Mbean for creation of MultiDataSource

Hi,
I need some help for MultiDataSource.
I know how to create the DataSource.
by using
mbeanhome.createAdminMBean(beanname, beantype, DomainName);
Can anyone tell me are MultiDataSource are created in the same way.
if yes what is the Bean type and also the mbean that this createAdminMBean will be returned.
Also i have seen some reference of JDBCDataSourceParamsBean.
How to use it to create MDS.
Regards
Edited by: user774261 on Aug 25, 2009 7:30 AM

hello,
have a look here. a lot of wlst scripts already come with wls samples:
C:\Oracle\Middleware\wlserver_10.3\samples\server\examples\src\examples\jdbc\multidatasource
rgds,
b.
user774261 wrote:
Hi,
Can anyone tell me are MultiDataSource are created in the same way.
if yes what is the Bean type and also the mbean that this createAdminMBean will be returned.

Similar Messages

No key field found for creation of DataSource - Classification Datasource

Hello,
While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
System response
A DataSource cannot be created without key fields. The action was cancelled.
Procedure
Check whether you have selected the correct basis DataSource and object table. For more information, please see SAP Note 569849.
Do you know what can be the problem?
Thank you and regards

Hi Alberto,
plants are a special case. The key which is used for the classification
of plants (object type BETR) is not the same as the key which is used in
datasource 0PLANT_ATTR.
BETR has key LOCNR (Site). That's a customer related to a plant. The
customer number will be extracted in field LOCNR.
0PLANT_ATTR extracts the plant in its key field WERKS.
Transaction CTBW and the generic extraction program for classifications
don't know the relationship between LOCNR and WERKS. So they cannot map
them.
I do recommend a solution which would add the mapping between
LOCNR and WERKS:
1. Create please the classification datasource as intended, but use
datasource 0RT_LOC_MGR_ATTR as basis datasource. It's the only
datasource of the content where LOCNR is a key field. So
0RT_LOC_MGR_ATTR is used as a dummy here, to allow transaction CTBW to
create the classification datasource. It's not necessary to extract
data with datasource 0RT_LOC_MGR_ATTR.
2. Extend please the extract structure of the created classification
datasource. Add please field WERKS using component type WERKS_D. Make
this field visible.
3. Fill field WERKS in the extractor user exit EXIT_SAPLRSAP_002. WERKS
can be read from table KNA1 by using the customer number extracted to
LOCNR to select on field KNA1-KUNNR.
4. Transaction CTBW_META on the BW system isn't able to append the
characteristics from the classification datasource to infosource
0PLANT, because the keys are different. So create please a new info
source with CTBW_META. This allows CTBW_META to create the info objects
for the characteristics used in the classification datasource.
5. Add please the characteristics used in the classification datasource
to infosource 0PLANT manually. You will find the info object names of
the characteristics by looking up the characteristic datasources which
are assigned to the classification datasource in transaction CTBW. From
these names you can derive the info object names:
1CL_A... -> C_A...
6. Disconnect the infosource which has been created with CTBW_META from
the classification datasource.
7. Connect please the classification datasource to infosource 0PLANT
Use following info object:
info object   field
0PLANT       WERKS
The info object names for the characteristics are explained in step 5.
8. Add an infopackage to infosource 0PLANT for the classification
datasource.
Now the extraction of classifications of sites should work.
Best regards,
Rolf
P.S. I saw the system messed it up and doesn't display any new and empty lines. Sorry, I hope you still can read it.
Edited by: Rolf Doersam on Mar 26, 2010 6:56 PM

Need procedure for creation of BW Roles, Assigning Queries,Publishing Roles

Hi Experts,
Could you please let me know the procedure for creation of BW Roles, Assigning Queries,Publishing Roles in Business Explorer (BEx - BW 3.5)
Thanks in advance,
Andy

Hi,
Creating BW Roles
http://help.sap.com/saphelp_nw04/helpdata/en/52/6714b6439b11d1896f0000e8322d00/frameset.htm
Assigning Queries
After creating the query, save the query to a role from the query designer.
Publishing Roles in Business Explorer
https://websmp101.sap-ag.de/~sapdownload/011000358700002894802003E/HowToBIPortal1.pdf
Hope this helps you..!
-Pradnya

