Maximum message size for internal users

Hi,
Is it possible to configure a maximum message size for internal users and also create exceptions?
The templates available in Transport Rules only allow for "when size of any attachment is greater or equal". This is not ideal as users can add 50 X 1MB attachaments to an email etc.
Configuring Transport settings or Receive Connectors do not allow for exceptions.
Thank you.

Hi Prakash,
Thanks for the link to the thread. The AD site link configuration is valid but does not account for the required exceptions. E.g User A can send unlimited size message to User B but not to User C.
The thread also mentions the Transport Rule configuration stated in my original post but that configuration has one major flaw. Users can circumvent the control by splitting attachments.

Similar Messages

  • Modify Max Message Size for particular users

    I have been requested to permit a group of users (identified with email accounts) to receive emails up to 30 MB. I have check that I have to make modifications in the HAT.
    I think the only solution should be to create new policies:
    Trusted-new
    Blocked-new
    Throttled-new
    Accepted-new
    and in every policy permit a Max Message Size of 30MB. After that, every user should be able to receive 30 MB emails.
    Is there a way to permit that only for a group of receiving users, without considering the sender?
    I would be glad if anybody get me a clue, thanks!!
    Sergio

    You would have to accept the message in the HAT and then use an Incoming Mail Policy to select recipient addresses. Add a content filter to that policy to select on size.
    Since it sounds like only a few users should be able to recieve large messages you could use two policies.
    1) Large message recipient policy
    message size < 30mb, Action=DeliverNow
    2) Default policy
    If message > 10mb, Action=Bounce
    You just can't bounce the messages right in the SMTP conversation is the only real limitation.

  • Maximum message size for download

    Hi - I have a problem in that Mail seems to have trouble downloading anything larger than approx 15mb. I occasionally get sent emails that are up to 30mb in size. They reach my mail server at the ISP without issue - it's just mail that chokes on them... Currently I have to use the web control panel from my ISP to access and download the big emails...
    Is there a defined maximum size of message that Mail is limited to use?
    Thanks for your help/comments!

    Hi Prakash,
    Thanks for the link to the thread. The AD site link configuration is valid but does not account for the required exceptions. E.g User A can send unlimited size message to User B but not to User C.
    The thread also mentions the Transport Rule configuration stated in my original post but that configuration has one major flaw. Users can circumvent the control by splitting attachments.

  • JMS Adapter Maximum Message Size Restriction and Impact

    Hi ,
    We have business requirements,where the Maximum message size that needs
    to be sent or received from  around 25 to 30MB usig JMS XI channels.
    But, "Note 856346 - J2EE JMS Adapter: Frequently Asked Questions (FAQ)"
    specifies as below,
    2.12)What are the message size restrictions in 640/700 release and also
    710 releases?
    Answer: The maximum message size for 640/700 releases is "10MB"
    Please let us know,
    1) If you see any issues with JMS XI Adapter handling 30MB messages in
    Production systems.
    2) If 30MB is huge, what is the maximum permissible message size
    greater than 10MB as break point.
    regards,
    Amit

    1) If you see any issues with JMS XI Adapter handling 30MB messages in
    Production systems.
    If message size beyond 10MB then the message wont come to SXMB_MONI itself.....may be even in CC monitoring there may not be an entry....you mentioned Production Systems.....did you checked in Dev? The behavior wont change from Dev to Prod.
    2) If 30MB is huge, what is the maximum permissible message size
    greater than 10MB as break point.
    10MB itself is the limit...anything above that wont be processed.
    Regards,
    Abhishek.

  • How to allocate disk size for each user in iMac?

    Hi folks,
    I have iMac (Mac OS X, version 10.7.5) for Family, and each of my family member has account on it.
    Now, kids download many large files (several GB size files) and HD is getting full.
    So, I'd like to set maximum disk size for each user.
    Could you prvide instruction how to configure disk size for each user?
    Regards,
    Hiro

    I don't know of any way to do that by user.
    I used to partition my HD and that sets a hard limit by partition, but by user? I don't think it can be done.

  • Extending maximum message size

    I want to extend the maximum message size for a standalone client which is implemented according to the documentation. The server (9.1) is already configured for an extended message size of 20000000 via web console (environment - server - protocols - general). But I get the "weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'" independently whether I give the parameter "-Dweblogic.MaxMessageSize=20000000" (or MaxT3MessageSize) to the clients jvm or not. How can I increase the message size?

    It doesn't seem to throw an error message - at least not in the logs that I have searched through -but rather simply rejects the message. Everything works properly if the message is trimmed to fit the 64K limit.
    The message recieved by the java application:
    javax.jms.JMSException: JMSRemoteServer[server1:3701]: remote server is closed
    at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1853)
    at com.evermind.server.jms.JMSRemoteServer.assertOpen(JMSRemoteServer.java:691)
    at com.evermind.server.jms.JMSRemoteServer.assertOk(JMSRemoteServer.java:700)
    at com.evermind.server.jms.JMSRemoteServer.enqMessage(JMSRemoteServer.java:614)
    at com.evermind.server.jms.EvermindSession.send(EvermindSession.java:1098)
    at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:409)
    at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:201)

  • Exchange 2007 send connector does nor respect Maximum message size (sometimes...)

