MB1A Missing cost center in Accounting Document.

Hi All,
WHile I run MB1A transaction & input the movement type & select the order number & save i get a Material Document generated (MSEG ) & an Accounting Document as well ( BSEG ).
My requirement is to fill up the corresponding cost center value in the Accounting document which is blank as of now for all.
Can this be achieved by some Functional setting?
I searched for all USER EXITS & BADI's but non of them seem to have a place where i can modify the BSEG-KOSTL Value.
Need your Valuable inputs on this.
Thanks.
Kevin.

Hi Kevin,
In MB1A the following exits are available,
MBCF0002
MBCF0005
MBCF0006
MBCF0007
MBCF0009
MBCF0010
MBCF0011
MB_CF001
However check by putting a breakpoint on exit EXIT_SAPLFMR4_002 which is accouting document if you can do anything here.
Thanks and regards
Kedar

Similar Messages

  • PO report with cost center & GL account detail

    Hi Guy,
    Any body so kind to help me to find out a standrd SAP report which give the account assingnment detail about PO order line item.
    The standard SAP report ME2K give the assigned cost center but not about  the assigned GL account.
    My requirement is as following:
    PO NO  Item   Material   Quantity   Cost Center     GL Account No
    It means PO line item assinged to cost center & GL account.
    Thanks in advance.
    Rgds,
    sp sahu

    Mr Radhakrishnan & Mr MS,
    The ME2K transction only give cost center wise PO. Not give the information about the GL account assigned to the PO.
    Whereas in KSB1 report give the information about the PO for which some material document already posted. I mean to say, KSB1 include those PO which have PO histrory is present. what about those po for which no GR or IR has done. It may come in commitment report that is in KSB2.
    My requirement is a report which give information about the GL account assigned to all the PO created in the system.
    Thanks for reply.
    Regards,
    sp sahu

  • Profit center in accounting document is differ with profit center in PO

    Dear Expert,
    I have created 2 PO. 1 PO is with material number, and  the other PO is without material number. both PO have account assignment category H ( Cost Center - COGS)
    I also have created 2 MIGO with reference to each of the PO. but when I checked the FI document in Material document I found that the profit center in accounting document is different with profit center in PO - this problem only occur for PO with material number.  Profit center displayed in accounting document is refer to ZOKB9 (user exit)
    Material ledger is active for this material number.
    My question is what may cause the different profit center in accounting document and in PO?
    How to solve it?
    Thanks
    Pauline

    HI,
    possible reasons are :
    In GR document profit center pulled from PO Material :
    If you have ordered with material code, must check profit center assigned into material by mm03/Plant Data2
    If you have ordered without material code, than check cost center assigned Profit center by 1KE4

  • Cost center on delivery document

    Hi,
    I have created a sample order , which has cost center assignment on the header level. This cost center will be copied to the delivery document line item on financial processing tab.
    Few of sample orders were created without cost center assignment. Now the deliveries are not getting PGI'ed because of missing cost center. How will i change/add cost center manually on the delivery document line item, the field is grayed out.
    If i cannot change it here, whats the solution for this problem.
    Greatly appreciate your help.

    Can you pls tell me how you assigned the cost center we have a practice of profitable analysis  , i want t have cost center based selling / delivery ( stock reduction value should go to this gl )

  • Change profit center for accounting document on item line

    HI
    I need to change profit center for accounting document on item line, for that purpose I have used user-exit EXIT_SAPLV60B_004, but my new profit center gets latly overwritten in FM CO_DOCUMENT_CHECK (which is called from FM AC_DOCUMENT_CREATE). It gets overwritten from COBL. Is there any way to solve this?

    HI,
    possible reasons are :
    In GR document profit center pulled from PO Material :
    If you have ordered with material code, must check profit center assigned into material by mm03/Plant Data2
    If you have ordered without material code, than check cost center assigned Profit center by 1KE4

  • Finance and Controlling report in combination with Cost center, GL account, Internal Order

    Hi Members,
    Finance and Controlling report in combination with Cost center, GL account, Internal Order.
    Please provide any slandered report in all 3 dimension.
    Thanks
    Dileep Kumar

    Search this query in FI Controlling forum am sure you will get useful results there.
    This kind of reports related to Controlling are usually created using Report Writer tool.
    In fact majority of reports in Controlling component is created using Report Writer only.

  • Wrong profit center in accounting document

    Dear Experts,
    There was wrong profit center in accounting document since the user changed the profit center in material master to the correct one after posting is created.
    How to make correction in Accounting and controlling side for the wrong profit center?
    Please advice.
    Thank you in advance.

    Hi,
    If you want to make an update in FI, you will have to reverse the document and post it again. However, if it's sufficient for you to make an internal update in PCA, you can use 9KE0 transaction.
    Regards,
    Eli

  • Where to change the cost center in material document?

