Maximum Number of ListPartitions on a Table.
Hi All,
I am having a table say here EMP_HISTORY which is going to have 1 Billion records.
ORACLE Version: 10gR2.
The table structure will be as given below.
EMP_HIST_ID NUMBER,
EMPNO NUMBER,
ENAME VARCHAR2(4000),
PREV_SAL NUMBER,
PREV_DEPTNO NUMBER,
PREV_COMM NUMBER
This historical table will have Millions of records and it will be inserting all the historical information of the employee information changes that are done on the EMP table.
Note: In My case the EMP table is having EMPNO as primary key and there are around 1000 UNIQUE employee NUMBERS.
I want to build reports basing upon this EMP_HISTORY table and I want to query the data for EMPNO.
In this case If I query on the EMPNO on the EMP_HISTORY table it is taking lots of time.
I am planning to do LIST Partition on this table and create 1000 list partitions on this Single EMP_HISTORY table.
Is it a good approach to create 1000 list partitions and add new partitions whenever new EMPNO are added to this history table.
OR Is there any OTHER Partition I can go for.
FYI: I am giving EMP_HISTORY table as an example. Our History table is also having the same structure.
FYI: I am just a developer and in our team we don't have any DB Designer and we are trying to do it by ourselves.
Appreciate your response on this.
Thanks,
Madhu K.
569725 wrote:
Hi All,
I am having a table say here EMP_HISTORY which is going to have 1 Billion records.
ORACLE Version: 10gR2.
The table structure will be as given below.
EMP_HIST_ID NUMBER,
EMPNO NUMBER,
ENAME VARCHAR2(4000),
PREV_SAL NUMBER,
PREV_DEPTNO NUMBER,
PREV_COMM NUMBER
This historical table will have Millions of records and it will be inserting all the historical information of the employee information changes that are done on the EMP table.
Note: In My case the EMP table is having EMPNO as primary key and there are around 1000 UNIQUE employee NUMBERS.
I want to build reports basing upon this EMP_HISTORY table and I want to query the data for EMPNO.
In principle, the most effective strategy for addressing your requirements (or, at least, the ones you've described) in 10g is to create a list-partitioned index organized table with compression on the EMPNO.
I note that your table doesn't have a change timestamp, however, so I assume you are using a sequence generator to create the emp_hist_id. If this is the case you should make the (empno, emp_hist_id) the primary key of the IOT.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan
Similar Messages
-
ORA 01792 maximum number of columns in a table or view is 1000
Hello every1, I wish to register a large xmlschema doc, I am using the command
begin
dbms_xmlschema.registerschema(
schemaurl=>'xxxx',
schemadoc=>bfilename('XMLDIR','xxxxxx.xsd'),
csid=>nls_charset_id('AL32UTF8'));
end;
But the schema file exists 1000 col and it gives me the error msg of
ORA-01792: maximum number of columns in a table or view is 1000
is there anyway to solve the problems without edit the original schema document?
Thanks for your helpFirst create this package
create or replace package XDB_ANALYZE_XMLSCHEMA_10200
authid CURRENT_USER
as
function analyzeStorageModel(P_COMPLEX_TYPE_NAME VARCHAR2) return XMLTYPE;
function analyzeComplexType(COMPLEX_TYPE VARCHAR2) return XMLTYPE;
procedure renameCollectionTable (XMLTABLE varchar2, XPATH varchar2, COLLECTION_TABLE_PREFIX varchar2);
function printNestedTables(XML_TABLE varchar2) return XMLType;
function getComplexTypeElementList(P_SQLTYPE VARCHAR2, P_SQLSCHEMA VARCHAR2) return XDB.XDB$XMLTYPE_REF_LIST_T;
procedure scopeXMLReferences;
procedure indexXMLReferences(INDEX_NAME VARCHAR2);
function generateSchemaFromTable(P_TABLE_NAME varchar2, P_OWNER varchar2 default USER) return XMLTYPE;
function showSQLTypes(schemaFolder varchar2) return XMLType;
function generateCreateTableStatement(XML_TABLE_NAME varchar2, NEW_TABLE_NAME varchar2) return CLOB;
end XDB_ANALYZE_XMLSCHEMA_10200;
show errors
create or replace package body XDB_ANALYZE_XMLSCHEMA_10200
as
G_DEPTH_COUNT NUMBER(2) := 0;
TYPE BASETYPE_T is RECORD
SUBTYPE varchar2(128),
SUBTYPE_OWNER varchar2(32),
BASETYPE varchar2(128),
BASETYPE_OWNER varchar2(32)
TYPE BASETYPE_LIST_T IS TABLE OF BASETYPE_T;
BASETYPE_LIST BASETYPE_LIST_T := BASETYPE_LIST_T();
function findStorageModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2, P_INCLUDE_SUBTYPES VARCHAR2 DEFAULT 'YES') return XMLType;
function getLocalAttributes(P_TYPE_NAME varchar2, P_TYPE_OWNER VARCHAR2) return XMLType;
function makeElement(P_NAME varchar2)
return xmltype
as
V_NAME varchar2(4000) := P_NAME;
begin
-- -- dbms_output.put_line('Processing : ' || P_NAME);
if (P_NAME LIKE '%$') then
V_NAME := SUBSTR(V_NAME,1,LENGTH(V_NAME) - 1);
end if;
if (P_NAME LIKE '%$%') then
V_NAME := REPLACE(V_NAME,'$','_0x22_');
end if;
return XMLTYPE( '<' || V_NAME || '/>');
end;
function getPathToRoot(SUBTYPE VARCHAR2, SUBTYPE_OWNER VARCHAR2)
return varchar2
as
TYPE_HIERARCHY varchar2(4000);
begin
SELECT sys_connect_by_path( OWNER || '.' || TYPE_NAME , '/')
INTO TYPE_HIERARCHY
FROM ALL_TYPES
WHERE TYPE_NAME = SUBTYPE
AND OWNER = SUBTYPE_OWNER
CONNECT BY SUPERTYPE_NAME = PRIOR TYPE_NAME
AND SUPERTYPE_OWNER = PRIOR OWNER
START WITH SUPERTYPE_NAME IS NULL
AND SUPERTYPE_OWNER IS NULL;
return TYPE_HIERARCHY;
end;
function expandSQLType(ATTR_NAME VARCHAR2, SUBTYPE VARCHAR2, SUBTYPE_OWNER VARCHAR2)
return XMLType
as
STORAGE_MODEL XMLTYPE;
ATTRIBUTES XMLTYPE;
EXTENDED_TYPE XMLTYPE;
ATTR_COUNT NUMBER := 0;
CURSOR FIND_EXTENDED_TYPES
is
select TYPE_NAME, OWNER
from ALL_TYPES
where SUPERTYPE_NAME = SUBTYPE
and SUPERTYPE_OWNER = SUBTYPE_OWNER;
begin
-- dbms_output.put_line('Processing SQLType : "' || SUBTYPE_OWNER || '.' || SUBTYPE || '".' );
STORAGE_MODEL := makeElement(ATTR_NAME);
select insertChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),'@type',SUBTYPE)
into STORAGE_MODEL
from dual;
select insertChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),'@typeOwner',SUBTYPE_OWNER)
into STORAGE_MODEL
from dual;
ATTRIBUTES := getLocalAttributes(SUBTYPE, SUBTYPE_OWNER);
ATTR_COUNT := ATTR_COUNT + ATTRIBUTES.extract('/' || ATTRIBUTES.getRootElement() || '/@columns').getNumberVal();
select appendChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),ATTRIBUTES)
into STORAGE_MODEL
from DUAL;
for t in FIND_EXTENDED_TYPES loop
EXTENDED_TYPE := expandSQLType('ExtendedType',T.TYPE_NAME,T.OWNER);
ATTR_COUNT := ATTR_COUNT + EXTENDED_TYPE.extract('/' || EXTENDED_TYPE.getRootElement() || '/@columns').getNumberVal();
select appendChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),EXTENDED_TYPE)
into STORAGE_MODEL
from DUAL;
end loop;
select insertChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),'@columns',ATTR_COUNT)
into STORAGE_MODEL
from dual;
return STORAGE_MODEL;
end;
function getLocalAttributes(P_TYPE_NAME varchar2, P_TYPE_OWNER VARCHAR2)
return XMLType
as
V_ATTRIBUTE_COUNT NUMBER := 0;
V_TOTAL_ATTRIBUTES NUMBER := 0;
V_TEMP_RESULT NUMBER;
V_COLLECTION_TYPE varchar2(32);
V_COLLECTION_OWNER varchar2(32);
CURSOR FIND_CHILD_ATTRS
is
select ATTR_NAME, ATTR_TYPE_OWNER, ATTR_TYPE_NAME, INHERITED
from ALL_TYPE_ATTRS
where TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER
and INHERITED = 'NO'
order by ATTR_NO;
V_ATTR DBMS_XMLDOM.DOMATTR;
V_ATTRIBUTE_LIST XMLTYPE;
V_ATTRIBUTE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE XMLTYPE;
V_ATTRIBUTE_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_ROOT DBMS_XMLDOM.DOMELEMENT;
V_TYPE_DEFINITION XMLTYPE;
V_TYPE_DEFINITION_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_TYPE_DEFINITION_ROOT DBMS_XMLDOM.DOMELEMENT;
begin
V_ATTRIBUTE_LIST := makeElement('Attributes');
V_ATTRIBUTE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE_LIST);
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_LIST_DOCUMENT);
for ATTR in FIND_CHILD_ATTRS loop
-- Finding Element / Attribute Name could be tricky. Use SQLName
V_ATTRIBUTE := makeElement(ATTR.ATTR_NAME);
V_ATTRIBUTE_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE);
V_ATTRIBUTE_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_DOCUMENT);
begin
-- Check for Attributes based on collection types, With Nested Table storage each Collection will cost 2 columns.
