Mavericks / PS CS6 - trouble with performance in .psd

Hi, I was big trouble when i working on psd webdesign.
Film: http://www.youtube.com/watch?v=v5SuQWQI3kg&feature=youtu.be
My computer:
i3 3.0GHz,
16 GB ram
Gigabyte GTX 660 2048MB RAM OC
SSD,
On Windows 7 , the same psd working normally... (notebook i3/8gb ram/ssd) :/

"Have you tried disabling desktop composition (Aero Glass)?  I have heard there can be conflicts there that prevent drivers from enabling full 30 bit color."
This is disabled automatically by the Quadro driver the second you turn on the Deep Color option.  And no, as someone who uses his machine for production moreso than pleasure, I immediately turn all that stuff off anyways as it's useless.
I will test that file after work tonight when I get home.  No 10bit here.  Irony. 
Thanks.  I'll also try to make a video/animated gif of sorts to illustrate the difference to your naked eye.  I was also quite clueless as to the "real world" implications when I started looking into this, as all you really find are generated gradients, which seem doctored at times.  Seeing the pop happen with your own eyes is quite interesting, and a definite selling feature.
Oh, also, I will add that I previously ordered the new U2713H from Dell, and I was 100% disssatisfied with the backlight bleed, as well as the color representation and quality control.  Mine had a very terribly noticeable yellow color bleed in the lower left.  I found this to be a regular occurance for these newer LED backlit monitors, and ultimately returned it and went with the older CCFL U3011.  It is far superior IMO and only slightly more expensive.  Highly recommended.  This forum posting swayed my ultimate decision away from the U3014: http://hardforum.com/showthread.php?t=1751499
- Justin

Similar Messages

  • Adobe audition cs6 trouble with getting the trial

    Having trouble navigating the adobe site perhaps,but I downlaoded the adobe dowload assiant and registered etc. to get a free trial of adobe AUDITION cs6  and when I got thru the download manager,I can't find it as one of the products I can try.
      Anybody have any advice as to here It is?

    After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
    Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-f aq.html#main_How_do_I_download_a_trial_version_of_Creative_Suite_or_E l ements_software_
    Alternatively you can try downloading it from the direct download links available at : http://prodesigntools.com/adobe-cs6-direct-download-links.html
    But make sure you follow the important steps mentioned on the page before initiating the download.

  • Indesign CS6, trouble with accessing menus

    Hi all,
    I've asked this question on twitter before and the staff was very helpful but it didn't solve my problem.
    I have a PC on Windows7 family premium, 64 bits.
    Intel Core i3 CPU550 3.2 GHz, processor
    4G of RAM
    As far as I can tell that should run ok according to specs.
    I had the evaluation version of InDeisgn CS6, then installed the full version after subscribing to the creative cloud. The problem was there with the trial version too. So I uninstalled it and installed the full version. Still nothing.
    Basically I can start a project and all. But most of the menus on the right hand side are acting up. (see below). I tried the method of resetting the preferences (as explained on the forums), but it's still not working.
    Here's a screencap with some of the troubles indicated:
    I can click on the tools on the left hand side, but the other side is all a mess. I can open panels, like here the colours (sorry it's a French version) but I can't click on the colours. Same with the pages panel, I can't click on pages or anything else. Etc.
    Plus some drop-down menus are acting strange. As you see above, I clicked on one arrow but it opened another drop down menu?
    I tried disconnecting my tablet as it sometimes interferes, I also tried a mouse with a cable thining it might be my wirelss mouse. But it's still the same?
    Can anyone help me please?

