Material Master screen at right top corner lock button is display ?

Hi
Please guide for the function of lock button at right top corner -right side of check scren data
If you click system shows lock relevant field in display mode .how to make this in change mode.
if you enter system shows material is locked but we can create PO against that material also.
Thanks for response
AJIT

If a particular field is locked in the material master, then you can unlock it . Follow the path in spro-logistics general-material master-field selection-define lock relevant field. Make the required settings.
Thanks

Similar Messages

What is the shortcut to maximize window (full screen) which is normally done by pressing " -- " like key on the right top corner in macbook pro ?

What is the shortcut to maximize window (full screen) which is normally done by pressing "<-->" like key on the right top corner in macbook pro ?

There's no <--> key on ANYones keyboard. (Great answer Shootist )
The other part of his answer is only applicable to certain windows (browsers specifically) as there is NO system wide maximize command in the manner you are asking.
Apple's "maximize" function (green +) simply maximizes the window to the content, not the screen.
For other keyboard shortcuts (and of course they may be outdated) try: this

There appears a blue strip on the right top corner every time I unlock my phone or when I open an app. It's been four months since I got my 5s! Is something wrong with the screen?

I've been using my iPhone 5s for the past 4 months. Now suddenly, I've been seeing a blue strip on the right top corner of the phone. Should I be concerned about the screen? Is there anything wrong with my display? I'm still under warranty.

Take it to the Apple Store.

HD icon moving to the very right top corner of the screen after startup...

Hi everybody,
this is apparently an old problem in Mac OSX (I have found only very old posts) that should have been resolved already. It happened to me sometimes that, after startup, the HDD icon, which is normally on my right top corner, moves by itself to the very top right corner almost behind the upper bar (almost at behind the magnifying glass of spotlight). In the finder preferences I have forced the snap to the grid option a long time ago and it seemed to have solved the issue but not! it is not the case.
I have the feeling that this happens at some starts (not the very first one) after making ONYX maintenance but I am not sure of that.
May you please tell me if other people have already encountered a similar problem?
It is not a virus or malware, is it?
Cheers

It is not a virus or malware, is it?
oh, please don't even mention viruses. there aren't any OS X viruses and what's happening to you is decidedly not a virus or a malware. you have a minor corruption of finder preferences or of the desktop DS_Store file.
reset your finder preferences. delete the file home directory/library/preferences/com.apple.finder.plist. then control-option-click on finder in the dock and choose "relaunch". next close all finder windows, and delete ALL .DS_Store files on your hard drive using ONYX http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
start ONYX, go to maintenance->rebuild and delete .DS_Store files. then restart and set up your desktop as you want. it should stay put from now on.
Cheers

Material master screens requirement

Hi guru's,
I've a unique business scenario and would like to get your inputs on this.
Here is my business scenario:-
Our material master screens/tables are hugely customized. We have lots of custom fields on mara, marc, mvke and mbew. We have been using custom screen sequence (yz) for material master for a long time and not any of the SAP provided standard screen sequences. Lot of the these custom fields are put in yz screen sequence screens. We have lot of materials on production with these custom fields populated. We got a business requirement to activate material ledger now and requirement is to put back 21 standard screen sequence. But 21 screen sequence doesn't have any of the custom fields.
I know one way is to setup new screen sequence(copying 21) and put these custom fields but I would like to get your expert advise before moving forward.
What are other ways to achieve this ? Any easy ways ?
Can we just modify accounting view on yz ?
What other impacts are we going to have for material ledger activation from MM point of view and during go-live ?
Sorry I've not worked on Material ledger activated environment before.
hope to hear some inputs.
Thank you in advance.

can anybody post their input please ?

In Material Master Screen,functionally what is Picking Storage type in the

In Material Master Screen,functionally what is Picking Storage type in the Warehouse Management Screen.Pls explain its functionality

This indicator points to the customizing of picking strategies. This way SAP knows which picking strategy to take for a particular material, as the picking strategy may differ from material to material

In Material Master Screen,functionally what is BAckward Consumption period

In Material Master Screen,functionally what is BAckward Consumption period & Forward Consumption period in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.

In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.Pls explain its functionality

THis indicator will define whether the material is available for the following....
Subassembly planning with final assembly
Gross requirements planning
Subassembly planning without final assembly

In Material Master Screen,functionally what is Requirement Group in the MRP

In Material Master Screen,functionally what is Requirement Group in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

In Material Master Screen,functionally what is Safety time and safety time

In Material Master Screen,functionally what is Safety time and safety time indicator in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

In safari I was not able to wish my frnds on their bdays in event section of facebook right top corner.. Is there any way to fix this..

In safari I was not able to wish my frnds on their bdays in event section of facebook right top corner.. Is there any way to fix this..

Why not use the Facebook App?
See: https://itunes.apple.com/us/app/facebook/id284882215?mt=8

Material master screen

Hi Experts,
How to go to material master screen in SAP ECC6.0 and how can I choose information on material (1300-260, IDES system)?
Thanks,
Manjujay

Hi,
Use transaction MM03 SELECT MATERAIL selectVIEWS Basic / Purchasing whichever you want to view
Put the plant 0001 in IDES and storage 0001 and you can see material master
Thanks
Diwakar

Addition of new TAB at Material Master screen

Hi Experts,
I want to add one new tab in between "Descriptions" and "Unit of Measure" tab (under "Additional Data" section in material master). That should hold few language dependent "Brand and Product" data. But, I have no idea is it possible or not.
Please let me know the process if it is possible.
Thank You.

Transaction Code - MM01                     Create Material &
Exit Name           Description
MGA00001            Material Master (Industry): Checks and Enhancements
MGA00002            Material Master (Industry): Number Assignment
MGA00003            Material Master (Industry and Retail): Number Display
No of Exits:          3
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

My iphone is stuck on setings screen, not frozen but my lock button is broken

Last night, while trying to clear room to update, it stopped allowing me to go out of the settings app. my home button is not broke, but it didnt work.. My lock button IS broke, and i use the Assistive Touch. It wont allow me to open recieved messages when the pop up on the screen or answer calls.

Without the lcok button you will not be able to reset.
You need to get it repaired.
You can try waiting for the battery to die and see if it boots up normally after charging.

I have light leaking from the right top corner of my iPhone 5.is it a problem or a major thing. Is there anyone, who hasn't got this problem?

I noticed light leaking from the top right corner of my new iPhone 5 from a small area. I noticed first, when I changed the brightness to higher and when I changed back the light was still there.

Personally I would take it to the Apple Store cause the iPhone is still under warranty. You should try your carrier first if your not near an Apple Store and then go from there based on what help or lack of help they provide.
Best of luck.

Material Master screen at right top corner lock button is display ?

Similar Messages

Maybe you are looking for