Material Master --View's wise mail sending for further process

Hi all workflow guru's,
I am trying to implement workflow for material master creation 'WFMaterialtest'.
the business requirement is that for certain material types when Basic Data1 and Basic Data2 views have been created by USER1, a work-item needs to be send to USER2 to create Purchasing View, then to USER3 to create MRP views and then USER4 to create Sales related and then to USER5 to create Accounting views.
for this requirement I found,
BUS1001006   Standard material and
BUS1001      Material.
till now i didn't created a W/F from scratch.
Please help me out to sort the requirement.
regards,
abdul.

Hello,
Sorry, the purpose of this forum is not to help people create a workflow from scratch.
Please take a workflow course and/or read a workflow book and then try it yourself. If you run into problems, let us know.
regards
Rick Bakker
hanabi technology

Similar Messages

  • Material Master views for every material type

    HI Expertis,
    I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
    As an example, for the material type "FGTR" what should be the required views to create material master?
    From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
    Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
    these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
    I would be gratefully thank u, if u can guided me on this matter.
    Thanx & Regards,
    Rashika.

    Hi,
    You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T   .From this tables ,for each material type, you get all views.
    User department Maintenance status
    Work scheduling A
    Accounting B
    Classification C
    MRP D
    Purchasing E
    Production resources/tools F
    Costing G
    Basic data K
    Storage L
    Forecasting P
    Quality management Q
    Warehouse management S
    Sales V
    Plant stocks X
    Storage location stocks Z
    hopw this will help you.
    With Regards,
    Jaheer

  • ADD subscreen for material master view

    dear all,
    kindly tell me from where i can add subscreen to material master view. also tell me from where i can see which industry material master is activated
    Regards,
    qsm sap
    Edited by: qsm sap on May 3, 2008 9:42 AM

    Hi,
    Follow the path below:
    SPRO --> Logistics - General --> Material Master --> Configuring the Material Master
    Here you can maintain the Mainscreens, Secondary screens etc..
    SPRO --> Logistics - General --> Material Master --> Basic Settings --> Material Types --> Define Attributes of Material Types.
    here you can activate the Material Tab Pages with refernce to your Material Type.
    Hope this helps..
    Regards,
    Siva

  • Creating Material Master views

    Hi Experts,
    I am writing a program to upload material master views.
    From that program i am getting the file as output and by using RMDATIND program(Direct input program) i am uploading that output file to that program and creates the material when it does not exists and if the material exists it will check the particular view that i want to upload.
    In doing this i got one question that, i am checking the field VPSTA in MARA table for the views that are created to that material.
    That field contains the values as EDALS.
    E for PURCHASING VIEW
    D for MRP VIEW
    A for WORK SHEDULING VIEW
    L for GENERAL PLANT DATA
    S for WAREHOUSE MANAGEMENT VIEW
    I want to know the characters for the other views also.
    Can any one give information for that views.
    Thanks,
    Kruthik.

    Hi,
    Work scheduling A
    Accounting B
    Classification C
    MRP D
    Purchasing E
    Production resources/tools F
    Costing G
    Basic data K
    Storage L
    Forecasting P
    Quality management Q
    Warehouse management S
    Sales V
    Plant stocks X
    Storage location stocks Z
    Rgds,
    PB

  • Tax Code in Material Master views

    Hi,
    I want to know in which view we can find the details of  "tax code " for the material in Material master views?.
    Also suggest me where else we can find the information of Tax Code for the given material.
    Thanks

    Hi,
    you cannot get the tax code in material master. In material master we mainatin tax releated information in Foregin trade import and to get that contaol data tab in material master you have to do some config.
    After mainatining the data in material master tax code is maintained in FV11 in case of taxinn and in case of taxinj tax releated data is to maintaiin in J1id and different tax code has to be created with the help of FTXP
    Plz let me know if any further information is required

  • Fields in material master views related to costing

    Hi All Gurus,
    In Material Master Views
    Can you suggest the fields or indicators according to MM point of view,
    which should be given or  indicator to setting on.
    Rgds
    Ana.

    Hi,
    For accounting view.
    If material is FERT or HALB: -
    Enter valuation class,
    Price control as "S"
    Standard price(If you have run costing for FERT & HALB then not enter standard price because at the time of costing run system calculate standard price of product).
    For ROH, VERP, ERSA etc...
    Enter valuation class,
    Enter price control as "V",
    Enter moving average price.
    Regards,
    Mahesh Wagh

  • How to send the dynamically generated XML file to other site for further processing?