select ELEM_TYPE_NAME, ELEM_TYPE_OWNER
into V_COLLECTION_TYPE, V_COLLECTION_OWNER
from ALL_COLL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
-- -- dbms_output.put_line('Adding "' || ATTR.ATTR_NAME || '". Collection of "' || ATTR.ATTR_TYPE_OWNER || '"."' || ATTR.ATTR_TYPE_NAME || '".');
-- Attribute is a Collection Type.
-- Collection will be managed as a NESTED TABLE
-- Each Collection cost 2 columns.
-- May want to count the number of columns in the NESTED_TABLE at a later date.
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLCollType');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLCollTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COLLECTION_TYPE);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COLLECTION_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,2);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
exception
when no_data_found then
-- Attribute is not a collection type.
begin
-- Check for Attributes based on non-scalar types.
select 1
into V_TEMP_RESULT
from ALL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
-- Attribute is based on a non-scalar type. Find the Storage Model for this type.
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_TYPE_DEFINITION := findStorageModel(ATTR.ATTR_TYPE_NAME, ATTR.ATTR_TYPE_OWNER, 'YES');
V_TYPE_DEFINITION_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_TYPE_DEFINITION);
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_TYPE_DEFINITION_DOCUMENT);
V_ATTRIBUTE_COUNT := DBMS_XMLDOM.GETATTRIBUTE(V_TYPE_DEFINITION_ROOT,'columns');
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_ATTRIBUTE_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),TRUE));
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_ROOT),DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_TYPE_DEFINITION_DOCUMENT);
if (ATTR.ATTR_TYPE_NAME = 'XDB$ENUM_T' and ATTR.ATTR_TYPE_OWNER = 'XDB') then
-- The cost of a XDB$ENUM_T is 2 columns
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,2);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
else
-- The cost of a non scalar Type is the number of attributes plus one for Type and one for the TYPEID.
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_ATTRIBUTE_COUNT + 2);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
end if;
exception
when no_data_found then
-- Attribute is based on a scalar type
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,1);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
end;
end;
V_TOTAL_ATTRIBUTES := V_TOTAL_ATTRIBUTES + DBMS_XMLDOM.GETATTRIBUTE(V_ATTRIBUTE_ROOT,'columns');
V_ATTRIBUTE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_ATTRIBUTE_LIST_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_ROOT),TRUE));
V_ATTRIBUTE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT),DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_ATTRIBUTE_DOCUMENT);
if (V_TOTAL_ATTRIBUTES > 25000) then
exit;
end if;
end loop;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_LIST_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_TOTAL_ATTRIBUTES);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_LIST_ROOT,V_ATTR);
return V_ATTRIBUTE_LIST;
end;
function getSubTypes(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2)
return XMLType
as
CURSOR FIND_SUBTYPES
is
select TYPE_NAME, OWNER
from ALL_TYPES
where SUPERTYPE_NAME = P_TYPE_NAME
and SUPERTYPE_OWNER = P_TYPE_OWNER;
CURSOR FIND_SUBTYPE_HEIRARCHY
is
select LEVEL, TYPE_NAME, OWNER
from ALL_TYPES
where TYPE_NAME <> P_TYPE_NAME
and OWNER <> P_TYPE_OWNER
connect by SUPERTYPE_NAME = PRIOR TYPE_NAME
and SUPERTYPE_OWNER = PRIOR OWNER
start with TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER;
V_SUBTYPE_LIST XMLType;
V_SUBTYPE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUBTYPE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
V_TYPE_DEFINITION XMLType;
V_TYPE_DEFINITION_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_TYPE_DEFINITION_ROOT DBMS_XMLDOM.DOMELEMENT;
V_SUBTYPE_DEFINITIONS XMLType;
V_SUBTYPE_DEFINITIONS_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUBTYPE_DEFINITIONS_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE_LIST XMLType;
V_ATTRIBUTE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
V_SUBTYPES_EXIST BOOLEAN := FALSE;
V_TOTAL_columns number;
V_ATTRIBUTE_COUNT number;
V_ATTR DBMS_XMLDOM.DOMATTR;
V_COMPLEX_TYPE VARCHAR2(256);
begin
V_SUBTYPE_LIST := makeElement('SubTypeDefinitions');
V_SUBTYPE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUBTYPE_LIST);
V_SUBTYPE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUBTYPE_LIST_DOCUMENT);
V_TOTAL_columns := 0;
for t in FIND_SUBTYPES() loop
V_SUBTYPES_EXIST := TRUE;
V_TYPE_DEFINITION := makeElement(t.TYPE_NAME);
V_TYPE_DEFINITION_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_TYPE_DEFINITION);
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_TYPE_DEFINITION_DOCUMENT);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_TYPE_DEFINITION_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,t.OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_TYPE_DEFINITION_ROOT,V_ATTR);
begin
select x.XMLDATA.NAME
into V_COMPLEX_TYPE
from XDB.XDB$COMPLEX_TYPE x
where x.XMLDATA.SQLTYPE = t.TYPE_NAME
and x.XMLDATA.SQLSCHEMA = t.OWNER;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_TYPE_DEFINITION_DOCUMENT,'type');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COMPLEX_TYPE);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_TYPE_DEFINITION_ROOT,V_ATTR);
-- Consider adding Schema URL Attribute
exception
when no_data_found then
null;
when others then
raise;
end;
V_ATTRIBUTE_LIST := getLocalAttributes(t.TYPE_NAME, t.OWNER);
V_ATTRIBUTE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE_LIST);
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_LIST_DOCUMENT);
V_ATTRIBUTE_COUNT := DBMS_XMLDOM.GETATTRIBUTE(V_ATTRIBUTE_LIST_ROOT,'columns');
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_TYPE_DEFINITION_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT),TRUE));
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_ATTRIBUTE_LIST_DOCUMENT);
V_SUBTYPE_DEFINITIONS := getSubTypes(t.TYPE_NAME,t.OWNER);
if (V_SUBTYPE_DEFINITIONS is not NULL) then
V_SUBTYPE_DEFINITIONS_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUBTYPE_DEFINITIONS);
V_SUBTYPE_DEFINITIONS_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUBTYPE_DEFINITIONS_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_SUBTYPE_DEFINITIONS_ROOT,'columns');
V_SUBTYPE_DEFINITIONS_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_TYPE_DEFINITION_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_SUBTYPE_DEFINITIONS_ROOT),TRUE));
V_SUBTYPE_DEFINITIONS_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),DBMS_XMLDOM.MAKENODE(V_SUBTYPE_DEFINITIONS_ROOT)));
end if;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_TYPE_DEFINITION_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_ATTRIBUTE_COUNT);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_TYPE_DEFINITION_ROOT,V_ATTR);
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_SUBTYPE_LIST_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),TRUE));
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_SUBTYPE_LIST_ROOT),DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT)));
V_TOTAL_columns := V_TOTAL_columns + V_ATTRIBUTE_COUNT;
end loop;
if (V_SUBTYPES_EXIST) then
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_SUBTYPE_LIST_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_TOTAL_columns);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_SUBTYPE_LIST_ROOT,V_ATTR);
return V_SUBTYPE_LIST;
else
return NULL;
end if;
end;
function findSuperTypeModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2)
return XMLType
as
begin
-- dbms_output.put_line('Processing Super Type : "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '"');
return findStorageModel(P_TYPE_NAME, P_TYPE_OWNER,'NO');
end;
function getStorageModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2, P_INCLUDE_SUBTYPES VARCHAR2 DEFAULT 'YES')
return XMLType
as
V_TYPE_DEFINITION XMLTYPE;
V_ATTRIBUTE_COUNT NUMBER := 0;
SUBTYPE_STORAGE_MODEL XMLTYPE;
V_SUPERTYPE_DEFINITION XMLTYPE;
V_SUPERTYPE_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUPERTYPE_ROOT DBMS_XMLDOM.DOMELEMENT;
V_SUBTYPE_DEFINITION XMLTYPE;
V_SUBTYPE_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUBTYPE_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE_LIST XMLTYPE;
V_ATTRIBUTE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
cursor FIND_SUPERTYPE_HEIRARCHY
is
select TYPE_NAME, OWNER
from ALL_TYPES
where TYPE_NAME <> P_TYPE_NAME
and OWNER <> P_TYPE_OWNER
connect by TYPE_NAME = PRIOR SUPERTYPE_NAME
and OWNER = PRIOR SUPERTYPE_OWNER
start with TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER
order by LEVEL;
V_COMPLEX_TYPE varchar2(256);
V_SUPERTYPE_NAME varchar2(256);
v_SUPERTYPE_OWNER varchar2(256);
V_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTR DBMS_XMLDOM.DOMATTR;
begin
-- dbms_output.put_line('Generating Storage Model for : "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '"');
V_TYPE_DEFINITION := makeElement(P_TYPE_NAME);
V_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_TYPE_DEFINITION);
V_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_DOCUMENT);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,P_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
begin
select x.XMLDATA.NAME
into V_COMPLEX_TYPE
from XDB.XDB$COMPLEX_TYPE x
where x.XMLDATA.SQLTYPE = P_TYPE_NAME
and x.XMLDATA.SQLSCHEMA = P_TYPE_OWNER;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'type');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COMPLEX_TYPE);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
-- Consider adding Schema URL Attribute
exception
when no_data_found then
null;
when others then
raise;
end;
select SUPERTYPE_NAME, SUPERTYPE_OWNER
into V_SUPERTYPE_NAME, V_SUPERTYPE_OWNER
from ALL_TYPES
where TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER;
-- Process SuperType.
