Material Type during Material Creation

Hi all:
For creating Raw Material or Finished Product from MMR1 and MMF1, there is no need to select material type, . I have created Material Type for e.g Gold, Silver, Color Stone, even i have to create Gold, Silver and Color Stone material without selecting material type.
Could anyone help me with this.
Regards.
Shegar.

Hi,
I guess defaulting is not possible. Copy the existing material and create a new one so that the inspection type is also copied.
Check the link
http://forums.sdn.sap.com/thread.jspa?messageID=9803039#9803039
Regards
Ayyallas
Edited by: ayyallas on Feb 22, 2012 12:51 PM

Similar Messages

Restrict WBS Element Type During Element Creation

I have our Finance dept who is wanting to create a role that will restrict the users to creating ONLY a Statistical WBS Element, and no other type of WBS element. I have looked through the auth objects associated with CJ30, CJ20N, CJ01 and CJ11, but do not see any auth objects that restrict the type of WBS element that can be created.
Does anyone have an idea if this can even be done? Is this intended functionality?

>
Michael Towan wrote:
> I have our Finance dept who is wanting to create a role that will restrict the users to creating ONLY a Statistical WBS Element, and no other type of WBS element. I have looked through the auth objects associated with CJ30, CJ20N, CJ01 and CJ11, but do not see any auth objects that restrict the type of WBS element that can be created.
>
> Does anyone have an idea if this can even be done? Is this intended functionality?
i had a look-around CJ30 (not the other ones). i'm not familiar with this module but obviously the 'philosophy' behind WBS elements does not cover their 'type'. i don't think you can do this without using an enhancement. i had to run from work today to keep up for another appointment so i was not able to search for an enhancement that might do the trick. maybe you can do that with an abaper on your site?

Reg.default condition types during PO creation

Dear Experts
When I create PO some condition types such as P000,JEXC and FRB1 only does come automatically.Where it is configured ?. And I have to be selected other condition types when creating PO. There is no problem. What is my quesition is, where to I have to configure to come automatically.
Pls advise.
Thanks
Rajakumar.k

Hi,
Enter M/08 t-code.
Select your pricing procedure and click on detail button.
The conditions that are marked as manual will come only if they are entered manually.
Other condirions will come automatically.
IF manual condition is checked
Conditions, that are given this indicator in the pricing procedure, are only included in determination (price determination, outputdetermination, batch determination) if they are entered manually.
Check P000, JEXC will not have manual condition check in ur pricing procedure.
Regards,
Raja

Storage bin Type Change during TO creation

Hi friends
Is it possible to change Storage Bin type (Not Storage bin no)during Transfer Order (TO) creation in LT06 / LT04 ? If so please let em know the procedure to bring storage bin type during TO creation.
Please confirm
Rgds
Madhavan

Hi,
Please check and try to define Storage Bin Type (SPRO->LE->master data->storage bins), then activate Storage Bin type search strategy in OMM1.as appropriate. (in my past experience system given priority to Storage type search and then to Storage BIn type search during picking- I am not sure whether this is the SAP logic or priority).
Once you define and assing the Storage bin type to Bins this will be available during creation of TO.
Hope this helps.
Thx
MJ

Throw error during PO creation if a material is not extended to storage loc

Hi,
Users require for SAP to throw an error during PO creation if a material is not extended to the storage location that is entered on the PO.
Presently it neither gives warning or error message.
Please advise.
Regards,
Pratap

SAP does not validate that, if you want it, then you have to do such check in a user exit.
SAP can be customized to create the material master storage location segment itself when posting the goods receipt, so it is not necessary to check this in the PO.
Further this design speeds up the process, you can already order before others have finished the material master maintenance.

