9.2.0.1 database with charset = UTF-8, and we have set nls_lang_semantics=CHAR. We got a problem in our java program is that for a column with char(1), after I insert a java constant 'Y', the result I get back from select is a

  • Auxiliary cable to car speakers works, but not to headphones

    Bought my iPod at Target just before Xmas 2012 (which means no warranty through Apple). Use it to listen to music on my car through an auxiliary cable which works just fine, but I just flew to Vegas for the weekend and it was the first time I used he