if (V_SUPERTYPE_NAME is not null) then
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLParentType');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_SUPERTYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLParentTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_SUPERTYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
-- Find the Definition for the super type. Do not include the definition of it's subtypes.
V_SUPERTYPE_DEFINITION := findSuperTypeModel(V_SUPERTYPE_NAME, V_SUPERTYPE_OWNER);
-- -- dbms_output.put_line(dbms_lob.substr(V_SUPERTYPE_DEFINITION.getClobVal(),1000,1));
V_SUPERTYPE_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUPERTYPE_DEFINITION);
V_SUPERTYPE_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUPERTYPE_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_SUPERTYPE_ROOT,'columns');
V_SUPERTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_SUPERTYPE_ROOT),TRUE));
V_SUPERTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_SUPERTYPE_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_SUPERTYPE_DOCUMENT);
end if;
-- Process Attributes defined directly by the Type.
V_ATTRIBUTE_LIST := getLocalAttributes(P_TYPE_NAME, P_TYPE_OWNER);
V_ATTRIBUTE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE_LIST);
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_LIST_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_ATTRIBUTE_LIST_ROOT,'columns');
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT),TRUE));
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_ATTRIBUTE_LIST_DOCUMENT);
if (P_INCLUDE_SUBTYPES = 'YES') then
-- Process any Sub-Types...
V_SUBTYPE_DEFINITION := getSubTypes(P_TYPE_NAME, P_TYPE_OWNER);
if (V_SUBTYPE_DEFINITION is not null) then
V_SUBTYPE_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUBTYPE_DEFINITION);
V_SUBTYPE_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUBTYPE_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_SUBTYPE_ROOT,'columns');
V_SUBTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_SUBTYPE_ROOT),TRUE));
V_SUBTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_SUBTYPE_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_SUBTYPE_DOCUMENT);
end if;
end if;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_ATTRIBUTE_COUNT);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
-- Cache the type definition.
-- dbms_output.put_line('Cached Storage Model for "' || P_TYPE_OWNER || '.' || P_TYPE_NAME || '".');
insert into XDBPM.XDBPM_STORAGE_MODEL_CACHE (TYPE_NAME, TYPE_OWNER, EXTENDED_DEFINITION, STORAGE_MODEL) VALUES (P_TYPE_NAME, P_TYPE_OWNER, P_INCLUDE_SUBTYPES, V_TYPE_DEFINITION);
return V_TYPE_DEFINITION;
end;
function findStorageModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2, P_INCLUDE_SUBTYPES VARCHAR2 DEFAULT 'YES')
-- Find the Storage Model for the Base Type.
-- If the type is derived from another type we need the storage model of the Base Type
-- As storage models are calculated they are cached in the global temporary table XDBPM_STORAGE_MODEL_CACHE. This makes
-- the process much more efficient. A global temporary table is used to minimize memory usage.
return XMLType
as
V_STORAGE_MODEL XMLType;
V_STORAGE_MODEL_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_STORAGE_MODEL_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE_COUNT VARCHAR2(10);
begin
dbms_output.put_line('findStorageModel(' || G_DEPTH_COUNT || ') : Processing "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '".' );
begin
SELECT STORAGE_MODEL
into V_STORAGE_MODEL
from XDBPM.XDBPM_STORAGE_MODEL_CACHE
where TYPE_NAME = P_TYPE_NAME
and TYPE_OWNER = P_TYPE_OWNER
and EXTENDED_DEFINITION = P_INCLUDE_SUBTYPES;
-- dbms_output.put_line('Resolved Storage Model from cache.');
exception
when no_data_found then
G_DEPTH_COUNT := G_DEPTH_COUNT + 1;
V_STORAGE_MODEL := getStorageModel(P_TYPE_NAME,P_TYPE_OWNER, P_INCLUDE_SUBTYPES);
G_DEPTH_COUNT := G_DEPTH_COUNT - 1;
when others then
raise;
end;
V_STORAGE_MODEL_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_STORAGE_MODEL);
V_STORAGE_MODEL_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_STORAGE_MODEL_DOCUMENT);
V_ATTRIBUTE_COUNT := DBMS_XMLDOM.GETATTRIBUTE(V_STORAGE_MODEL_ROOT,'columns');
dbms_output.put_line('findStorageModel : Attribute Count for "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '" = ' || V_ATTRIBUTE_COUNT || '.' );
return V_STORAGE_MODEL;
end;
function analyzeStorageModel(P_COMPLEX_TYPE_NAME VARCHAR2, P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2)
-- Generate a map showing the number of columns required to persist an instance of the SQL type.
return XMLType
as
V_STORAGE_MODEL XMLTYPE;
V_COUNT NUMBER := 0;
V_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTR DBMS_XMLDOM.DOMATTR;
V_MODEL DBMS_XMLDOM.DOMELEMENT;
V_TYPE_DEFINITION DBMS_XMLDOM.DOMELEMENT;
begin
V_STORAGE_MODEL := makeElement(P_COMPLEX_TYPE_NAME);
V_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_STORAGE_MODEL);
V_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_DOCUMENT);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,P_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,P_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
V_TYPE_DEFINITION := DBMS_XMLDOM.GETDOCUMENTELEMENT(DBMS_XMLDOM.NEWDOMDOCUMENT(findStorageModel(P_TYPE_NAME, P_TYPE_OWNER, 'YES')));
V_TYPE_DEFINITION := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION),TRUE));
V_TYPE_DEFINITION := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION)));
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,DBMS_XMLDOM.GETATTRIBUTE(V_TYPE_DEFINITION,'columns'));
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
return V_STORAGE_MODEL;
end;
function analyzeStorageModel(P_COMPLEX_TYPE_NAME VARCHAR2)
return XMLTYPE
-- Generate a map showing the number of columns required to persist an instance of the complex type.
