Maximum no. of order proposals per deadline exceeded

Hi PP gurus,
When I am running MRP through T Code MD42, the error :Maximum no. of order proposals per deadline exceeded is coming.
In the material master Lot Size is Fixed order quantity (FX) wit Fixed lot size 65, when I am changing this to >80 , MRP Run is executing without any error. Pls. come with your views reg this
Note :In OPPQ Max no of proposals is 50 and in OMDV No of planned order is 500.
Anupama

Hi Datta...
I have the same problem, when I want to run MRP there is a message error "Maximum no. of order proposals per deadline exceeded". I was maintained forecasting and MRP on material master for this material.
I try to change the value of max no. of proposal of 50 to 80. And the problem is fix..
My question, Why I must increase the value? And how the fixed value that I must set in SPRO?
Thx u

Similar Messages

Troubleshooting Maximum No. of Order Proposals Exceeded

Hi PP Gurus,
Can any of you tell me the best way to troubleshoot the above problem after an MRP run? When I run MRP in the background - MDBT I occasionally get an error in the log saying "Maximum no. of order proposals per deadline exceeded" for one or more materials. I have found I can track this down using CO46 and showing only transaction with exception group 8 (terminations) but I have to run this one MRP Controller at a time and I have around 20.
Any suggestions for a simpler method.
Thanks,
R

Dear,
Please refer my reply from this link,
Maximum no. of order proposals per deadline exceeded
Regards,
R.Brahmankar

ORA-20001: Maximum number of email messages per workspace exceeded

Greetings. We are running APEX 4.1.1. I have an application where we have to send out email messages to a list of emails. Currently there are 2469 email addresses. Originally we put the email addresses in the BCC but we received an error that we had exceeded the size limit of the BCC. So we modified our procedure to send one email at a time, in a loop.
Now we are receiving the following error message:
"ORA-20001: You have exceeded the maximum number of email messages per workspace"
Has anyone else run into this issue? What is maximum number or email messages per workspace? Is it a limit per day, per session?
We have not added emails to this table since last year, so the maximum number of email messages allowed may have changed recently?
I did find this Forum post that addressed the issue but no one responded:
How many mails i can send at a time per day using APEX mail system?
Thanks,
John

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

SNP heuristic error maximum number of orders per period reached

Hello All,
I am getting one strange error "APO SNP heuristic error maximum number of orders per period reached (000000040)"
Product XXX/ Location XXX: Maximum number of orders per period reached (000000040)
For the problem : PPDS heuristic is working fine, while running the SNP heuristic I am getting this problem.
Please let me know asap.
Thanks in Advance,
Kind Regards,
Santosh

There is a section in the IMG where you can change this behaviour.
in SPRO - SAP SCM - IMG
-> Advanced Planning and Optimisation
-> Supply Chain Planning
    -> Supply Network Planning (SNP)
       -> Basic Settings
          -> Maintain Global SNP Settings
You will see the field "Heu.: Orders per Bkt" which should have the value of 40 in there, e.g. the limit to the number of orders SNP can raise in any planning bucket.
If you raise this number (to say 100) then hopefully your message will no longer be issued by the system.
Alternatively, you can check the cause of why the system is rasing so many orders. For example, check the lot size that the Product has for that location (lot-for-lot will create an order for every demand for example).
Hopr that helps
Regards
Ian

Stream analytics - Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5

Hi,
I have configure stream analytics to read messages from eventhub and I am getting this error message:Correlation ID:
e185534f-9e82-4efc-8050-5294796fb275
Error:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5 TrackingId:4569eca8-cb70-4c50-96cd-5868bfbc3e37_B45,TimeStamp:1/7/2015 11:40:37 PM TrackingId:f408292e-0dab-40cc-8ae9-2730313c3241_B45, Reference:8fca3c6a-b0d1-41cf-a835-f7c74a2ea8c3,
Timestamp:1/7/2015 11:40:37 PM
Message:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5
Message Time:
2015-01-07 23:40:38Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.naveenevents_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Receive Events
Microsoft.Resources/ResourceUri:
/subscriptions/f122f431-ddc7-4e21-ae3a-f6a9e1273bcb/resourceGroups/StreamAnalytics-Default-Central-US/providers/Microsoft.StreamAnalytics/streamingjobs/Naveenstreamanalytics
Type:
EventHubInputAdapterEventHubFailure
Any help on the same is appreciated.
Thanks
Naveen