Error in pipeline material creation

hi,
we want to create one pipeline material as per our new requirement for showing gas consumption.during material creation with mat type PIPE, it's showing an error:The field Profit Center is defined as a required field; it does not contain
an entry.
Procedure
If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization.
thanx,
sheetal

Hi
In your client if Profit center accounting(PCA) is activated ,then you need to maintain the Profit center for the material.
Option 1: goto OMS2, got details of pipleine material & select the Costing View of the material.
Now goto MM01 in creation of pipeline material & maintain the profit center in Cotsing 1 View.
Deactivating the field from mandatory to optional will not serve your purpose as PCA will get affected.
Thanks & Regards
Kishore

Key performance indicators (KPI) for material creation

Dear all,
I need to define some Key Performance Indicators (KPI’s) to measure the data quality during the material creation (MM01) process. The objective is to get concrete statistics about data quality/accuracy for fields related to material from all views created with MM01 (basic data, classification, unit of measure...).
I would like to get your expertise on how to measure these KPI’s : which transactions, table (...) to use ?
I have already few ideas :
-Table CDHDR
-Transaction MM04
-Create “checkpoints“ into the workflow for material creation (ZWF01)
Do you have any other idea in mind?
I am open for all advices: transaction, table, process, approach…
Thanks in advance for your help !

I have a few ideas, but the accuracy of the master data is based on your system config.
Some things that are helpful in most of the cases:
- If material type is HAWA (trading goods) your procurement indicator should always be External procurement (check those for other material types if you have it uniformed). You can also check purchasing group based on material type if you have it distinct by material type.
- Check if sales views are opened in all org.levels
- Check if storage loc.views are opened for all SLoc
All in all, you need to have a link of two or more data in material master to be able to check it in some way automatically, otherwise you won't be able to determine if the data is correct or not.
E.g. How would you every know if lot size of 120.000 PCS is OK or not for a specific material or if you need to assign a specific purchasing group to your material.
You know the logic behind your material master data best so you can create the best rules to check for your KPI.
Regards.

Decide to send an IDOC in Material creation

Hello SAP Gurus,
I would like to know, whether, Does we have any functionality in SAP like
We have requirement as whilecreating a material in SAP, Program should check whether IDOC should trigger or not based on Material condition.
For Ex: If material type is A then IDOC should send else not . Where to define this checks and how to triggered IDOC as we r not using Output Type.
Could you plz help me in this.
Thanks in Advance for your help
We have requirement as whilecreating a material in SAP, Program should check whether IDOC should trigger or not based on Material condition.
For Ex: If material type is A then IDOC should send else not . Where to define this checks and how to triggered IDOC as we r not using Output Type.

Hi Bhushan,
You can trigger an IDOC based on the condition you have mentioned in a user exit or a BADI implementation during MM01 creation.
Check the following reference on the BADI's and User Exits which could be used in MM01.
MM01-Badi
If you need more info, please do let me know,
Sojan

EDI FOR MATERIAL CREATION AND CHANGE

Hello all,
I have a requirement that when a material is created it whole detial about that material is saved at a given location as idoc.
ie EDI configration.
How know to configure EDI process order. How can we do for material creation.

Since we are not using any message control, we don't need to setup the process code in WE41.
The function module has already been assigned to the message type in WE57.
Step1: Create a logical system - BD54.
Step2: Create a distribution model - BD64.
                 Create a model view and add the Sender (SAP ECC) and Receiver (Logical System you created).
                 Then add the message type MATMAS.
Step3: Create a RFC Destination - SM59
Step4: Create a port and assign it to the RFC Destination created above. - WE21.
Step5: Create Partner profiles - WE20
                   Partner type - LS
                  Message type - MATMAS
                  Basic type - MATMAS05
Step6: Trigger the material material through BD10.
Hope it helps.

Are there any standard web dynpro ABAP or JAVA for material creation(mm41)?

Hi SDN,
I have got the requirement to provide Web Dynpro application for material creation (transaction code is MM41) and I would prefer to enhance standard Web Dynpro more than develop from scratch. Now I got only the Web dynpro ABAP component for create sales order called "LO_OIF_MAIN_COMP" and GUI HTML for purchasing order that come with business package Eh4.
Anyone who know please kindly help me.

>but I afraid that I'm not able to find out what is its component name from application
You could just lookup the WD Application in SE80 and then it will show you the component name. From SE80 choose Edit Object from the toolbar. Go to the Web Objects tab in the dialog. Type in the WD Application name and hit enter. You will then see the details of that application.

