Maximum character output size limit reached

While importing data in Lumira using HANA based universes I am getting an error maximum character output size limit reached. Will appreciate any info on which server parameter controls this property. Attached the error message.

Hi everyone,
I believe Henry Banks discovered a solution for resolving this kind of error message. This is a limit which can be changed from within the "Web Intelligence Processing Server" from your CMC based on large amount of rows in your data. You can find his post about this here.
It's roughly about half way down the page and I hope it helps.
-Khuram

Similar Messages

  • Error message "Maximum character output size limit reach Err_WIS_30272"

    Users are getting the Error message "Maximum character output size limit reach Err_WIS_30272" while creating the Universe Query in the Live Office, but when they create the same query in the Web intelligence Report then it work fine.
    To resolve this error message we can have to increase the value of "Maximum Character Stream Size" parameter in the Web intelligence Processing Server.
    But i want to know the reason why the error message is only appearing in the Live Office Query, where it work fine in Web intelligence Query.
    Are there architectural difference in Web intelligence and Live Office?

    Hi,
    maybe one of the following SAP Notes will answer your Question.
    https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133373030343526
    https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133373537353526
    https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133383336363426
    Regards
    -Seb.

  • Cant send a picture message, message size limit reached

    My droid razor just recently started to not let me add pictures to messages. It says the pictures to large that it has to be resized, its always said that but then it would resize it and it would send. but now it is starting to say message size limit reached sorry, you cannot add this picture to your message i tryed to use old pictures in a message that ive previously been able to send and i get the same message. My pictures are set on widescreen 6MP right now and video resolution HD+ (1080p) i tryed changing these settings and it still doesnt work. i have pictures that are 1.2MP and they wont even send. it wont let me send a video or audio either only text. Please help!

        zjoy622011-
    I definitely want to help restore the devices capability of sending photos! Has the device gone through any recent updates? Is this just picture messaging, or also photo sharing like Facebook, Instagram, etc? If you are using any third party texting apps, I recommend trying the built-in messaging app instead. Also, what city & state are you located in? I want to ensure there are no issues related to the network involved here.
    Keep me posted!
    Thanks,
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • Max Character File Size Limit exceeded.The document is too large to process

    Hi
    I have  made set on section on products in report.
    the Reports contains around 50 products when im opening the report
    in draft mode the following error is displayed
    "Max Character File Size Limit exceeded.The document is too large to be proceesed by the server .Contact your business Objects Administrator."
    can some body help me out how to increase my report character file size

    Hi,
      If you are using Business Objects XIR2, there is a performance parameter in the Web_Intelligence Report Server where you can increase the size of that file. The parameter is Maximun Character File Size. Go to the CMC>Server>server.Web_IntelligenceReportServer in the Properties tab you will see it.
    Cheers,
    Luigi

  • Logfile size limit reached - logging stopped

    From time to time, quite often, a pop-up window appears on my screen and says:Logfile size limit reached - logging stopped. I only can push "Accept" button or close it, but it rises again some time later. I haven't found any information on the web.

    Hello,
    I had this problem too, but I found the cause of it. It's comes from the extension 'IPLogger 1.6'.
    This extension store, for every connexion, your IP adresse in a logfile, so after some times the file is full and the message "Logfile size limit reached" is displayed.
    The best solution is to completely remove this extension, and replace it by similar one, like 'External IP'.
    Now, the problem is solved for me :)
    p.s. This problem should be considered as a bug for extension IPLogger. The logfile should be cleared when full instead of diplaying this annoyinf message !

  • ISE Alarm: Warning: Profiler Queue Size Limit Reached

    Anyone know what this error means and more importantly, is it anything to really be concerned about?  We started receiving this today for one of our PSNs and have been getting the alert every five minutes.  There hasn't been any 'known' impacts from this but it's very annoying and the Cisco documentation is a little vague.
    Thank you....