IDOC for Creation of Production order and also adding components

Hi ,
I have a requirement like I get the data from a 3rd party system and using that i have to create production orders and also should be able to add more materials in COMPONENTS part of that Production order. I was looking for a BAPI which can handle this process.
And also can any one help me by letting me know is there any Message type available for handling this process of Production order creation and Adding extyra components to it.
I have a message type LOIPRO (for Production Order) and associated function modle CLOI_MASTERIDOC_CREATE_LOIPRO for creation of master IDoc, but not sure can i handle the Components part in this.
Please do send replies ASAP, its very urgent.
Or else atleast suggest me the other ways of doing this .
Also send me any BDC program if anyone has already developed for this.
Thanks
Kumar
Edited by: Phani Kumar Peddagopu on Mar 19, 2008 6:56 PM

Resolved .

Standard New button for creation of bp is not appeared in ic agent bp role's main page.

I have checked in.htm page of ICCMP_BP_MUL_S/BuPaSearchB2B which is getting called in web.
in line no. 45 of .htm page there is condition to check whether new button should be displayed or not, when this condition is true no_bp_create is initial then only new button appears in ic agent.
I have debugged so many times but unable to find out from where no_bp_create flag is populated and in conclusion new button is not appeared .
I think there is some authorization which should be assigned to user for creation of bp so that above said flag (no_bp_create) is not getting populated.
if i am on right track so please let me know which authorization is to be assigned to user so that user can see new button in ic_agent.

Hi Sunny,
The parameter no_bp_create is being set in the do_init_context method of the view controller class of same view but the value is being fetched using a badi.
The authorization to create BP can be enabled by implementing the BADI BADI_CRM_BP_UIU_AUTHORITY (or enhancement spot CRM_UIU_BP_ENHANCEMENT).
Users can be authorized to create/edit data for different UI components using this badi.
In this badi put the condition for the application name may be as (based on your scenario or explore more) cl_crm_ic_bp_constants=>gc_bp_create OR OR cl_crm_ic_bp_constants=>gc_bp_edit and set the value of parameter cv_not_allowed = abap_false. Then you should be able to see the New button.
Regards,
Shobhit

Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
When I enter the value , it just vanishes. Am I missing something here.?
I need to set export path for PDF generation in Hyperion financial report for batches.

Edit FRConfig.cmd and update
set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
update epmsystem1 to the correct epm instance name
Cheers
John
http://john-goodwin.blogspot.com/

Logic required for creation of PR and PO report

Dear Experts,
I want to create a report which gives the details of internal lead time for creation purchase requisition to purchase order. Well which tables I need to use for this . I know some tables like eban, ekko to join. Can you please give me the correct information. I only want those purchase orders which are created with purchase requisition. I need to calculate how many days taken from PR to PO.

Dear,
PR release date will be found in CDHDR table in CDHDR-UDATE. PO dates you can find as mentioned in replies.
But the problem is the time taking for executing the report. It will more lenghty to read different tables and give you output (if you go for yearly range data). ABAP dump error.
Better, just consult with ABAP team and they can give you a correct solution.
Regards,
Syed Hussain.

List PO pending for creation of Inbound delivery

Dear All,
Please guide is there any standard transaction against which we get a list of Purchase orders which are pending for creation of Inbound delivery.
Though we do monitor the Inbound delivery vide Transaction code VL06I, this transaction is useful only for the Inbounds already created.
S. Kumar

Dear Bijay and Mahesh,
Both the transaction code ME80FN and ME2N gives the list of PO with the relevant confirmation Tab against each item line. It was an useful information. Though the question is still unanswered as my requirement is list of PO's where the confirmation control key maintained but the Inbound delivery yet to be created (i.e. Data with Table EKES - Field VBELN is still blank)
S. Kumar

FM for creation of production order creation

Hi All,
Can anyone tell me the BAPI for the production order creation.
BAPI for creation of production order through CO01 transaction code.
Thanks in advance
Ramesh.