as
pragma autonomous_transaction;
V_SQLTYPE VARCHAR2(128);
V_SQLSCHEMA VARCHAR2(32);
V_RESULT XMLType;
begin
G_DEPTH_COUNT := 0;
select ct.XMLDATA.SQLTYPE, ct.XMLDATA.SQLSCHEMA
into V_SQLTYPE, V_SQLSCHEMA
from XDB.XDB$COMPLEX_TYPE ct, XDB.XDB$SCHEMA s
where ct.XMLDATA.NAME = P_COMPLEX_TYPE_NAME
and ref(s) = ct.XMLDATA.PARENT_SCHEMA
and s.XMLDATA.SCHEMA_OWNER = USER;
delete from XDBPM.XDBPM_STORAGE_MODEL_CACHE;
-- delete from XDBPM.XDBPM_STORAGE_MODEL;
V_RESULT := analyzeStorageModel(P_COMPLEX_TYPE_NAME,V_SQLTYPE,V_SQLSCHEMA);
COMMIT;
return V_RESULT;
exception
when no_data_found then
-- dbms_output.put_line('Unable to find SQLType mapping for complexType : "' || USER || '"."' || P_COMPLEX_TYPE_NAME || '".' );
return null;
when others then
raise;
end;
function analyzeSQLType(ATTR_NAME VARCHAR2, TARGET_TYPE_NAME VARCHAR2, TARGET_TYPE_OWNER VARCHAR2)
return XMLType
as
ROOT_NODE_NAME VARCHAR2(128);
ATTR_DETAIL XMLTYPE;
XPATH_EXPRESSION VARCHAR2(129);
CURSOR FIND_CHILD_ATTRS is
select ATTR_NAME, ATTR_TYPE_OWNER, ATTR_TYPE_NAME, INHERITED
from ALL_TYPE_ATTRS
where OWNER = TARGET_TYPE_OWNER
and TYPE_NAME = TARGET_TYPE_NAME
order by ATTR_NO;
CHILD_ATTR XMLTYPE;
ATTR_COUNT NUMBER := 0;
TEMP number;
COLLECTION_TYPE_NAME varchar2(256);
COLLECTION_TYPE_OWNER varchar2(256);
begin
-- -- dbms_output.put_line('Processing Attribute ' || ATTR_NAME || ' of ' || TARGET_TYPE_OWNER || '.' || TARGET_TYPE_NAME );
ATTR_DETAIL := makeElement(ATTR_NAME);
XPATH_EXPRESSION := '/' || ATTR_DETAIL.GETROOTELEMENT();
for ATTR in FIND_CHILD_ATTRS loop
begin
select ELEM_TYPE_NAME, ELEM_TYPE_OWNER
into COLLECTION_TYPE_NAME, COLLECTION_TYPE_OWNER
from ALL_COLL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
CHILD_ATTR := analyzeSQLType(ATTR.ATTR_NAME, COLLECTION_TYPE_NAME, COLLECTION_TYPE_OWNER );
ATTR_COUNT := ATTR_COUNT + CHILD_ATTR.extract('/' || CHILD_ATTR.GETROOTELEMENT() || '/@sqlAttrs').getNumberVal();
select appendChildXML(ATTR_DETAIL,XPATH_EXPRESSION,CHILD_ATTR)
into ATTR_DETAIL
from DUAL;
exception
when no_data_found then
begin
select 1
into TEMP
from ALL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
CHILD_ATTR := analyzeSQLType(ATTR.ATTR_NAME, ATTR.ATTR_TYPE_NAME, ATTR.ATTR_TYPE_OWNER );
ATTR_COUNT := ATTR_COUNT + CHILD_ATTR.extract('/' || CHILD_ATTR.GETROOTELEMENT() || '/@sqlAttrs').getNumberVal();
select appendChildXML(ATTR_DETAIL,XPATH_EXPRESSION,CHILD_ATTR)
into ATTR_DETAIL
from DUAL;
exception
when no_data_found then
ATTR_COUNT := ATTR_COUNT + 1;
end;
end;
end loop;
select insertChildXML(ATTR_DETAIL,XPATH_EXPRESSION,'@sqlAttrs',ATTR_COUNT)
into ATTR_DETAIL
from dual;
return ATTR_DETAIL;
end;
function analyzeComplexType(COMPLEX_TYPE VARCHAR2)
return XMLType
as
RESULT xmltype;
SQLTYPE varchar2(128);
SQLTYPE_OWNER varchar2(32);
begin
select SQLTYPE, SQLTYPE_OWNER
into SQLTYPE, SQLTYPE_OWNER
from USER_XML_SCHEMAS,
xmlTable
xmlnamespaces
'http://www.w3.org/2001/XMLSchema' as "xsd",
'http://xmlns.oracle.com/xdb' as "xdb"
'/xsd:schema/xsd:complexType'
passing Schema
columns
COMPLEX_TYPE_NAME varchar2(4000) path '@name',
SQLTYPE varchar2(128) path '@xdb:SQLType',
SQLTYPE_OWNER varchar2(32) path '@xdb:SQLSchema'
where COMPLEX_TYPE_NAME = COMPLEX_TYPE;
result := analyzeSQLType(COMPLEX_TYPE,SQLTYPE,SQLTYPE_OWNER);
select insertChildXML(RESULT,'/' || COMPLEX_TYPE,'@SQLType',SQLTYPE)
into result
from dual;
return result;
end;
function showSQLTypes(schemaFolder varchar2) return XMLType
is
xmlSchema XMLTYPE;
begin
select xmlElement
"TypeList",
xmlAgg
xmlElement
"Schema",
xmlElement
"ResourceName",
extractValue(res,'/Resource/DisplayName')
xmlElement
"complexTypes",
select xmlAgg
xmlElement
"complexType",
xmlElement
"name",
extractValue(value(XML),'/xsd:complexType/@name',XDB_NAMESPACES.XDBSCHEMA_PREFIXES)
xmlElement
"SQLType",
extractValue(value(XML),'/xsd:complexType/@xdb:SQLType',XDB_NAMESPACES.XDBSCHEMA_PREFIXES)
from table
xmlsequence
extract
xdburitype(p.path).getXML(),
'/xsd:schema/xsd:complexType',
XDB_NAMESPACES.XDBSCHEMA_PREFIXES
) xml
-- order by extractValue(value(XML),'/xsd:complexType/@name',XDB_NAMESPACES.XDBSCHEMA_PREFIXES)
).extract('/*')
into xmlSchema
from path_view p
where under_path(res,schemaFolder) = 1
order by extractValue(res,'/Resource/DisplayName');
return xmlSchema;
end;
procedure renameCollectionTable (XMLTABLE varchar2, XPATH varchar2, COLLECTION_TABLE_PREFIX varchar2)
as
SYSTEM_GENERATED_NAME varchar2(256);
COLLECTION_TABLE_NAME varchar2(256);
CLUSTERED_INDEX_NAME varchar2(256);
PARENT_INDEX_NAME varchar2(256);
RENAME_STATEMENT varchar2(4000);
begin
COLLECTION_TABLE_NAME := COLLECTION_TABLE_PREFIX || '_TABLE';
CLUSTERED_INDEX_NAME := COLLECTION_TABLE_PREFIX || '_DATA';
PARENT_INDEX_NAME := COLLECTION_TABLE_PREFIX || '_LIST';
select TABLE_NAME
into SYSTEM_GENERATED_NAME
from ALL_NESTED_TABLES
where PARENT_TABLE_NAME = XMLTABLE
and PARENT_TABLE_COLUMN = XPATH
and OWNER = USER;
RENAME_STATEMENT := 'alter table ' || USER || '."' || SYSTEM_GENERATED_NAME || '" rename to "' ||COLLECTION_TABLE_NAME || '"';
-- -- dbms_output.put_line(RENAME_STATEMENT);
execute immediate RENAME_STATEMENT;
begin
select INDEX_NAME
into SYSTEM_GENERATED_NAME
from ALL_INDEXES
where TABLE_NAME = COLLECTION_TABLE_NAME
and INDEX_TYPE = 'IOT - TOP'
and OWNER = USER;
RENAME_STATEMENT := 'alter index ' || USER || '."' || SYSTEM_GENERATED_NAME || '" rename to "' || CLUSTERED_INDEX_NAME || '"';
-- -- dbms_output.put_line(RENAME_STATEMENT);
execute immediate RENAME_STATEMENT;
exception
when NO_DATA_FOUND then
null;
end;
begin
select INDEX_NAME
into SYSTEM_GENERATED_NAME
from ALL_IND_columns
where COLUMN_NAME = XPATH
and TABLE_NAME = XMLTABLE
and TABLE_OWNER = USER;
RENAME_STATEMENT := 'alter index ' || USER || '."' || SYSTEM_GENERATED_NAME || '" rename to "' || PARENT_INDEX_NAME || '"';
-- -- dbms_output.put_line(RENAME_STATEMENT);
execute immediate RENAME_STATEMENT;
exception
when NO_DATA_FOUND then
null;
end;
end;
function processNestedTable(currentLevel in out number, currentNode in out XMLType, query SYS_REFCURSOR)
return XMLType
is
thisLevel number;
thisNode xmlType;
result xmlType;
begin
thisLevel := currentLevel;
thisNode := currentNode;
fetch query into currentLevel, currentNode;
if (query%NOTFOUND) then
currentLevel := -1;
end if;
while (currentLevel >= thisLevel) loop
-- Next Node is a decendant of sibling of this Node.
if (currentLevel > thisLevel) then
-- Next Node is a decendant of this Node.
result := processNestedTable(currentLevel, currentNode, query);
select xmlElement
"Collection",
extract(thisNode,'/Collection/*'),
xmlElement
"NestedCollections",
result
into thisNode
from dual;
else
-- Next node is a sibling of this Node.
result := processNestedTable(currentLevel, currentNode, query);
select xmlconcat(thisNode,result) into thisNode from dual;
end if;
end loop;
-- Next Node is a sibling of some ancestor of this node.