    Hi everyone,
    I have a problem. Last month, I've created a new business area, with its own division and cost center.
    In the test client, the whole process of creating requisition, PO, goods receive, cancel goods receive (return to vendor), create sales order, delivery and goods issue went well.
    But, today, when one of my users tried to cancel goods receive (movement type 102), the following error message was displayed:
    KMXX/KM11 CTR belong to business area M110 not M140.
    Since the PO was created for a stock item, there is no account assignment, so I am wondering if I have missed out something in configuration, especially in defining account assignment for automatic posting? Can anyone help?
    Thank you very much.
    Anisah

    HI,
    There should have been some changes done in the system after thr initial docs were created.
    Please ensure that the said cost centre of interest is assigned to the appropriate Business area.
    The error seems to be an invalid combination of the Business area to the cost centre.
    If not then please maintain the same.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Hide Cost Center & GL Account in Movement Types 551-556

    All,
    Requirement - Movement Types 551-556 should not allow the user to see or enter the Cost Center or G/L Account.
    How can I remove the user from having to enter and see the cost center and G/L account fields from movement types 551-556?
    I see I can make them both optional but this does not seem to be working. When I got into MB1A, I am still forced to enter both values. I
    Please advise!
    Thanks!

    He wanted the cost center (or any other account assignment) is to be displayed only but not ready for input in MB1A screen. Then how can user enter the cost object to post the loss. System by design enables user to enter his own GL account (if that GL is configured to the process).
    Automatic account determination helps to identify the correct GL account only for any movement type (say process) but not the account assignment objects like cost center, WBS element, order etc..

  • User exit to input Cost center in Billing document

    Hi all,
    My requirement is I need to get the cost center value in accounting document ( FB03)
    Actually a contract is getting created and a billing document is generated and saved.
    There is no cost center in contract creation screen (VA41)but it is visible in billing document(vf01)  in grey mode.
    Now my requiremnt is based on contract type ,distribution channel, sales org. and division I need to pick the cost center and should get display the value in accounting document(fb03).
    For this do I need to go for user exit ? If yes then where should I write it ?
    In Contract creation screen(VA41) or in the billing document screen? and plz guide me the program name and User exit,
    or is there any other solution for this?
    Plz answer

    I think you have to try from the Txn VF01 and the below are the BAdi and method details
    Check the BAdi SD_CIN_LV60AU02 in the method EXCISE_INVOICE_CREATE check the importing parameter of the method
    XVBRP     Importing     Type     VBRP_TAB

  • MB1A and Cost Center (KOSTL) based on Order (AUFNR)

    Hello,
    I have a requirement, where i must make a modification in transaction MB1A in the following way:
    On the second screen "Enter Goods Issue: New items" i must fill automatically the Cost Center field, based on the Order number (after the Enter).
    How can I do this?
    I've tried with a substitution in GGB1 but it didn't worked:
    select single kostv from coas into cobl-kostl where aufnr = cobl-aufnr.
    Thanks in advance !
    Tohi

    HI
    Can you check the below exits
    Transaction Code - MB1A                     Goods Withdrawal
    Enhancement/ Business Add-in            Description
    Enhancement
    MBCF0002                                Customer function exit: Segment text in material doc. item
    MBCF0005                                Material document item for goods receipt/issue slip
    MBCF0006                                Customer function for WBS element
    MBCF0007                                Customer function exit: Updating a reservation
    MBCF0009                                Filling the storage location field
    MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011                                Read from RESB and RKPF for print list in  MB26
    MB_CF001                                Customer Function Exit in the Case of Updating a Mat. Doc.
    BADI
    MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
    MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
    MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
    MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
    MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
    MB_RESERVATION_SCR                      Screen BAdI for Retrofit DFPS
    MB_RESERVATION_UPCHD                    BAdI for Creation and Changing of Manual Reservations
    MB_RES_BAPI_CHANGE                      BAdI: Execution of Changes to Reservation Fields
    MB_RES_BAPI_CREATE1                     BAdI: Adoption of Customer's Own Fields as Reserv. Fields
    MB_RES_BAPI_DETAIL1                     BAdI: Display of Customer's Own Fields in Reservations
    MB_STOR_LOC_BADI_GTS                    BADI to Check and Change Storage Location (GTS Fct. Only)

  • Enhancement for MB1C/MB1A before creation of an Accounting Document

    Hello everyone,
    Actually I want to get the material document number(MBLNR) before the creation of an accounting document when using the transaction MB1C or MB1A.
    I will have to use the value 'MBLNR' to update a field during the creation of an accounting document(the field SGTXT should be updated with the MBLNR).
    I have already tested the following BADI's which provide me the value of the material document number:
    - MB_DOCUMENT_BADI  (BAdIs During Creation of a Material Document)
    - MB_DOCUMENT_BADI_SAP (BADI for Creation and Changing of a Material Document)
    and I am using the BaDi 'AC_DOCUMENT' to update the required field with the material document number(MBLNR).
    The problem is that the BADI's 'MB_DOCUMENT_BADI ' and 'MB_DOCUMENT_BADI SAP' are call after the creation of the accouting document(after the BADI 'ACDOCUMENT') meaning that I can't used these BADI's as the value MBLNR is not available before.
    My idea was to export the value to memory ID before the creation of accounting document and import the value in memory ID in the BADI's 'AC_DOCUMENT' to update the field SGTXT.
    I am currently looking for other enhancements or BADI's which can help me to solve this issue.
    After much research on the internet, I did not succeed in finding a suitable hint which can help me.
    I would be grateful if someone could guide me(even a small hint will help me a lot as am I am new in the world of BADI's) on how to find a suitable way to get the document number(MBLNR) before the creation of an accounting document(before calling the BADI 'AC_DOCUMENT').
    Thanks a lot in advance for you help.
    Kind Regards,
    Bryan

