MBP to HDMI TV and HDMI receiver

Hello: I want to use my plasma TV as my monitor; do I need a DVI to HDMI cable? Also, I am going to stream my iTunes to my receiver and want to be able to have the MBP wherever I want. Is Express the best way to go, connected with a digital optical cable? Thanks

If you are trying to connect to an HDMI port on the receiver or TV, then yes, you should get a DVI to HDMI cable. DVI does not carry audio, so you will also need an audio cable running from your MBP to the receiver. I bought really long ones at monoprice.com so that the laptop could sit on the living room table.
I have not used the Express so I can't comment on that, other than I know people that use it and love it.

Similar Messages

  • I just bought apple tv and would like to set it up for my family for christmas.  i have a samsung tv and yamaha receiver.  where do i plug in  hdmi?  i assume into receiver but not sure.  also, plug is on back of receiver so much get behind all equipment

    i just bought apple tv and would like to set it up so it works right away.  i have samsung tv and yamaha receiver.  do i plug hdmi into receiver?  i assume plugs are in back of machined so i have to get behind all electronic equipment?  does that make sense?

    Welcome to the Apple Community.
    If your receiver is connected to your TV by HDMI and has a spare HDMI input port, then yes plug the HDMI cable from the Apple TV into your receiver.
    If that's not possible the HDMI lead from the Apple TV can go straight to the TV and you can connect the receiver to the Apple TV with an optical audio cable.

  • IMac 27" (Late 2009): getting audio to HDMI receiver via mini DisplayPort

    I just got my first iMac 27" and I'm in the process of integrating it into my home theater system. Here is my setup:
    iMac 27" connected to HDMI receiver (Yamaha RX-V1800) via mini DosplayPort, using miniDP-to-HDMI adapter + HDMI cable
    Optoma HD20 video projector connected to HDMI receiver (HDMI out) via HDMI cable
    I have Windows 7 installed via Bootcamp 3.2, so that I can take advantage of Windows Media Center. With the above setup, I am not getting audio or video signal to my receiver and video projector when I'm using Windows 7. However, when I am in OS X environment, I can get both video and audio signal to my receiver and video projector, and either mirror or extend my video diplay. When I do plug in my iMac straight into my video projector or LCD monitor with built-in speakers while in Windows 7, I get both audio and video output. So why doesn't it work -- and only under Windows 7 -- when the signal goes through the receiver?
    My immediate thought was that it must be something about the receiver, but since the setup creates no problem under OS X I don't think it is. Could it perhaps be the Windows driver for mini DisplayPort, because it looks like iMac is not 'recognizing' my receiver and therefore not establishing connection? Is there a driver of fix available that takes care of this problem?
    Thanks!

    I've tried a few times and it hasn't worked so far...
    23" Cinema Display (ADC) connected to Apple's ADC to DVI adapter/power box then connected to Apple's DVI to mini Display Port adapter.
    Trying to output extended desktop from iMac to 23" Cinema Display.
    No signal or anything on the 2nd monitor so far.
    USB port on Cinema Display works with the setup.
    Checked system updates and all up to date as of 01-10-2010.
    OS X 10.6.2 build 10C2234

  • Connecting an IdeaPad U400 to a HDMI receiver

    Hi group.  I have a U400 with all the latest drivers running on Windows 8.  I can connect the laptop to a projector/monitor directly, but I can't connect to the projector/monitor via an HDMI receiver (Denon 889).  The laptop can't detect the external display.  I've tried changing to various resolutions to no avail.  I've also experimented turning on the devices in different order.  I've tried this under Windows 7 as well with no success.  I have no problems connecting another laptop (Acer 5920G) to the HDMI receiver.
    Does anyone have experience connecting a U400 (or U series laptop)  to an HDMI receiver.  Please share any experience you may have.  Thanks in advance.

