Matrix Report - REP-1813:Object object name too large to fit in matrix cell

I had this problem when running a matrix report. The report details are as follow :
Query : select department,work,salary from sal;
matrix row field : department
matrix column field : work
matrix cell field : salary
data inserted into table sal :
department : 10
work : clerk
salary : 1000
I had created the same record for 60 times. Meaning there are 60 records(with same data) in the table. When I run the report, I got the error. But, if I deleted some records, it worked fine.
In fact, I had already changed the 'Vertical Elasticity' property for all repeating frames to 'Variable'.
Could somebody please help me to solve this. It is urgent. Thanks in advance.

Hi,
Your problem is bacause the innermost fame which is printing salary per row&column is printed 60 times. (because the job & dep are same for all 60 records). You get this error when the inner most frame grows to next page. Try this with setting the max no.of records per page to some 38 or 30 depending on page size. You will get it without error.
Regards,
Chandra

Similar Messages

REP-1813 Object 'R_G_Document_Number1' too large to fit in matrix cell.

Dear Concerns,
I am facing this problem in my Cash Book Report which is Matrix. Reports runs perfectly but on page 16 its shows the REP-1813 error and on one of our supplier it shows this but in query when i do this
and pv.VENDOR_NAME !=('M/s S. B. Electronics Engineering & Control Pvt. Limited')
then report runs fine
Waiting for your quick response
Regards,
K.J.J.C

Dear Concern,
The problem solved by our team members the problem is in the Frame basically the R_G_Document_Number1' is the frame in matrix report we set its General Layout and in General Layout (*Vertically Elasticity*) set to Fixed and
(*Horizantal Elasticity*) set to Variable and the main frame also set to Variable.
Regards,
K.J.J.C.

Rep-1813:object r_supp_name too large to fix in matrix cell.

hi all,
im getting an issue while running orale report.
i used layout model as matrix.
im getting error as:
rep-1813:object r_supp_name too large to fix in matrix cell.
r_supp_name is repeating frame of supplier_name field.
i had already set maximum number of records but still my issue not solved.
im unable to rectify it anyone please help me.
thanks,

Dear,
I am facing the same problem my question is that you resolve your issue about REP-1813 or still pending if solved kindly share with us.
Regards,
K.J.J.C

REP-1219:' Object name ' has no size -- length or width is zero.

my report has @28 columns in one repeating frame so the horizontal width is long..
on running the report i am getting following error..
REP-1219'<Object name>' has no size -- length or width is zero.
Can somebody help??
Anu

no need to delete any frame or any thing else
just read my post in the following thread
Re: Apps Error
hth

File communication channel issue : object name too long

Hi Experts,
My requirement is to place the successful files in folder and un-successful files in one folder after processing.
we used parameterized mapping to achieve this requirement.
I'm facing below issues, please help me to resolve.
" An error occurred while connecting to the FTP server. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Unexpected reply codeSpecified object name too long, limit is 10 characters: $Filepath_Su.'. For details, contact your FTP server vendor.
As per my understanding it is not taking the path specified,because of length issue.
Please send me your valuable inputs and help me.
Thanks in advance for your help.
Regards
Bhargava Krishna

Hello,
By loking ur error description, it's quite evident that it's a FTP sever issue?
Sometime on FTP server, there is a check which is enabled to limit the length of file names, and i think the same has been recently implemented on ur FTP server. So instead of changing ur config, check with ur FTP admin.
Tested the same after tweaking existing FTP server settings.
Thanks
Amit Srivastava

Report by Application Object Name

have zen7sp1ir1
i want to generate a report, by application object name, if it is
distributed to the workstation. ( sucssess failed etc )
is it possible to do so? how ?
helge

Helge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ORA-00064: object is too large to allocate on this O/S (1,16777216)

Hi
My database 10.2.0.3 in AIX 6.1.7
RAM 256G
sga_max_size=150 G
when i m assigning sga_target more than 100 gb then instance creation raise error
ORA-00064: object is too large to allocate on this O/S (1,16777216)
Do i need any tuning to my AIX OS ? or tuning in Oracle. please guide me
Regards
Rabi

