MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite.
I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists.  The LV was just installed on the PC with RT/FPGA/Sound and Vibration. I have Admin and am accessing through a PCMCIA Ethernet card. I have to disable normal wireless Ethernet just to see the cRIO unit at all.

Well, you actually won't be able to see the C-series modules for a cRIO in MAX.  Take a look at this KnowledgeBase article for a little more information.
As far as not being able to see them in the Project explorer, are you trying to run in FPGA or Scan Interface?  If you're using the FPGA Interface, you'll have to make sure to expand the FPGA Target tree in the Project explorer to see these modules.
Regards,
Austin S.
National Instruments
Academic Field Engineer

Similar Messages

  • I installed adobe reader but it will not display any pdf

    I installed adobe reader but it will not display any pdf

    What version of Reader in what OS? Does the program open? What happens when you use File->Open to open a pdf file on your computer? Any error messages?

  • When i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas?

    when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

    when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

  • Airport Utility will not display any base stations.

    I just had a new hard drive installed in my two year old MAC, since the last one crashed and have Mavericks installed. I have tried to un-install the application so I can re-intall a new one but the system will not let me. I am running a 5th generation of Airport Extreme which by forcing the back methoed of pulling the airport and continualiy doing a hard factory reset on the device, we have determained that the application Airport Utility for Mavericks is defective but there is no patch or update available; how do i get the application to show my base station so I can monitor who is conected to my internet.

    I'm not interested in ascribing blame either but waiting for Apple to fix something that isn't broken will only divert attention from seeking the problem's underlying cause. Assuming the AirPort Utility app on your Mac remains unaltered, it's exactly the same one everyone else is using. Should there be any doubt about that, reinstalling OS X will obviate any concern.
    I suggest the following for you to consider as you deem appropriate.
    Apple's Wireless Diagnostics may supply some additional helpful information.
    To use it, hold an option key while you click your Mac's Wi-Fi icon, and choose Open Wireless Diagnostics...
    The following authentication dialog will appear:
    Authenticate with your Admin password, then click the Continue button in the following:
    The network analysis and diagnostic tests will take several minutes to complete:
    When it completes, if your wireless network is functioning properly the following will result:
    If something is amiss, supposedly the results will be different and you will be presented with helpful information.
    Assuming your connection is "working as expected" select Continue to summary and click Continue:
    Ignore the pre-populated text field, which is provided as a place for you to type in additional information should Apple ask for it in the course of obtaining technical assistance from them. Apple has no way of knowing where your router is located in your home, and certainly doesn't know if you even have an upstairs bedroom closet.
    Click Continue.
    The next step will also take a few minutes:
    When it finishes, you will be presented with a summary that may or may not be useful to you. Let me know if it is.
    The WirelessDiagnostics-xxx.tar.gz file deposited on your Desktop can be dragged to the Trash, or you may wish expand it and examine its contents. It's up to you.

  • OSDResults not displaying any Installed Applications

    Hey guys, i've had a good look around and can't find any information on OSDResults.exe. I'm using it at the end of the build Windows 7 deployment at the company, the stats are all fine, time etc, its just it does not show any applications installed. I cant
    find any reference to anything anywhere on how to make this work?
    Has anyone got this to work correctly?

    Hello,
    I am having this issue too. I have a working MDT 2013 UDI TS - it just doesnt show anything on the Applications Installed tab.
    I am using Packages, as I understand Applications will not show here. 
    Has anyone gotten any further information on this tool? 

  • My wordpress home page will not display any active information in Firefox 15 on Mac OSX Lion.

    Hey All,
    I've tried many things to resolve this issue, but none of them seem to be working. For some time now I have not been able to see the homepage of wordpress.com with full information i.e. stats, notifications, etc. I'm running Firefox 15 on Mac OSX Lion with the following settings and add-ons. I've tried disabling the various privacy add-ons one-by-one to no avail. Please help!

