Material Replication filtering problem
Dear Experts,
we are working on SRM 5.0 Server 5.5 and we are facing following problem during material replication and delta download replication. After making all steps related customizing objects alignment between R/3 and SRM, we putted the filter using transaction R3AC1:
- Table = MARA
- Field = PSTAT
- OP = CP
- Low = E
- Inclusive indicator
Then we Synchronized the filter and checked on R/3 table CRMFILTAB: the filter entry was existing even if disappeared after running on SRM MATERIAL Initial Download (strange!)
Our expectation was to get all materials from back-end having purchasing views and linked to material groups replicated. Unfortunately the number of materials replicated are less !!!!!
Also we tried to make delta download and the above filter is not taken into consideration during delta download: all products modified on the back-end are replicated, also those materials without purchasing view!!!!!
What is wrong???? What should we do for making this filter working???
Thanks
#Bill J.
Vangala,
That's great!!! I tried to implement manually and worked very well,
Thanks a lot.You got 10 points.
#Bill J.
Similar Messages
-
Problem on Material Replication from R/3 to EBP
Hi friends,
I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
Thanx in advance.
RajHi Ahmed,
Could you please elaborate. I am getting runtime error as 'Message_Type_X' (The current application triggered as termination with a short dump).
Thanks
Raj -
Problem in Material replications
Hi friends,
I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
Thanx in advance.
SAIRAM.ALLUHi,
If u define your condition type is manual and if you do any changes in quantity of order in change mode then manual condition will not be determined automatically. Again u have to enter it manually and then save it in change mode itself..
Regards
sankar -
Vendor and Material Replication from ECC6 Ehp7 to SRM7.0
Hi Experts,
I am facing an issue with replicating Material and Vendor Master from ECC to SRM system.
ECC system - ECC6.0 Ehp 7 & SRM system - SRM7.0
Middleware setting is done as per Note 720819 and performed the object like DNL_CUST_BASIS3 , DNL_CUST_PROD0, DNL_CUST_PROD1 and found Sucess in SRM R3AM1.
Errors :
1. Material Replication Error in SMW01
Mat. for Initial Download: Table not supported by function
Alternative units of measure are inconsistent; correct the values COM_PRODUCT_UNIT COMM_PR_UNIT
Alternative units of measure are inconsistent; correct the values
Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
2. Vendor Replication Error in BBPGETVD
Backend systems with Release 740 are not supported
Message no. BBP_BUPA002
What are all the compatabilty issues will be faced connecting SAP ECC6 Ehp7 with SRM7.0? Can any one list down.
Please Suggest the valuable comments to resolve the problem as earliest.
Thanks & Regards,
Ramprakash NDear Ramprakash,
Please check below URL for #1.
Alternative units of measure are inconsistent; correct the values in SMW01
Please find the following note which might help you for issue #2.
1313972
1349825
1372175
Thanks
Shuvrajyoti -
Material replication with LSMW and R3AC1
Hi experts.
I'm using SRM 5.0 trying import the materiais from backend R3.
I'm doing material replication using LSMW with batch-input of R3AC1, however after I mapping R3AC1 the transaction behaves diference way. Using other screens weren't mapping.
Anybody Knows how I can change de Batch-input mapping ? Or other way to make this replication?
Thanks.
Paulo Afonso Cordeiro.any special reason for using LSMW?
there is readymade CRM middleware available in SRM which acts as interface to get the cust objects(matl grps) & business objects(matl /service masters)
but you need to make some table settings & site settings for this
filtering can be done for matl/service in R3AC1
BR
Dinesh -
Material replication from ECC to SRM
Dear SRM 7.0 Experts,
We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
Regds,
CbHave you checked the outbound queue in backend R/3 system ?
Have you defined the additional user in CRMCONSUM table apart from the CRM user?
Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
described in SAP Note 430980. See also SAP Note 720819.
Hope this helps you.
Regards
Abhijeet -
Material Replication still running
Hello,
I checked SMQ1 and SMQ2 in SRM and in my backend and those table are empty.
I set a filter and launch my material replication, but it still running for long long time. it is not normal and i don't know why...can you help me?Hi
Which SRM and R/3 versions are you using ?
