Mavericks install and Time Machine

Hi all,
Running 10.6.8 Snow Leopard and going to install Mavericks. Current system and backups are good. Running Time Machine and also FileVault is enabled.
Want to know what I need to do (or not to do) so Time Machine can continue backing up right where it left off on Snow Leopard when I install Mavericks.
Is that possible or do I need to start a whole new TM backup with Mavericks?
Any help/thoughts on this or related to it are very welcome!
Thanks

Hi Alain,
I see you never got a reply to this, but I'm wondering what you finally did? I have very similar questions, but I'm "upgrading" from 10.6.8 Snow Leopard. I also have FileVault activated and use a Time Machine backup. Any comments/suggestions/experience you (or others) would like to share would be helpful.
Thanks

Similar Messages

Mavericks install and Time Machine backup disk

Anyone come across this?
Trying to install Mavericks and get the message :
This disk is used for Time Machine Backups
This is my Macbook Pro Hard Drive and my time machine backups are saved to an external drive which was not connected when I was trying to install Mavericks
Currently running 10.7.5

The requirements for Mountain Lion are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
If your machine does not comply with these requirements you may be able to install Lion, for which the requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99) (you will get a code enabling you to download it from the Mac App Store).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Problems with new iMac and Maverick: ITunes and Time Machine

Just upgraded from an old to new iMac, migrated my data from my old machine and installed Maverick. Couple of major problems.
1. My iTunes library won't open. I've been into the library folders but can't work out how to get the old library to load. Decided to try a sync back from my iPhone but while the phone tells me that it has synced with my Mac, the music hasn't moved across.
2. Time Machine doesn't work. On my old machine I was using an external Omega hard drive but when I plug it into the new Mac it isn't even showing up on the desktop. Clearly there's a connection of some sort as the disc is powering from the Mac. Prior to upgrade, I was getting messages that Time Machine couldn't be updated but I put that down to my failing elderly Mac, which kept crashing, freezing and needed replacing. Perhaps the external drive was dying too.
Any suggestions welcome.
Thanks,
Mike

I dragged the installer from the install disk to my desktop and was more successful in installing problem CS2 apps. Make sure to update everything as well. Some times it takes a restart to get the finickiness out of PS.

Hard Drive Erase, Clean Install and Time Machine

I am currently running OS X 10.10.3 and I want to do a clean install. All my content is backed up with Time Machine via external drive.
First, how do I erase my hard drive and install a fresh version of OS X 10.10.3?
Second, is it better to use a USB drive for the clean install or just you the Recovery Mode?
Last, once i finally have a clean installation of OS X 10.10.3, am i able to access my external drive via time machine to bring back some of my old files...i have read that the folder in the external drive is not accessible and not accessible through time machine.
I appreciate the response and guidance!

Hello Jacob,
All of these are good questions to have when erasing and installing OS X Yosemite. To answer your first question you would need to boot to either your Recovery HD or through the Recovery USB and follow the steps in the first article below. Either option will get the task accomplished and will install OS X Yosemite. For your final question about restoring from a Time Machine back up, you will see the option to restore when going through the setup process of your Mac. Let me know if the information below is of help or need further assistance.
OS X Yosemite: Erase and reinstall OS X
https://support.apple.com/kb/PH18869
OS X: About Recovery Disk Assistant
https://support.apple.com/en-us/HT202294
OS X Yosemite: Recover your entire system
https://support.apple.com/kb/PH18848
Take it easy,
-Norm G.

Fresh Leopard Install and Time Machine

Leopard has been a miserable experience on my Imac 1.8Ghz G5. It has played havoc with the fan management and constantly overheats causing an abrupt switching off with a “pop” (presumably a safety feature). I am planning a completely fresh Leopard install on a wiped hard drive (which was not done originally). What folders or files should I NOT back up in Time Machine so that none of my previous system is restored. Basically I want everything back as it is now, Apps, e-mails, bookmarks etc. but a completely fresh system. Presumably I need to restore the Library folder, but is there anything in the System folder that I will need to restore? I have done an Archive and Install before, but that has not helped. I have reset the PRAM and SMC also. Looking at various Boards, fan problems are commonplace. I hoped that the first update would sort this out, but it didn't. A fresh install seems a reasonable next step. Any advice would be appreciated.