Hi Naveen,
Thanks for reporting this issue. We are taking a look at this issue.
Questions:
Do you have multiple readers reading from this EventHub, or have you setup multiple Stream Analystics jobs reading from this event hub. You are hitting a limitation of how many readers are allowed per EH consumer group.
What is the serialization format of your input (JSON/CSV)? Could you please verify the serialization format setup in the streaming job and if it matches your data?
Thanks
Zafar Abbas

Limiting Order Proposals

We have a business scenario where we will only intend to produce over a period of time a particular quantity that are customer has committed to buy. There may be multiple process orders over the course of weeks or months to make this quantity. Materials are procured by vendors based on that quantity, and not tracked in SAP.
However there are circumstances where forecast or sales orders may exceed this committed quantity, and planned orders generated by the MPS run can then exceed committed quantities.
There is a need for this to be flagged for the planner for followup to either reduce the demand or to expedite additional materials with the vendors.
Is there any way for the system to keep track of historical and planned production and to generate an exception message if order proposals exceed committed quantity, prevent MPS from creating planned order proposals beyond committed quantity, or to prevent conversion of planned orders to process orders when they would cause the committed quantity to be exceeded?

Hi,
It looks as if you are doing material allocations per customer.
There's a specific functionality for this, check it up.
After you have defined the allocations, you then can use the atp logic against these allocations.
This will lead close to what you are looking for, since if a customer has used all of its allocation the system will not commit any further, even if there is stock available.
Hope this helps a bit; I know that there's some work to do to make this work.
Regards,
Mario

Maximum package size for data packages was exceeded and Process terminated

Hello Guru,
When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
Thanks & Regards,
Suresh.

Hi,
When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can overcome this issue.
You can also try RSCUSTV* where * is an integer to change data load settings.
Change Datapackage size for extraction, use Transaction RSCUSTV6.
Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
Hope this helps.
Thanks,
JituK

Order Value will be exceeded Msg No. F5373

Hi,
"Downpayment should not be more than PO Value(Base Amount)" for this in OBA5 instead of W message i put it as a E message.
Now, while making downpayment F-48 system is not accepting more than PO value (Base Amount), but we need to make downpayment above PO value means Base Amount plus all taxes.
To accept Base Amount plus Taxes is there any settings need to be done?
Please guide me..
Thanks in Advance
Regards,
Schilukuri

While making downpayment (f-48) system showing an error as "Order Value will be exceeded Msg No.F5373"
Because in OBA5 we have made it as Error message instead of Warning message.But it should be like that as per our requirement.
If we fill Tax Code and Tax Amount fields might be it will accept more than PO value means PO Base Amount plus Tax amount.
But I am not able to see the fields Tax Code and Tax Amount..
Can you please please any body help me out?
Your help would be really appreciate.
Regards,
Schilukuri
Edited by: Schilukuri on Sep 7, 2010 12:09 PM

Table For Production Order as per MD04

Hi,
I making a report in which i want to take all the open production order as per MD04 transacton, in MD04 when we check the material if there is any open production we can see in MD04, i want to read all those orders from a table i have in AFKO but problem is that it is also showing order which are not present in MD04 even the date of final order confirmation is blank i the table AFKO field GETRI.
regards,
zafar

Check fm MD_STOCK_REQUIREMENTS_LIST_API

Can Reminders in ML sort/order items per dates?

Can Reminders in ML sort/order items per dates? It was possible when it was part of Calendar in its previous incarnation. Doing it manually is a drag (no pun intended). Seeing uncompleted reminders as well as what is imminent, without sifting through the whole list would be very useful.

ops
i mean
about the 1 screenshot
can i have the list
caeram data exit
iptc core
camera raw
file properties
second screeshot
can i have the filter list
aperture value
exosure time
file type
keywords
and so on
thanks

Maximum file size of 2,0 Gb exceeded

Searched all over the place and found one thread with no solutions, so I´ll try again..
I have a project with two mono recordings, each aiff and 530 mb big. Thats 2 hours and 24 minutes. When I try to bounce this in logic 8 (to mp3), I get the message "maximum file size of 2,0 Gb exceeded - please choose a shorter bounce time". ??? If anyone knows how to get around this, pleeaase let me know.
I imported the aiff files to garageband, and garageband had no trouble bouncing it to mp3, so if garageband is able to bounce it, surely logic should be!? The reason I need to bounce it from logic is because of the editing features there, so doesn´t really help that garageband is able to bounce it....also tried importing the mp3 to logic and then bounce, but same problem occured. I´ve also tried turning down the quality to lowest, but doesn´t help. Please help!