    Hi
    I had a look through the program and found an enhancement spot ES_SAPMM07M available through out. Sadly i am not able to create a material document in my system some master data issue but there are various enhancement points in this enahcmenet and you need to debug on save and find the right enhancement point to export the value.
    Put a break point in the following includes which have only one subroutine in them
    MM07MFF9_F_SEGMENTE_BEWERTEN
    MM07MFF9_F_SEGMENTE_ERSTELLEN---> In this accounting item are created. If stops here and in debugger change the value if it works then there are various enhancement spot for the same.
    MM07MFF9_F_SEGMENTE_ERZEUGEN
    MM07MFF9_F_SEGMENTE_GENERIEREN
    Hope it helps
    Nabheet
    Edited by: nabheetmadan09 on Feb 1, 2012 3:49 PM

  • Additional Items via Enhancement on MB1A / MB1B / MB1C - Update of Accounting Documents

    Hello all!
    Please, I'm in need of help from community.
    I am working on a Project For México. It's a doubt that has arisen from a functional request.
    They want that we create a development that might check the materials inserted on MB1A / MB1B and MB1C transaction.
    If these materials meet with the functional requirements, then new materials must be inserted at this same document, correcting it.
    We already have searched for User-Exits, BADIs and Enhancement-Points, and our position at the moment is that we already achieved to input the material into the material document, but those new lines aren't been recognized on subsequent Accounting Documents, that are created after the material document and that can be viewed on MB03 transaction, into the material document.
    Anyone has any clue if it's possible to modify Material Documents through Enhancements/BADIs/Exits, adding new lines of materials (XMSEG), and grant the subsequent creation of accounting documents?
    Thanks in advance!
    Some Points that we already tried, but without success:
    EXITs : MB_CF001,  MBCF0002 and  MBCF0005
    BADIS: MB_MIGO_ITEM_BADI, MB_MIGO_BADI, MB_CHECK_LINE_BADI, MB_DOCUMENT_BADI_SAP, MB_DOCUMENT_BADI
    Enhancements in following programs: MM07MFJ1 and MM07MFB9_BUCHEN_NUMMERNVERGABE

    Hello Srilakshmi,
    Thank you for the response, but unfortunately the BADIs you've mentioned don't allow me to modify Material Data tables, such as MSEG and VM07M.
    MB_DOC_BADI_INTERNAL is only for SAP use, and MB_DOCUMENT_UPDATE parameters are Importing only.
    Regards.
    Thiago

  • Cost Center & GL Account search not working.

    Hello all,
    I am having the following problem while creating a shopping cart, at the Cost Assignment (item level). When I click on the binoculars for searching CC or GL Accounts, i get the following message: "Display not possible (inconsistency in the input help)".
    Now, I've researched and tried every possible suggestion:
    1. Make sure the requester has permissions BBP_FUNCT/value: BE_F4_HELP, and S_RFC/value:*   (SU01), among many others.
    2. I have assigned to the requester the respective roles in the organizational structure.
    3. Changed the RFC user (from SRM to R/3) from type "communications" to dialog. This user has SAP_ALL in the backend system.
    I have run out of ideas of what might be the problem. I've searched through the forums and used all of the ideas mentioned above, but the problem is still there.
    Any help will be greatly appreciated.
    Regards,

    Hi
    Which SRM version are you using ?
    Please refer to the following SAP OSS Notes.
    <u>Note 656633 - Search help requires dialog users
    Note 746788 - Back-end system search help for cost center
    Note 673390 - Incorrect destination determined for search help
    Note 550052 - EBP 4.0: Preparation for back-end input help in EBP</u>
    Hope this will help. Do let me know.
    Regards
    - Atul

  • Could not changed cost center field in document type RE - FSG

    Dear Experts,
    I would like to change 'cost center field' in act document type RE (invoice receipt) through transaction FB02
    I have changed the field of 'cost center' in field status group in OBC4 and OB41 (posting key 50 and 86)
    The field staus group both in OB41 and OBC4 are already set as 'optional entry' but field of cost center is still could not be changed/edit (grey area).
    Kindly advice
    Thank you.

    Hi Chandra,
    Can you please details the coding part if you can remember ..so that would be helping me lot...Since it's production issue , we have implement immd.
    Regards,
    Lalit
    Edited by: Lalit  Sharma on Dec 24, 2009 6:45 AM
    =======================
    This problem can be closed. I got the note.
    Edited by: Lalit  Sharma on Jan 12, 2010 12:50 AM

Maybe you are looking for