    I have a question regarding exchanging data between two systems
    using XSQL servlet. The situation is descrbed as the follows:
    Assume that we have a simple XSQL page named "emp.xsql"
    <?xml version="1.0"?>
    <?-- XSQL page file "emp.xsql" -->
    <xsql:query xmlns:xsql="urn:oracle-xsql" connection="demo" >
    SELECT * FROM EMP
    </xsql:query>
    and we can access it through the HTTP request likes
    http://web_server_name/xsql/emp.xsql.
    Usually we will the returned dynamic XML file and show it on the
    screen. Now the problem is that we don't want to show the
    generated XML file on the calling screen. Instead, we want to
    send the generated XML file to other website for further
    processing, say, using JSP or ASP likes
    http://other_web_server_name/XMLProcessing.jsp?.....
    How can it be implemented using XSQL servlet?
    Any hint and outline of the solution is appreciated.
    Thanks

    Ike,
    Do you have a sample. I am searched so much in this forum for samples. I looked on SAX Parser. I did not find any samples.
    Please help me.
    Thank you for your posting.
    Padma.

  • How I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

    how I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

    If all you need for further editing is the contents of your Timeline,
    then you should follow Harm's sage advice.
    Lagarith Lossless Video Codec
    http://lags.leetcode.net/codec.html
    Ut Video Codec Suite
    http://www.videohelp.com/tools/Ut-Video-Codec-Suite
    But, if you will need all of your source media files to continue the edit,
    you should consider using the Project Manager.
    Trim or copy your project
    By using the Project Manager, you will be continuing the edit
    with the original media files and there will be no quality loss.
    Be aware that once you have edited the project in CS6,
    it will be problematic (but not impossible) to return to edit in CS5.5.

  • Blocked for further processing.

    hi every body
    plz can anyone tell me
    How to classify an item as 'Fast' or 'Slow' moving? There is a requirement to ensure that any PO with a slow moving item is automatically blocked for further processing.
    thank u
    mahesh

    hi,
    \i dont think u have any such option in standard SAP.
    how ever u can block the material for further purchasing, once u have the list of slow moving items, considering the last consumption pattern.
    once u block the same u will get the message while creating the PR / PO

  • How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing

    How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing?

    You can't.  (http://www.macworld.com/article/2057972/imovie-for-ios-projects-no-longer-work-o n-the-mac.html)
    Geoff.

  • Exclude Material Master views in IDoc

    Hi,
    I am using the MATMAS04 IDoc to replicate material master data from one client to another (two clients in the same system). I need to exclude the MRP I-IV views and the Storage Location views - except for these views the data in all other views should be replicated in the target client. Is there a way to just disable the data for these views in the Idoc? I have checked the various segments, but was not able to find any flag/field to disable views selectively.
    Please help.
    thanks,
    ram.

    Hi Ram,
    I am not familiar with Idoc type MATMAS04. I guess you are using a later version of R3.
    However there is a segment filtering functionality for IDocs which you can use.
    As an example , I will use IDoc Type MATMAS03. This idoc type has a segment E1MVKEM which stores the Sales View data for the material. This segment is not a mandatory segment and hence it can be filtered when sending the idoc downstream.
    In BD64, for the distribution model, create a filter. The filter should be set to check the contents of Sales Org  field. Then set the filter to a value which you are never expecting to find in VKORG field.
    What happens is this: A master idoc will be created with all the views ( meaning all the segments ). During the filtering stage, the filters set up in BD64 will be checked. If the Sales Org in the idoc does not match the Sales Org in the Filter, the E1MVKEM segment will be deleted in the idoc.
    A similar approach could be used for the MRP views and Storage Location views in your idoc.
    Thanks,
    Urmila

  • Updation of Material Master Views

    Dear All,
    I am facing a design problem in creation of Material Master.
    A certain user group creates X,Y,Z views in MM01 , MM02 but the other views data which would be of relevance to other users needs to be updated based on certain conditions like Material Type etc.
    Eg : PLM user making Basic Data view .
           FI views and Sales View to be created automatically for other users.
    The issue is this <b>updation of data in other views</b> which is of two categories :
    i) if material type = 'abc'.
          MRP profile = 'fgh'.
    ii) if material type = literature.
       then plants = '1111', '2222' , '3333' etc....
    Regarding i):-
    This data can being updated in a user exit , eg '<b>MGA00001</b>'  called in MM01.
    But it <b>doesnot allow to change any other structure other than WMARA</b> where as we need to update data for WMARC, WMBEW, WMVKE etc.
    Regarding ii) :-
    How can I create material on <b>many plants while the material is under creation in MM01</b> ?
    How can i) and ii) be cracked ?
    Pls give solutions asap .
    Rewards are sure for helpful answers!!
    Regards,
    Shweta