    The only active thing I see on that page is the banner near the top which keeps changing: "For the cat pictures", "For the poet", etc. Do you not see that? I did not see any link for "Home". Try these pages:
    * http://kb.mozillazine.org/Websites_look_wrong
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Incidentally, it seems to me that you are using Mountain LIon, not Lion. Mac OS 10.8 is Mountain Lion.

  • IPad 2 - iMovie - will not display any videos or pics from my camera roll.

    iMovie won't display any vids or pics from my camera roll. All the vids are taken using the iPad. Help?

    Probably a privacy issue.
    Check your privacy settings.
    On the iPad, click SETTINGS
    then PRIVACY
    then PHOTOS
    Look for iMovie and turn it ON

  • Flash player will not display any content, IE 7

    Need help troubleshooting this issue.
    When launching a video IE 7 keeps request to install the
    latest version.
    I have installed the latest version, it appears that it is
    install ok, however no videos will play, I keep getting requested
    to install the latest version.
    I have set the permissions to "full control" suggested on
    this forum, however that did not correct the problem.
    Thanks in advance for any suggestions,
    Marnie

    I found a solution for my issue. I reset the "shockwave"
    paramter in IE 7 to enable. Some how Shockware and Flash play are
    dependent or interconnected. Once I change "Shockware" to be enable
    the video worked. I did not have to reinstall, just restart the
    browser. Some how Shockware got disabled, not sure how or when,
    this is a mystery. Anyone any thoughts or insight into this issue,
    or know how Shockware is related to Flash player?

  • 4.0b4 will not display any web pages in Mac ox 10.6.4 - now solved, see beow

    Firefox stopped displaying web pages. No address bar, status bar, nothing. The pages I try to load appear under the "windows" menu, but the "minimize" and zoom controls are grayed out.
    I downloaded and reinstalled 4.0b4, but this did not help. "internal" windows like bookmark listings or downloads show fine.

    I found the problem: poor recognition of multiple screen settings. I typically use a MacBook Pro with an auxiliary monitor so that I have two screens active. The problem occurred when I was not connected to the secondary screen. Apparently Firefox was setting the new windows up on the non-existant screen. One part of the program recognized that the windows were not visible, but that information was not properly conveyed to the function that decided where in the desktop space to place new, active windows.
    Restarting the MacBook had no impact on resolving the problem, but connecting the second monitor did.

  • Rented movie; will not display; native video app will not display any of my videos

    I rented a movie last night using the iTunes Store app on my iPad.  The movie just barely started, then froze.  Now the native video app doesn't work at all.  I can tell that it's "on" when I touch the "video" app -- the screen displays nothing, but it's dimly lit.  Help!  Has anyone else had this problem?

    Carolyn: I was able, through more research in the discussion groups, to find a solution that resolved my problem! In the HD>applications folder>safari>get info I checked the "open in 32 bit mode" box. Then I went to Adobe Reader>preferences>Internet and unchecked the box "display PDF in browser using" [Adobe Reader 9.3.3]. I then closed my Safari Browser, restarted the computer and, happy days are here again! On my older G5 I only had to set the preferences on the Adobe Preferences, as Safari 5.0.1 only appears to work in 32 bit mode, as the 32 bit mode check box was not there. You may want to pass this on to other users with the same or similar problems.

  • TS1702 My iPhone 4s will not display any pdf file in any of several apps. Does anyone else have a similar problem?

    I have tried several apps including Adobe Reader, PDFReader Lite and iBooks to open PDF files. No files I sync to the 4S are even displayed, much less opened. I'd like to hear from anyone who has been able to overcome a similar problem.

    OK, glad that worked!
    How about trying this as step 2:
    When you open the PDF attachment in Mail that you can read, click the action (right arrow) button near the top right of your screen.  One of the options there should be "Open in iBooks".  Does that work for you?  It should!

  • Firfox will load but will not display any web page, neither will Safari, but I do not have a problem with IE.

