MBA 2013 Set delete key to actually delete in windows?

I have a macbook air 2013 and use it to run windows 7 for work via bootcamp, and os x for play and for my wife to use as well (she's a mac person).
Whats driving me nuts though is the delete key in windows seems to only be able to be set to "back" unless you hold down the fn key at the same time, then it will delete. But I use the delete key to actually delete dozens or more times per day and I'm hoping there is a way I can change the behavior to always delete without needing to do the fn key as well.
Is there a way to do this?

Hi mcdonsco12345,
If you are having issues with key behavior or keyboard mapping in Windows under Boot Camp on your Macbook Air, you may find the following article helpful:
Boot Camp: About keyboards and key assignment for Microsoft Windows
Regards,
- Brenden

Similar Messages

  • How to set Delete Rule to SET NULL while designing relational model .

    Dear All,
    Am new to SQL Developer Data Modeler and was doing some relational and logical design using Data modeler and i want to generate DDL script, while doing i was struck up with this issue.
    I have two table and tried to give Primary key and Foreign key relationship, in foreign key table i want to set the Delete rule has SET NULL, but it is not found. I have other three options like CASCADE, RESTRICT,NO ACTION. Whereas in logical design i can find SET NULL, NO ACTION and RESTRICT....
    But the DDL script is getting generated based on Relational design , i want to set foreign key has SET NULL in delete rule how to accomplish that?
    Please help me......
    Thanks in Advance
    Ramkumar.S

    Hi Ramkumar,
    If you unset the Mandatory property on the Foreign Key, you should then be able to set the Delete Rule to SET NULL.
    David

  • What are the Pre-requisite to set Deletion Flag for Maintenance Order ?

    Hi Gurus,
                  Pls give me what are the pre- requisite to set the deletion flag.
                  I want to set deletion flag to some Maintenance Orders which are with notification, but deletion flag - SET,RESET Indiacaors are inactive.    
                  Following are my observations-
                  1) Order is not yet released.
                  2) No actual Cost is with the order.
                  3) No PR and POs are with the Order.
    Pls guide me.
    With best regards,
    narendra

    hi
    you can put the deletion flag only when the order has the status CLSD or the balance of the order must be Zero
    you can refer the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e65a0462a11d189000000e8323d3a/content.htm
    regards
    thyagarajan

  • 'Set' Deletion Flag is Disable

    Hi All,
    Would like to ask how can enable this 'Set' Deletion Flag 'Button' to enable back. After upgrade to ECC5 to ECC6, this button have become grey out.
    Thank you.

    Hi Jogeswara,
    Actually why user do the set deletion flag due to created warranty order is cancelled without any (operation confirmation-IW4X) and (component consumption-MIGO/MBXX). So the current practice will allow Technical Complete to set deletion flag.
    However current practice only do the business complete by monthly using CO99.
    Mind to share more information here
    Thank in advance on knowledge sharing.
    Trevor Wong.

  • Follow up action to set delete flag after UD (QS41, QS51)

    Hi all,
    If user give UD as 'not good' for Equipment (eg Vernier Caliper) then he has to set delete flag for maintenance plan no and Equipment no through IP02 and IE02 respectively
    now he want that, above delete flag should set automatically after giving UD so particular maintenance plan or equipment should not release in future.
    I got one follow up action 'QM_PM' in transaction QS51 due to this after giving UD for Inspection lot, plan get technically complete (TECHO)
    so how to make changes so i'll achieve above functionality
    plz tell me about catalog, follow up action, QS41
    thanks....

    Hi all,
    i got one solution on which i am working
    Steps:
    1.The solution is to use the User Exit namely QEVA0010 and use the logic as mentioned below.
    2. Test and use the above mentioned user exit.
    3. The first condition should be checked for Inspection Type - 14 and for UD code NG.
    4.Logic to be used To set the deletion flag for the Equipment.
       Go to Table QAPP - Pass inspection lot Number and get the Equipment no.
       Go to Table EQUI - Pass Equipment no and get OBJNR  
    Go to Table JEST - Pass the Objnr - The value for deletion flag status is active is I0076 and the value for deletion  flag inactive is I0320.
       In order to set the deletion Flag,use help of FM - STATUS_CHANGE_INTERN to code.
    5.Logic to be used To set the deletion flag for the Maintenance Plan.
    Go to Table QALS - Pass inspection lot no and get the order no.
    Go to Table AFIH - Pass order no - Get maintenance Plan.
    Go to Table MPLA - Pass the maintenance plan and get the Objnr no.
    JEST - Pass the Objnr - The value for deletion flag status is active is I0076 and the value for deletion flag inactive is I0320.
      In order to set the deletion Flag,use help of FM - STATUS_CHANGE_INTERN to code.

