Maximum Athlon XP CPU support ; enter yours !

I’ve a K7T Turbo Limited Edition (3.X with Bios 3.4) but i cdo not understand what is the maximum CPU supported; In fact :
The manual says Athlon 1.3Ghz
The Board product page says Athlon XP 2Ghz
The CPU support page says Athlon XP 1.8Ghz (the OK stops there)
The Bios page says the ver. 3.3 bios supports XP up to 2Ghz
It’s a little messy, isn’t it ?

Quote
Originally posted by Bas
Hi,
The K7T Turbo supports upto the XP-1800....
Any higher can work, but you might blow the board because of the powerconsumption of these CPU's....
As the BIOS for the K7T Turbo2 is the same, but this board supports higher CPU's, it's a bit confusing that you see the above CPU's listed...
That makes no sense as the power consumtion of the xp 2000+ is lower (70 watts max according to amd tech docs) that the 1.4 gig tbird cpu(72 watts max according to amds techdocs)

Similar Messages

How to reduce from 5º to 8ºC CPU Temp on your MSI K7N2 Delta!

I've installed this tweak last week and it is working very stable since then. It decreased my Idle CPU Temp from 42º to 36º and Overload from 54º to 48º:
Just go: http://forums.pcper.com/showindex.php?t=280137
AMD ATHLON XP 2600+ 12.5x333mhz 1.65V ~OC 11.5x400mhz 1.55V
Thermaltake Volcano 9
MSI K7N2 Delta L
MSI GF4 4200-8X graphics Card
160GB Maxtor HDD 7200rpm
768MB Samsung DDR3200
LG 48x24x48x/16x CDROM/DVD Reader
Dual Fan 450W Troni Power Suppy

It seems that the link to the tweak is broken, I've found another one:
http://ftp://ftp.vector.co.jp/pack/win95/hardware/other/wpcre14.exe
This is what the article say:
Just tried it for the first time..It works GREAT
My idle temps are now 26c, down from 34c. That's 8C. I can have Winamp, IE and messenger running and CPU temps don't get by 29c. Once i fire up, SETI though...I get back my regular Load temps at 39c.
Some of you probably know about it, already....here's for thousand others that don't.
This tweak can drop your idle CPU temps down as much as 8c, maybe more...depending on your system.
First thing you need to do is download WPCRSET & WPCREDIT.
They're both in this zip.
- Extract to a directory.
- Run "INSTDD.EXE". Click Install. When done, you will be prompted for restart. Hit Yes! -
- Then go back to the folder with extracted files, and open "WPCREDIT.EXE"
- A ms-dos like window will pop-up. Move the blinking block (with arrow keys or your mouse pointer) until it says Offset 6F at the buttom. Now, click on the two digit number where it says "HEX", and change it to 1F (The Hex for Offset 6F would have previously been 9F, 8F or something else). Hit Set.
Your idle temps should now start falling.
You would have to do this hack/tweak everytime you rebooted your computer if it wasn't for WPCRSET.
- Go to directory and run "WPCRSET.EXE"
- Look at the top of the window: Enable select "Start" and make sure Device is on "enable"
- Then click Add. Enter 6F for the register, and 1F for the data
- Click Ok and you'll be prompted to restart.
Once, you rebooted, open WCREDIT again and see if the 6F register is still on 1F. If it is, then that's it..You're all done.
Here's a Screenie of how it should be:
This only brings your idle temps down, and not your full load temps
It should work for all nforce2s, and use at your own risk
Check your nf7-s for CPU Disconnect. Most other nforce2 motherboards do not have this feature in the bios...so this tweak might prove useful.
READ THE WHOLE THREAD BEFORE TRYING THIS!
If you run a Distributed Computing project...then obviously this would be of no use to you
Quote:
Originally posted by Abducted on 12-16-2003 at 03:43 PM
It activates the C1 (and maybe the C2) function Athlon XP CPU's support. Most mainboard brands have this feature as an option in the bios you can enable and disable. I just found out that EPoX doesn't have that feature. So what you're doing is just using a direct reg tweak to activate it. It's not like you're forcing anything, the Athlon XP chips are made to support this feature so it shouldn't do any damage.
When the CPU is idle the mainboard will send a command to the CPU that will cause a part of the CPU to be deactivated (and therefore not produce any heat). That's why this tweak only works on the idle temp and doesn't change anything on the load temp. Ofcourse as soon as the CPU power is needed the deactivated part will become active again, so it should have any influence on the performance of the CPU.
Strangely, my full load temp has decreased 6º C degrees too.

M55e 9637 CPU support

Hello,
I bought an used M55e 9637-BN5 computer. I would like to change the original CPU (E2140) to an E5200.
I can't find a complete CPU support list. Is this (E5200) CPU supported by my M55e?
Thank you for your replies!

