Maverick worked great, then suddenly SLOW after installed WebRoot virus software

When I first upgraded to Mavericks my system was super fast!
Then I downloaded a trial version of WebRoot security software & then full version.  Then started to have the screen freeze (sometimes seemed to be associated with the mouse cursor and sometimes not?), had to force quit.  AND, then the system started up SLOW.  So I uninstalled Webroot. 
But system still slow in start up phase PLUS now in the middle of the monitor there's a break in the image all the way across the screen which then disappears after about 30seconds or so.
What can I do to fix the start up speed and what is up with the screen break (never had that in any of my prior Macs).  Thanks, Charlotte

Do waht leroydouglas suggested.  Anti virus software is not needed on Macs.  They do more harm than good at the present time.
Also avoid malware like Mackeeper, CleanMyMac and similare cleaning apps.
OT

Similar Messages

  • My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • System slow after install Mavericks

    I have an older Mac that became slow after installing Mavericks.  I read a couple of discussions on here and found out about etre check.  I downloaded it and ran it, and I am hoping one of the experts on here will be able to help me.  Here are the results:
    Hardware Information:
              iMac (24-inch, Early 2009)
              iMac - model: iMac9,1
              1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400 - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              HP IO - Path: /Library/StartupItems/HP IO
              HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
              Oplmgr - Path: /Library/StartupItems/Oplmgr
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:5:4
    Disk Information:
              WDC WD6400AAKS-40H2B0 disk0 : (640.14 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 589 GB (114.52 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
                        BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 50.27 GB (34.91 GB free)
              OPTIARC DVD RW AD-5670S 
    USB Information:
              Apple Inc. Built-in iSight
              Seagate FA GoFlex Desk 3 TB
                        disk1s1 (disk1s1) <not mounted>: 209.7 MB
                        FreeAgent GoFlex Drive (disk1s2) /Volumes/FreeAgent GoFlex Drive: 3 TB (1.09 TB free)
              Apple Inc. Keyboard Hub
                        Logitech USB Trackball
                        Apple Inc. Apple Keyboard
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.Logitech.Control          Center.HID
              com.logmein.driver.LogMeInSoundDriver          (1.0.2)
              com.Cycling74.driver.Soundflower          (1.5.2)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [not loaded] com.logmein.logmeinblanker.plist
              [loaded] com.logmein.logmeinserver.plist
              [loaded] com.logmein.raupdate.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.splashtop.streamer-daemon.plist
              [not loaded] com.teamviewer.teamviewer_service.plist
    Launch Agents:
              [loaded] com.Logitech.Control Center.Daemon.plist
              [failed] com.logmein.LMILaunchAgentFixer.plist
              [loaded] com.logmein.logmeingui.plist
              [loaded] com.logmein.logmeinguiagent.plist
              [not loaded] com.logmein.logmeinguiagentatlogin.plist
              [not loaded] com.splashtop.streamer-for-root.plist
              [loaded] com.splashtop.streamer-for-user.plist
              [not loaded] com.teamviewer.teamviewer.plist
              [not loaded] com.teamviewer.teamviewer_desktop.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist
              [loaded] com.akamai.client.plist
              [loaded] com.akamai.single-user-client.plist
              [failed] [email protected]
              [loaded] com.google.Chrome.framework.plist
              [failed] com.google.GoogleContactSyncAgent.plist
              [loaded] com.google.keystone.agent.plist
    User Login Items:
              Palm Desktop Background
              Transport Monitor
              iTunesHelper
              SplashtopRemote
              Volume_1
              Music Manager
              HPEventHandler
              HP Scheduler
    3rd Party Preference Panes:
              Akamai NetSession Preferences
              Citrix online plug-in
              Flash Player
              Flip4Mac WMV
              Logitech Control Center
              MusicManager
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              CitrixICAClientPlugIn.plugin
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              GarminGpsControl.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              LogMeIn.plugin
              LogMeInSafari32.plugin
              LogMeInSafari64.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              Move-Media-Player.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 589 GB Disk used: 474.48 GB
              Destinations:
                        FreeAgent GoFlex Drive [Local] (Last used)
                        Total size: 3 TB
                        Total number of backups: 116
                        Oldest backup: 2011-08-10 07:34:13 +0000
                        Last backup: 2013-11-15 06:32:36 +0000
                        Size of backup disk: Excellent
                                  Backup size 3 TB > (Disk size 589 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  21%          backupd
                   7%          kextd
                   3%          mds
                   2%          WindowServer
                   2%          Finder
                   1%          coreservicesd
                   1%          mds_stores
                   1%          EtreCheck
                   1%          MusicManagerHelper
                   0%          firmwaresyncd
    Top Processes by Memory:
              119 MB             com.apple.IconServicesAgent
              115 MB             mds_stores
              45 MB              Finder
              45 MB              Dock
              41 MB              ocspd
              41 MB              mds
              29 MB              MusicManagerHelper
              29 MB              WindowServer
              29 MB              CalendarAgent
              29 MB              Splashtop Streamer
    Virtual Memory Statistics:
              1.91 GB            Free RAM
              1.01 GB            Active RAM
              353 MB             Inactive RAM
              504 MB             Wired RAM
              253 MB             Page-ins
              0 B                Page-outs
    Even if they are not a big problem, can anyone tell me how to get rid of the Palm and HP startup items.  They are from old devices that I do not have anymore, and I would like to eradicate them from my system.