  • Set deletion indicator in purchase requisition account assignment

    Hi Guys,
    Can you please help we with the solution to set deletion indicator in purchase requisition account assignment or close purchase requisition. A purchase requisition of $3.600.000,00 was created through Project system Network-External Processing and it has 2 duplicate network activities and $2.246.577,20 was converted to purchase order then $1,353,423 became the network remaining order plan. A purchase order service entry sheet was accepted and the invoice was created. Now Iu2019m experiencing problem when Iu2019m trying to change WBS element and Network system status to TECO in order to remove the remaining order plan of $1,353,423. Iu2019m getting error message number:06411 the procedure I have follow to correct the error is to reduce quantities in the account assignment item and delete superfluous account assignment by setting deletion in each case but I cannot do that because the fields are grey
    Regards
    Sandile

    Hi,
    please check first if the report ZMO_CORRECT_EBKN  from note 739004  can correct the problem.
    I would like to recommend you to check also the note 796973 whether the correction is avalilable in your coding, it should solve the issue.
    In case the problem still persists, please open a ticket to get help from the primary support in area MM-SRV.
    Regards,
    Edit

  • How to set deletion indicator to SERVICE ENTRY SHEET

    Dear Experts,
    Please explain, is it mandatory to set Deletion indicator to Service entry sheet before Start of Archiving Service  entry sheet.
    Also explain Procedural steps to set deletion indicator to service entry sheet.
    Thanks in Advance

    Dear,
    First of all Revoke Acceptacne as
    Entry Sheet --> Set Status --> Revoke Acceptance .
    After that you can delete....but no Invoice must be exist.

  • HOW TO SET DELETION FLAG TO SERVICE ENTRY SHEET ?

    Dear Experts,
    Can anybody explain how to set deletion flag to Service entry sheet created ?
    Service Entry sheet has been accepted and saved, i want to set deletion flag to the Service Entry sheet.
    Thanks in Advance

    Hi,
    Go to ML85 and give your service entry sheet no in Entry sheet data and select "cancel release" check box and give the corresponding release code and execute and save. The release gets cancelled.
    The other way is go to ML81N and give your Po and service entry sheet and click on the icon "cancel release" (reverse arrow mark) give the corresponding release code for cancellation and save. Now the service entry sheet will go to "No acceptance" mode. again go to the change mode and select the line item and delete it by clicking on delete icon.
    regards,
    Kannaiah Naidu

  • How to Set "delete from hub and server" for each account

    How can I set "delete from hub and server" differently for each account?
    I have 3 emails (2 shared, 1 personal).
    the personal is a 'hotmail' account which has device set to 'sync email', 'push', and 'Use SSL'.
    it will only sync one way (from desktop to device).
    I cannot set the global setting on the device to "delete from Hub and server" without affecting all accounts.
    I do not want to have to confirm delete on every item.
    previous to the 10.3 update this was not an issue.
    am i missing something? or is this another step backwards?

    The only other way would be to set it to prompt every time you get an email. Yeah, I know that defeats the purpose.. I guess in this aspect it is a step back

  • Setting deletion indicator/Flag for an operation in production order

    Dear All, Hi
                     How to set deletion indicator/flag for an operation in a production order. I don't want to delete the operation as such. Please help & suggest.
    Ragards,
    Shaiz

    Hi Shaiz,
    I hope the requirement is just like you posted earlier as in case of component deletion.
    Here in this case also the behaviour of the order remains the same.
    So you can go for release the order as soon as the order gets created, your both the requirements can be fullfilled.
    Also you havn't provided the exact feedback on the solutions offered by all of us, on your last query.
    Request you to give detailed input on the same.
    Hope thish helps you.
    SmanS

  • Set deletion flag on process order.

    Hi Friends,
    My requirement is i want to set deletion flag on process order.
    For this system gives error as
    1. System status CRCR is active (ORD 93000112)
    2. System status ORRQ is active (ORD 93000112)
    Here i have solve the problem number one through transaction code BS22 (i.e. under System status I0241 -CRCR , previously LKZS - Set deletion indicator & LVMS -Mark for deletion was maintain as Forbidd now i have made it under No influence )
    after saving this customization system give only error two ( System status ORRQ is active (ORD 93000112)
    Same way when i try to find ORRQ but here i havenu2019t found  ORRQ.
    Could you plz help me.
    Best Regards,
    Parag Save.