$ oerr ora 64
00064, 00000, "object is too large to allocate on this O/S (%s,%s)"
// *Cause: An initialization parameter was set to a value that required
// allocating more contiguous space than can be allocated on this
// operating system.
// *Action: Reduce the value of the initialization parameter.
Are you using 64K pages? Also see http://public.dhe.ibm.com/partnerworld/pub/whitepaper/162b6.pdf

ORA-00064: object is too large to allocate on this O/S (1,4086000)

Hi
When i do DB start up i ma facing th efollowing issue
ORA-00064: object is too large to allocate on this O/S (1,4086000) DB is not starting Up. How do is reslove this ? is there any quick idea?
Vijay

What is the max PGA & SGA i can set it to this instance?Use v$pga_target_advice views for pga size and V$sga_target_advice views for sga size .
--neeraj

ALTER SYSTEM SET processes=1000 generates ORA-00064: object is too large to

Hi All
I'm using Oracle Release 10.2.0.1.0.
When performing:
=============
ALTER SYSTEM SET processes=10000 SCOPE=SPFILE;
We can't start the 10g DB: ORA-00064: object is too large to allocate on this O/S (1,5282400)
When reducing the size to 150 there is no problem starting the db. I can not start it. ORA-00064: object is too large to allocate on this O/S (1,5282400)
I refered to ORA-00064: object is too large to allocate on this O/S :::Plz Help Me
But I can not resolve this problem.
Please help me.
thiensu

Not sure, because i haven't got ORA-00064 yet.
ORA-00064: object is too large to allocate on this O/S num, num
Cause: The initialization parameter DB_BLOCK_SIZE is set to a value that calls for more contiguous space than can be allocated on the operating system being used.
Action: Reduce the value of DB_BLOCK_SIZE so that the requested contiguous space is within the capacity of the operating system.
http://www.pitt.edu/~hoffman/oradoc/server.804/a58312/newch2a1.htm
Regards
Girish Sharma

Error Message "Some content on the PDF is too large to fit on a single page.

I get the below error when I try to download a response as a .pdf:
Some content on the PDF is too large to fit on a single page.
Please go to the "Design Tab" and adjust the contents, the font-size, or divide the flagged items into multiple elements.
Any ideas?

Go to the Design Tab and make sure you switch to the Page View (look the bottom right corner of the screen)
Once you see the Page View (used to see what the PDF will look like for your response) scroll down and you might see which object is being trucated (it will be covered by a red rectangle). This often happen if you have a element that is too big to fit on one page (like a single or multi choice field).
You will need to adjust your element so that nothing is trucated.
Gen

[SOLVED] xrandr: HDMI output too small or too large to fit screen

I'm trying to connect my PC to the TV with an HDMI cable. But I'm having trouble with xrandr.
xrandr lists 1920x1080 as the largest mode for HDMI and 1280x1024 as number two. So I tried both of these:
xrandr --output LVDS1 --off --output HDMI2 --mode 1920x1080
xrandr --output LVDS1 --off --output HDMI2 --mode 1280x1024
But the first is about 1-2cm too large to fit the screen (both at the top and on the sides) and the second one is too small. Is there anything I can do about it?
PS: Also 1920x1080 output is very sluggish and there is video tear when I move windows around. The PC is a ThinkPad X220.
Last edited by Lars Stokholm (2012-02-23 17:11:36)

Thanks. I set my TV picture format to "unscaled".
The output is still sluggish. I would have thought an i5-2540M would be able to handle this in a more responsive manner.

Since the latest version of itunes, my playlists are "too large" to fit on the computer screen. I can no longer scroll down because the far right side of the screen is too far over. How can I minimize the screen or be able to scroll down my list? Thx!

Since the latest version of itunes, my playlists are too large to fit on the screen. The left side, with all my playlists is still there, but I can no longer scroll down the chosen playlist as the far right is no longer accessible. Any suggestions on how to minimize the list? Thanks.