Just some thoughts on this...
If the OP is saving to a Mac formatted drive it's not a problem with creating a file on the drive. Might try saving to different location.
It's possible this may is an internal error from Logic and. It probably has little to do with the actual file size as much as it does with the overall length of time of the bounce.
In other words... if Logic sees a certain length of time for a bounce, no matter the file type, it thinks the bounced file will exceed the 2GB file limit, which is leftover programming from earlier version of Mac & PC Logic when both operating systems imposed a 2GB file size restriction.
pancenter-

ALBPM 6.0 : The maximum size for file uploads has been exceeded.

Hi,
I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
An unexpected error ocurred.
The error's technical description is:
"javax.servlet.jsp.JspException: null"
Possible causes are:
The maximum size for file uploads has been exceeded.
If you are trying to publish an exported project you should publish it using the remote project option.
If you are trying to upload the participant's photo you should choose a smaller one.
An internal error has ocurred, please contact support attaching this page's source code.
Has someone resolve it?
Thank's.

Hi,
Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
hth,
Dan

Maximum package size for data packages was exceeded?

Hi Experts,
I am facing this problem "Maximum package size for data packages was exceeded". When I am trying to laod. I even tried to reduce data packet and change DTP settings in EXtraction to Get All New Data Request by Request but still same error is occuring. Can u Plz focus light on this.
Thanks,
Krishna

You can refer to the below OSS note:
Note 1144332 - Consulting note: Message RSBK 250: Package size exceeded
And other related notes: 352038, 417307
Hope this helps.
Murali

DBIF_RSQL_INVALID_RSQL The maximum size of an SQL statement was exceeded

Dear,
I would appreciate a helping hand
I have a problem with a dump I could not find any note that I can help solve the problem.
A dump is appearing at various consultants which indicates the following.
>>> SELECT * FROM KNA1                     "client specified
559                  APPENDING TABLE IKNA1
560                  UP TO RSEUMOD-TBMAXSEL ROWS BYPASSING BUFFER
ST22
What happened?
    Error in the ABAP Application Program
    The current ABAP program "/1BCDWB/DBKNA1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    The SQL statement generated from the SAP Open SQL statement violates a
    restriction imposed by the underlying database system of the ABAP
    system.
    Possible error causes:
     o The maximum size of an SQL statement was exceeded.
     o The statement contains too many input variables.
     o The input data requires more space than is available.
     o ...
    You can generally find details in the system log (SM21) and in the
    developer trace of the relevant work process (ST11).
    In the case of an error, current restrictions are frequently displayed
    in the developer trace.
SQL sentence
550     if not %_l_lines is initial.
551       %_TAB2[] = %_tab2_field[].
552     endif.
553   endif.
554 ENDIF.
555 CASE ACTION.
556   WHEN 'ANZE'.
557 try.
>>> SELECT * FROM KNA1                     "client specified
559                  APPENDING TABLE IKNA1
560                  UP TO RSEUMOD-TBMAXSEL ROWS BYPASSING BUFFER
561    WHERE KUNNR IN I1
562    AND   NAME1 IN I2
563    AND   ANRED IN I3
564    AND   ERDAT IN I4
565    AND   ERNAM IN I5
566    AND   KTOKD IN I6
567    AND   STCD1 IN I7
568    AND   VBUND IN I8
569    AND   J_3GETYP IN I9
570    AND   J_3GAGDUMI IN I10
571    AND   KOKRS IN I11.
572
573   CATCH CX_SY_DYNAMIC_OSQL_SEMANTICS INTO xref.
574     IF xref->kernel_errid = 'SAPSQL_ESCAPE_WITH_POOLTABLE'.
575       message i412(mo).
576       exit.
577     ELSE.
wp trace:
D *** ERROR => dySaveDataBindingValue: Abap-Field= >TEXT-SYS< not found [dypbdatab.c 510]
D *** ERROR => dySaveDataBindingEntry: dySaveDataBindingValue() Rc=-1 Reference= >TEXT-SYS< [dypbdatab.c 430]
D *** ERROR => dySaveDataBinding: dySaveDataBindingEntry() Rc= -1 Reference=>TEXT-SYS< [dypbdatab.c 137]
Y *** ERROR => dyPbSaveDataBindingForField: dySaveDataBinding() Rc= 1 [dypropbag.c 641]
Y *** ERROR => ... Dynpro-Field= >DISPLAY_SY_SUBRC_TEXT< [dypropbag.c 642]
Y *** ERROR => ... Dynpro= >SAPLSTPDA_CARRIER< >0700< [dypropbag.c 643]
D *** ERROR => dySaveDataBindingValue: Abap-Field= >TEXT-SYS< not found [dypbdatab.c 510]
D *** ERROR => dySaveDataBindingEntry: dySaveDataBindingValue() Rc=-1 Reference= >TEXT-SYS< [dypbdatab.c 430]
D *** ERROR => dySaveDataBinding: dySaveDataBindingEntry() Rc= -1 Reference=>TEXT-SYS< [dypbdatab.c 137]
Y *** ERROR => dyPbSaveDataBindingForField: dySaveDataBinding() Rc= 1 [dypropbag.c 641]
Y *** ERROR => ... Dynpro-Field= >DISPLAY_FREE_VAR_TEXT< [dypropbag.c 642]
Y *** ERROR => ... Dynpro= >SAPLSTPDA_CARRIER< >0700< [dypropbag.c 643]
I thank you in advance
If you require other information please request