    Hmm, I am sorry but I will have to ask more questions:
    1. You mentioned that your PSNs are behind a load balancer, but are the nodes in a "node group?" If they are not you should place them in a node group. If they are you will need to split them as the max recommended nodes per node group is 10. 
    2. If the nodes are indeed in a node group are they all L2 adjacent?
    3. If your deployment consists of VMs and not physical appliances, can you confirm that both the adequate CPU/RAM are allocated and reserved for the VMs?
    Here are also some recommendations:
    1. If possible, move to IOS sensor on all of your switches and disable the probes that will no longer be needed. 
    2. If #1 is not possible check the configurations on your NADs and where Device Sensor is configured you should remove, IP Helper and SNMP Query based configs. This will prevent duplicate information from being sent to the PSNs
    3. Look to completely eliminate SNMP Traps based configurations for ISE. That probe along with Netflow and the Span probes are pretty heavy hitters
    4. Make sure that you are using Device Sensor on your WLCs as well
    5. Use the latest patch
    6. Get a support case going with Cisco and have them take a look :)
    For more info you should take a look at the following Cisco Live Sessions:
    BRKSEC-3697 and BRKSEC-3699
    Thank you for rating helpful posts!

  • Keithely 6487 showing output current limit reached even without any voltage applied ...

    I am using two keithley 6487 through labview to scan the voltage for an
    ion beam deflector. recently one of them started showing cmpl on the
    front panel ocomp also flashes. all the probes i opened and run it
    through frontpanel. still the problem persists. tried to update the
    firmware and it failed to complete updating .
    can any one give any clue why this happens. the interlock connector is proper.
    this
    is not a question directly linked with labview but i could not find any
    other active forum to post the problem. i apologise.
    pls help me to recover it.
    thanking you
    ranjini

    Hi ranjini,
    If your device failed during a firmware update, it probably is not in a operable state. I recommend contacting the manufacture to see if they have methods of recovering from a failed firmware update.
    Did you receive an error when the upgrade failed?
    Here is some information from the manufacturer website:
    Known Issues:
    When using RS-232 interface, The user may get a timeout error
    at 99% (after instrument resets):
    "Timeout Error: Error In Programming Model mmmm!".
    This error can be safely ignored.
    http://www.keithley.com/support/data?asset=13399
    Sappster

  • Want to know Maximum size limit for TimesTen version 5.1.x

    Hello,
    I know that in prior releases the maximum TimesTen database size limit was 2GB.I got this info from one of the TimesTen documentation.
    As of now Im using version 5.1.x.Here Im not able to get any info regarding the maximum size limit of a TimesTen datastore. Please help me
    Thanks In Advance
    Pratheej

    Also be aware that on Windows you can rarely achieve a data store size of >1g
    It's down to the way Windows handles it'd DLLS - they tend to get loaded in a fragmented way and since TimesTen needs one contiguous slice of shared memory this causes a problem.

  • Maximum input payload size(for an XML file) supported by OSB

    Hey Everyone,
    I wanted to know, what is the maximum payload size that OSB can handle.
    The requirement is to pass XML files as input to OSB and insert the data of the XML files in the oracle staging tables. The OSB will host all the .jca,wsdl, xml, xml schema and other files required to perform the operation.
    The hurdle is to understand, what is the maximum XML file size limit, that OSB can allow to pass through without breaking.
    I did some test runs and got the following output,
    Size of the XML file:  OSB successfully read a file of size, 3176kb but failed for a file of size 3922kb, so the OSB breakpoint occurs somewhere between 3-4 MB, as per the test runs.
    Range of number of Lines of XML:  102995 to 126787, since OSB was able to consume a file with lines (102995) and size 3176kb but broke for a file with number of lines (126787) and size 3922kb.
    Request to please share your views on the test runs regarding the OSB breakpoint and also kindly share the results, if the same test has been performed at your end.
    Thank you very much.