return thisNode;
end;
function printNestedTables(XML_TABLE varchar2)
return XMLType
is
query SYS_REFCURSOR;
result XMLType;
rootLevel number := 0;
rootNode xmlType;
begin
open query for
select level, xmlElement
"Collection",
xmlElement
"CollectionId",
PARENT_TABLE_COLUMN
) as XML
from USER_NESTED_TABLES
connect by PRIOR TABLE_NAME = PARENT_TABLE_NAME
start with PARENT_TABLE_NAME = XML_TABLE;
fetch query into rootLevel, rootNode;
result := processNestedTable(rootLevel, rootNode, query);
select xmlElement
"NestedTableStructure",
result
into result
from dual;
return result;
end;
function generateSchemaFromTable(P_TABLE_NAME varchar2, P_OWNER varchar2 default USER)
return XMLTYPE
as
xmlSchema XMLTYPE;
begin
select xmlElement
"xsd:schema",
xmlAttributes
'http://www.w3.org/2001/XMLSchema' as "xmlns:xsd",
'http://xmlns.oracle.com/xdb' as "xmlns:xdb"
xmlElement
"xsd:element",
xmlAttributes
'ROWSET' as "name",
'rowset' as "type"
xmlElement
"xsd:complexType",
xmlAttributes
'rowset' as "name"
xmlElement
"xsd:sequence",
xmlElement
"xsd:element",
xmlAttributes
'ROW' as "name",
table_name || '_T' as "type",
'unbounded' as "maxOccurs"
xmlElement
"xsd:complexType",
xmlAttributes
table_name || '_T' as "name"
xmlElement
"xsd:sequence",
xmlAgg(ELEMENT order by INTERNAL_COLUMN_ID)
into xmlSchema
from (select TABLE_NAME, INTERNAL_COLUMN_ID,
case
when DATA_TYPE in ('VARCHAR2','CHAR') then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
xmlElement
"xsd:simpleType",
xmlElement
"xsd:restriction",
xmlAttributes
'xsd:string' as "base"
xmlElement
"xsd:maxLength",
xmlAttributes
DATA_LENGTH as "value"
when DATA_TYPE = 'NUMBER' then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
xmlElement
"xsd:simpleType",
xmlElement
"xsd:restriction",
xmlAttributes
decode(DATA_SCALE, 0, 'xsd:integer', 'xsd:double') as "base"
xmlElement
"xsd:totalDigits",
xmlAttributes
DATA_PRECISION as "value"
when DATA_TYPE = 'DATE' then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
'xsd:date' as "type",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
when DATA_TYPE like 'TIMESTAMP%WITH TIME ZONE' then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
'xsd:dateTime' as "type",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
else
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
'xsd:anySimpleType' as "type",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
end ELEMENT
from all_tab_cols c
where c.TABLE_NAME = P_TABLE_NAME
and c.OWNER = P_OWNER
group by TABLE_NAME;
return xmlSchema;
end;
function appendElementList(V_ELEMENT_LIST IN OUT XDB.XDB$XMLTYPE_REF_LIST_T, V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandModel(P_MODEL XDB.XDB$MODEL_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandChoiceList(P_CHOICE_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandSequenceList(P_SEQUENCE_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandGroupList(P_GROUP_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function appendElementList(V_ELEMENT_LIST IN OUT XDB.XDB$XMLTYPE_REF_LIST_T, V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
begin
SELECT CAST
SET
CAST(V_ELEMENT_LIST as XDBPM.XMLTYPE_REF_TABLE_T)
MULTISET UNION
CAST(V_CHILD_ELEMENT_LIST as XDBPM.XMLTYPE_REF_TABLE_T)
as XDB.XDB$XMLTYPE_REF_LIST_T
into V_ELEMENT_LIST
from DUAL;
return V_ELEMENT_LIST;
end;
function expandModel(P_MODEL XDB.XDB$MODEL_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
if P_MODEL.ELEMENTS is not null then
V_ELEMENT_LIST := P_MODEL.ELEMENTS;
end if;
if (P_MODEL.CHOICE_KIDS is not NULL) then
V_CHILD_ELEMENT_LIST := expandChoiceList(P_MODEL.CHOICE_KIDS);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end if;
if (P_MODEL.SEQUENCE_KIDS is not NULL) then
V_CHILD_ELEMENT_LIST := expandSequenceList(P_MODEL.SEQUENCE_KIDS);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end if;
-- Process ANYS
if (P_MODEL.GROUPS is not NULL) then
V_CHILD_ELEMENT_LIST := expandGroupList(P_MODEL.GROUPS);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end if;
return V_ELEMENT_LIST;
end;
function expandChoiceList(P_CHOICE_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
cursor getChoices is
select c.XMLDATA MODEL
from XDB.XDB$CHOICE_MODEL c, TABLE(P_CHOICE_LIST) cl
where ref(c) = value(cl);
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
for c in getChoices loop
V_CHILD_ELEMENT_LIST := expandModel(c.MODEL);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end loop;
return V_ELEMENT_LIST;
end;
function expandSequenceList(P_SEQUENCE_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
cursor getSequences is
select s.XMLDATA MODEL
from XDB.XDB$SEQUENCE_MODEL s, TABLE(P_SEQUENCE_LIST) sl
where ref(s) = value(sl);
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
for s in getSequences loop
V_CHILD_ELEMENT_LIST := expandModel(s.MODEL);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end loop;
return V_ELEMENT_LIST;
end;
function expandGroupList(P_GROUP_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T; V_MODEL XDB.XDB$MODEL_T;
cursor getGroups is
SELECT CASE
-- Return The MODEL Definition for the CHOICE, ALL or SEQUENCE
WHEN gd.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
WHEN gd.XMLDATA.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = gd.XMLDATA.SEQUENCE_KID)
WHEN gd.XMLDATA.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = gd.XMLDATA.CHOICE_KID)
END MODEL
FROM XDB.XDB$GROUP_DEF gd, XDB.XDB$GROUP_REF gr, TABLE(P_GROUP_LIST) gl
WHERE ref(gd) = gr.XMLDATA.GROUPREF_REF
and ref(gr) = value(gl);
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
for g in getGroups loop
V_CHILD_ELEMENT_LIST := expandModel(g.MODEL);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end loop;
return V_ELEMENT_LIST;
end;
function getComplexTypeElementList(P_COMPLEX_TYPE_REF REF XMLTYPE)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_MODEL XDB.XDB$MODEL_T;
V_BASE_TYPE REF XMLTYPE;
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T := XDB.XDB$XMLTYPE_REF_LIST_T();
begin
SELECT ct.XMLDATA.BASE_TYPE,
CASE
-- Return The MODEL Definition for the CHOICE, ALL or SEQUENCE
WHEN ct.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = ct.XMLDATA.ALL_KID)
WHEN ct.XMLDATA.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = ct.XMLDATA.SEQUENCE_KID)
WHEN ct.XMLDATA.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = ct.XMLDATA.CHOICE_KID)
WHEN ct.XMLDATA.GROUP_KID is not NULL
-- COMPLEXTYPE is based on a GROUP.
THEN (
-- RETURN The CHOICE, ALL or SEQUENCE for GROUP
SELECT CASE
WHEN gd.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
WHEN gd.XMLDATA.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = gd.XMLDATA.SEQUENCE_KID)
WHEN gd.XMLDATA.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = gd.XMLDATA.CHOICE_KID)
END
FROM XDB.XDB$GROUP_DEF gd, xdb.xdb$GROUP_REF gr
WHERE ref(gd) = gr.XMLDATA.GROUPREF_REF
and ref(gr) = ct.XMLDATA.GROUP_KID
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.ALL_KID is not NULL
-- THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.ALL_KID)
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.SEQUENCE_KID is not NULL
-- THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.SEQUENCE_KID)
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.CHOICE_KID is not NULL
-- THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.CHOICE_KID)
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.GROUP_KID is not NULL
-- -- COMPLEXTYPE is based on a GROUP.
-- THEN (
-- -- RETURN The CHOICE, ALL or SEQUENCE for GROUP
-- SELECT CASE
-- WHEN gd.XMLDATA.ALL_KID is not NULL
-- THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
-- WHEN gd.XMLDATA.SEQUENCE_KID is not NULL
-- THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = gd.XMLDATA.SEQUENCE_KID)
-- WHEN gd.XMLDATA.CHOICE_KID is not NULL
-- THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = gd.XMLDATA.CHOICE_KID)
-- END
-- FROM XDB.XDB$GROUP_DEF gd, xdb.xdb$GROUP_REF gr
-- WHERE ref(gd) = gr.XMLDATA.GROUPREF_REF
-- and ref(gr) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.GROUP_KID
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = ct.XMLDATA.COMPLEXCONTENT.EXTENSION.ALL_KID)
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = ct.XMLDATA.COMPLEXCONTENT.EXTENSION.SEQUENCE_KID)
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = ct.XMLDATA.COMPLEXCONTENT.EXTENSION.CHOICE_KID)
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.GROUP_KID is not NULL
-- COMPLEXTYPE is based on a GROUP.
THEN (
-- RETURN The CHOICE, ALL or SEQUENCE for GROUP
SELECT CASE
WHEN gd.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
-
Maximum number of columns in a table or view is 1000
Post Author: TinaReifer
CA Forum: Formula
I am trying to create a direct link from Tririga / Oracle database into Crystal XI. The data I am attempting to pull is from the RETransaction (Escalations). The error I keep receiving is shown below. Has anyone run across this problem and found a solution that can be shared?