    Thank you Bob. You are right I was using a personalised display and that's what was messing it up!
    Sorry about posting in the wrong section. I'm in the process of testing the suite and this affected other programs, now I see why.  I'm just focusing on ID as it's what I need this week. 
    Again, many thanks, you've saved my day

  • Forms central and dreamweaver CS6 - trouble with contact form

    So I'm a noob. I created a simple one-column layout in DW CS6 and cannot seem to get this Forms Central contact form template to align correctly. I'm sure it is something simple (CSS related). Any help would be appreciated. It is inserted in the beginning of the body tag - here take a look.
    -->
    </style></head>
    <body>
    <script type="text/javascript" src="https://formscentral.acrobat.com/Clients/Current/FormsCentral/htmlClient/scripts/adobe.for m.embed.min.js"></script>
    <script type="text/javascript">;ADOBEFORMS.EmbedForm({formId:"Tdaq4TZp4ArEoczwH3UmuQ"});</script>
    <div class="container">
      <div class="header"><a href="#"><img src="" alt="Insert Logo Here" name="Insert_logo" width="180" height="90" id="Insert_logo" style="background-color: #C6D580; display:block;" /></a>
        <!-- end .header --></div>
      <div class="content">
        <h1>Instructions</h1>
        <p>Be aware that the CSS for these layouts is heavily commented. If you do most of your work in Design view, have a peek at the code to get tips on working with the CSS for the fixed layouts. You can remove these comments before you launch your site. To learn more about the techniques used in these CSS Layouts, read this article at Adobe's Developer Center - <a href="http://www.adobe.com/go/adc_css_layouts.http://www.adobe.com/go/adc_css_layouts">http://www.adobe.com/go/adc_css_layouts</a>.</p>
        <h2>Layout</h2>
        <p>Since this is a one-column layout, the .content is not floated. </p>
        <h3>Logo Replacement</h3>
        <p>An image placeholder was used in this layout in the .header where you'll likely want to place  a logo. It is recommended that you remove the placeholder and replace it with your own linked logo. </p>
        <p> Be aware that if you use the Property inspector to navigate to your logo image using the SRC field (instead of removing and replacing the placeholder), you should remove the inline background and display properties. These inline styles are only used to make the logo placeholder show up in browsers for demonstration purposes. </p>
        <p>To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)</p>
        <!-- end .content --></div>
      <div class="footer">
        <p>Footer</p>
        <!-- end .footer --></div>
      <!-- end .container --></div>
    </body>
    </html>

    Hi,
      Try to insert the embed code inside one of your <div> tags say the div-content tag after your <p>..</p> tags.
    The embed code should work inside <div> ... </div> tags according to the layout defined there.
    Thanks,
    Lucia

  • Tiff or psd trouble with fh11

    please help me, i have trouble with tiff or psd image, no
    problem when i imported that image, but when i add effect drop
    shadow or glow and other effect that object going blur, i try to
    clone that object before add shadhowing, i think it will be ok, but
    when i print the file, that object appear not correctly, arounding
    object appear blur look like mozaic, i really need advice from this
    forum, thankyou.

    > please help me, i have trouble with tiff or psd image,
    no problem when i
    > imported that image, but when i add effect drop shadow
    or glow and other effect
    > that object going blur, i try to clone that object
    before add shadhowing, i
    > think it will be ok, but when i print the file, that
    object appear not
    > correctly, arounding object appear blur look like
    mozaic, i really need advice
    > from this forum, thankyou.
    Check File > Document Settings > Raster Effects
    Settings.
    The default is 72 dpi which is good enough for screen. 300
    dpi is for print (press) but it may make screen redraw very slow.
    Note that raster effects do not work well, or at all, in
    FreeHand, especially with cmyk colors. And yes, most of the effects
    will blur the object (!?!).
    Probably the best way to create these effects is to use
    Phothosop. Also in Illustrator the raster effects do work.
    Jukka

  • Trouble with Photoshop Cs6

    Having trouble with Photoshop cs6. Brushes that i have downloaded from 3rd party websites were deleted from Photoshop after months of use. We replaced all the brushes 1 by 1 but now there is an extreme lag in almost every function in photoshop that i had never experienced before. Dont know what is going wrong.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • After upgrading to Mavericks, I am having trouble with TimeMachine backups.

    After upgrading to Mavericks, I am having trouble with TimeMachine backups. As the backups get close to completion, it suddenly increasing the amount of data being backed up. My 400GB data takes up about 700GB on the backup drive.
    Tried reformatting the backup disk and had the same result.