    Hey Everyone,
    I wanted to know, what is the maximum payload size that OSB can handle.
    The requirement is to pass XML files as input to OSB and insert the data of the XML files in the oracle staging tables. The OSB will host all the .jca,wsdl, xml, xml schema and other files required to perform the operation.
    The hurdle is to understand, what is the maximum XML file size limit, that OSB can allow to pass through without breaking.
    I did some test runs and got the following output,
    Size of the XML file:  OSB successfully read a file of size, 3176kb but failed for a file of size 3922kb, so the OSB breakpoint occurs somewhere between 3-4 MB, as per the test runs.
    Range of number of Lines of XML:  102995 to 126787, since OSB was able to consume a file with lines (102995) and size 3176kb but broke for a file with number of lines (126787) and size 3922kb.
    Request to please share your views on the test runs regarding the OSB breakpoint and also kindly share the results, if the same test has been performed at your end.
    Thank you very much.

  • Maximum hard drive size for 350 MHz slot loading?

    Hello,
    What is the maximum hard drive size for a 350 MHz slot loading imac?
    I am aware of a 128 GB limit on imacs. Does the 128 GB hard drive limit apply to all imac CRTs or just the earlier models?
    Here are the specs of my imac:
    Blueberry 350 MHz
    Slot loading CD-ROM drive,
    6 GB hard drive
    Is the maximum hard drive size limit of 127GB apply to this particular model?
    Thanks

    Yes, the last CRT iMac was in 2001. The first machines with built-in greater than 127 GB support were released in June 2002, as this article explains:
    http://docs.info.apple.com/article.html?artnum=86178
    So all CRT iMacs have that limiation.
    http://support.apple.com/specs/imac/
    The 8 GB limit is explained here:
    http://docs.info.apple.com/article.html?artnum=106235

  • S1000 Data file size limit is reached in statement

    I am new to Java and was given the task to trouble shoot a java application that was written a few years ago and no longer supported. The java application creates database files the user's directory: diwdb.properties, diwdb.data, diwdb.lproperties, diwdb.script. The purpose of the application is to open a zip file and insert the files into a table in the database.
    The values that are populated in the diwdb.properties file are as follows:
    #HSQL Database Engine
    #Wed Jan 30 08:55:05 GMT 2013
    hsqldb.script_format=0
    runtime.gc_interval=0
    sql.enforce_strict_size=false
    hsqldb.cache_size_scale=8
    readonly=false
    hsqldb.nio_data_file=true
    hsqldb.cache_scale=14
    version=1.8.0
    hsqldb.default_table_type=memory
    hsqldb.cache_file_scale=1
    hsqldb.log_size=200
    modified=yes
    hsqldb.cache_version=1.7.0
    hsqldb.original_version=1.8.0
    hsqldb.compatible_version=1.8.0
    Once the databsae file gets to 2GB it brings up the error meessage 'S1000 Data file size limit is reached in statement (Insert into <tablename>......
    From searching on the itnernet it appeared that the parameter hsqldb.cache_file_scale needed to be increased & 8 was a suggested value.
    I have the distribution files (.jar & .jnlp) that are used to run the application. And I have a source directory that was found that contains java files. But I do not see any properties files to set any parameters. I was able to load both directories into NetBeans but really don't know if the files can be rebuilt for distribution as I'm not clear on what I'm doing and NetBeans shows errors in some of the directories.
    I have also tried to add parameters to the startup url: http://uknt117.uk.infores.com/DIW/DIW.jnlp?hsqldb.large_data=true?hsqldb.cache_file_scale=8 but that does not affect the application.
    I have been struggling with this for quite some time. Would greatly appreciate any assistance to help resolve this.
    Thanks!

    Thanks! But where would I run the sql statement. When anyone launches the application it creates the database files in their user directory. How would I connect to the database after that to execute the statement?
    I see the create table statements in the files I have pulled into NetBeans in both the source folder and the distribution folder. Could I add the statement there before the table is created in the jar file in the distribution folder and then re-compile it for distribution? OR would I need to add it to the file in source directory and recompile those to create a new distribution?
    Thanks!