Very Appreciative for any feedback.
Tina Reifer
"Failed to retrieve data from the database.
Details: HY000:[Oracle][ODBC][Ora]ORA-01792: maximum number of columns in a table or view is 1000
[Database Vendor Code: 1792]"Post Author: synapsevampire
CA Forum: Formula
Try posting your software, its version, and the type of connectivity you're using for oracle.
Older versions of Crystal used a proprietary Oracle ODBC driver that came with Crystal, but you should SWITCH away from using ODBC anyway, not sure why you elected to use it, it's slower and more problematic.
You'll see Oracle Server listed as a data source, that is generally the best connectivity to use.
Also, what version of Oracle is it, and what Oracle client are you using?
You might need your Oracle dbas assistance here.
Anyway, the error is not a Crystal error, it's being raised by the ODBC driver, and Oracle used to have a maximum of 1024 colums I think it was...been a while...
-k -
What is the maximum number of row for a table control in LabWindows/CVI ?
I use LabWindows CVI 8.5.1 (MMI first developped in version 6.0).
In one of our many MMI, a table control contains a list of aircraft parameters.
We can add as many parameters (row) as we want but over 40 000 we observe a crash of the LabWindows CVI runtime.
Our client want to inscrease the number of parameters (row) up to 200 000 !!!
So my questions are:
What is the real maximum number of row for the table control ?
Is this maximum number of row different on LabWindows 2010 version ?
Or is there an other solution ?
ThanksGreetings,
Can you clarify what you mean by "crash"? Is there an error message thrown? Is it possible that you've consumed all of the available memory?
Please let me know.
Thanks, James Duvall
Product Support Engineer
National Instruments -
Maximum number of columns in a table
Hi all
I want to know the maximum number of columns in a table. Every people say either don't no? or else some are saying some number. Please can any body help me.
Karthikeyan.KesavanEvery people say either don't no?
or else some are saying some numberThen why not read the documentation ? -
Maximum Number of Columns that adf table can support in JDeveloper 10.1.3.1
Hi All,
I'm using Toplink 10.1.3.1 . In JDeveloper 10.1.3.1 .
I'm Trying to display the columns of a table which is having the more than 380 columns.
When I'm trying to display the columns in adf table, it is getting hanged. The console of the displaying that "too long".
If Execute the Application with nearly 50 columns, It is working fine.
what is the Maximum number of columns that adf table can support. Is there any other solution for my problem.
could anyone help me out.
Thanks in advance,
regards,
SatishHi,
I am not sure there exist a limitation in columns and if the application hangs then this probably is a bug either in the business service or the view (which can also be due to that the server runs out of memory because of the created object instances).
However, in my opinion a table with 380 columns is a loud cry for denormalization
Frank -
Maximum number of partitions allowed per table.
Interesting findings with interval partitioning:
SQL> SELECT *
2 FROM v$version
3 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> DROP TABLE tbl PURGE
2 /
Table dropped.
SQL> CREATE TABLE tbl(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 INTERVAL (INTERVAL '1' DAY)
7 (
8 PARTITION p1 VALUES LESS THAN (date '-857-12-31')
9 )
10 /
Table created.
SQL> select partition_name,
2 high_value
3 from user_tab_partitions
4 where table_name = 'TBL'
5 /
PARTITION_NAME HIGH_VALUE
P1 TO_DATE('-0857-12-31 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'N
LS_CALENDAR=GREGORIAN')
SQL> INSERT
2 INTO tbl
3 VALUES(
4 1,
5 sysdate
6 )
7 /
1 row created.
SQL> DROP TABLE tbl PURGE
2 /
Table dropped.
SQL> CREATE TABLE tbl(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 INTERVAL (INTERVAL '1' DAY)
7 (
8 PARTITION p1 VALUES LESS THAN (date '-858-01-01')
9 )
10 /
Table created.
SQL> select partition_name,
2 high_value
3 from user_tab_partitions
4 where table_name = 'TBL'
5 /
PARTITION_NAME HIGH_VALUE
P1 TO_DATE('-0858-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'N
LS_CALENDAR=GREGORIAN')
SQL> INSERT
2 INTO tbl
3 VALUES(
4 1,
5 sysdate
6 )
7 /
INTO tbl
ERROR at line 2:
ORA-14300: partitioning key maps to a partition outside maximum permitted number of partitions
SQL> From Logical Database Limits:
Maximum number of partitions allowed per table or index: 1024K - 1
I always thought limit implies to number of actual, not potential partitions, however it looks like I was wrong, although it makes not much sense to limit potential and not actual partitions:
SQL> select trunc(sysdate) - date '-858-01-01',
2 1024 * 1024 - 1
3 from dual
4 /
TRUNC(SYSDATE)-DATE'-858-01-01' 1024*1024-1
1048661 1048575
SQL> select to_char(DATE'-858-01-01' + 1048575,'MM/DD/YYYY')
2 from dual
3 /
TO_CHAR(DA
11/17/2012
SQL> So tomorrow "magic" date should increase by one day. I'll test it. But more interesting if tomorrow I will be able to insert a row that forms a new partition into table TBL.
SY.rp0428 wrote:
The other argument is that Oracle has to be able to automatically create any partition required and it can only create 1024k - 1. So if you create yours with sysdate how could it create all of the others?Not sure I follow. What is the purpose of counting potential partitions? Partition part# iin sys.tabpart$ is not assigned based on potential partition position. If I issue a DDL to create new partition regardless of interval/non-interval partitioning Oracle has to check how many partitions table has so far or po and raise same/similar exception if partition I am asking to create is over the limit. And, in any case, knowing we can create all potential partitions at table create time doesn't mean I will not try to insert data outside the range. So there is absolutely no guarantee Oracle can automatically create any partition requested. Again, I don't understand why creating non-interval partitioned table with a single initial partition has partition count of 1:
SQL> DROP TABLE tbl1 PURGE
2 /
Table dropped.
SQL> CREATE TABLE tbl1(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 (
7 PARTITION p1 VALUES LESS THAN (date '-857-12-31')
8 )
9 /
Table created.
SQL> SELECT partition_count
2 FROM user_part_tables
3 WHERE table_name = 'TBL1'
4 /
PARTITION_COUNT
1
SQL>And interval partitioned table with same single initial partition has partition count of 1048575:
SQL> CREATE TABLE tbl1(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 INTERVAL (INTERVAL '1' DAY)
7 (
8 PARTITION p1 VALUES LESS THAN (date '-857-12-31')
9 )
10 /
Table created.
SQL> SELECT partition_count
2 FROM user_part_tables
3 WHERE table_name = 'TBL1'
4 /
PARTITION_COUNT
1048575
SQL> Would be interesting to find out what forces Oracle to go into potential partition mode for interval partitioning.
SY. -
Register XSD - ORA-01792: maximum number of columns in a table or view is 1000
Hi All,
I am trying to register 3 schemas HTNG_ChargePostingRS.xsd,HTNG_ServiceIssueCreateRQ.xsd,HTNG_ServiceIssueNotifRQ.xsd. When I do I get the above error. I tried again but this time I set the genTables => FALSE. I was able to register all but ChargePosting as it gave the same error.
My questions are:
1. What do the tables do? The only thing I will be using these schema's for is to validate incoming requests and validating my response.
2. Why if I do not generate the table do I still get the error?You probably don't need object relational storage (register the schema's for binary XML usage).
That said given that you only want to use it for validation, use odie_63's advice, and register the schema with gentypes=false and gentables=false. That should suffice.
If you need object relational storage and/or gentables=true, than the only way to circumvent the "1000 column" limit is to break up sections of the XML Schema. For example, store a complextype or a section of the XML Schema "out of line".
To see where a good place and/or what the culprit section is, you could use the following "analysis" script (thanks to mdrake-Oracle) for this kind of problem.
