Material Staging/Availability Date not possible to change

Hello,
If I create a sales order with a configurable material and I got subitems related to the main material, into the "Procurement" tab I cannot modify manually the field Material Staging/Availability Date (VBEP-MBDAT) for the subitems.
I only can change the date related to main item.
Do you have any suggestions why I cannot change those dates?
Thanks
M.

Hello,
I checked it and it is not set ("Do not form delivery groups") ... and it should be ok, isn't it?
if I add manually the same sub item with the same item category, than I can modify the Material Staging/Availability Date ... but this is not what we want do.

Similar Messages

VA01 change Delivery and Material Staging/Availability Date when vacation

Hi Gurus,
When I create a new order in VA01 for a day my company is on a period of vacation, I would like to change automatically the Material Staging/Availability Date and Delivery date to the last working day before vacations to avoid late deliveries.
I am trying to find the custo point where to do it, but I don't find it. Do you have any suggestions?
Thank you in advance.

Thanks Andy,
We maintain the factory calendar, so the problem is how the system is calculating this availability date.
For example, if we have a week of vacation and we get an order for Wednesday, the system calculates the first day after this vacation week as the day we can deliver the product. In our example would be on next Monday.
What we would like to do is that the system calculates as a delivery date the last working day before the vacation week, in our example would be on the previous Friday. So then we can avoid those late deliveries we are having now.
I don't know how or where to customize that.
I accept any suggestions.

If not possible to change, can i keep my email for firefox sync if that email account is closing down by its provider?

i have just figured out after searching, that it is not possible to change my email for my firefox sync.
it is already a nightmare for me that nokia email provider just simply closes down my account which i use for EVERYTHING in my life...
i have somany account to change the email in it, but firefox sync doesn't allow me to do that.
i really don't want to lose any details of my mozilla settings, so will it be possible to keep it with a non-existing email?
or is there a way to open a new account with a new email and merge my settings to it?

Doesn't sound like you are using Firefox Sync for its intended purpose. Plus, it sounds like you ''might'' be leaving your Sync data "all over the place" - using Sync on computers owned by strangers.
Sync doesn't just "use" your Firefox data in real-time from the Sync server, it '''''downloads''''' your data to each device that you connect to your Sync account. That data remains on each device until it is removed manually. And if you didn't "unlink / disconnect" that computer when you were done using it, Sync will stay connected to your Sync account until the "owner" of that device gets tired of seeing "his data" get changed as your data changes. Plus, unless you manually remove your Sync username and password data from the Password Manager, that other person might be able to re-connect to your Sync account at will.
Of course, the risks you are taking by doing that depend upon which types of data you fed to Sync in the beginning. Hopefully at least not Passwords.''
IMO, you would be better off carrying a USB stick around with a copy of Firefox Portable to use on Windows computers that you don't own or don't have exclusive control over. Sync will work between "Portable" and regular Firefox, even when they're both being used on the same device, at the same time.
That will "fix" two things - it will give you a 2nd "device" ''[even when plugged into your own computer]'' and it will allow you to use your own Firefox installation on on another persons computer without "sharing" your Sync data with that other person, where such is allowed by "permissions set on that device''. Nothing that you do will appear on any device that the USB stick is plugged into, at least as far as Firefox is concerned. That applies to any "loaner" computer that you might use, too.
http://portableapps.com/apps/internet/firefox_portable
As far as setting up a new Sync account goes, your data is in Firefox ''[even when it is in Sync, too]'' - so just "disconnect" from your current account, and then set up a new new account. At the end of the setup procedure the Sync service will automatically "Sync" your data to the new account, and you'll be "good to go".
I highly encourage you to do the Firefox Portable on USB stick as I mentioned above, because it sounds like the way that you have been using Sync sounds very risky with your data. Once your data gets Sync'd to another persons computer its "meshes" with their data and is all but impossible to remove completely - unless the person set up a Logon User Account specifically for you and then deleted that LUA after you were done.'' Doubtful, because from what I have seen the "average" PC owner has no concept of what a Logon User Account is all about.
In conclusion, ''tell me that you weren't sync'ing your Password data''.