<b>Please go through these links, which deal with the same scenario -></b>
Material not downloaded from R/3
Material Replication from R/3 to SRM - Object status stuck in Running mode
DNL_CUST_BASIS3 still running
Re: Inbound Queue not visible in SMQ2, after starting Material replication
SRM Middleware Replication - Initial Download Failure
materail gruops replication
Problems using R3AR4
Downloading material from R/3
set filter in R3AC1 for material master
Replication product and service masters
Re: Deleting some replicated materials from SRM
Replication problem in 5.0
Hope this will help.
Regards
- Atul -
Material replication done without my material
Hai Gurus
I created material No;21,22,23 in backend system.And carried required procedure for replicating all material.But material replication has done without my materials i.e..,21,22,23 etc
Could u guys help me on this
Thanks & Regards
chandrasekharHello,
Please check the config from this blog.
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
New materials created in ECC for a already replicated product category in SRM... transfer happens by BDoc, you can view the queues in SMQ1 & SMQ2.
Check that there are no filters setup in R3AC1
In SMW01, you can check the list of BDoc, for material replication BDoc type is PRODUCT_MAT, click on show BDoc message, you will see list of materials replicated via BDoc & errors if any.
Material Replication R/3 to SRM 3.0 - material not in COMMPR01
Hope this helps.
Thanks
Ashutosh -
Material replication life cyle
Hi Experts
I am new to the CRM MIDDLE WARE could you please tell me how gets replicated from ecc to crm like what is function modules for the mapping and extraction of materials from ecc and which function module is involved in moving it into the crm total life cycle of the material replication.
Thanks&Regards
HariHello Hari,
When you trigger the initial load of object MATERIAL in CRM txn:R3AS, then middleware will make an RFc call to
the extractor which is CRS_MATERIAL_EXTRACT in this case, which is responsible for extracting the material data.Then
FM CRM_FILTER_DOWNLOAD_DATA
would be called to consider the filters set on child segments like MVKE,MLAN etc,filters are set in txn:R3AC1.
After this CRS_SEND_TO_SERVER,followed by the user exit would be called to send the BAPI structures to CRM.
In CRM, BAPI structures would be converted to MBdoc by mapper module which is COM_MAP_BAPIMTCS_TO_PROD_MAT.
After whcih validation module COM_PRODUCT_MAT_VALIDATE would be called to validate the data.
After the validation, MW modules will be called (CL_SMW_MFLOW~PROCESS_OUTBOUND) to trigger the MBDoc formation.
Get back to me if you have any further clarifications.
Hope this helps!
Best Regards,
Shanthala Kudva. -
Overwriting Conditions data during Material Replication from R/3 to SRM.
Hi,
When creating a new info record and then running the material replication program everything looks OK. However, if for the same material you create a new info record or change the existing info record and then run the material replication, some of the previous data is removed.
We implemented BADI(PRODUCT_CUSTOMER2) to read info records from R/3. When i debug BADI all the info record and condition info is populated. Once the control leaves the BADI standard SAP code is not inserting/updating delta condition records. It is only populating latest info record.
SRM 4.0
Support pack level : 11
BADI Name: PRODUCT_CUSTOMER2
Method Name: MAP_R3_TO_CRM_MATERIAL
Conditions Populated in structure : COMT_PROD_SERVICE_BDOC- CONDITIONS-CND_BBP_WORKING_SET.
Thanks in Advance,
Vineela.Hi
<u><b>Please go through this -></b></u>
<u>Note 715213 Interface change in BAdIs in Release SRM 4.0
Note 689135 Conditions are not downloaded when product is updated in R/3</u>
Note 534899 - Inconsistencies in the Content Workbench
Note 420343 - TIP: Backend price transfer in product conditions
Note 459640 - Category error when transferring backend prices with report
Note 415839 - Removing errors in external product interface
<b>For pricing condition type, go to the SAP Help links</b>
http://help.sap.com/saphelp_srm30/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/content.htm
and also
http://help.sap.com/saphelp_srm30/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/content.htm
<u>Do you use IPC for pricing? I am not sure whether you can use R/3 4.6C with SRM5.5. Check your systems. Refer SAP notes 539720 if you are using simplified pricing (Classic scenario).</u>
<b>Also check for SAP OSS Notes - 394975 and 420343</b>
<u>Update of price in srm is possible through the SAP OSS Note 420343. This note describes an option to transfer a price from the Backend via a report and a BADI and to store this price in the condition table of the corresponding product in the EBP. But you have to do small changes,i think this note will certainly helps you to transfer material master prices to srm product master automatically.</u>
<b>Update Price in SRM 5.5 Automatically using report - EBP_GET_BACKEND_PRICES</b>
Re: Update Price in SRM 5.5 Automatically using report EBP_GET_BACKEND_PRICES
<b>Condition Type SRM - ECC</b>
Re: Condition Type SRM - ECC
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
Hope this will help.