Hi,
Under certain conditions, an Open SQL statement with range tables can be reformulated into a FOR ALL ENTRIES statement:
    DESCRIBE TABLE range_tab LINES lines.
    IF lines EQ 0.
      [SELECT for blank range_tab]
    ELSE.
      SELECT .. FOR ALL ENTRIES IN range_tab ..
      WHERE .. f EQ range_tab-LOW ...
      ENDSELECT.
    ENDF.
Since FOR ALL ENTRIES statements are automatically converted in accordance with the database restrictions, this solution is always met by means of a choice if the following requirements are fulfilled:
1. The statement operates on transparent tables, on database views or on a projection view on a transparent table.
2. The requirement on the range table is not negated. Moreover, the range table only contains entries with range_tab-SIGN = 'I'
and only one value ever occurs in the field range_tab OPTION.
This value is then used as an operator with operand range_tab-LOW or range_tab-HIGH.In the above example, case 'EQ range_tab-LOW' was the typical case.
3. Duplicates are removed from the result by FOR ALL ENTRIES.This must not falsify the desired result, that is, the previous Open SQL statement can be written as SELECT DISTINCT.
For the reformulation, if the range table is empty it must be handled in a different way:with FOR ALL ENTRIES, all the records would be selected here while this applies for the original query only if the WHERE clause consisted of the 'f IN range_tab' condition.
FOR ALL ENTRIES should also be used if the Open SQL statement contains several range tables.Then (probably) the most extensive of the range tables which fill the second condition is chosen as a FOR ALL ENTRIES table.
OR
What you could do in your code is,
prior to querying;
since your select options parameter is ultimately an internal range table,
1. split the select-option values into a group of say 3000 based on your limit,
2. run your query against each chunck of 3000 parameters,
3. then put together the results of each chunk.
For further reading, you might want to have a look at the Note# 13607 as the first suggestion is what I read from the note.

SAP F&R - Order Proposals not getting generated

Hi Experts,
I am currently on SCM 5.0 system. For a location-product on uploading the consumption data, the forecast gets generated but no Order Proposals are getting generated at all. When I look at the Source of Supply, the delivery dates for the location-product are appropriately displayed.
The scenario is basically Vendor -> DC -> Store i.e. V111 -> R601 -> R611 for the product FR11. The time series of supplying location is displayed for FR11-R611 in CADE while FR11-R601 is not displayed. I suppose, this may be, why the OPs are not getting generated. How do we generate time series for FR11-R601 i.e. for V111 (vendor) ?
Also, When i try to run a location status check on R611, /FRE/FU_CL_FRP_SAFOUT_CRIT comes out with a fatal error with the remaining others in an INITIAL state. How do we resolve this issue.
Thanks & Regards
Prashant

Hi,
I was able to solve both the issues with a change in the Forecasting Frequency profiles where the reference day for start week was on "FRP Location Activation Date". I changed it to Calendar date and checked the forecast and it worked with the Order proposals also generating. Also, the location status check out for the mentioned location was in "OK" state.
Also, a second methodology applied to overcome the problem was to go to SAP Menu -> F&R Processor -> Administration, from there go to the location tab where the locations had a deactivation date of 31.12.2009. I extended the date and then there was no need to change the forecasting frequency profiles.
Regards
Prashant
Edited by: Prashant Kedare on Mar 3, 2010 9:38 AM

Maximum no. of order proposals per deadline exceeded

Similar Messages

Maybe you are looking for