    I can load Firefox, and get all the bars and acknowledgment itis running but I get a error message that the webpage is unavailable, all web pages, Safariis the same way. This is on my Dell Desk top, but not a problem with HP mini and using the same Internet access.

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • IChat will not display status messages.

    I'm having a problem - iChat will not display any "available" status messages. All away messages display properly, but any unique status messages will not display, nor does the word "available". I have restarted both iChat and my MacBook several times, deleted the com.ichat.AIM preferences file, but it seems nothing I do will make my buddy's unique status messages display.
    I did not previously use Chax but downloaded it to see if it would help; it didn't. I'm willing to delete it if it will solve my problem.
    Any help?
    Thanks!
    Message was edited by: Paperclippe

    Ok,
    As you either suspected or found out the Saved Status Messages are in com.apple.ihat.plist
    The fact they didn't display would suggest that they may have become corrupted and the deletion of the .plist would have helped.
    BUT you went on to mention that the Available Choice also does not display.
    This would suggest one of two things.
    1) Either you are not fully Logged in to the AIM servers properly
    Do your Buddies see you are On-line and Available ?
    Do they perceive your Status change ?
    Can you Text chat to people ?
    Can you send files or Pic in Text chats ?
    Try Deleting com.apple.ichat.AIM.plist and restarting iChat to see if that helps
    2) Something about iChat or it's support folders (the bits that make the Available show up), that are at fault.
    In this case try deleting com.apple.ichatAgent.plist
    This controls which accounts login and help the app to run some of the features such as the Video/Audio part and Text Messaging.
    I would do these one at a time just so you know which it was that fixed it.
    8:27 PM Friday; June 20, 2008

  • My iPhone 4s will not display my saved contact names anymore. What to do?

    All of a sudden, my iPhone 4s will not display any of my saved contacts names or pictures.  It only shows the number.  However, it will show my facebook contacts names and info.  I currently have iOS 7.1.1.  I I've tried turning my phone off and them back on and still nothing.  How do I get it to show my contacts again?

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How do i Restore Preview as my default viewer when using Safari,seems adobe has hi jacked Safari,if i uninstall adobe safari will not open any pdf files.

    How do i restore Preview as my default viewer.
    Seems adobe has hi-jacked Safari and and opens using abobe not preview.
    Have uninstalled adobe but safari then will not display any pdf files.
    Preview still works fine to view existing downloaded files.

    Niac --
    What kind of files?  PDFs?  or Others as well?
    If you want Preview to open all PDFs, then find a PDF on your HD.
    Highlight it, and then press the Apple/Comand key along with th letter " i " key.
    When the window comes up, look down to the "Open with" line, and change it from Adobe to Preview.
    Then look slightly below, and select "Change All."
    Now, all PDFs should open with Preview.

Maybe you are looking for

  • Setting dynamic endpoints in ESB

    Hi I have a async BPEL process(P1). It is invoking a sync ESB services(say E1). Then the BPEL process waits in a 'Receive' activity. The E1 ESB service contains a DB adapter tht calls a stored procedure, which performs some complex logic. After the t

  • How do I download a DVD from my iMac to my iPad?

    How do I downlad a DVD which plays on my iMac to my iPad?

  • Submit to SAP Button in Adobe Forms

    Hi, I have an adobe form and i have embedded it in to a Web-dynpro view.Now i have placed a "submit to sap " button on this form so that when the user clicks on this i save the contents of this form as an attachment. My Issue is that the control does

  • Model creation

    Hi, I had created an application which calls a RFC from a R/3 sever say XXX and uses WAS say YYYY. The application is working fine. Now i need to give which R/3 server is the application  using in the runtime. can we do this? For change a change in W

  • How to maintain QM set up for sample size

    Hello Guru's My Scenario is as below for  Quality Inspection : u2022     If sample size is below 25 unit, even one characteristic in inspection lot is rejected, whole sample will be rejected and subsequently the lot. u2022     If sample size is above