Maxl statement (display user in group all;) is not working.
Hello,
Hyperion version 9.3.1 upgraded to 9.3.3. Not sure the below issue is because of this
I have an interesting issue with a maxl statement : "display user in group all;". When I execute this statement through command prompt doing essmsh, it does give out any records and also doesn't end. I will have to end it with ctrl+c.
When I execute it through EAS console, then EAS console just hangs.
But, if I try to retrieve the users from groups individually ( I mean "display user in group 'examplegrp';"), then its working fine and throwing out the records.
It is giving me a hard time and my dumb mind not able to figure it out.
Any ideas please?
Thanks
Hi CL, Yes I ran it on the Essbase Server. We actually set it up through a scheduled batch script which was perfectly fine till last month (I guess). We noticed this just a week ago. The only change we had in our environment is that we upgraded 9.3.1 to 9.3.3 recently. Not sure whether it is making any difference.
Thanks,
KK
Similar Messages
-
Project Server 2010 - Project Permissions - Users and Groups filter is not working
Hi,
While giving permissions from project center ribbon on a project - Users and Groups filter is not working, we are not able to filter any user.
I am not sure why this error is occurring i tried giving permissions by opening the project but still the same filtering is not happening. Below is the screen shot
We have installed Service Pack 2 and June 2014 CU recently will this effect ?
Can any one throw some light on this??
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.Hi Geetha,
Which IE version are you using? First I'd try to add the URL to the compatibility mode sites, then to the trusted sites (if it is not done already). Then I'd try to set the default browser as IE8 or 9 (pressing F12, developer tool).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Policies assigned to groups - membership changes not working
I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on group membership.
If I change a user from one group to another group this change does not reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT an option in my environment. All security assignments MUST happen at a group level.What you observed is the expected behavior.
ZESM doesn't updates group membership in real time once a policy has been published. I've described this behavior on previous posts.
What the MC does behind the scenes when you click "Publish" on a container or group object is to assign the policy individually to each member/user. For groups, it resolves membership at the time the policy is published then the MC iterates among each member assigning the policy to each of them. That's why you don't see updates once the policy is published.
Try Updating the published policy to see if that works. From the docs:
Updating a Published Policy
Once a policy has been published to the user(s) or computer(s), simple updates can be maintained by editing the components in a policy, and re-publishing. For example, if the ZENworks Endpoint Security Management Administrator needs to change the WEP key for an access point, the adminstrator only needs to edit the key, save the policy, and click Publish. The affected end-users and computers receive the updated policy (and the new key) at their next check-in.
>>>
From: laurabuckley<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/15/2009 7:16 AM
Subject: Policies assigned to groups - membership changes not working
I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on
group membership.
If I change a user from one group to another group this change does not
reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT
an option in my environment. All security assignments MUST happen at a
group level.
laurabuckley
laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
View this thread: http://forums.novell.com/showthread.php?t=395870 -
My "Group" feature is not working in Pages 5.0.1. Any help here?
My "Group" feature is not working in Pages 5.0.1. Any help here?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!
iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make. -
Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?
What's more, they don't even show on the bluetooth devices list..
-
Double click select all does not work in web site's search area after going back.
After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.Bugzilla has a different login system, unfortunately.
-
TS5180 voiceover all is not working
voiceover all is not working, after press at the home button three quicks press the voice over all is not working, the /CANCEL/START AGAIN/EMERGENCY CALL
even try to press five susequent time still no responseDid you enable VoiceOver to be turned on using 3 clicks on the Home Button?
Settings > General > Accessibility - Triple click Home button for... -
Sound is off in iphone 4.. Speaker mic all sound not working in iphone 4.. What i do? Any help me!!!!
Get a new SIM from your carrier.