1. Register Types with GENTABLES false;
2. Use the attached script to analyze the type model
3. Select * from TYPE_SUMMARY where COLUMN_COUNT > 1000 --- identifies the problem
4. SELECT * from expanded_type_summary where type_name = 'Some type withmore than 1000 columns'
gives you an idea where the columns are coming from
5. Annotate the schema to move a chunck out of line
6. Try again.
set echo on
spool typeAnalysis.log
DROP TABLE TYPE_SUMMARY
create global temporary table TYPE_SUMMARY
TYPE_NAME VARCHAR2(128),
OWNER VARCHAR2(32),
COLUMN_COUNT NUMBER
ON COMMIT PRESERVE ROWS
grant all on TYPE_SUMMARY to public
set serveroutput on
create table TYPE_SUMMARY
TYPE_NAME VARCHAR2(128),
OWNER VARCHAR2(32),
COLUMN_COUNT NUMBER
create or replace view MISSING_TYPES
as
select level TYPE_LEVEL, ata.TYPE_NAME, ata.OWNER, ATTR_NAME, ATTR_TYPE_NAME, ATTR_TYPE_OWNER
from ALL_TYPES at, ALL_TYPE_ATTRS ata
where at.TYPE_NAME = ata.TYPE_NAME
and INHERITED = 'NO'
and at.OWNER = ata.OWNER
and not exists
select 1
from TYPE_SUMMARY ts
where nvl(ts.OWNER,'SYS') = nvl(ata.ATTR_TYPE_OWNER,'SYS')
and ts.TYPE_NAME = ata.ATTR_TYPE_NAME
connect by SUPERTYPE_NAME = prior at.TYPE_NAME
and SUPERTYPE_OWNER = prior at.OWNER
create or replace view EXPANDED_TYPE_SUMMARY
as
select ata.TYPE_NAME, ata.OWNER, ata.ATTR_NAME, ata.ATTR_TYPE_NAME, ata.ATTR_TYPE_OWNER, ts.COLUMN_COUNT
from ALL_TYPE_ATTRS ata, TYPE_SUMMARY ts
where ata.ATTR_TYPE_NAME = ts.TYPE_NAME
and ata.ATTR_TYPE_OWNER = ts.OWNER
union all
select at.SUPERTYPE_NAME TYPE_NAME, at.SUPERTYPE_OWNER OWNER, 'SYS$EXTENSION' ATTR_TYPE_NAME, at.TYPE_NAME ATTR_TYPE_NAME, at.OWNER ATTR_TYPE_OWNER, ts.COLUMN_COUNT
from ALL_TYPES at, TYPE_SUMMARY ts
where at.TYPE_NAME = ts.TYPE_NAME
and at.OWNER = ts.OWNER
declare
V_OLD_TYPE_COUNT NUMBER := 0;
V_NEW_TYPE_COUNT NUMBER := 0;
cursor getTypeSummary
is
select ata.TYPE_NAME, ata.OWNER, sum(COLUMN_COUNT) + 2 as TOTAL_COLUMN_COUNT
from ALL_TYPE_ATTRS ata, TYPE_SUMMARY ts,
select distinct TYPE_NAME, OWNER
from ALL_TYPES at1
where not exists
-- Ensure all my attributes are known
select 1
from ALL_TYPE_ATTRS ata
where not exists
select 1
from TYPE_SUMMARY ts
where ts.TYPE_NAME = ata.ATTR_TYPE_NAME
and nvl(ts.OWNER,'SYS') = nvl(ata.ATTR_TYPE_OWNER,'SYS')
and ata.TYPE_NAME = at1.TYPE_NAME
and ata.OWNER = at1.OWNER
and not exists
select 1
from TYPE_SUMMARY ts
where at1.TYPE_NAME = ts.TYPE_NAME
and at1.OWNER = ts.OWNER
) tl
where ata.TYPE_NAME = tl.TYPE_NAME
and ata.OWNER = tl.OWNER
and ts.TYPE_NAME = ata.ATTR_TYPE_NAME
and nvl(ts.OWNER,'SYS') = nvl(ata.ATTR_TYPE_OWNER,'SYS')
group by ata.TYPE_NAME, ata.OWNER;
cursor getSubTypes(C_TYPE_NAME VARCHAR2, C_OWNER VARCHAR2)
is
select TYPE_NAME, OWNER
from ALL_TYPES at1
where SUPERTYPE_NAME = C_TYPE_NAME
and SUPERTYPE_OWNER = C_OWNER;
cursor getSubTypes(C_TYPE_NAME VARCHAR2, C_OWNER VARCHAR2)
is
select ts.TYPE_NAME, ts.OWNER,
from TYPE_SUMMARY ts,
select distinct TYPE_NAME, OWNER
from ALL_TYPES at1
where at1.SUPERTYPE_NAME = C_TYPE_NAME
and at1.SUPERTYPE_OWNER = C_OWNER
and not exists
-- Ensure all my subtypes are known
select 1
from TYPE_SUMMARY ts
where ts.TYPE_NAME = at1.TYPE_NAME
and ts.OWNER = at1.OWNER
) tl
where ts.TYPE_NAME = tl.TYPE_NAME
and ts.OWNER = tl.OWNER;
V_COLUMN_COUNT NUMBER;
V_SUBTYPES_RESOLVED BOOLEAN;
begin
execute immediate 'TRUNCATE TABLE TYPE_SUMMARY';
insert into TYPE_SUMMARY
select DISTINCT attr_type_name, ATTR_TYPE_OWNER, 1
from ALL_TYPE_ATTRS ata
where not exists
select TYPE_NAME, OWNER
from ALL_TYPES at
where ata.ATTR_TYPE_NAME = at.TYPE_NAME
and ata.ATTR_TYPE_OWNER = at.OWNER
and not exists
select syn.SYNONYM_NAME, syn.OWNER
from ALL_SYNONYMS syn, ALL_TYPES at
where syn.TABLE_NAME = at.TYPE_NAME
and syn.TABLE_OWNER = at.OWNER
and syn.SYNONYM_NAME = ata.ATTR_TYPE_NAME
and syn.OWNER = ata.ATTR_TYPE_OWNER
commit;
insert into TYPE_SUMMARY
select DISTINCT type_name, owner, 1
from ALL_TYPES at
where not exists
select TYPE_NAME, OWNER
from ALL_TYPE_ATTRS ata
where ata.TYPE_NAME = at.TYPE_NAME
and ata.OWNER = at.OWNER
and not exists
select COLL_TYPE, OWNER
from ALL_COLL_TYPES act
where act.TYPE_NAME = at.TYPE_NAME
and nvl(act.OWNER,'SYS') = nvl(at.OWNER,'SYS')
-- All collection types cost 2 COLUMN_COUNT except for the PD, XMLEXTRA and XMLNAMESPACES
insert into TYPE_SUMMARY values ('XDB$RAW_LIST_T','XDB',1);
insert into TYPE_SUMMARY values ('XDB$ENUM_T','XDB',1);
insert into TYPE_SUMMARY
select TYPE_NAME, OWNER, 2
from ALL_COLL_TYPES
where not (OWNER = 'XDB' and TYPE_NAME = 'XDB$RAW_LIST_T');
commit;
select count(*)
into V_NEW_TYPE_COUNT
from TYPE_SUMMARY;
WHILE (V_OLD_TYPE_COUNT <> V_NEW_TYPE_COUNT) loop
V_OLD_TYPE_COUNT := V_NEW_TYPE_COUNT;
insert into TYPE_SUMMARY
select ata.TYPE_NAME, ata.OWNER, sum(COLUMN_COUNT) + 2
from ALL_TYPE_ATTRS ata, TYPE_SUMMARY ts,
select distinct TYPE_NAME, OWNER
from ALL_TYPES at1
where not exists
-- Ensure all my attributes are known
select 1
from ALL_TYPE_ATTRS ata
where not exists
select 1
from TYPE_SUMMARY ts
where ts.TYPE_NAME = ata.ATTR_TYPE_NAME
and nvl(ts.OWNER,'SYS') = nvl(ata.ATTR_TYPE_OWNER,'SYS')
and ata.TYPE_NAME = at1.TYPE_NAME
and ata.OWNER = at1.OWNER
and not exists
select 1
from TYPE_SUMMARY ts
where at1.TYPE_NAME = ts.TYPE_NAME
and at1.OWNER = ts.OWNER
and not exists
select 1
from ALL_TYPES at
where at.SUPERTYPE_NAME = at1.TYPE_NAME
and at.SUPERTYPE_OWNER = at1.OWNER
) tl
where ata.TYPE_NAME = tl.TYPE_NAME
and ata.OWNER = tl.OWNER
and ts.TYPE_NAME = ata.ATTR_TYPE_NAME
and nvl(ts.OWNER,'SYS') = nvl(ata.ATTR_TYPE_OWNER,'SYS')
group by ata.TYPE_NAME, ata.OWNER;
commit;
select count(*)
into V_NEW_TYPE_COUNT
from TYPE_SUMMARY;
end loop;
V_OLD_TYPE_COUNT := 0;
WHILE (V_OLD_TYPE_COUNT <> V_NEW_TYPE_COUNT) loop
V_OLD_TYPE_COUNT := V_NEW_TYPE_COUNT;
for t in getTypeSummary loop
V_COLUMN_COUNT := t.TOTAL_COLUMN_COUNT;
V_SUBTYPES_RESOLVED := TRUE;
for st in getSubTypes(T.TYPE_NAME,T.OWNER) loop
begin
select V_COLUMN_COUNT + (COLUMN_COUNT - t.TOTAL_COLUMN_COUNT)
into V_COLUMN_COUNT
from TYPE_SUMMARY
where TYPE_NAME = st.TYPE_NAME
and OWNER = st.OWNER;
exception
when no_data_found then
V_SUBTYPES_RESOLVED := FALSE;
when others then
RAISE;
end;
end loop;
if (V_SUBTYPES_RESOLVED) then
insert into TYPE_SUMMARY values (t.TYPE_NAME,t.OWNER, V_COLUMN_COUNT);
dbms_output.put_line('Processing : ' || t.TYPE_NAME || ' COLUMN_COUNT = ' || V_COLUMN_COUNT);
end if;
end loop;
commit;
insert into TYPE_SUMMARY
select ata.TYPE_NAME, ata.OWNER, sum(COLUMN_COUNT) + 2
from ALL_TYPE_ATTRS ata, TYPE_SUMMARY ts,
select distinct TYPE_NAME, OWNER
from ALL_TYPES at1
where not exists
-- Ensure all my attributes are known
select 1
from ALL_TYPE_ATTRS ata
where not exists
select 1
from TYPE_SUMMARY ts
where ts.TYPE_NAME = ata.ATTR_TYPE_NAME
and nvl(ts.OWNER,'SYS') = nvl(ata.ATTR_TYPE_OWNER,'SYS')
and ata.TYPE_NAME = at1.TYPE_NAME
and ata.OWNER = at1.OWNER
and not exists
select 1
from TYPE_SUMMARY ts
where at1.TYPE_NAME = ts.TYPE_NAME
and at1.OWNER = ts.OWNER
and not exists
select 1
from ALL_TYPES at
where at.SUPERTYPE_NAME = at1.TYPE_NAME
and at.SUPERTYPE_OWNER = at1.OWNER
) tl
where ata.TYPE_NAME = tl.TYPE_NAME
and ata.OWNER = tl.OWNER
and ts.TYPE_NAME = ata.ATTR_TYPE_NAME
and nvl(ts.OWNER,'SYS') = nvl(ata.ATTR_TYPE_OWNER,'SYS')
group by ata.TYPE_NAME, ata.OWNER;
commit;
select count(*)
into V_NEW_TYPE_COUNT
from TYPE_SUMMARY;
end loop;
end;
set pages 0 lines 256
column TYPE_NAME FORMAT A30
column OWNER FORMAT A30
select count(*)
from TYPE_SUMMARY
select *
from TYPE_SUMMARY
where owner=user
order by COLUMN_COUNT
select type_name, owner
from ALL_TYPES at
where not exists
selec -
What is the maximum number of columns allowed on a table?