    Hi to all
    We have 9 email server, 5 Mailboxes, 2 CAS and 2 HT, We began to have problems to send and receive from internet; so I checked the queues and I discovered that some users are sending messages with a size greater than 16 MB, althought internally can send
    until 40MB, if they send externally, only until 16MB.
    I revised all the configuration:
    Organization Configuration/Hub Transport/Global Settings/ Maximum send size (KB):40960
    Server Configuration/Hub Transport/HT01/Receive Connectors/Default HT01/Maximum message size(KB): 40960 (only this server can send outside, the other server is in spare)
    Organization Configuration/Hub Transport/Send Connector/SendMailOuside/Maximum message size(KB) 16386
    We send by an Smart host that is used only by the HT01 to a Symantec server.
    With this, we have this situations:
    In the queue, I see some users are sending emails with a size more than 16MB outside the organization, I revised their configuration and the "maximun send size" is clear the checkbox (just like my account), the weir is if I try to send an email
    with a size more than 16MB, I got the message: "#550 5.3.4 ROUTING.SizeLimit; message size exceeds fixed maximum size for route ##", this is not sense because their account configuration is the same like mine, so the Exchange must not let
    them to put the email in the queue...
    If between internal users try to send an email with size more than 16MB, this is allowed and it's send without any problem
    So I don't know where is the misconfiguration, is permited to send mails with size less than 40MB internally, but externally only until to 16MB, but I din't know why the Exchange system let some users to send (or at least put in the queue) this kind of messages,
    my account is in the same DB like the other users...
    I hope to be clear in the description of the situation, maybe a patch or some thing, the HT server has the January patch and in april will be applied the last patchs.
    Doc MX

    Hi DocMX,
    Thank you for your question.
    We could run the following command:
    Get-TransportConfig | FL max*size
    Then, we could check the send connector by the following command:
    Get-SendConnector | FL Identity,MaxMessageSize
    We could run the following command to check an individual user maximum size.
    Get-Mailbox <username> | FL Name,Max*size
    In my solution, we could rebuild the user profile that those users could send emails more than 16MB to check if the issue persist.
    We could also restart the service of “Microsoft Exchange Transport”.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • 552 Message size exceeds maximum message size

    [Dell Inspiron 560 desktop;
    MS Windows 7 Home Premium SP1 64bit; Windows Live Mail 2011; MS Word Pro 2003; Mozilla Firefox 22.0; Adobe FP 11,8,800,94; Adobe Reader 11.......]
    Hello, I have the same problem, 10 emails I sent out bounced with the following same error message:
    ">>>xxxxxxxxxatxxxxxxxx.co.il(reading confirmation): 552 Message size exceeds maximum message size"
    And they also sent the headers....which is all Greek to me.  Being a very beginner computer user, I can't execute the good advice given here.
    This is very strange since the emails so bounced only had 5 small pictures I had taken in my small, cheap dig camera, while other messages I had sent out
    successfully before were probably 4 times as big.
    Also, whose fault is it: my server RCN?  Microsoft?  I wonder...
    I hope there's something easier for me to do to fix this problem? 
    Thanks ever so much for any help!  :)      Adela

    It says to me that the message you sent was rejected along the way because it was too big.  Ask the e-mail administrator of the system that's bouncing it.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Maximum font size for auto-sized form text

    You need to let the user select a maximum font size for automatically sized text. If most of your fields are set at 10pt type, but you have one field for which you want the text to resize automatically, it looks stupid if that cell contains a small amount of text that’s set at 16pt or whatever. If you could set the maximum font size to 10pt for that field, then the text would be consistent with the text in the other fields unless there is so much text that it needs to scale down.

    Can anyone please advise?
    Cheers

  • Maximum file size for export into MP4?

    Hello,
    I am not able to export 2 hour HD video into standard MP4 file. It seems that reaching 100% export algorithm gets into loop. I was waiting for hours and still had seen progress at exactly 100% with final file size on hard disk to be 0 bytes. I am using CS5 on MAC OS X. I had to split my timeline to 2 parts and to export them separately (which is embarrasing). Is there something like maximum file size for export? I guess that 2h video would have about 25-35GB.
    Thank you
    jiri

    You are right.
    So I am running AP Pro 5.0.4, Adobe Media Encoder 5.0.1.0 (64bit). Operating system Mac OS X ver 10.7.3. All applications are up to date.
    MacBook Pro Intel i5 2.53GB, 8GB RAM, nVidia GT 330M 256 MB, 500GB HDD
    Video is 1920x1080 (AVCHD) 25fps in a .MTS container  (major part of timeline), 1280x720 30fps in .MOV container (2mins), Still images 4000x3000 in .JPG
    No error message is generated during export - everything finishes without any problem...just file created has 0 byte size (as described above).
    This is my largest video project (1h 54min) I dont have any other problem with other projects.
    I dont run any other special software, at the moment of export all usual applications are closed so that MacBook "power" can go to Media Encoder. No codecs installed, using VLC Player or Quick Time.
    Attached please find printscreen from Export settings (AP Pro). Writing this ppost I tried to export only the first 4mins from timeline where all kind of media is used...and it was OK.
    As a next step I will try to export (same settings) 1h 30mins as I still believe problem comes with length of video exported.
    Let me know your opinion

  • Maximum package size for data packages was exceeded and Process terminated

    Hello Guru,
    When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
    Thanks & Regards,
    Suresh.

