Material Master Classification view

Hi all,
I have some doubt in Material Master Classification view.
I want to know the Database Table name in which the field Class Number
is  stored.
I know that these tables are stored in the stucture ( RMCLF
)  during creation of material master.
Thanks in advance

KLART is for Class Type & not for Class number ...
also i need the table where i can see it ...
Thanks in advance

Similar Messages

  • Batch Determination in SD - Need for Material Master Classification View

    Hi!
    Is it mandatory to have the classification view of the material maintained to enable expiry date based batch determination at delivery creation?
    I have configured BD for the delivery. When testing with a material for which the classification view is maintained, the batch is determined. When testing with a material for which the classification view is <b>not</b> maintained, the batch is not determined.
    Appreciate that this may seem like a strange question given what the testing shows but I am working with a colleague who is adamant that the classification view on the material master is not required.
    Any casting votes would be much appreciated and rewarded accordingly. Thanks, Duncan

    Classification of batches is mandatory if you want to use the batch determination feature.
    source: http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm

  • Material master classification view mandatory

    Hi All,
    Can we make classification view required for any material creation using MM01. 
    We want the user to maintain a value in the classification view before the user is allowed to save and create a new material. 
    Any help would be greatly appreciated

    Hi SAP friends,
    I found a solution to this problem.
    Use the user exit EXIT_SAPLMGMU_001.  Call the function module MAIN_PARAMETER_GET to get the PSTAT (maintenance status) during material master creation.  If PSTAT does not have a 'C' value, then it means the classification view was not maintained.
    To check further if a class type and a class was maintained in the view itself, call the function module CLAP_DDB_ALLOCATION_FR_BUFFER.  Pass the value 'MARA' to the PTABLE parameter and the corresponding CLASSTYPE (could be '022', as is my case) and the I_CLASS ('FIFO_BATCH' in my case).  This function module will return the T_ALLOCATIONS table.  If the table is blank, it means no class type and class were maintained.
    Then you can just display the appropriate error message.
    Hope this helps.
    Aileen

  • Material Master - classification view - URGENT

    I am coding a proxy for Material master creation. I have done for all the views except for Classification view. Can any one tell me how to start coding for this view.
    Thanks,
    -Naveen.

    Try function module CLFM_OBJECT_CLASSIFICATION. You cannot do a BDC for it. You can also try standard programs  RCCLBI03, RCCLBI02 or RCCLBI03 but they may not be relevant in your case.

  • Inspection Characteristic in the material master (Classification)

    Dear All,
                  Please anyone tell me the cycle for maintaining the characteristics in the material master (classification tab) using batch classification.
    or give me a link for the same.
    regards,
    Rishabh

    Hi Rishab,
    Below links can help you
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/content.htm
    http://scn.sap.com/thread/1783839
    http://help.sap.com/saphelp_470/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
    http://scn.sap.com/thread/2046143
    http://help.sap.com/saphelp_46c/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
    below steps will help
    Creation of Batch Class in (CL01)
    Assignment of above created classed characteristic to the Batch Class at the time of class creation. (CL01)
    Assignment of batch class to material master in classification view. (MM01)
    Creation of MIC with reference to above created Class characteristic (QS21)
    Creation of inspection plan with above MIC (QP01)
    Follow your business process cycle for creation of inspection lot
    Result recording and usage decision (QA32)
    You can see in MSC2N that batch characteristic will get updated.
    Best regards,
    Sharat

  • Could sap do mass craete/update for material master classification?

    Hi Expert,
      Now we craeted new classifcaiton for material master. It need be assigned to related many parts. May I query Could sap do mass craete/update for material master classification? How to do this ? 
    Thanks
    Alice

    Hi,
    Another option is using LSMW, please refer to below thread for more details:
    Classification view in MM01 with LSMW
    cheers,

  • Change documents of material master classification class type 001 and 300

    Dear guru ,
    I want to see the history of change documents of material master classification using MM02.
    The system allow to see the history only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    I must do some settings or the function for these class type arenu2019t available ?
    Thanks.

    Dear ,
    changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    Thanks.

  • Interactive ALV to report to get into Material Master Sales View

    Hi,
    I want to know way to get into Material master Sales view from an Interactive ALV report.
    In the output we have (custom report for Sales) the Sales Order item information. If the user double clicks on the material, it should directly goes to the Material Master Sales org 1 view. I can able to get to MM03 initial screen to display the list of views, but it would be better we can use the Plant, Sales Org and plant info from Sales Item to get into the material master Sales view.
    I checked that this functionality is there in the standard code. If you double click on the material in Purchase order display(ME23N) from the item level, it is directly getting into Material Master Purchasing view. Is there a way to achieve this.
    Your suggestions would be appreciated with points. Thanks!

    Hello,
    Yes, it's possible using the CALL TRANSACTION command with the addition AND SKIP FIRST SCREEN. The only thing that you need is to fill the fields from the first screen (SET PARAMETER command).
    DATA: carrid TYPE spfli-carrid,
          connid TYPE spfli-connid.
    SET PARAMETER ID: 'CAR' FIELD carrid,
                      'CON' FIELD connid.
    CALL TRANSACTION 'FLIGHT_TA' AND SKIP FIRST SCREEN.
    Regards.

  • Material Group field is Missing in Material Master - Purchasing view ?

    Hai Experts,
                      I want to configure to bring back Material Group field is Missing in Material Master - Purchasing view.  It is mandatory to Create & save a master. I cant save a master in sandbox. Need Help..