Action not possible because change version exist

Dear All,
We are at SRM5.0- Extended Classic scenario and facing issues for changing some of the PO documents.
When the buyers are trying to change the PO, error is getting populated as 'Action not possible because change version exist'. This error is not allowing us to change the PO.
These POs are changed in the past and all the relevant changes are reflected to backend system with no issues. In other words Change Versions do exists for these POs. Flags for Change Version completion is also set and all historical versions can be seen but without change history.
Additional information -
1. No approval workflows are implemented for PO.
2. No locks are active for these documents.
Appreciate your help!
Regards,
Sagar

Hi Sagar and thanks for your response,
well, actually the active change version won't be preserved in any case. It would be overwritten in the first scenario, and deleted in the second one. The reason why I'd like to have this "brute force" method is to face an eventual human error. Suppose that a disalignment between R3 and SRM has been created; my report basically "alligns" the SRM version to the corresponding R3 one. And suppose also that the user made a mistake so that the program must be used a second time. I'd like to provide a way to "UNDO" the first execution of the program, that is to say: i'd like to provide a way to OVERWRITE the actual active, change version, or alternatively delete the change version that the report did create the first time it has been launched.
Hope it's a bit clearer now
Thanks for any hint/suggestion you can give me
EDIT: Oh, and please... can you provide me further information about your solution? I mean, use of that FM to unlock an active version of the PO and then the proper call to BBP_PD_PO_UPDATE specifying how you managed input params. Thanks a lot
Edited by: Matteo Montalto on Apr 9, 2009 11:43 AM

Material ledger mixed invoices not possible

Hey Masters !
I'm a vendor and I have been getting the below error's message every time that I try to submit/upload an invoice via the customer's supplier portal :
" material ledger mixed invoices not possible "
Actually , for every purchased item in a PO/Service Order there a SES # (Service Entry Sheet) is generated .So, would anyone kindly advise ?! .
Respects,
Fares

Hello,
I have got solution.
While performing MIRO, I had taken items in PO belonging to 2 different plant. For one plant material ledger was activated, and for another plant it was not activated. I have posted 2 different invoices to solve this.
Thanks
Ram

Updating license data not possible [Maintenance Package]

Hi,
I want to activate Automatic Maintenance Certificate Renewal via solution manager system as per SNOTE: 1280660.
SOL MAN: ST400 SP 18
SCM : ST-PI 2008_1_700 SP 01
when i run Maintenance package in my managed (satellite) system i got the log as below.
Updating license data not possible [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data completed from destination [Maintenance Package]
Maintenance Package completed
when i run Maintenance package in my Solution Manager system i got the log as below.
Refresh sessions from destination SM_KSMCLNT000_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT000_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT000_BACK ( KSM , 0020472195 )
Refresh sessions from destination SM_KSMCLNT000_BACK finished [Maintenance Package]
Refresh sessions from destination SM_KSMCLNT001_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT001_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT001_BACK ( KSM , 0020472195 )
Please anyone facing the same or related issue, give me a suggestion..
Thanks,
Manikandan B

Hello Manikandan
The error indicates that there is an issue with the *_back RFC destination
itself.
Have you done an authorisation check within SM59?
Utilities > Authorisation check?
You can also do so by testing the connection in SDCCN.
Goto > Taskspecific settings > RFC destination > Backdestination
This problem is often caused by the user in the RFC connection
being locked in the Solution Manager.
Make sure the RFC user account is a communication user so the password does not expire. Sometimes the password expires and the RFC user locks the account as the old expired password is provided too many times.
The message also indicated "No active master Solution Manager destination maintained"
Please make sure the relevent Solution Manager system has been marked as Master in SDCCN Goto > Taskspecific settings > RFC destination >
These are things you will want to check.
I hope this information helps you resolve this problem.
Regards,
Paul

Changes in Retroactive account time date not possible error

Hi
This employee is joined on date 20.01.1969 after that this employee prejoin on 09/04/2009 and we are trying to change the join date by using transaction code PA41. i am getting the below error message.
'Change in earliest retroactive accounting date time not possible!.'.
I checked the table (T569R) and i changed the value in Time evaluation fields like 01.01.1900 through table level after that I am not getting error message I am able to create the employee but I want to do the configuration level for that
Please provide me the step by step procedures do to the configuration.
before changes in table T569R
01 01 01.01.1990 Incentive wages
01 02 01.01.1990 Time evaluation
01 03 01.01.1990 Time statement
01 04 01.01.1990 Pair formation
after changes in table T569R
01 01 01.01.1990 Incentive wages
01 02 01.01.1900 Time evaluation
01 03 01.01.1990 Time statement
01 04 01.01.1990 Pair formation
Please help me to resolve the above issue.