-
Maxl statement create user to shared services
<p>when you create a user in shared services, you can specify afirst name, last name, and email address into textboxes.</p><p> </p><p>now, when you create a user with maxl, can you specify to placea first name, last name, and email address into those textboxes? ican only seem to add a comment into the description textbox.</p>
<p>actually, you can't even insert text in the description textbox.the comment code with maxl statement is only for maxl and notshared services.</p>
-
I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
User can see all resources, not only Permitted for his/her Organization
Hi,
I have set three self-serviceable resources as Permitted Resources for a specific organization. So if I click on Permitted Resources for that organization I can see only those three...
When an user of that organization clicks on Request New Resources, all self-serviceable resources are listed to the user, not only the Permitted Resources. I thought the user could see only the permitted resources...
If I log as sys admin and Request Resources for an user of this organization, I can see only the three permitted resources.
I saw the sql statement that OIM run to list the resources:
select
obj.obj_key,obj_name,obj.sdk_key,sdk_name, obj_order_for,obj_auto_prepop, obj_type,
obj_allow_multiple, obj_self_request_allowed,obj_autosave,obj_allowall,
obj_rowver, obj_note,obj_autolaunch
from obj obj
left outer join sdk sdk on obj.sdk_key = sdk.sdk_key
where obj.obj_key in
select distinct obj.obj_key from obj obj
left outer join sdk sdk on obj.sdk_key = sdk.sdk_key
left outer join acp acp on obj.obj_key = acp.obj_key
left outer join oba oba on obj.obj_key = oba.obj_key
where
obj.obj_self_request_allowed='1' or obj.obj_key in
select obj_key from acp where act_key in
select act_key
from usr
where usr_key= 5 and acp_self_servicable = '1'
) and
obj.obj_order_for = 'U' and
(obj.obj_type='Application' or obj.obj_type='Generic') and
obj.obj_key not in
select pop.obj_key
from pop pop, pol pol, pog pog, ugp ugp, usg usg
where
pop.pol_key=pol.pol_key and
pol.pol_key=pog.pol_key and
pog.ugp_key=ugp.ugp_key and
ugp.ugp_key=usg.ugp_key and
usg.usr_key in (5) and
pop.pop_denial='1'
) and
obj.obj_key not in (
select distinct obj.obj_key
from obj obj, obi obi, ost ost, oiu oiu
left outer join orc orc on oiu.orc_key=orc.orc_key
where
oiu.obi_key=obi.obi_key and
oiu.ost_key=ost.ost_key and
upper(ost.ost_status) <> 'REVOKED' and
obi.obj_key=obj.obj_key and
oiu.usr_key in (5) and
obj.obj_allow_multiple='0'
) and
obj.obj_key in
select distinct obj_key
from pkg
where pkg_type='Provisioning'
As you can see in the query above, if I change the snippet below the result is what I expect.
obj.obj_self_request_allowed='1' AND obj.obj_key in
Did I miss to set something or doing something wrong?
Thanks,
Renato.Sorry, but I do not understand your last reply. You mentioned the following:
for option B, even when option A is unchecked, you can set self-request only for a specific organization when assign permitted resources.
Isnt this what you wanted? You should set the resource as permitted resources in all the organizations whose users can request that resource. I have implemented this and it works just fine. It works for both types of requests. a) My resources -> request new resources and b) Requests -> Resources -> Grant resources.
In case of b, depending on the organization to which the selected user belongs, the Resource is displayed. all resources are not displayed.
So the solution is to uncheck in RO and put the resource under specific organizations permitted resources and make it self-requestable. It should work fine. Let me know your exact issue if it does not work this way. -
Dear All,
I am using MSSQL SSRS 2008.
All the reports run properly when viewed via a web browser. However for subscription, I am having a strange
experience.
The subscription having intermitten failure. I need to execute multiple times to get it work.
Following is the exception I am getting:-
Failure sending mail: The user or group name 'xxxxx' is not recognized.Mail will not be resent.
Failure writing file DailyPolicyExportCDN_ST@timestamp : The user or group name 'xxxxx' is not recognized.