    >
    zkarnalkar wrote:
    > Hi,
    >  I have a requirement, insted of user authorization conept, we wanrt that the user can view only the assign views of material master to that view
    >
    > e.g  if user is ABC, this user whenever display or chnage matetial master he can only view the screen of basic data nad purchasing,  and if user XYZ login with MM02 or MM03  he can only view the Basic data, work scheduling and accounting view not the remaning can we control this with customizing,  also   How we can  find alll the authorization obejct releated to material master screen,  or related to one transaction.
    >
    > regards,
    >  zafar
    To know the authorization objects of material master screen, check the following link on my blog
    http://aroopsnotepad.wordpress.com/2010/09/09/material-master-authorization/
    To find all authorization objects for a transaction, you can try SU22.
    Hope this helps.
    Regards,
    Aroop

  • Material Master Views Authorization

    Hi All,
    I'm trying to restrict some views of the material master for some users. I've read that is possible to limit these views by the maintenance status of the authorizations but itit doesn't work for me. can you help me?
    I am using "SAP_ISR_MATERIAL_DISPLAY" role in order to restrict all the views except Warehouse Managment. So, I put the maintenance status of the WM view to display and nothing else with the others. Is it wrong?
    Is there any other way to do what I want?
    Thank you very much for your help.

    Hi All,
    I have made a copy of the role SAP_ISR_MATERIAL_DISPLAY and I have changed some setting in order to hide some views of the Material Master for the user. It has worked finally but doing this the user doesn't have authorization for other Transactions Code of WM like LS24, LT*, etc... So, I guess, I have to merge some roles and/or authorizations or I have to create an own role to pack everything I want for this user. Anyway, this is another issue...
    Thank you very much for your help, your answers have been very useful.
    Best Regards,
                                                                   David

  • Material master views as per user

    Hi,
    I have a requirement, insted of user authorization conept, we wanrt that the user can view only the assign views of material master to that view
    e.g  if user is ABC, this user whenever display or chnage matetial master he can only view the screen of basic data nad purchasing,  and if user XYZ login with MM02 or MM03  he can only view the Basic data, work scheduling and accounting view not the remaning can we control this with customizing,  also   How we can  find alll the authorization obejct releated to material master screen,  or related to one transaction.
    regards,
    zafar

    >
    zkarnalkar wrote:
    > Hi,
    >  I have a requirement, insted of user authorization conept, we wanrt that the user can view only the assign views of material master to that view
    >
    > e.g  if user is ABC, this user whenever display or chnage matetial master he can only view the screen of basic data nad purchasing,  and if user XYZ login with MM02 or MM03  he can only view the Basic data, work scheduling and accounting view not the remaning can we control this with customizing,  also   How we can  find alll the authorization obejct releated to material master screen,  or related to one transaction.
    >
    > regards,
    >  zafar
    To know the authorization objects of material master screen, check the following link on my blog
    http://aroopsnotepad.wordpress.com/2010/09/09/material-master-authorization/
    To find all authorization objects for a transaction, you can try SU22.
    Hope this helps.
    Regards,
    Aroop

  • Field in Material Master views

    Hi SAP Experts,
    I have the following issues.
    1. How can the field "Material grouping" in Work Scheduling View can be made also available in General Plant data / storage 1?
    2. In OMSR, there are fields MARC_MAEX, MARC_MKAL,, MARC_NOTE. These field are not assigned to any field selection groups. How can I make them to be available for use? I know how to assign them to FSG. But I could n't find them in Material Master? where these fields are placed in MM?
    Need your quick inputs.
    Thanks
    MK

    Hi,
    Those fields were not available in SAP. For reference purpose you can use those fields, but you will not expect the functionality which u r getting in your legacy system. normally e will not be using all the material master fields. You can use any one of the non used field for this purpose.
    regards,
    V. Suresh

Maybe you are looking for

  • What to do with apr

    There exists an out of date package in extra called apr.  It was originally there because we were using the old version of apache (1.3) but now apache 2.0 includes apr. I understand that development continues on apr seperate from apache and that they

  • Apple video tutorials at the Genius Bar

    Somewhere on the Apple web site they recently had four short quicktime tutorials with a guy at the genius bar explaining how to use the dictionary in Pages, who to set the colors in Keynote and several other topics. I cannot find them!! I have search

  • Exporting clip to quicktime

    I am building a poerpoint presentation and i want to export clips to each slide. How do I save individual clips as their own to export the one clip and not the whole movie at the same time. I split the video into the individual clips but dont know wh

  • PowerBook continuously reboots after running Software Update

    This morning I ran Software Update on my Powerbook. There were about 5-6 items including the latest Mac OS X update, Java, iTunes and a couple other things. The update scripts ran without incident. However, when it tries to restart, it keeps rebootin

  • Change title, tooltip and icon for About button in published Webhelp?

    About Webhelp  is just plain wrong.  The tooltip ought to read "About <project name>" and the title bar for the About window should be eliminated (or else have it read About <project ver xx>. How do I do this? Likewise, is it possible to change the I