This error comes due to 2 dates set in the system
1> Employee level restriction - PU03
2> Payroll Level restriction - PA03
Since you are not going too retro (4/9/2009) so most likely it would be employee level.
Check his IT0003 and edit the dates using tcode PU03 or PA30 -> Utilities -> Change payroll status.
Also when you are trying to change the infotype, make sure you give the correct date as start date (04/09/2009)
Regards,
SC.

Change description general ledger master data not possible for some languag

Hi all,
We have a lot of language translation on tab Key word/translation for all G/L accounts. English is our log in language. When we want to change the description in Finnish, Norwegian and Danish this is not possible (this lines are grey, only display mode). We can´t remove these lines and we can´t change them. It is possible for all other languages except this languages and English. Does anyone have a clue why this is not possible?
Thanks in advance!
BR L

Hi Lisa,
I was asking if you can maintain a new description (for an account number where no description in one of the mentioned languages is entered) so the message "Description already exists in language XX" should not appear in that case...
In general, account descriptions are stored (for chart of accounts / language key) in table SKAT thus you can check the entries already available.
Did you contact the user-authorization responsible which authorization objects are assigned? FS00 contains authorization objects for account auth. group (F_SKA1-BES), company code (F_SKA1_BUK) and the whole chart of accounts (F_SKA1_KTP), maybe some change authorization (activity 02) is missing?
Best regards, Christian
Edited by: Christian Ortner on Nov 22, 2010 1:06 PM

Open Items exist.. Not possible to change parameters ??

Hi all,
I made some X account balance to zero. And now when I was trying to change the account as open item (prior not in open item mgmt), system says that 'Account balance is 0, but still open items exist. Change not possible'. What does that mean ?
Suresh

Hi,
Once transaction data is posted, GL Account cannot be made into an open item managed account. However, you can consider the following options:
1. GL Account Balance is ZERO: If the GL Account balance is ZERO, the GL Master record can be changed to Open Item managed Account or vice versa. But this will not change the transaction data already posted. Only future transaction data will be open item managed.
2. Until SAP version 4.0B SAP has provided a program to convert a GL Account to open item managed account after transaction data is posted (or vice versa). You can execute this program by blocking the GL Account and this will make the required changes in tables and also change GL Master record.
But this program is not available for execution in higher versions. Hence, you can copy the program into a Z Program and execute it. The name of the standard program is RFSEPA02.
Thanks
Murali.

Import of material groups into hierarchy not possible (note 432339)

Dear All,
I am trying to replicate material groups (DNL_CUST_PROD1) from R3 system. Prior to this our SRM system configured as standalone and Material Hierarchy is already defined. When I am trying to replicate the material groups in SMQ2 I am receiving status as "sysfail" and further I am getting above message. In the message the OSS note also mentioned. In the OSS note they have given following solution
Error message "Import of material groups into hierarchy &1 not possible":
In transaction COMM_PRAPPLCAT, you specify that the hierarchy specified in the error message is to be used for application 'Purchasing' (02). This means that the material groups would be created in this hierarchy. Delete this setting in Transaction COMM_PRAPPLCAT. If hierarchy R3MATCLASS already exists, assign
hierarchy R3MATCLASS to application 'Purchasing'. Then the material groups are created in hierarchy R3MATCLASS. If you want to import the material groups into the hierarchy specified in the error message, you can also keep this hierarchy
assigned to application 'Purchasing' and deactivate the error message. Error message "Import of material types into hierarchy &1 not possible". You can do this in Customizing under 'Customer Relationship Management -> Master data -> Basic settings -> Define system message characteristics'.
My problem is I am not able to find out the path given in the OSS note ( i.e, Customer Relationship Management u2013 Master data) . Any one can help me in this regard ?
with regards
Ram

Hi ram
one upon a time supplier relation ship management and customer relation ship management comes under EBP node i.e ebp 3.5 versions.
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
plz visit Marchin blog to.o
since u r aleady in standalone but now you may try push material group from ecc to srm .
so you need to do set up all crm middleware settings in ecc and srm.
br
muthu

Availability data not visible in data warehouse

I'm having a problem with our data warehouse. I can't run or even find availability reports from some of the objects that are visible and clearly monitored in our scom. For example I did a web transaction monitor with the wizard but when I try to run a availability
report from it, there is no object for that so I can not even run the report. I know the 500 object limit and I have set the registry key to see more objects. We use SCOM 2012 R2 UR2.
Is there anything that I should check? Can I somehow run a SQL query against my data warehouse to see if there is any availability data?