Following is the exception I retrieve from log files.
webserver!ReportServer_0-2!1b0c!07/31/2014-05:25:09:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeClientDisconnectionException: A client has disconnected from the Report Server Web service application
domain ReportServer_MSSQLSERVER_0-2-130512716074991980. No corrective action is required. An error code has been submitted to ASP.NET to release the connection. The error code is 800708CA. ---> System.Runtime.InteropServices.COMException: This network connection
does not exist. (Exception from HRESULT: 0x800708CA)
Any idea what went wrong?
Thanks in advanceHi NeoCK,
According to your description, you can access your report successfully, but it fail to send e-mail subscription. Right?
In this scenario, since you can access the report successfully, so this user has permission on report server. Please go to E-mail setting in your Reporting Services Configuration Manager, check if the current user has permission on that SMTP server.
If this is still not working, please recreate the subscription and try again.
Reference:
SUBSCRIPTION
ERRORs : Failure sending mail: The user or group name 'CB_OFFICE\XXXX' is not recognized.
The user or group name 'MYDOMAIN\myuser'
is not recognized
SSRS
2008: Failure writing file ... The user or group name 'domain\user' is not recognized
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
The user or group name is not recognized. (rsUnknownUserName) error
Hi All
i have create a group name Finance using these steps.
my computer rightclick -> manage->create group -> add user
now i add this in reportmanager ->sitesetting -> domainname\Finance.
but getting an error..
"The user or group name 'domainname\Finance' is not recognized. (rsUnknownUserName) "
I also tried to give permission to user those in active directory but getting the same error.
Kindly HelpWhat permission did you give to that account in the Report Manager?
Best Regards,Uri Dimant SQL Server MVP,http://sqlblog.com/blogs/uri_dimant/
Blog : MS SQL Development and Optimization
Blog : Large
scale of database and cleansing -
User and group settings are not pushed
Hello,
I am just setting up a Mavericks environment including Server.app and I am facing a problem that I could not solve up to now.
None of my profile manager settings for users or groups are pushed to the mobile users on my client computer. The device registration worked without problem and also the computer settings are pushed but not the ones for user and group settings.
In my productive mountain lion environment this is no problem.
Is there any was to force the settings update for users as it is possible for computers?
Any hints are appreciated
MichaelI too am having this issue.. I had my school environtment running great on 10.8... then we had to upgrade the server to 10.9 to use the new volume purchashing stuff with ipads.. now this 10.9 has broken all my previous macbooks in the school... I can enroll, install certs, and some networks stuff but the main group with all the macbooks and restrictions will not push... it even removed them from the machiens that were working with 10.8... very big issue.. apple needs to help?
Maybe you are looking for
-
I used to get infinity but now can't?
Hey, I've recently moved house and reluctantly said good bye to really fast and reliable net from virgin. However, before moving I checked to ensure I would be able to get at least some kind of fast internet. And yes I was, I could get upto 76mbps fr
-
Walkman dont have any support for xternal speaker
Dear Sony, Every time i plug in my 3. 5 audio cable in my z2 phone, volume is too low, and i need to move the volume control to full bar in order to have a good sound listening for my 5.1 speakers system. And also this volume alert for the earphone a
-
Work Ceters error in change analysis: "No config stores found"
Hello, I have configured E2E diagnostics succesfully, but when i try to view change analysis (Root cause analysis) for my ECC development system, an error appears: "No config stores found for 'EC1 0020256704 ABAP or no changes found" Any of you have
-
My Iphone 4 has slightly zoomed in on the screen and I can't see icons on bottom or read whole screen. Can somebody advise, I am sure a simple solution?
-
SSD not displaying the accurate amount of disk space available (Macbook Air 2011)
Weird issue and dont know if this is a bad SSD or just a bug in Lion BUT I have an i7 18 ghz 2011 macbook air with 256GB SSD. Now the issue is if i click on "Macintosh HD" and press command +I i get a one number, later i go into disk utility and it s