It's time for Apple to fess up and admit that Leopard, while great in potential, was rushed out prematurely. I've never seen so many forums dealing with OS-X failures like we see with Leopard.
It's a complete mess. I guess all those engineers shouldn't have been pulled to rush iPhone out the door prematurely too.
Not one--NOT ONE product that Apple let out this year was correct out of the gate. ****, they couldn't even get a freakin' keyboard right!!
Bad Apple, Bad.
I used to be unabashedly proud to recommend to people that they give Apple a close look before buying a computer. I'd be out of my mind to recommend Apple again until they get off this self-destructive, kamikaze trajectory. They have absolutely exceeded their capabilities for quality product development, and are no better than Microsoft.

Clean install and time machine

I'd like to reformat my hard drive and do a clean install of leopard. I've backed up my drive with time machine and I'm wondering if it is possible to recover all my third party applications etc etc including passwords and settings without having to reinstall them all from the original discs?

Hello Jacob,
All of these are good questions to have when erasing and installing OS X Yosemite. To answer your first question you would need to boot to either your Recovery HD or through the Recovery USB and follow the steps in the first article below. Either option will get the task accomplished and will install OS X Yosemite. For your final question about restoring from a Time Machine back up, you will see the option to restore when going through the setup process of your Mac. Let me know if the information below is of help or need further assistance.
OS X Yosemite: Erase and reinstall OS X
https://support.apple.com/kb/PH18869
OS X: About Recovery Disk Assistant
https://support.apple.com/en-us/HT202294
OS X Yosemite: Recover your entire system
https://support.apple.com/kb/PH18848
Take it easy,
-Norm G.

Combine fresh system install and Time Machine Backup

Hi all !
There´s a question that´s more generally Leopard and Snow Leopard related:
In trying to find causes of a system slowdown I decided to go for a complete fresh system install. BUT I also want to use my data saved in the time machine backup without spoiling the freshly created system folder.
I also want to update the system to the current OS version before restoring from BU.
Is there a way to keep the fresh system folder deriving from a fresh installation and just replace the rest of the data (that´s not present yet) with the time machine backup ?
I think the handy command "Restore System from Backup" from the OSX system installer wouldnt be a good idea. It would copy ALL the files from the backup, and would overwrite my fresh system folder, so that I´ll end up with the same old, probably faulty system.
Could the migration tool do the job ?
Thanks for your knowledge !

habschi2 wrote:
In trying to find causes of a system slowdown I decided to go for a complete fresh system install. BUT I also want to use my data saved in the time machine >backup without spoiling the freshly created system folder.
You should be able to migrate, for example, just your data using TM. But, TM is a bit unpredictable. Why not make a bootable clone of your internal on an external. It would serve fail-safe purposes, migrations purposes, and data-backup purposes. At the end of your install, you could, as groups only, migrate your data, users, settings, and apps--using your discretion. I would migrate only my data and my settings.
Is there a way to keep the fresh system folder deriving from a fresh installation and just replace the rest of the data (that´s not present yet) with >the time machine backup ?
See above.
I think the handy command "Restore System from Backup" from the OSX system installer wouldnt be a good idea. It would copy ALL the files from the backup, and would overwrite my fresh system folder, so that I´ll end up with the same >old, probably faulty system.
Absolutely correct.
Could the migration tool do the job ?
You can use Migration Assistant with TM, but I have never done so. So, I can't advise. The clone I mentioned takes care of all you issues in a very straight forward manner without dealing with the confusion of TM and MA that can arise.
(8878)

Install and time machine

When I restarted my computer last week I lost much - two user accounts, my email, my photos and pretty well everything I had added to the orginal iMac. I took it to the apple store and they used Time machine from my back up hard drive to my computer again. Tonight the same thing happened. I shut down and restarted and only the admin account appears andwhen that is opened all my files are again gone. I can't afford to go back to the techie once each week. What can I do to be able to reboot and still have the current desktop etc.each time.