Your machine has the 946GZ chipset in it, which allows use of Core 2 Duo processors, Just not sure the E5200 Wolfdale you have identified will work. Conroe definately will work, up to an E6700. Enter your machine into the quick path box on the support home page, and find the Hardware Maintenance Manual, it will tell you all iterations of your machine and which processor shipped with it. That will give you an indication of which processors will work.

K9N6SGM-V best CPU support

Dear all,
apparently there is a post here that may help me as well since I have similar problem concerning CPU compatability
My existing CPU dies and I'm looking for replacement keeping the same board ( see subject )
According to MSI web site and all the post I read , I was looking for Sempron but apparently new generation are AM3 socket and this board doesn't support such socket .
Based on the posts looks like the board may allow me to install Opteron 1210
Before to proceed with this I would like to be sure in order to don't waste my money
In other words , is the Opteron 1210 the only one compatible ?
Opteron is not listed in the CPU supported with this board according to the web
You mention that this require BIOS 1.9 update, do you mean 1.9 and higher or just limited to 1.9 ?
what is the best CPU performer for this board ( according to your experience and feedback ) ?
Thanks in advance

according to my search on the link you kindly suggested and MSI web vs AMD web , I identified few alternative :
AMD QuadCore Opteron1352( PN OS1352WBJ4BGHBOX ),Wattage75, speed 2100, Bus speed 2000,L2 Cache 2048 , Socket AM2
AMD Athlon X2 5600+ ( PN ADO-56DOBX ) , Wattage 65, speed 2900, Bus Speed 2000 , L2 Cache 2048 , Socket AM2
AMD QuadCore Opteron1354( PN OS1354WBJ4BGHBOX ),Wattage75, speed 2200, Bus speed 2000,L2 Cache 2048 , Socket AM2
All of them are AM2 and below 125W , however the only one officially supported by MSI is the Athlon , while the Opteron are not .
What you would suggest ?
QuadCore should be faster compared to Athlon , however not fully sure will be compatible with my board
Thanks again

MSI 745 Ultra CPU Support ?????

Hi,
I have just sent back my 1.6ghz Duron (applebred) due to crashes etc even slowed down to 1.2 ghz still crashes etc. I would like to know if this board will run the Duron 1.4 ghz 200 fsb ? this is not listed on the website (cpu support), is this cpu an applebred? remember its FSB is 200mhz. Please help me. Also I realise that MSI tell us about the applebred problems on their cpu support page BUT WHY do they advertise on the EBUYER website as this board being compatible with all AMD athlon/durons upto 2100+ ????? confusion city hear. Thanks

Thanks for your reply, So as i thought then BUT will the 1.4 ghz 200FSB work? it does not say on the cpu support page for MSI?????????? Thanks

How to check CPU support

Wanting to upgrade with a new cpu or running into troubles after having already upgraded frequently the question comes up if the new cpu is supported by the board used.
Before asking about that with a post you should for yourself by just going to your mainboard's product site at msi.com
There just choose your board's category (AMD or Intel Platform) and click on your board's socket and choose your mainboard:
Is your board already out of production and not mentioned you need to click Archive instead of Intel/AMD platform:
In the following pop-up just enter the name of your board, click "search" and you will be directed to the archived product site:
When you finally opened your board's product site click on "support" -> "cpu support" and all supported cpus will be listed as well as the bios version with which support for the cpu has been implemented
Is your new cpu not listed there it is not officially supported which could result in all kinds of problems from just not recognising the cpu's name string to not booting at all. Buying an unsupported cpu is therefor a gamble and not recommended.
If the new cpu is listed, you need to check if the bios installed on your board is supporting the cpu or you need to update. To figure out what bios version you have, >>use the MSI HQ Forum USB flasher<< if you want to upgrade a running system. After starting the MSI HQ Forum USB flasher it will automatically detect your board's current bios and save the details in a file on your desktop called MSIHQ_INFO.txt. There you can read up the exact bios version. Posting in a topic to get assistance you can quote this details to make it easier for others to help you
If you have just the board you can look for a tiny green sticker on the bios chip that has the version of the original bios it came with printed on it.
With new cpu generations coming up MSI usually creates microsites where you can lookup if your older board will support it.
Currently Intel platform users are wondering if their socket 1155 boards are supporting Ivy Bridge while AMD users want to know if their boards support AM3+ cpus (FX) or Vishera (2nd Generation FX) or Richland if FM2 is used. To answer if support is implemented or planned the following microsites can be checked:
>Socket 1155 supporting 22nm (Intel IVY BRIDGE)<
>AM3+ (AMD FX multicore processors) support<
>Vishera (2nd gen AMD FX multicore processors) support<
>FM2 Richland support<

Simply check the product site for cpu support (like instructed in "How to check CPU support"): http://www.msi.com/support/mb/890GXMG65.html#support-cpu

PURCHASE PROGRAM When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month. Does not this offer? M

PURCHASE PROGRAM
When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month.
Does not this offer?
Micke at Raa

Some general information... your Adobe account and your credit card details must match exactly
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
-verify email https://forums.adobe.com/thread/1446019

How do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

how do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...

