Material master direct input - LSMW

Can anybody please send me documents or screenshot on material master direct input method
0020
RMDATIND
D Direct Input
[email protected]

HI,
just follow up d link ,it iwll provide u step by step solution to your problem:-
http://****************/Tutorials/LSMW/LSMWMainPage.htm
or
http://****************/Tutorials/LSMW/MMDIM/page1.htm
if u find it useful,den plzz do give points also.
regards,
ric.s
Message was edited by:
ric .s

Similar Messages

Material master Upload with LSMW

Hi
When I make Material master Upload with LSMW, I could not find any entry in planning file.
Please explain.

Mayuresh,
Not all LSMW transactions properly update Planning file.
You can run transaction MDAB to set up planning file in Background
You can run transaction MDRE to detect and correct Planning file inconsistancies in Background.
It is probably a good idea to run these jobs periodically, say, weekly, in most production environments.
Regards,
DB49

Problems in Material Master Upload by LSMW

Dear Experts,
The question was asked to me in interview, What Problems you face while uploading your material master data by LSMW ?
Please give me some information on this question.
Thanks in Advance

hi,
Check the link it would be usefull:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c5/213c487a3c11d3bc8100105a6588b2/frameset.htm
Hope it helps...
Regards
Priyanka.P

I want to upload material master (MM01) using LSMW with BAPI method

I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar n

Hi,
The business object is BUS1001.
Thanks,
Murali

What is the standard program for Material Master upload using LSMW

Dear All
I am trying to use the MM upload using DATMIG_INF4. I want to know what are the different standard projects that are used for Material master upload.

Hi Amol,
You can load the material master using direct input method in LSMW ,details of which are as follows:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Please revert back in case of any doubt.
Cheers
VJ

Transferring MATERIAL MASTER DATA USING lsmw

I am using LSMW to transfer material master data from text file using direct input program RMDATIND. The problem is that the field WRKST in screen is of 48 characters while the batch data structure BMMH1 of field WRKST contains 14 characters. How can we transfer the full 48 characters in text file to THE FIELD BMMH1 IN DIRECT INPUT PROGRAM. Can we write any translation or routines . If yes, how is it possible. I can do the same using BDC but our client is already using the LSMW , only the new field WRKST for material has to be inserted. It is picking only 14 characters.
Regards
Debopriyo

Hi
Kindly use the sap note 351557 it is applicable for your release
if you have any further clarifications let me know
Regards
Damu

Help reqd on Material Master uploading in LSMW by view steps....

Hi all....
Pls understand my requirement and post ur replies...i dont need the basic LSMW learning steps for MM,Vendor etc.,like that...
My problem is...im want to upload my material master datas by steps like 1st i want to uplaod the basic views 1&2 for all the material types in one shot...
next thing i want to load the other views like purchasing sales mrp plant qm accounting etc., in single shot......like screen to be extended formats....im mm01 or by mm02...
when i did....no problem i've faced upto MRP loading...but the next view like plan,QM,accounting is not coming when recording in RUN batch input session..it says..."the material has been already extended and no input was given for this screen"....
Hope u understand,my problem....
if u have answers...pls post me on urgent basis.....
thanks...
sankar

Create purchase requisition by LSMW

Problem in material master upload using LSMW

Dear All
I am trying to upload material master using LSMW (batch input recording).
I am facing problem while doing 14 step (Run Batch Input Session). When i'm running the batch input session, on the Create Material (Initial Screen), system picks values for material code, industry sector & material type but gives error message "select at least one view". system is not allowing me select the views which i selected while recording. system allows me to select all the view which i don't want.
why system is asking me to select the views and also how to select the required view?
thanks
manoj gupta

thanks charu
do i need to do complete LSMW steps fpr all the view separately? if i do LSMW for basic view1, for other view do i need to go for change TCode or create T Code?
thanks
manoj gupta

Material Master Upload though LSMW - How to add new custom segments to LSMW

Hi,
I have an existing LSMW to create material master idocs (ZMATMAS) from legacy file. Now I need to add new custom segment under E1MARCM, for example say ZMARC1 which will have 2 new custom fields.
1. I created the segment through WE31 and released it.
2. I created an extension to ZMATMAS using WE30 and released it.
Now Im trying to change the LSMW so that I will have the new segment ZMARC1 under E1MARCM so that I can do the field mappings. But I am not able to get it done. i.e. I dont know what should I do so that I can get the new segment in LSMW.
I tried giving the extension in the first step of LSMW. i.e. Maintain Object Attributes but its not allowing me to give an extension. Do I need to add to the basic type ZMATMAS05 and release it to get it reflected in LSMW.
Please give your suggestions.
Thanks a lot in advance.

Hi
U can not add u r 'Z' program in Maintian attributes of LSMW.
But U can create the BAPI and assign Business object, Then u can use u r Business Object in Lsmw.
Regards,
Raghu.