Hello SamiKoskivaara,
Could you please check if event ID 31553 is being logged on one of your SCOM management servers ?
Event ID 31553:
"Data was written to the Data Warehouse staging area but processing failed on one of the subsequent operations. Exception 'SqlException': Sql execution failed. Error 2627, Level
14, State 1, Procedure ManagedEntityChange, Line 368, Message: Violation of UNIQUE KEY constraint 'UN_ManagedEntityProperty_ManagedEntityRowIdFromDAteTime'. Cannot insert duplicate key in object 'dbo.ManagedEntityProperty'. The duplicate key value is (184,
Mar 1 2013 9:42AM). One or more workflows were affected by this...

Is it really not possible to change outgoing name in Gmail when I am using Microsoft Exchange?

I am using Microsoft Exchange for the PUSH notification because Gmail Account only fetches data. I want to use PUSH because I want to receive real time email messages. I also want to add my middle name in the outgoing name.
Is this not possible?

Thank you so much!!!
I didin't realize to go to the Account Settings of my Google Account, but what I tried before was to go to the Accounts and Import Settings of Gmail and it didn't helped.
Anyway, thank you so much!!!

Nonstock material PO value should not allow to change once it picked fromPR

Hi There,
when create PO for non stock material it will pick price from PR to PO once it pick the value again it should not allow to change.
so what ever value is there in PR same should be in PO also even if we try to change PO value system should not allow
so please advise me

Dear
If you want to copy the price from PR to PO do the following settings
Here we have to do:
First create a parameter in
SPRO>Materials Management>Purchasing>Authorization Management>Define Function
Authorizations for Buyers
set the following fields:
Order price adoption, Ref. to PReq, Change source, Change
OTy./it. cat. and with Field sel. equals to AKTH. After created
this parameter we have to set the users profile (using SU01 Transaction) with Parameter
EFB (Function Authorization: Purchase Order).
After doing all the settings what i mentioned, when you create the requisition that time before saving you have to select the price adoption as net or gross than only it will copy to the po because default is do not copy
so go Valuation tab in the requisition and in PO price field select as nte price or Gross price than save the reqs
now if oyu create the PO you will see the price
Regards

Cannot purchase records/"processing of credit card data not possible"

Since last Tuesday I cannot buy records at iTunes store (Austria). Whenever I click the "purchase" button the systems sends back the message that "currently the processing of credit card data is not possible".
That's interesting as I have been handling my purchases since months using a Click and Buy account without any problems.
The ITS support team did not yet answer to my request.
Any ideas how to fix? Thx!
Windows XP Pro

The security code is the 3 or 4 digit code outside of the actual card number (and NOT the same as your PIN). It is usually located on the front of AMEX cards and on the back of Visa and MC. You typically wouldn't need that for purchases in a physical store. Log into your AppleID, modify the payment method and set it with the proper code.

Sales order qty not possible to change.

hi experts
i have created a sales order with suppersession material for 2 qty and we deliver only 1 qty to customer.
now i want change the sales order qty 1 so that status gets completed.
but in VA02 material qty is in hidden mode cant possible to make changes. this is happening with suppersession material only.
need your support
thank you

hi dear
thanks for the reply again
schedule line is also in grey mode. cant possible to make changes.
let me add on this
when we create order suppersession material entered with item cat. TAPA which generate automated second line item cat TAN. when we make delivery TAN gets copied in the DO and Billing afterthat.
but issue is once delivery created. in VA02 order oty field (KWMENG) become in grey mode. cant possible make any changes ?
i have checked both the item categories completion rule which is (not relevent for completion)

Material Staging/Availability Date not possible to change

Similar Messages

Maybe you are looking for