    After upgrading to Mavericks, I am having trouble with TimeMachine backups. As the backups get close to completion, it suddenly increasing the amount of data being backed up. My 400GB data takes up about 700GB on the backup drive.
    Tried reformatting the backup disk and had the same result.

  • Trouble with Mail and Maverick

    Trouble with Maverick and Mail - contacts (groups) will not load into address bar in mail.

    Check that the mac's preferences for icloud is still connected to the proper account.  Be sure photo stream is turned on. 
    You haven't described what "trouble" your mail account has.

  • TS3276 I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

    I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

    I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
    My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As".  So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail.  I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, and then try again."
    Here's what I know:
    The server -- Peter's iMac (8) does exist;
    The server -- Peter's iMac (8) is available at this time;
    The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
    The server IP address is correct, as specified in the system sharing preferences;
    The network connection is active when I attempt to connect.
    I'm convinced the problems stem directly from the OS X Yosemite update.  None of this was ever remotely an issue in the previous OS X's -- any of them.  This is maddening!  What can be done?  Apple?? Anyone???

  • Anyone having trouble with Splashtop and Maverick?

    Splash top will not run since installing Maverick.  I have uninstalled and reinstalled, but still no go.  Anyone else?

    I've been having trouble with this since I upgraded to iOS 7.0.2! Logged on tonight to see where I could log the problem with apple to get to fix in the next update! Seen on Facebook that others having same issue.
    I've also had a problem that when I put phone in to airplane mode it isn't reconnecting to the network afterwards!

  • How do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC

    how do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC?
    any help appreciated...thank you! V

    I don’t think you can.

  • I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this?

    As stated I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this? I need it for homework tonight.

    Crowntheme,
    you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still freeze after a few minutes?

  • I'm having trouble with calendars in mavericks

    I'm having trouble with calendars in mavericks, its sluggis and the rainbow wheel of death comes up also. somebody help please

    When you next have the problem, note the exact time: hour, minute, second.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Trouble with opening images from dreamweaver cs6(64bit) to photoshop cs6(64bit).

    Hi guys i need help! I have trouble with opening images from dreamweaver cs6(64bit) to photoshop cs6(64bit). I uninstalled and went to preferences/file types editors to set up ps6 as primary but I still get some error.After i click image in dreamweaver,I get this message-Unable to launch...Please be sure that application exists and that there is enough memory to run it..

    Can you Launch Photoshop normally from your desktop shortcuts?
    I usually keep DW and PS open at all times so I can switch back & forth.
    Nancy O.

  • Does Production Premium CS6 work with Maverick and the new iMacs

    Does Production Premium CS6 work with Maverick and the new i Macs

    Thankx for your reply. I saw the Apple tech note but that's what Apple says. I just want to know from users who experienced the thing if it really works.
    It doesn't seem so simple if you believe what this site tells (sorry it's in French):
    http://www.macquebec.com/spip.php?article4146
    So: BootCamp worse than the Beta?

Maybe you are looking for

  • IMPORT NAMETAB statement in FM DD_GET_NAMETAB

    Hi experts, I have a created a custom structure and when i execute the above FM in the export parameter X030L_WA i get 3 dates CRSTAMP ABSTAMP DYSTAMP I tried to figure out from which table, program is picking these values. i have debugged the FM and

  • Purchase requsition

    Hi experts we have n number of purchase requisitions and now we want to convert those requisitions into purchase order at a time throug pls tell me the process

  • Must connect to iTunes

    I recently reset my iPod Touch because it was getting "sluggish." I did this once before without any problems. This time after waiting for the reset, a picture appeared on the screen indicating I must connect to iTunes. I could not use the iPod until

  • Just ordered full package and regretting it alread...

    Hi All, I had a sign on for this community because i had BT sports through Sky. I cancelled Sky and ordered a full package with BT around 3 hours ago and i am regretting this decision already. One of the draws was the £150 Sainsburys vouchers, i forg

  • CoreMIDI.framework

    When I open GB 11, the folder 'coreMide.framwork pops up on the dock and tries to open at the same time. Is this a bug? Does it mean there is a bug? How can I fix it? I also tried to follow the 'fixes' for not being able to record an electric guitar