Accounts Receivable Upload - Direct Input LSMW

Hi All,
I am using the Direct Input method for uploading AR data. Here we have 2 posting keys. One does not have profit center and the other has profit center. I have used the approach of header file and item file where the items are linked to the header by the position number (first field in both files). I have mapped the PRCTR from the structure BBSEG to the source field.
When the batch input session is run from SM35 the records go into error. This is because the LSMW is looking for the PRCTR (profit center) field even when the item does not need the profit center and so does not display it.
I want to know what is the approach you have followed to resolve such an issue. Because of the mapping the LSMW is looking for PRCTR even when it is not displayed for some line items (depending on posting key).
Looking forward to prompt replies. Thanks,
kajal

Hi All,
I found a solution. Need to put in a rule for the field and code it as '/' whenever want to skip it.

AS91 error direct input LSMW

Hi all
I created an LSMW project for tcode AS91 using Direct Input method. I am encountering an error saying that "No valid cost center was entered". This error appears although there is a const center entered in the upload file. What would cause this error?
Please help
Thanks

Is the cost center mapped correctly to the target field? Make sure the cost center has been created for a validity period that matches the period of the time dependent asset data you are loading.
Edit: just found out that the cost center must be valid on the day after the day of migration as in T093C-DATUM, please doublecheck in table CSKS or via KS03.
Thomas

Material Master upload problem (LSMW)

Hi
I am using Standard Batch input program (RMDATIND) for MM upload i need to validate the old material number if it is already existed in MARA it should throw an error at the end of the processing saying that "Old material number" already existing in MARA . Flat file will have thousands of records.
One solution like, we can move all the error records in one internal table in code of Filed mapping conversion rule step , but the problem is where we can write the error records?
Another question when we use Standard program for conversion is it possible to show error log at the end of the processing?
Its very urgent Kindly help me ........
Rgds,
bhanu.......

Hi,
YOu can populate error messages in LSMW. To achieve this you add code in LSMW. Follow the below procedure to add code in LSMW.
In Display FieldMapping and Conversion rule Step of LSMW click the button Display Variant. A screen will pop up. Check the boxes - Global Definitions and ABAP Sub Programs. This will allow you to add code in LSMW.
At check the error records follow the below mentioned procedure...
<b>Error messages in the conversion log</b>
How can user-defined error messages be added to the conversion log?
1.     Use of WRITE command in the Coding
a.     Example: WRITE: Error during conversion of field xxx
2.     In the editor use Insert -> Message to use a message already existing in the SAP system.
a.     Example (Coding after using the menu function and filling the fields):
WA_ERRORTAB-ID = '/SAPDMC/LSMW'.
WA_ERRORTAB-MSGNO = 012.
WA_ERRORTAB-PAR1 = 'A'.
WA_ERRORTAB-PAR2 = 'B'.
WA_ERRORTAB-PAR3 = 'C'.
WA_ERRORTAB-PAR4 = 'D'.
INSERT WA_ERRORTAB INTO TABLE G_ERROR_TAB.
The message will be added to the log.
For further reference click the link below
http://www.erpgenie.com/sapgenie/docs/Lsmw.zip.
Regards,
Vara

Re:Uploading of material master data using lsmw-idoc method

Hi friends,
While processing each idoc one log on window is opening,and status of idoc is 51,eventhough i am passing material description to maktx of e1maktm,it is showing an 'No description is passed'.
Colud you please tell me how to correct these errors,i am new to this lsmw-idoc method.
Thanks in advance,
Anusha.

Thank you for reply.
Actually I am uploading the data in flat file from file port to sap.
In idoc inbound processing of lsmw i have created a file port and iam giving the logical system name of the same client.
is this the correct procedure.
Every time when i process each idoc one new logon window is opening and it is showing idoc status as 51.
could you please tell me how to correct this one.

Changes in standard input/direct input-lsmw

hi,
lsmw uses standard program to copy customer data or vendor data, but there might be a case when the tables..i.e. vendor and customer data are not same,
some field might be added and some might be deleted..
how do v go about that...
do v need to make some changes to the standard program....
if so, then what are the changes that need to be made...
also is there anyother method to migrate data.
thanx in advance

generally when some fields are added to the standard tables, they are appended at the end. so basically it will not affect the standard program flow.
If you are facing any specific problem, please put it down.

Lsmw : Direct Input : 0020 Material Master :Error

hi all !
I'm onto making a lsmw for material master direct input.i'm facing the following error :
1.The field Marc-LADGR is defined as a required field : it doesnt contain an entry
2.You have not fully maintained the tax classifications.
in my flat file i have duly filled in the field MARC-LADGR
need help ,plz see if you can track wats the problem.
thanks and regards,
sachin

ya sachin ... as u r telling .. download from the std program... & continue the process....
my suggestion ... cross check again with ur fields of the source structure ....i mean decalre only fields .. which are required .. then do the field mapping again for the all the fields...
i believe there will be documentation for the std program .... check it & go thru with that ..map it ... wherever needed ....
try & let me know...
thanks,
manjunath ms

Material master direct input - LSMW

Similar Messages

Maybe you are looking for