    Hi,
    When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
    1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
    2) Run the load only to PSA.
    3) Once the load is succesfull , then push the data to targets.
    In this way you can overcome this issue.
    You can also try RSCUSTV* where * is an integer to change data load settings.
    Change Datapackage size for extraction, use Transaction RSCUSTV6.
    Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
    IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
    Hope this helps.
    Thanks,
    JituK

  • Maximum package size for data packages was exceeded?

    Hi Experts,
    I am facing this problem "Maximum package size for data packages was exceeded". When I am trying to laod. I even tried to reduce data packet and change DTP settings in EXtraction to Get All New Data Request by Request but still same error is occuring. Can u Plz focus light on this.
    Thanks,
    Krishna

    You can refer to the below OSS note:
    Note 1144332 - Consulting note: Message RSBK 250: Package size exceeded
    And other related notes: 352038, 417307
    Hope this helps.
    Murali

  • Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

    Hello,
    I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
    I've been receiving these errors at boot;
    Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
    Source:        Microsoft-Windows-Kernel-EventTracing
    Date:          11/10/2009 7:51:03 AM
    Event ID:      4
    Task Category: Logging
    Level:         Warning
    Keywords:      Session
    User:          SYSTEM
    Computer:      herbt-PC
    Description:
    The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
        <EventID>4</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>1</Task>
        <Opcode>10</Opcode>
        <Keywords>0x8000000000000010</Keywords>
        <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
        <EventRecordID>28</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="164" />
        <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
        <Computer>herbt-PC</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="SessionName">ReadyBoot</Data>
        <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
        <Data Name="ErrorCode">3221225864</Data>
        <Data Name="LoggingMode">0</Data>
        <Data Name="MaxFileSize">20971520</Data>
      </EventData>
    </Event>
    The image for PID 4 is listed as System.
    My searches have turned up similar events listed but no solutions.
    Any help would be appreciated.
    Cheers!

    Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
    As suggested above I assume this is a microsoft issue?  It has been discussed here and other forums for quite some time.  I never have seen a fix?  I wish when we received errors of this nature microsoft would tell us what they were.  How is this related to superfetch?  What is superfetch?  Why would superfetch have changed?
    BY THE WAY....  Superfetch is on(started) is on automatic and logs on as local system.  So this is not the cause of my issue.  Also what is readyboot?  Does the average computer really know what these programs/services or unique microsoft words/terms are?
    System
    Provider
    [ Name]
    Microsoft-Windows-Kernel-EventTracing
    [ Guid]
    {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
    EventID
    2
    Version
    0
    Level
    2
    Task
    2
    Opcode
    12
    Keywords
    0x8000000000000010
    TimeCreated
    [ SystemTime]
    2010-04-11T14:35:49.829600000Z
    EventRecordID
    25
    Correlation
    Execution
    [ ProcessID]
    4
    [ ThreadID]
    48
    Channel
    Microsoft-Windows-Kernel-EventTracing/Admin
    Computer
    Daddy-PC
    Security
    [ UserID]
    S-1-5-18
    EventData
    SessionName
    Circular Kernel Context Logger
    FileName
    ErrorCode
    3221225525
    LoggingMode
    268436608
    Windows7, Windows, Win7

  • Maximum Message Size

    Hi,
              I have had to increase the Maximum Message Size on each of several weblogic server instances from 10,000,000 bytes to 30,000,000 bytes. The upper limit for this value is 2,000,000,000 bytes.
              What are the performance implications for the other server instances when this field limit is increased?
              Does anyone have a recommended initial value for this?
              Any help would be greatly appreciated.
              Thanks.

    Hi,
              This maximum message size helps guard against a denial of service attack in which a caller attempts to force the server to allocate more memory than is available thereby keeping the server from responding quickly to other requests.
              Secure value is 10000000.
              Go through the following link and find the needfull information on this issue.
              http://e-docs.bea.com/wls/docs90/wlsmbeanref/core/index.html
              Regards
              Anilkumar kari

  • Maximum Message size OSB can handle

    Hi,
    I am trying to find out the maximum message size OSB can handle without any problems.
    I know this may be dependant on JVM settings etc,but what is a safe limit.Can the payload size be of 1 GB etc , say for a WSDL based proxy service.
    Any formal documentation on the size of messages?
    Thanks.

    Hi ,
    Please check the following links
    https://kr.forums.oracle.com/forums/thread.jspa?threadID=2125210
    https://kr.forums.oracle.com/forums/thread.jspa?threadID=2167494

Maybe you are looking for