Hi,
Please check this FM CO_ZF_PRODUCTIONORDER_CREATE.
Regards,
Ferry Lianto

Event to use for Creation of a Check box on Warehouse master Form

Hi experts
I have created one check box on Warehouse Master form in AfterMENUClick Event. It works fine if I open the form on Menuclick . But If I open the Warehouse master form by Link button from any document, it does not show the check box. I also want to deactive the checkbox if once it checked. So, I do some coding in Data_Load event. It also works fine If I open the form by Menu click. But if I open the form by Link button it gives error " Invalid Item Id ".
So I want to know which event I should use to create the check box and which Event I Should use to Deactive the Check box

Thanks Nagy for quick reply
I use the following code for creation of check box
<B1Listener(BoEventTypes.et_FORM_LOAD, False, New String() {"62"})> _
        Public Overridable Sub OnAfterFormLoad(ByVal pVal As ItemEvent)
            Dim ActionSuccess As Boolean = pVal.ActionSuccess
            Dim form As Form = B1Connections.theAppl.Forms.Item(pVal.FormUID)
            'ADD YOUR ACTION CODE HERE ...
            Dim oForm As Form
            Dim oMatrix As Matrix
            Dim oItem As Item
            Dim sysItem As Item
            Dim BinCheck As CheckBox
            Dim BinLabel As StaticText
            Dim cmbBinCode As ComboBox
            oForm = B1Connections.theAppl.Forms.ActiveForm
            oForm.PaneLevel = 1
            sysItem = oForm.Items.Item("2000002010") 'Excisable check box
            oItem = oForm.Items.Add("BinChk", BoFormItemTypes.it_CHECK_BOX)
            oItem.Left = sysItem.Left
            oItem.Top = sysItem.Top + 20
            BinCheck = oItem.Specific
            BinCheck.Caption = "Bin Enabled"
            BinCheck.DataBind.SetBound(True, "OWHS", "U_BinEnabled")
        End Sub
It gives error on sysItem = oForm.Items.Item("2000002010") line Invalid Item Id
Plz check and tell the problem
Regards
Gorge

BAPI for Creation of inspection lot

I have two scenario:-
1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
YPB

2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
Regards
Sujit

Need User Exits for Creation of Delivery and for Posting Goods Issue

Hi,
I need User Exits for
Creation of Delivery
Posting Goods Issue
I need to make some checks regarding customer license expiration and if checks fail, I need to stop Creation of Delivery and Posting Goods Issue.
Thanks in advance,
Will reward,
Mindaugas

In the delivery you can use userexit USEREXIT_SAVE_DOCUMENT_PREPARE to make your checks and send an error message to the user in case they fail.
You can find this user exit (form routine) in include MV50AFZ1.
Hope that helps,
Michael

Problem for creation of PO for different company code

I have problem for creation of PO using ME21 for different company code.Order is not created.
Please give reply it is urgent.

Hi Mansih,
I don´t understand what is your exact problem, as I don´t see any company code being specified. But maybe you should check in XK03 that the vendor master data is created for this company code/purchasing organisation!
Have a nice day!

Error occurs, BAPI_ACC_DOCUMENT_CHECK for creation of accounting document

Hi Experts,
I am creating accounting document using BAPI_ACC_DOCUMENT_CHECK Bapi F.M. Profit segment number is mandatory ( T.code KEDR) for G/L account 411103 .when i am using this G/L account for creation of accounting document, occurs below error message.
1.Field Prof. Segmt is required field for G/L account 0495 411103
2. Account 411103 requires an assignment to a CO Object.
Please let me know how i can resolve this problem using with BAPI.
Thanks
Jaya Reddy

The BAPI you have mentioned is used to check whether a posting to accounting is possible. You can use the Bapi "BAPI_ACC_DOCUMENT_POST" for posting accounting documents. Depending on the GL account configuration you have to pass PROFIT CENTER / COST CENTER to the BAPI.
Regards
vinod

Error during create CR for MDGC "Enter a relevant role for creation of customer master data"

Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,

Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks

Mbean for creation of MultiDataSource

Similar Messages

Maybe you are looking for