    Startup items are in /Library/StartupItems/
    You can delete them if you are an admin user. However it doesn't remove the actual software. The safest way to do that is to either use the manufacturers uninstaller or try to find uninstall steps listed on a forum or support site.
    I'm inclear on 'Oplmgr' check that is up to date if you can, since it is using the old way to load a startup job.
    Palm desktop is probably version dependant (check what you have)…
    http://kb.hpwebos.com/wps/portal/kb/common/article/5916_en.html
    https://discussions.apple.com/thread/505278?start=0&tstart=0
    Soundflower looks out of date? Grab the installer (with an uninstaller IIRC) and update or remove it.
    LogMe In, TeamViewer & Splashtop are running jobs in the system level too, so I'd spend time checking they are up to date or removed if they are not needed.
    The Launch Daemons and Launch Agents are 'system level, with your own user version too  - User Launch Agents.
    I would clean out the failed background job…
              [failed] [email protected]
    It will be stored at…
    ~/Library/LaunchAgents/[email protected]
    Use the Finders 'Go Menu > Go to Folder…' to open the hidden ~/Library & look in the LaunchAgents folder for the .plist & delete it.
    Reboot for the Startup items to be unloaded.

  • My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

    My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
    Thanks in adavnce for help.

    Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

  • My macbook pro is very slow after instal OSX

    My macbook pro is very slow after instal OSX

    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    Try these in order:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

  • Mini Ipad got slow after installing iOS7

    Hi there,
    my Mini Ipad got really slow after installing iOS7. The same apps are working much slower. What can i do? Im even considering going back o iOS6, if its even possible.
    I have already tried:
    Restarting the device
    Changing iCloud Sync configurations
    I haven´t try:
    Reseting all configurations, cause i don´t want to lose any infos and I don´t know exactly what im going to lose.
    Any suggestions? Thank you!

    NachinRob wrote:
    Im even considering going back o iOS6,
    This is not possible. Apple does not support downgrading.
    NachinRob wrote
    my Mini Ipad got really slow after installing iOS7.
    Have a look here...
    http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • Private Photos App - pictures not displaying This app was working fine, then suddenly it won`t display any of the photos.

    This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo"  I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • Slow after installing yosemite