    Dear,
    The system sets this status when you release the order, provided that the Order record required indicator is set in the order type-dependent parameters (see Customizing for Process Order)....
    This setting is there in SPRO....
    Production Planning for Process Industries - Process Order-Master Data-Order-Define Order type Dependent parameters...
    In this you set the option Order record Required....
    Requirements are that the process orders are settled, associated PI sheets, inspection lots and any linked purchase orders are complete.
    Following are prerequisites for closing a process order
    1 The order must have the status Released (REL) or Technically completed (TECO)
    2 The order balance must be 0
    3 There can be no open purchase requisitions, purchase orders.
    4 There can be no future change records from confirmation processes.
    .Now Calculate Overheads using Tcode : KGI2 - Individual Processing
    CO43 - Collective Processing
    Step to be follow,
    1.Calculate WIP using Tcode : KKAX - Individual Processing
    KKAO - Collective Processing
    2.Calculate Variance by using Tcode : KKS2 - Individual Processing
    KKS1 - Collective Processing
    3.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
    CO88 - Collective Processing
    Please refer this thread also,
    https://forums.sdn.sap.com/click.jspa?searchID=17422319&messageID=5934846
    The transaction COA5 (Archive Administration Preprocessing).
    This will allow you to set the deletion flag
    Hope this helps.
    Regards,
    R.Brahmankar

  • What is the BAPI for setting "deletion flag" in IW32?

    What is the BAPI for setting "deletion flag" in IW32? Thanks!

    Hello
    There seems to be no BAPI to set deletion flag for MO.
    Quick Approach:
    You can copy an existing BAPI module BAPI_ISUSMORDER_SETSTATUSTECHN, for example, to Y_BAPI_MORDER_SETSTATUSDEL, and then edit this copy
    change the code in the existing lines for screen 3000
    PERFORM BDC_DYNPRO USING 'SAPLCOIH'      '3000'.
    PERFORM BDC_FIELD  USING 'BDC_OKCODE'    'LVMS'. (Instead of current 'ARCH')
    It should hopefully work.
    fyi: The orders can be set with Del flag only when they are in CLSD status
    Rgds
    Kartik

  • How to set deletion flag in Production order item level

    Hi Friends,
    I have a requirement like...
    Suppose production order conatians 100 items. now i want to set deletion flag for 20 items only.
    In Co02 t.code deletion check box is disable mode.
    There are nearly 100 production orders .i have to write the program....
    Is there any BAPI or other way to meet this requirement.
    Can you please help me..

    Also, You might want to have a look at the BAPIs like BAPI_PRODORD_SET_DELETION_FLAG which are used to set the deletion indicator but it appears to me the deletion flag can only be set at the header level using these BAPIs.
    Please have a look at SAP business object BUS2005 methods from transaction SW01 for more Production Order related BAPIs.
    One more thing ... since you mentioned that in CO02 the deletion indicator is greyed out, then it might mean you are missing the authorizations to set the deletion flag. Please consult with your Authorization (BASIS) administrator. As a hint, the authorization object here is C_AFKO_AWK.
    Cheers,
    Aditya

  • Order status ORRQ is active error when setting deletion flag

    Hi all.
    We couldn't able to set deletion flag in production order by the following error message
    System status ORRQ is active (ORD 1008458)
    This was caused due to order record required.So we tried to store thro T-code:COPA.But when accessing, No orders were found.
    Please guide to correct the error.
    Thanks
    Bhuvan

    Hi Bhuvan,
    Refer the below discussion and do accordingly.
    ORRQ  Status Process Order | SCN
    Thanks & Regards,
    Ramagiri

  • Set deletion flag

    Hi gurus,
    I have a set of orders which needs to set the deletion flag. But they have issues so that it gives an error. they are very old set of orders. When we run the WIP run it goes through these orders. is there way we can set the deletion flag to these order. Please update us its a very urgent requirement.
    Br,
    PubuduS.

    Hi,
    That can not b the case..
    Try to set the CLSD/DLFL manually and check the error message, if the error message is same then there must be some entries in these transcaction codes..
    Regards,
    Siva
    One more additionl point:
    If there is any associated Purchase Orders are there with reference to the Production Orders (In case of External Processing Operation), until the Pur.Orders is not taken care properly, you will get this Message.
    Next Steps:
    Execute the Program : PPARCHP1, in the test mode, try to set deletion flag, you will come to know the reasons for...
    Regards,
    Siva
    Edited by: Siva Kumar M on Jan 12, 2012 7:52 AM

Maybe you are looking for