I have completely disabled my iphone 3gs. It says "Iphone is diabled connect to itunes", but when I connect it to itunes, itunes says "could not connect because it is locked with a passcode you must enter your passcode on the iphone before it can be used.

My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks

You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Anyone besides me get an annoying popup that cannot be deleted/closed reading: FaceTime Password Please enter your password for "my e-mail account name" Never used FaceTime.

Dear Community,
Anyone besides me get an annoying popup that cannot be deleted/closed reading:
FaceTime Password
Please enter your password for "my e-mail account name"
It happened to me today for the first time since upgrading to Mavericks 10.9.3, no "stop lights" in the title bar of the popup, in fact nothing at all.
I've never established a FaceTime account. So I tried to delete FaceTime from the Applications folder on the "system" disk thinking this may eliminate the popup. Mavericks informed me "Cannot delete FaceTime as it is used by the operating system.
Is this a MAC virus? Or is this an example user community alpha/beta testing that Apple just announced?
TIA,
GonzoBernelli

That being the case, why then did the FaceTime popup even appear in the first place?
It's not clear to me what it is. If it occurs again, please take a screenshot of the popup and post it in a reply.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse button. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
The screenshot attachment option for this support site appears only on computers - not on iPads.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

Does your iPhone disable for 24 hours when failing a few times to enter your passcode?

Does your iPhone disable for 24 hours when failing a few times to enter your passcode?

Hello Hayema0,
After reviewing your post, I have located an article that can help with iOS passcodes. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
About iOS passcodes - Apple Support
Forget your passcode?
If you or someone else enters the wrong passcode too many times, your device will disable itself temporarily. Get help if you forgot your passcode or your device is disabled.
Learn what to do if you forgot your Restrictions passcode.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Cant purchase from Itunes - please enter your country????

So I have been able to download the free stuff from Itunes in the past. My CC expired, but in the new one and filled in the address again. The country is in bold and has US.
Get the errro message "you did not complete this form. please enter your country"
There is no drop down to change and the US is already chosen on the front page of iTMS.
Any help would be great.
Thanks
Rich

ITunes support sent email and was able to resolve

If you enter your password on the ipad too many times and your sim card locks, is there a way of recovery without replacing the sim card?

If you enter your password on the ipad too many times and your sim card locks, is there a way of recovery without replacing the sim card?

That doesn't lock the SIM card, it just locks you out of the device.
If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.
See this for more info... http://support.apple.com/kb/HT1212

None of the authentication methods supported by this client are supported by your server.

Dear Exchange Admin
We have implemented exchange server .
MAPI profile configuration in outlook is working fine.but when we try to configure POP3 in outlook ,without SMTP authentication it is fine.
But when we enable SMTP authentication ,it is getting the following error
"None of the authentication methods supported by this client are supported by your server.
Kindly help
Ashraf

This worked for me today, as I had the same issue.
I had to set encryption to TLS to get it to work, and the server names as yahoo.co.uk...
In Outlook 2013, click File | Add Account.
Select Manual setup or additional server types.
Click Next.
Select POP.
Click Next.
On the “Account Settings” page, enter your account settings:
Your Name: The name you want to show when you send email.
Email address: Your full Yahoo email address.
Account Type: POP3
Incoming Mail Server: pop.mail.yahoo.com
Outgoing Mail Server: smtp.mail.yahoo.com
User Name: Your Yahoo ID.
Password: Your Yahoo account password.
Leave the “Require logon using Secure Password Authentication” option unchecked.
Click More Settings.
Click the Outgoing Server tab.
Select the My outgoing server (SMTP) requires authentication box.
Click Use same settings as my incoming mail server.
Click the Advanced tab. Enter advanced information:
Incoming server (POP3) port: 995
Select This server requires an encrypted connection (SSL).
Outgoing server (SMTP) port: 465, 587, or 25
Set the encryption type to SSL or TLS
Set your desired server timeout and delivery options.
- We recommend leaving a copy of messages on the server.
Click OK.
Restart Outlook.
Click Send/Receive All Folders.
You can now retrieve emails from your Yahoo Mail account in Outlook 2013.

Maximum Athlon XP CPU support ; enter yours !

Similar Messages

Maybe you are looking for