Material Ledger  - release actual price as the standard price for the next-

Hi Gurus, Sap Library /documentation about Material Ledger says:
"At the end of the period, an actual price is calculated for each material based on the actual costs of the period. This actual price is called the periodic unit price and can be used to revaluate the inventory for the period to be closed. In addition, you can use this actual price as the standard price for the next period."
How Can I do that?  i've calculated the new actual price but i could release it as a new standar costo.
Kind Regards
André

Hi Both,
I think there is something else to add to this, the new PUP price can only be applicable in the period N+2 where N=Period of closing. This is something that is not specifically mentions in SAP documents.(not that I know of ) but I found it the hard way!
Cheers

Similar Messages

  • Standard prgram and the standard form for the AR Bill of Exchange

    I need to configure AR Program for Bank bills and Bill of Exchange. This configuration is for France.
    Can you let me knoe the standard prgram and the standard form for the same.
    Regards,
    Senthil

    Hello,
    You can refer to the below sap help link whcih describes about the Bill of exchange understanding in sap
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FI-AP-AP-BE.pdf
    http://help.sap.com/saphelp_45b/helpdata/de/e8/f0c10a0a6911d294f200a0c929f4c9/frameset.htm
    Alternatively you can also check the customizing settings for the BOE which details on the settings needed foractivating of BOE
    hope this helps
    regards,
    radhika

  • Can I customize the standard columns for the search results (list view) specifically?

    When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".

    re :When searching for emails
    what method are you using?
    Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
    '''If you used the Global Search:'''
    Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
    Then a search is returned in a new tab.
    You click on 'open email as list' - to open in a new tab.
    Is this the search results list view that you are refering to?
    the default columns should be:
    From, Subject, Date, Location
    If you only want to see eg: From and Date
    click on the icon 'select columns to display' located to far right of header column name.
    deselect Subject and Location
    next time you run a global search then only those columns appear in the 'open email as list' view.
    '''If via 'Edit' > 'Find' > 'Search Messages' ?'''
    enter search parameters and click on 'Search'
    Is this the search results list view that you are refering to?
    the default columns should be:
    From, Subject, Date, Location
    Subject and Location cannot be edited.
    Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
    Any column headers you select will not be remembered if you close and later peform another search.
    If you click on 'Save as Search folder'
    This will create a folder in your Folder Pane and you can select column(s) you wish to display.
    Any Column headers you choose to display are selected for that saved search folder.
    The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
    '''If using Quick Filter:'''
    The QuickFilter type of search is done on the folder that is selected.
    You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.

  • How to pass the standard value for the entire datapackage in the routine

    Hi Gurus,
    I have timestamp field in the target. In endroutine , i assigned system date to the tiemstamp field . If i assign sy-datum to that field, if i get 4 datapackage im getting 4 different timestamp for each of the datapackage...
    But my requirement is the timestamp should not vary for each of the datapackage.
    For eg.
    Timestamp
    20111212060205 - Datapackage 1
    20111212060602 - Datapackage 2
    But i need as
    Timestamp
    20111212060205 - Datapackage 1
    20111212060205 - Datapackage 2
    How to pass it?
    Thanks in advance

    you can use tvarv table.
    if the datapackage number = 1,
             use the current timestamp
             overwrite the existing entry in tvarv.
    else
      use timestamp of tvarv

  • Please Tell  me the Standard Bapi for Purchase Order Creation

    Hi,
      Please tell me the standard BApi for the PO creation. How to excute the standard Bapi. Please help me.
    Regrads
    Mohan

    Hi Mohan,
    Use this BAPI BAPI_PO_CREATE1.
    Check this post, you have program aswell
    https://forums.sdn.sap.com/click.jspa?searchID=7294168&messageID=1172796
    Regards,
    Satish

  • Releasing the Standard price for the co product.