  • Maximum Character size of Front Panel indicator in LabVIEW

    Hi,
    I have a simple question that I hope somebody can answer.  Is there a maximum character size that can be displayed in a Front Panel indicator in LabVIEW?  If so, what is it?  I have a VI that is continuously reading a serial port and updating a front panel indicator, and I need to know how much text can be displayed before it either truncates or throws an error.  This is for LabVIEW 2010 SP1.
    Thank you,
    J Korn

    A quick Flatten to string shows how LabVIEW stores strings {size-data} Size is a U32 so 4294967295 characters max.
    The big thing to remember is this memory must be contiguous (and the Indicator requires a COPY) so in practice the performance hit for constantly allocating larger and larger buffers for the data and available memory impose practical limits much lower than the 4294967295 Char maximum.  Probably better to log the data to a file and maintain only the last x characters on the indicator and use the file to look a history data
    Jeff

  • Is there a Maximum file size limit when combining pdf files

    I am trying to combine files 8 PDF files created with i Explore using Acrobat XI Standard, the process is completed but when opening the file not all 8 individual files have been combined only the first two have been combined, the process shows all eight being read and combined.
    I can open and view each of the original 8 individual files and read the content without any issue, the largest of the eight files is 15,559kb and the smallest is 9,435kb
    if anyone can assist that would be most appreciated

    Hi Tayls450,
    This should not have happened as there is no maximum file size limit when combining PDFs.
    Please let me know if there are some password protected PDFs also?
    Also, I would suggest you to choose 'Repair Acrobat Installation' option from the Help menu.
    Regards,
    Anubha

  • Maximum time/size limit for Beehive Conference recording

    Hi, What is the maximum time/size limit for Beehive Conference recording?
    Thanks
    Chinni

    Looks like I found the probable location of this size limit.  Looking at the web.config file in the
    ExchServer\ClientAccess\Sync folder there is an entry for "MaxDocumentDataSize".  THe value is currently set at 10240000:
    <add key="MaxDocumentDataSize" vaulue ="10240000">
    So this is 9.75 MB or there about, which sounds about right.  I will try increasing this limit at some point to verify.
    Can anyone confirm this?

  • Mailbox database admission control by maximum mailboxdatabase size limit

    I would like to have a feature which allowes to set a maximum size limit on a mailboxdatabase. This way we can keep the mailboxdatabases around a certain size. Existing mailboxex within the mailboxdatabase can grow according to their sizing
    limits but no new mailboxes can be added or moved to it. In collaboration with the new automatic distribution feature you can migrate more efficiently and keep maintenance and restores times low.

    Hello,
    Accroding to your description, I understand that you want to set a maximum size limit on a mailboxdatabase. Your purpose for this doing is that existing mailboxes size within the mailboxdatabase can grow, but new mailboxes can't be added or
    moved to it? If so, I'm afraid that there is no way to set a maximum size limit on a mailboxdatabase in exchange 2013 server. But we can control automatic mailbox distribution sing database scopes.
    Here is an article for your reference.
    http://technet.microsoft.com/en-us/library/ff628332(v=exchg.150).aspx
    If I have any misunderstanding, please free let me know.
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

Maybe you are looking for

  • Classpath issues when executing from a jar

    I have a jar that I built for an RMI server that has a need to access another jar. (log4j). I run the jar from the command line using: java -jar -Djava.rmi.server.codebase=my.jar my.jar and the code runs fine but when I try to add in the log4j.jar I

  • Need assistance converting some AS2 code to AS3

    Hi, I have some simple AS2 code that brings in a MovieClip when you click a button. This is currently AS2, and I would rather convert it to AS3. I also have some code which closes the MovieClip upon button Click. The code I am currently using is belo

  • Image automatically changing resolution with HDR and Photomerge in CS4

    I am trying to create Hi Res Panoramas and HDR images using Photoshop CS4. It seems that the resulting image is a much lower resolution than I expected (ie the image has been downsized by 50% and changed to 240 dpi). I can do the smame thing on my la

  • How do i change aspect ratio in iMovie?

    I was sent a video whose aspect ratio is messed up-squished vertically. I imported it into iMovie anyway thinking I could correct it. I thought it would happen i the Export dialog where I input a custom size. But it hasn't worked.

  • Hot to gain space back in a tablespace after purging

    Hi, We are Oracle Apps shop running 11.5.0.2 and DB on 11.2.02 Some of our tablespaces are about 90% full. I can always add dataifles to it, but before that, I purged a lot of old WF data (almost 3 M rows). But my tablespace is still showing me 90 %.