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

Cost element report with cost object name column

Hi,
i'm looking for a report similar to S_ALR_87013601: Cost Elements: Breakdown by Object Type, but including a column with the cost object name. Does anyone know if such a report exists? If it doesn't exist, how can i create a report like this?
Some of my company costs are assigned to cost centers and some of them are assigned to wbs elements. We would like a report where we could have all the information together.
Thank you very much

Hi Xavi ,
Some of my company costs are assigned to cost centers and some of them are assigned to wbs elements. We would like a report where we could have all the information together.=>
There is not standard report available.. which will display total cost per company code.. i,e cost booked on cost centers, internal order and WBS elements ... This is becuse each modules store data in seperate tables.
You have to create a ABAP report to serve your pourpose. You have to collate all the costs booked in a company code for cost centers, IO and WBS elements . Pick up real costs only as per company code..
We are using such custom report and its working fine.
Regards
Sarada

Report error, Invalid object name 'v_lu_cpu'

Hi
I have a report that I have imported from another SCCM server that has it working. I have changed the datasources after the import but when I try to run the report I get this error message:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet0'. (rsErrorExecutingCommand)
Invalid object name 'v_lu_cpu'.
Does anybody know what this means?

Ok, then I understand.
I'm not that good at reporting so if anybody can help out with replacing the code that uses v_lu_cpu with
something else, it would be very kind. Thank you
SELECT DISTINCT
v_r_system.netbios_name0 AS "Computer Name",
v_r_system.Description0 AS "Description",
v_gs_system_console_usage.topconsoleuser0 AS "Top Console User",
v_GS_PC_BIOS.serialnumber0 AS "PC Bios Serial Number",
v_gs_computer_system.manufacturer0 AS "Computer Manufacturer",
v_gs_computer_system.model0 AS "Computer Model",
CASE
WHEN v_gs_computer_system.manufacturer0 LIKE 'Dell%'
THEN 'http://support.dell.com/support/topics/global.aspx/support/my_systems_info/details?servicetag=' + v_gs_system_enclosure.serialnumber0
WHEN v_gs_computer_system.manufacturer0 LIKE 'Hewlett%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
WHEN v_gs_computer_system.manufacturer0 LIKE 'HP%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
ELSE '(Not available)'
END AS "Warranty Information"
FROM v_gs_processor
INNER JOIN v_r_system
ON v_gs_processor.resourceid = v_r_system.resourceid
INNER JOIN v_gs_system_enclosure
ON v_gs_system_enclosure.resourceid = v_r_system.resourceid
INNER JOIN v_GS_PC_BIOS
ON v_GS_PC_BIOS.resourceid = v_r_system.resourceid
INNER JOIN v_gs_computer_system
ON (v_gs_computer_system.resourceid = v_r_system.resourceid)
LEFT JOIN v_gs_system_console_usage
ON v_gs_system_console_usage.resourceid = v_r_system.resourceid
LEFT JOIN v_lu_cpu
ON Lower(v_lu_cpu.cpuhash) = Lower(v_gs_processor.cpuhash0)
WHERE v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 <> 12
AND
v_gs_computer_system.manufacturer0 NOT LIKE 'VMware%'
AND
v_gs_computer_system.model0 NOT LIKE 'Virtual Machine'
AND
v_R_System.Operating_System_Name_and0 LIKE 'Microsoft Windows NT Workstation%'

Financial Reports 9.3.1 - Query is too large and cannot be executed

Hi,
I'm trying to pull a Financial report from one of my ASO cube, version 9.3.1 and received the following error.
"Query is too large and cannot be executed. The product of member counts across all dimensions in the query exceeds 2^64..."
The report is pulling from a combination of 6 different cross dimensions and drill down to the bottom level 0. I have read a couple of blogs with trying to change the buffer and sort buffer size from 10 KB to like 1000 KB within the database settings as well as the Pending cache size limit setting from like 32 MB to 64 MB on the Application setting. I've tried all combinations but nothing seems to work.
However, I was able to retrieve the same combinations through Essbase Excel Add-in by addding the MAXFORMULACACHESIZE in the Essbase config setting. But this didn't work for the Financial Reports. I know that in version 11.1.2 has that MDX Query enable through reports which may help with the query. Unfortunately, that MDX Query enable is not available within version 9.3.1.
Please help.
Thanks

John,
The Database has data that is rolled up to all levels.
I can open the report to Edit in the Financial Reporting Studio. This allows me to click on members in the grid, however, when I search for members I am unable to do so. I can drill down to the member and select it, but when I run the report in FR studio, I get the same error message 'Error: Invalid Report Object'.
Thanks and Regards
Kunal Tripathi

Matrix Report - REP-1813:Object object name too large to fit in matrix cell

Similar Messages

Maybe you are looking for