    Hi All,
    In my scenario , we have configure co product config and is that i have made the respective settings for the co - product in the material master with the joint production and the apportionment structure defined in the suitable ratio.. The cost estimate has been executed and the cost apportionment are resulted as per defined and it is perfect...
    But when i tried to release the standard price using CK24, the price of the main product (FERT) is getting updated in the material master whereas the price of the co- product (FERT) is not updating in the material master.  Is any settings has to be made from controlling aspect or settings in material master...
    regards,
    Mahesh

    Hi Mahesh,
    If you want to mark and release the non-leading co-product, you
    need to create a cost estimate for it seperately. Then goto CK24,
    the marking will be OK.
    Regards,declan

  • To update the standard price of a material

    Which transaction is used to update the standard price of a material

    Hi,
      Use the transaction CKMLPC to update the standard price of the material.
    Thanks,
    Naren

  • How to enable the standard price in the accounting -1 view of material mast

    Hi,
    When i was trying to create a material of material Type: FERT, Iam unable to enter the price of the material in the accounting -1 view-> standard price.
    The field has been disabled.
    So please tell me how to enable the standard price.
    Regards,
    Rudra Prakash. S

    hi
    go to OMS2  double click FERT
    in valuation check which price control is allowed
    it should be std. price
    go to OMSR  check MBEW-STPRS  note field group
    in OMS9 for this group and material combination check whether that field is maintained as display
    Vishal...

  • Problem with changing the Standard Price using MR21

    I'm upgrading the system from 4.6C to ECC6.
    Upgrading the Standard Price works normally in 4.6C. However, in ECC6, I notice that the data saved to CDPOS table is wrongly formatted. Therefore the other programs fail to read from this table.
    Standard price is supposed to be right-justified. But it not like that in ECC6.
    Can anyone tell me we should I look into to control the process of saving the data to CDPOS?
    Thanks.
    Han

    Thanks Amuktha.
    The link doesn't seem to help resolving my problem.
    The changes is saved into CDPOS in the field Value_New (CHARACTER 254) in the way that the actual data can be retrieved by:
    value_new+238
    But any update to the standard price using MR21 now result in the value of Value_New that require:
    value_new+7
    to get the actual data.
    Further more, in the old system, the standard price value in the decimal form like: "55.66" will be save to VALUE_NEW as "5566". So to get the real value, the system need to devide the value by 100 to get the actual new price.
    In the ECC6 system, it is exactly the same as what we input: "55.66".
    My question is: Is there an user exit, BADI or any way that can interfere the process of saving the data to CDPOS so that I can ensure the new Price will be save as "5566" and can be extracted using VALUE_NEW+238?
    Thanks.
    Han

  • Urgent help for a function module or BAPI to get the standard price.

    Hi,
    I want to know whether there is any existing <b>funcion module or bapi</b> to get the standard price (STPRS) which is updated in the table MBEW during the execution of a costing run for standard cost through the transaction ck40n.
    helpful answers will  be rewarded !!!

    Hi,
    You can use the BAPI BAPI_MATERIAL_GET_DETAIL
    Thanks
    Naren

  • What is the standard rate for ordering extra copies of a Photobook?

    I will be shooting a wedding in the coming months, and as a part of their package they are ordering a Photobook, which I will make through iPhoto/Aperture.
    The couple are looking to order extra copies of this Photobook, and would like to know how much the extra copies will cost?
    Can anyone tell me the standard rate for ordering extra copies of Photobooks.
    If a general rate does not apply, can someone give me the cost of an extra copy of a standard 20-page book?

    Greetings,
    Pricing information is here: http://www.apple.com/ilife/print-products.html
    Keep in mind there will be shipping and applicable taxes which you can find out about by making a book in iPhoto and putting in your information when you go to buy it (it gives you the price total before you actually hit the final buy button).
    Cheers.