It's time for Apple to fess up and admit that Leopard, while great in potential, was rushed out prematurely. I've never seen so many forums dealing with OS-X failures like we see with Leopard.
It's a complete mess. I guess all those engineers shouldn't have been pulled to rush iPhone out the door prematurely too.
Not one--NOT ONE product that Apple let out this year was correct out of the gate. ****, they couldn't even get a freakin' keyboard right!!
Bad Apple, Bad.
I used to be unabashedly proud to recommend to people that they give Apple a close look before buying a computer. I'd be out of my mind to recommend Apple again until they get off this self-destructive, kamikaze trajectory. They have absolutely exceeded their capabilities for quality product development, and are no better than Microsoft.

Cannot sync my iphone to imac after new hard drive install and time machine restore. Does not see device

Had a new hard drive installed
IMAC does not see iphone therefore cannot sync

Did you already try these suggetions?
iOS: Device not recognized in iTunes for Mac OS X

Since installing mavericks my WD time machine doesn't work, it keeps insisting it needs more space? This wasn't an issue an hour earlier?

Since installing mavericks my WD time machine doesn't work, it keeps insisting it needs more space? This wasn't an issue an hour earlier?
Id also like to know if Powerpc software will be supported? I have C&C Generals on disc but it doesnt run now mavericks is installed?!
Annoying!

Regarding time machine, it probably took a full backup after you put mavericks on. To investigate, open Console, select "All Messages" and type "backup" (without the quotes). It will then only show you backup-related messages. If you're not sure how to read those, copy them and paste them into a reply here; we can investigate the situation.
I don't know anything about your PPC software issue, sorry.

After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC:    Enabled
DIMM Riser B/DIMM 1:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser B/DIMM 2:
Size:    2 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x0000
Part Number:    0x000000463732353642363145353830304600
Serial Number:    0x00000000
DIMM Riser A/DIMM 1:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x42076007
DIMM Riser A/DIMM 2:
Size:    1 GB
Type:    DDR2 FB-DIMM
Speed:    800 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x48594D5035313241373243503844332D5335
Serial Number:    0x4207631E
DIMM Riser B/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser B/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 3:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty
DIMM Riser A/DIMM 4:
Size:    Empty
Type:    Empty
Speed:    Empty
Status:    Empty
Manufacturer:    Empty
Part Number:    Empty
Serial Number:    Empty

Maverick and Time Machine and backup

I moved to maverick. My time machine indicator at the top right of my imac does not spin when it is backing up. It used to with Lion. Is this normal.
When adding Maverick. Is it normal my external hard drives seem to view the first back up and a new one, and is taking more than an hour to back up?
thanks,

Hi John et al,
Update: Finally...
At least for the Promise Pegasus R4... but I noticed on other threads that WD drives are also acting up too so this might work with them too.
I turned off Time Machine, and deleted that pesky .plist file, again. I unplugged the R4, power and thunderbolt, then played whack the gopher with the drives swapping them around randomly. I reintalled Mavericks from a fresh download, yet again, then set Time Machine to backup on a fast USB 3TB drive (which it did in 6 hours or so). Then I turned off Time Machine, deleleted that .plist file again, rebooted the iMac, plugged in the R4, reformatted it again with Disk Utility, then hooked it to Time Machine, said a few slightly heretic prayers to whatever demons came with Maverick, and 2 minutes later Time Machine started to backup and report 1 hour to complete... the hour isn't up yet, but I'm crossing everything I have 2 of...
I've noticed a few other 'didn't copy over or mesh well' things with Maverick, but that's a different thread and 2 updates from now once we all suffer through this extended beta-test by Apple.

OSX 10.9 and Time Machine onto WD HDD

OSX 10.9 and Time Machine onto WD HDD. Time Machine won't back up onto WDD since upgrade to OSX Mavericks. I can still access previous backups.

If you installed "WD SmartWare," remove it according to the developer's instructions.

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

"No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
AirPort Utility 6.3.1 for Mac - Support - Apple
Then, power off the entire network...all devices...in any order that you want
Wait a minute, then start the modem first and let it run a full minute
Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
Keep starting devices one at a time the same way until the entire network is back up
See if AirPort Utility can "see" the Time Capsule now.
If yes, try another backup. If you encounter an error message, post back with the exact message.

Mavericks install and Time Machine

Similar Messages

Maybe you are looking for