Can we mandatory Quality Management Field at time of Material Creation

Hi Gurus,
I need to Control Material Creation for every item, if we create materials in some case our user forget for tick the Quality Management .
Is it any T-code or any customisation for control the same.
thanks in advance.
Ajit

Hi Ajit,
In MM01..After entering industry sector and material type,,,when you click on enter...A window for Views will popup...
Now You select your all views including your quality view...Now you check the check box for "view selection only on request"...Now you click on default values....
Now when ever user will create material automatically Quality view will be selected.....and it wont show the views popup again..
Cheers!!!
Utsav

Error on Material Creation.. XK01

Hi Gurus... Am new to SAP Logistics & MM
When i create Material master (XK01).. I get the following Error msg..
E:0:001 Material shud start with zsan
Pls help to solve this Error

Dear All,
For Material creation there are 2 option one is internal & exteranl No. range defined hope you syste mis comfigured with "ZSAN"
External No. Range for Creation of Material So use the "ZSAN0001" for Creation of material.
Else
You can define the Material Master Number Range in transaction MMNR.
Click the button Groups to Maintain the Material Type Grouping.
Below are those material type that have no number range groups.
To assign a group, in the not assigned group, select the Material Type you want to group.
Then tick the Group you want to assign and click the menu path Edit -> Assign Element Group.
From the same screen, if you want a new number range intervals, click Group -> Insert Group.
If you decided to used an external number range, goto transaction OMS2 and
tick the field External no. assignment w/o check.
pherasath

Problem with restriction of material creation

I have a problem regarding this code logic mention below
itz for checking the plant and profit center should be same . restrict by a message at the time of material creation .
now when we create a Alfanumeric plant and the profit center and we enter the same this message is stil comming and itz restrict the material creation .
can anybody please help me out for change the logic of this code .
break-point.
3       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
4         EXPORTING
5           input         = MARC-PRCTR
6        IMPORTING
7          OUTPUT        = MARC-PRCTR
8                 .
9     *break-point.
10       if sy-tcode eq 'MM01' or sy-tcode eq 'MM02'.
11       if RMMG1-WERKS <> MARC-PRCTR and MARC-PRCTR is not initial.
12       message id 'ZS' type 'S' number 057.
13       endif.
14       endif.
15       IF ( sy-dynnr(1) = '4' OR sy-dynnr = '0060' )             "note 754457
16          AND NOT c_set IS INITIAL AND
17           ( x_win NE sy-srows OR y_win NE sy-scols )
18           and ok-code is initial and c_classification IS INITIAL.
19         bildflag = x.
20       ENDIF.

Hi,
Aren't you missing an = in the following line...
11 if RMMG1-WERKS MARC-PRCTR and MARC-PRCTR is not initial.
Shouldn't it read as follows?
11 if RMMG1-WERKS = MARC-PRCTR and MARC-PRCTR is not initial.
Regards, Andy

Material creation process in SRM-MDM

Dear All,
I am new to SRM. Please correct me about material creation procedure in SRM if I am wrong:
Normally in classic/extended classic scenario, material first created in MM and then it replicated to SRM. Base on configuration setting for number range, system either create the product ID same as material number number in SRM when it replicated into SRM. In final steps, the product information will upload into MDM either XI integration or manually via excel upload.
My question:
+ Is it possible to automatic create product without XI via T.Code - MDMGX in MDM.
+ If the replicated product ID of SRM is different then MM material number, which number we should consider for creating product
MDM.
Thanks in advance.
BR
Jennifer

Hi Jennifer,
Answer1) You can only replicate Product Groups, Currencies and Unit of Measures through t-code MDMGX. XI/PI is required for Contract and Product Catalogs.
Answer 2) If the replicated product ID of SRM is different then MM material number, you should enter MM material number and in External Web Service Configuration for that internal catalog, uncheck "Do not check Product" indicator so that SRM will not check the Product ID and when item goes to backend system, it will have correct MM material number.
Thanks,
Anshuk Saxena

Material Creation Using BDCs.

Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problem

hai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal

Material Creation Date and Time

Hi,
Is there any place which stores the material creation date and time. We have checked table MARA, but that only has the creation date of the material, but does not give the material creation time. We have checked table CDHDR, but that only seems to have the material change date and time.
From where can we retrieve the material creation date and time.
Thanks and Regards,
John

Actually, CDHDR and CDPOS will have the value. The CDHDR record will be marked as a 'U" record but look at the corresponding CDPOS record for MARA and it will be marked as an 'I' record.

Material Type during Material Creation

Similar Messages

Maybe you are looking for