  • Price valuation with standard price in case of external procurement

    Dear All,
    I have the following scenario with my client.
    All the materials will be valuated with price control S, whether procurement type is E or F. We don't have any problem if procurement type is E. But where as if procurement type is F and price control indicator is S, the system calculating the moving average price and as well as standard price is also updating for some materials. For some materials there are not moving average prices.
    1. Can any one tell me when SAP calculates both moving average price and standard price? is there any setting to be done.(procurement type F and price control S)
    2. there are differences between moving average price and standard price, ofcourse there may be a difference, but in some cases the difference is more and higher than the standard price, this may cause financial loss to the company. How can solve this.
    full marks will be awarded.
    thanks & regards,
    Ramesh Balivada

    Hi
    Moving average is updated for External purchases although price control is standard price in all cases where there are movements in materials i.e., when they are purchases...
    Check for the materials where there are no updation of moving average and externally procured materials, there might not be any purchases..
    There would be no losses as even though it is calculating mov avg price, the stock, consumption is calculated with std price only.
    Check both the cases where there are std prices and check for cases where there are both prices getting updated.
    Regards,
    Suraj

  • SPRO Settings to configure the standard Workflow for PO

    Hi Guys,
    Please let me know the steps to configure the Standard PO workflow. I want to know the SPRO Settings for the same

    Search this forum with keyword Release Procedure and you will get your answer. Ideally fnal people should configure this settings.
    Thanks
    Arghadip

  • Problem Moving From the Standard Edition to the Enterprise Edition

    Hi !
    I am trying to move from Oracle 10g R2 10.2.0.1 Standard Edition to Oracle 10g R2 10.2.0.1 Enterprise Edition.
    Platform is MS Windows XP PRO SP2
    I follow all steps described in "Oracle® Database Upgrade Guide 10g Release 2 (10.2)" - section Moving From the Standard Edition to the Enterprise Edition.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref10
    The problem is that after update from St. edition to Ent. edition when I run:
    select * from v$version - I see :
    Connected to:
    Oracle Database 10g Release 10.2.0.1.0 - Production
    while I expect to see something like .....
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining Scoring Engine options
    Am I wrong ? Why information in view v$version does not update after this ?
    Regards,
    Phil
    Message was edited by:
    user585467

    In your document you refer to the upgrade guide, this upgrade guide applies when you are upgrading from previous Oracle releases to 10g, not SE->EE.
    If you want a procedure to upgrade the SE to EE, then follow this metalink note:
    "How to Upgrade from Standard to Enterprise Edition ?
    Doc ID:      Note:117048.1"
    If you performed this specific upgrade and you still see this error, then probably you are facing a bug, similar to the one described in "5844095", where the version is changed form SE->EE after 10.2.0.3 patchset application.
    In your case it should be enough to apply 10.2.0.3 patchset to show it properly.
    ~ Madrid

  • How to set up the inspection plan for the material in super BOM

    Hello,
    how to get the accurate inspection plan of the IQC for the material which was class item in a super BOM?
    I've gotten the characteristic value from the sales order, and get the PO after MPR. The problem is how to specify the target value and the range of inspection characteristic in inspection plan, because the value is temporary?
    Thanks!
    Lin

    Hello,
    I think you need to create MIC which linked with the configuration characteristic, and specify "inspection by configuration" for the inspection type.
    then the configuration value in the sales order can be transfered to the inspection lot when production released or goods receipts if you use inspection type 03 or 04. that means the value range for the MIC will be determined dynamically for each sales order.
    Regards, Winnie

Maybe you are looking for

  • Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

    Hello, I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation. While viewing this Info structure S008, I c

  • ITunes Media Folder Frustrations

    Hi, I hate, hate, hate the way that iTunes sorts the library for you into Artist/Album/Song. While this is useful if you have many tracks for an artist but three folders for just one song is ridiculous and results in songs that you know, being squirr

  • WCF Data services remove miliseconds from DateTime when expand

    I get some strange behavior, when using WCF Data Services 5.6. In my case, I have table, with 1 column set with Concurrency=Fixed, and this column hold date time field from database, updated each time when row is edited. In case I just retrieve entit

  • Help for inserting/updating new record

    hi, i am trying to insert new data in account record in CRM OD from java using (web service v2.0 ) following methods AccountInsertInput accountinsert=new AccountInsertInput(); accountinsert.setListOfAccount(accountDataList); Here accountDataList is o

  • Properties panel - bug -- does not appear --

    I have just started experiencing this problem im running xcelsius 2008  vs 5.1.1.0   build number 12 1 1 3 44 the properties panel all of a sudden no longer comes up when a component is double clicked or right clicked or alt entered what is going on?