    My Mac is slow after installing OS X Yosemite. Can anyone advise me as to anything I can do to speed up performance. I understand that I may need more HD and or Ram space but is there anything else I can do. Any apps that can guide me as to what is obsolete and using HD unnecessarily and what to delete or remove. I have just run EtreCheck and results are as follows. I ran the test with iMovie, iTunes, iPhoto and Safari running or opening as I run these programs simultaneously most days. From what I can see or understand from the report, Ram and HD space are of major concern to my problem. Does anyone see anything else I should address. Examples of slow performance are applications taking up to a minute or longer to open or close. Switching from one application to another or switching from one desktop to another.
    I am currently using an external drive for backups and file vault is turned off. All my movie files are on the external drives. The only files on my actual Mac HD are
    music, photo, applications, system and document files etc.
    Thanks in advance for any help
    RichoParker
    EtreCheck version: 2.1.8 (121)
    Report generated 21 March 2015 9:18:58 am AEDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (20-inch, Early 2009) (Verified)
        iMac - model: iMac9,1
        1 2.66 GHz Intel Core 2 Duo CPU: 2-core
        2 GB RAM Upgradeable
            BANK 0/DIMM0
                1 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                1 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 9400 - VRAM: 256 MB
            iMac 1680 x 1050
    System Software: ℹ️
        OS X 10.10.2 (14C1510) - Time since boot: 1:47:42
    Disk Information: ℹ️
        WDC WD3200AAJS-40H3A0 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 319.21 GB (74.39 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5670S
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Inc. Keyboard Hub
            Mitsumi Electric Apple Optical USB Mouse
            Apple Inc. Apple Keyboard
        Seagate Backup+ Desk 4 TB
            Seagate Backup Plus Drive (disk1s1) /Volumes/Seagate Backup Plus Drive : 4.00 TB (3.23 TB free)
        Canon MP610 series
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Firewire Information: ℹ️
        WD My Book 800mbit - 800mbit max
            disk2s1 (disk2s1) <not mounted> : 32 KB
            My Book (disk2s3) /Volumes/My Book : 1.00 TB (432.30 GB free)
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) [Click for support]
        [not loaded]    com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
        [not loaded]    com.wdc.driver.1394HP (1.0.9) [Click for support]
        [not loaded]    com.wdc.driver.USBHP (1.0.11) [Click for support]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) [Click for support]
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) [Click for support]
        [not loaded]    com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) [Click for support]
    Startup Items: ℹ️
        HW_CreateNetwork: Path: /Library/StartupItems/HW_CreateNetwork
        HWPortDetect_driver: Path: /Library/StartupItems/HWPortDetect_driver
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.AirPlayUIAgent.plist
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.coreservices.uiagent.plist
        [killed]    com.apple.EscrowSecurityAlert.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.pbs.plist
        [killed]    com.apple.pluginkit.pkd.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        [killed]    com.apple.spindump_agent.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        15 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.cache_delete.plist
        [killed]    com.apple.coresymbolicationd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.diagnosticd.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.iconservices.iconservicesd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.MobileFileIntegrity.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.sandboxd.plist
        [killed]    com.apple.softwareupdated.plist
        [killed]    com.apple.spindump.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    com.apple.xpc.smd.plist
        [running]    com.seagate.TBDecorator.plist [Click for support]
        17 processes killed due to memory pressure
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
    User Launch Agents: ℹ️
        [failed]    [email protected] [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        MyDriveConnect    Application  (/Applications/MyDriveConnect.app)
        iTunesHelper    UNKNOWN Hidden (missing value)
        WDDriveManagerStatusMenu    Application Hidden (/Incompatible Software/WDDriveManagerStatusMenu.app)
        WDMemeoAgent    Application  (/Library/Application Support/Memeo/WD Anywhere Backup/Agents/WDMemeoAgent.app)
        WDQuickView    Application  (/Incompatible Software/WDQuickView.app)
    Internet Plug-ins: ℹ️
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        Default Browser: Version: 600 - SDK 10.10
        Silverlight: Version: 5.1.30214.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        GoPro  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 319.21 GB Disk used: 244.82 GB
        Destinations:
            My Book [Local]
            Total size: 0 B
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Too small
                Backup size 0 B < (Disk used 244.82 GB X 3)
    Top Processes by CPU: ℹ️
             3%    WindowServer
             1%    iPhoto
             0%    AppleSpell
             0%    fontd
             0%    MyDriveConnect
    Top Processes by Memory: ℹ️
        97 MB    iPhoto
        77 MB    iMovie
        28 MB    cloudd
        24 MB    Safari
        24 MB    WindowServer
    Virtual Memory Information: ℹ️
        55 MB    Free RAM
        460 MB    Active RAM
        421 MB    Inactive RAM
        403 MB    Wired RAM
        4.60 GB    Page-ins
        376 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 21, 2015, 07:27:12 AM    Self test - passed
        Mar 21, 2015, 09:03:46 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/CalendarAgent_2015-03-21-09034 6_[redacted].crash
        Mar 19, 2015, 08:14:41 AM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-19-081441_[ redacted].cpu_resource.diag [Click for details]

    The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB and noticed an improvement.
    Crucial
    Other World Computing

  • My homepage button is not working for my iphone 4 after installing ios 5

    my homepage button is not working for my iphone 4 after installing ios 5 has anyone got any suggestions please

    Hope it works.
    When i was in iOS 4 nothing happen quite like this.
    BTW, does it do anything with iCloud thing?
    Thank you.

  • My macbook pro is very slow after installing mountain lion

    my macbook pro is very slow after installing mountain lion?  Is anyone else having this issue?

    If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
    one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
    If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
    the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
    You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
    There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
    You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
    Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
    Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD

  • App store is very slow after installing io6 on my iphone 4S

    email and app store are very slow after installing ios 6 on my iphone 4S

    Perhaps these suggestions will help:
    http://www.apple.com/batteries/iphone.html
    also
    http://theweek.com/article/index/250098/ios-7-battery-life-6-simple-ways-to-keep -your-iphone-powered-up
    http://www.tuaw.com/2013/09/18/how-to-stop-ios-7-from-destroying-your-iphones-ba ttery-life/
    One final unconfirmed possibility:
    http://ipadnerds.com/fix-battery-drain-issue-ios-7/
    Regards.

  • My wifi is very slow after installing mountain lion on my Mac book pro

    My wifi is very very slow after installing mountain lion on my MacBook pro.
    What can I do?

    Ha  ha, I misread that as "My wife is very slow after installing mountain lion on my Mac book pro"
    BTW on my MBPro (late 2009 with max RAM) Mountain Lion runs very well with no slowing down.

  • My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

    My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
    I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Maybe you are looking for