Regards
- Atul -
Why we need crm middleware for material replication?
Hi Experts,
Why we need CRM middleware for material replication from ECC to SRM when we can do the vendor replication from ECC to SRM with ABAP report? IS there any technical limitation?
Thanks and regards,
RanjanHello,
Vendors and locations, for example, you can replicate from ECC to SRM using ABAP reports.
However, if you want to replicate the following information, you should use the middleware:
- DNL-CUST-BASIS3 - Basis CRM online
- DNL-CUST-PROD0 - Material number conversions
- DNL-CUST-PROD1 - Product : categories
- DNL_CUST_SRVMAS - Customizing: Service Master
- MATERIAL - R/3 Material Master
- SERVICE_MASTER - R/3 Service Master
Check note 872533. It provides more information.
Regards,
Ricardo -
Why do we need to define RFC destination and user for material replication
Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
RanjanHello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo -
SRM 7.0 - CRM middleware settigns for material replication
Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa -
Why SAP SRM material replication happens through CRM middleware?
Can some one help me to understand, Why SAP SRM material replication happens through CRM middleware? Is there any functional/Technical reason behind this design?
Dear Sridhar,
SRM releases later SRM 4.0 are working with the same middleware implementation,
there where no changes between the releases. The SRM middleware implementation
was decoupled from the CRM middleware development at that time.
(Middleware is based on the basis functionality of queued Remote Function Calls qRFC)
Regards
Laszlo -
SMOEAC site settings for material replication
SRM Gurus,
While doing the settings for material replication, in SMOEAC transaction
I am trying to create site 'SRM' of type CRM, In the site attributes if I enter RFC destination 'SRMCLNT001' and click on get values I am getting the following message "RFC destination SRMCLNT001 does not exist. No valid backend system".
Can someone please suggest what I need to check/configure to fix this issue?
Info:
R/3 side : RFC destination SRMCLNT001 (for connecting to SRM 5.0 system) created and remote logon tested OK.
Completed all CRM* table settings
SRM side: RFC destination R3CLNT800 (for connecting to ECC 6.0) created and remote logon tested OK
Thanks,
ArunMake sure you have created the RFC destination in SRM also. You need to create the following:
RFC destination of SRM in SRM and in R/3.
RFC destination of R/3 in R/3 and SRM.
Regards, IA
Maybe you are looking for
-
How to migrate from BE6000 to Communications Manager
Dear forum members, first of all, I'am tired. I have been on a long journey from the day we bought our Cisco Unified Communication system until now. Technically everything worked just fine, right from the beginning until now. But starting from the fi
-
How can I improve performance over a Branch Office IPsec vpn tunnel between and SA540 and an SA520
Hello, I just deployed one Cisco SA540 and three SA520s. The SA540 is at the Main Site. The three SA520s are the the spoke sites. Main Site: Downstream Speed: 32 Mbps Upstream Speed: 9.4 Mbps Spoke Site#1: Downstream Speed: 3.6 Mbps Upstream Speed: 7
-
Firefox only can't play videos from Hamster web site
Firefox plays videos from every other site but Hamster. IE and Chrome have no problems playing videos from this site
-
Example Code for Routine at Data Target in Info Package.
Hi, Can any one send the example code for writing the routines at Data Target of Info Package for Deleting the Request from Info Cube after Update. Thanks in Advance, Regards, srinivas
-
Accessing multidimensional Array using JSTL
Hi there, first of all: I'm a newbie to JSP/JSTL :-) I'm calling a Java-bean from my JSP. In this bean, a 2-dimensional array is created which holds four values per entry. I can access this array from my JSP w/ following code: <jsp:useBean id="feedba