What is the maximum number of columns that a table can have? I have a research team that wants to have 140,000 columns on one table and 2000 rows.
What would be the best way to input (SQL*Loader?) that data on this table and retrieve data from this table? The highest number of columns that I have implemented on a table was 500.
Any feedback would be greatly appreciated.
Thanks. ;-)Holy cow 140,000 columns and 2000 rows!! I think you are going to have to tell someone to come up with a better design because that doesn't sound like a relational table. Besides, I found this in the Oracle 8.1.7 Reference Manual:
"The absolute maximum number of columns in a table is 1000. However, when you create an object table (or a relational table with columns of object, nested table, varray, or REF type), Oracle maps the columns of the user-defined types to relational columns, creating in effect "hidden columns" that count toward the 1000-column limit. For details on how Oracle calculates the total number of columns in such a table, please refer to Oracle8i Administrator's Guide." -
Maximum number of field in table?
hi...
What is the limit of maximum number of fields in oracle 9i table?
Regards,
S.Ashokkumarhttp://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_73a.htm#2095335
"The absolute maximum number of columns in a table is 1000"
Rgds. -
Number of Records in one table
Hi All,
Can anybody let me know that in Oracle9i lite database, one table can have how many records. I mean is their any restriction on maximum number of ROWs for a table, like Palm database (PDB files) has a restriction that one table can have maximum 64000 rows.
Is the same thing happen with Oracle lite database also
Thansk in advance.We have had several tests of hundreds of thousands of rows using 9iLite on a PocketPC host. The upper bound appears to be based upon the physical limit of the host and not 9iLite.
RP. -
Max Number of Colums in a table..
Hi All,
I Am using Oracle 9i version..
May i Know Maximum Number of Columns in a table. ? Is there any possibilty to extend that?
Advanced Thanking...May i Know Maximum Number of Columns in a table.1000. But be aware that this includes also hidden columns! You might not even be able to extend to 1000 if you really needed to:
SQL> declare
str long;
begin
for i in 1..998 loop
str := str || 'a' || i || ' integer,';
end loop;
execute immediate 'create table t (' || rtrim(str,',') || ')';
end;
PL/SQL procedure successfully completed.
SQL> select count(*) from cols where table_name = 'T'
COUNT(*)
998
1 row selected.
SQL> create index t_idx on t (lower(a1), lower(a2))
Index created.
SQL> alter table t add (a999 integer)
alter table t add (a999 integer)
Error at line 21
ORA-01792: maximum number of columns in a table or view is 1000
SQL> drop table t
Table dropped. -
Registerschema gives ORA-01792: maximum number of columns...
Hi,
DB: Oracle9i Enterprise Edition Release 9.2.0.6.0
Opp Sys: HP-UX
I've just increased the size of an XSD we have loaded in a customers database and attempting to reload using dbms_xmlschema.registerschema gives the following error:
ORA-31084: error while creating table "SOLO"."LetterRoot5799_TAB" for element "LetterRoot"
ORA-01792: maximum number of columns in a table or view is 1000
ORA-02310: exceeded maximum number of allowable columns in table
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 0
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 26
ORA-06512: at "SOLO.WORK_TEST_LETTERS_XSD", line 23
ORA-06512: at line 2
Is there a work around for this?
Thanks,
Mike MooreHi! I faced the same problem as author of a thread. At first it was just the same and I used solution that was offered - add attribute xdb:SQLInline="false".
But now this error (ORA-01792: maximum number of columns in a table or view is 1000) became to rise on element that doesn't have a lot of attributes or subelements that coul exceed limit of 1000! Moreover it is based on complex type that already exists! It was created during another schema registration, which is included in schema that I'm trying to register now!
Does anyone challenged this problem?
I use Oracle9i Enterprise Edition Release 9.2.0.5.0 -
Limitation for number of columns in a table
What is the maximum number for the number of columns in a table or a view?
jHi,
The maximum number of columns that can be created in a relational table is 1000. Look at the documentation for more details.
Excerpt from the Oracle9i SQL Reference Release 2 (9.2) documentation:
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_73a.htm#2061431
"The absolute maximum number of columns in a table is 1000. However, when you create an object table (or a relational table with columns of object, nested table, varray, or REF type), Oracle maps the columns of the user-defined types to relational columns, creating in effect "hidden columns" that count toward the 1000-column limit."
Please post database related questions in Database-general forum for quick response.
General Database Discussions
Hope that helps.
Savitha. -
Maximum number of allowed pages in Pivot Table exceeded
Hi,
I am working on Oracle Business Intelligence 10.1.3.2.1 . We have a requirement to show one report in the Pivot layout.
But it throws one error: "Maximum number of allowed pages in Pivot Table exceeded (Configured Limit: 1000) "
So I have modified the Instanceconfig.xml with the following piece of code:
<PivotView>
<MaxVisibleColumns>9000</MaxVisibleColumns>
<MaxVisiblePages>90000</MaxVisiblePages>
<MaxVisibleRows>9000000</MaxVisibleRows>
<MaxVisibleSections>9000000</MaxVisibleSections>
<ResultRowLimit>9000000</ResultRowLimit>
</PivotView>
<CubeMaxRecords>9000000</CubeMaxRecords>
<CubeMaxPopulatedCells>9000000</CubeMaxPopulatedCells>
The number of records is 30 398. In another report the amount is much higher than this number of records and bring it with no problem.
Can anyone please look into this Issue.Hi
Try checking the link
http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
Hope this helps
Regards
Debo
Maybe you are looking for
-
How do I call a sub vi and have the window appear in a certain location that I specify?
I have a vi that will be used to control a robot. I am using a sub vi that is a sort of joystick-drag the mouse to move the robot. This pops up as a dialog when the user moves the mouse over a graph, but it appears in the middle of the screen. I want
-
10.6.8 Netboot - "Still waiting for root device"
Hi all, I am having trouble with one particular 10.6.8 Netboot image that is hosted on a Mac Pro running 10.5.8 Server. (The main 10.5.8 Server is currently hosting about 15 other Netboot and Netrestore images that work with no problem.) I built th
-
Hi, I am looking for a wireless hard drive to use with Windows Vista that; 1. I can access wirelessly when at home, and 2. I can also access over the tinternet when away from home. Is the Time Capsule the only option and the best option? Thanks
-
After upgrading ios6 my app color note lost all of my notes
Color not lost all of my notes. Any way to get it back?
-
How to Convert Files once downloaded
I downloaded Adobe Reader X and when I open my PDF and click the "convert to Word" icon, it brings me to a broken link online: Not Found The page you requested was not found. You may have made a typing error, or followed a badly formed link.