    I make all field as Optional & Create master successfully.. Thanks.. I even verfied in J1ID Master for assesable value &  Chapter ID Combination.. But in Cenvat Determination Field,  How i can set Default Indicator for Modvat "tick" & how can i set Excise Intimation Date also.
    I checked Material Master in mm03 [ Display].
    I clicked More & Pre Vals. option in  Foreign Trade Import.
    For More, It shows this error.
    Record 21 MORE  does not exist in table T133E
    Message no. M3748
    For Pre vals., It shows this error.
    Record 21 J1PR  does not exist in table T133E
    Message no. M3748
    Kindly guide me..
    Thanks & Regards
    Swetha

  • Pricing based on Material Master Classification

    Hi Guru's,
    Can we have a pricing based on material master classification.
    Scenario: Material can have few characteristic. If we select few of the classification, this should influence pricing.
    Any idea on this, has anybody worked on this before?
    Thanks,
    Anil

    I am not sure about classification, might work with Variant Config.
    Alternatively, you can use split valuation if you don't have many characteristics.
    Hope this helps-

  • Material master - accounting view 1

    Hi experts,
    I forgot to mention the standard price in accounting 1 view before saving a newly created material and now the field appears greyed out when I try to enter the value in MM02. Is it possible to fix this issue?
    Thank you very much for your time.

    Hi Sethuraman,
    If Price control for the material is maintained as V, then using MR21 price can be maintained. In your case price control is 'S' Standard price hence standard cost estimate to be run for updating the standard price in material master.
    Below is the procedure to do standard cost estimate and update the standard price in materials master:
    Prerequsites:
    BOM and Routing Master data.
    Rates in KP26 for Activity Types for the combination of cost center and activity types in the restective period.
    Procedure:
    Go to tcode CK11N - Ente the Material number, Plant, Costing Variant and Costing Version and press enter twice.
    Material wise and activity wise cost details will be displayed. If any error are there click on error log for rectifying the same.
    Click on SAVE for saving the cost estimate.
    Now you need to mark and release the cost estimate. Go to tcode CK24. Enter the period and year. Eg; Current month - 3 and 2014.
    Enter the company code, plant and material number. Un check  Test run.
    Click on Marking Allowance. Another screen will come -Select the company code another pop up will come -enter the costing variant and SAVE. Come back and click on the execute button on previous screen. Message will be displayed as " materals cost estimates were updated succesfully". Come back to initial screen.
    Click on Release on application tool bar. Then click on Execute button. System will display the message as 'Price Document updated". Come back.
    Now Go to Material Master - Acounting view standard price gets updated.
    Thanks & Regards,
    Ramagiri

  • POP up in material master when viewing classfication tab

    Hi All,
    I want to use change master for chanigng the charecterstic value.
    i did setting for class type 001 to include  the charcterstic value changes using change master.
    when i am trying to go to material master classification tab it is asking me to populate the change number.
    can you please help in understanding is this standard to get a pop up or is there any way i can get rid of this pop up
    my change number is not yet implemented
    Thanks in advance

    Hi Thanks
    but i want to make changes uses change master to characterstic value
    i made the changes yet they are not implemented so i should not be seeing them untill change master is activated
    the pop up is showing me the state after implementing change master
    thanks

  • Change History of Material master classification data

    Dear all.
    How can we see the change history of the Material master classification data.
    Whether any standard report exists which can give this Change History data or whether we can find from  any tables?
    Please let me know your thoughts on this
    Regards
    Shyam

    changes in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
    change history for classification is only stored if you activated this.
    if  it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system
    it has instruction how to active it.

  • How to assign multiple batch class to material in classification view

    Dear Gurus,
    How to assign multiple batch class to material in classification view.
    plz explain what are the procedure and what are the configuration required before assignment.
    Thanks
    Mani

    OK, Thanks for your reply.
    Regards
    Mani

  • Use of Standard Class in Material Master classification

    Hello Experts,
    Can you please explain me the significance of 'Standard Class' option in classification view of material master?
    When I click on F1 it gives following info (which I can't understands completely)
    A standard class allows you to access all the information on classification and characteristics for an object when you use the object, without having to select one of the classes it is assigned to.
    Can you please elaborate more on this?
    Thanks in advance,
    Vijay.

    Hi Anamika,
    Thanks for your feedback.
    Actually my question is why there is option of 'Standard Class' provided in classification view. If multiple classes are assigned to given material then we can select only one class as a standard class. What is the use of selecting a class as a standard class??
    Thanks in advance,
    Vijay.

Maybe you are looking for

  • Got error(JS alert message) that "Given key was not present in the dictonary". After clearing history error gone. Not getting answer?

    I have asp dotnet website and when I am log in into it then I got an js alert message i.e. "Given key was not present in the dictonary". When I am going to clear clear browser history then it working fine without error. We know it thats why we are cl

  • Frozen price in material ledger

    Dear all, I need to have some informations about frozen price functionality in material ledger. In particular: - what is frozen price? - where in customizing it is set? - what is the system behavior using frozen price during production order confirma

  • Audigy 2 card with Audigy 2 ZS drivers and Live Driv

    I recently bought a Li've!Dri'veII bay for my system. To use this I plugged it into my Audigy 2 Value card which I have had for about 2 years. The bay came bundled with a SoundBlaster Li've! Platinum. I tried to install my drivers, but as a Platinum,

  • Merge multiple rows of same ID into Single row

    Hi All, I need the requirements of merging multiple rows of same ID as single row. My Table Data: ID     Language1 Language2 Language3 Language4 1001 NULL         JAPANESE  NULL          NULL 1001 SPANISH   NULL          NULL          NULL 1001 NULL 

  • SDM Login ERROR

    hi when i click on RemoteGUI.bat in C:\usr\sap\J2E\JC02\SDM\program it gives me a log on screen to login to SDM GUI here i enter my pwd of Administrator but it gives me a ERROR saying Login Attempt Failed ERROR "Could not establish connection to serv