    JKinnicutt wrote:
    Still no luck. 
    I updated the BIOS and the video drivers and it's still not working. 
    Pressing Fn F4 opens the selection for how I want to view the external monitor. And clicking something makes the laptop screen go black and then back on. (Unless I select Second Screen Only, then the laptop screen stays black). But the external monitor never displays anything.
    What is your operating system?
    Follow this document -
    Connecting a Monitor, Projector or TV (Windows 8)
    Go through Page 23, 24 in this manual
    NOTE:
    To see the computer screen image on an external VGA monitor or projected for a presentation, connect a monitor or projector to the computer's VGA port.
    To connect a monitor or projector:
    1. Connect the VGA cable adapter to the HDMI port.
    2. From the monitor or projector, connect to the VGA port on the computer
    3. Press f4 to alternate the screen image between 3 display states:
    ● View the screen image on the computer.
    ● View the screen image on the external device (monitor or projector).
    ● View the screen image simultaneously on both the computer and external device.
    Each time you press f4, the display state changes
    Additonal Read: Connecting a TV or Monitor to your Windows 7 PC using HDMI
    HD Graphic drivers need to be updated only if HDMI to HDMI is port is connected. 
    If nothing works, change the adpater and cable and see.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • MBP Retina HDMI Problems

    Hi there,
    I have a late 2013 MBP with retina desplay, and am experienceing somse issues with connecting it to the TV via HDMI cable. On initial connection, the screen is recognized and all is well, but if there is even the tiniest movement in the connection, the computer will stop recognizing the screen. when this happens, nothing works: not disconnecting and reconnecting the HDMI cable, not playing with the monitor system config - nothing. Sometimes this happens even without anything being moved - the computer just seems to "lose the signal". The cable works well with other computers. Also, once this happens, the computer loses its sound completly. output in sound settings is set to internal speaker, nothing is muted, and still no sound. This is all fixed after a restart.
    This has happened from day one.
    Do you think I have a HW problem? any suggestions?

    nope.  It's video output only.  To do what you're talking about, you'd need a video capture device, like this: http://www.blackmagic-design.com/products/intensity/

  • MBP to HDMI looks fuzzy

    Why does the font on my 32-inch Samsung 1080p LCD TV look fuzzy when it is connected to my MBP via HDMI to Mini Display Port? It is only when it is connected to the MBP. When it is connected to my PS3 it is crystal clear. How can I fix this if at all possible?

    Apple menu > About this Mac > More Info > Model Identifier
    or you can look it up by serial number:
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html

  • I clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup dis

    i clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup disc is full (activity monitor shows 3.99 of 4 GB used) and then another stating the download had not occurred due to the disc being full. most of the tunes still appear to be in the cloud but the disc is said to be full, spent a good period of time trying to investigate what has happened but failed...I'm not well up on all of this as an old chap so any help would be wonderful.....

    unclefossil wrote:
    Thanks Michael, what is the best way of backing up, should buy a cheap standalone external hard drive rather than relying on the Time Capsule which is quite sensitive...
    If you read the link I provided you'll get an idea of one way to maintain a backup of your music files, use Time Machine, and not take up as much room on the internal HDD/SSD.
    unclefossil wrote:
    i live in the Scottish Highlands where Broadband is frequently intermittent disrupting backups.
    Your internet connection speed has no effect on Time Machine/Time Capsule backups. Since that is all done locally, over your wireless network you actually do not need an internet connection at all.
    unclefossil wrote:
    Also I wondered if I could increase the memory on the setup disk by replacing the 4GB card already in the MBP with 16GB cards, if I upgraded would that affect anything I have stored already like my iTunes?
    You're asking about the computer's RAM. Increasing that will not increase the size of the internal storage available to the computer. You'd need to replace the HDD/SSD of the Mac, which, depending on what model you have may or may not be possible (with new models of Macs).

  • I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

    Time capsule has been working perfectly for months.
    Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
    Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
    I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

    What OS are you running??
    It is very typical Yosemite issue.
    1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
    From my screenshot you can see the TC address is 192.168.2.57
    It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
    2. In Finder use Go, Connect to server.
    Type in SMB://192.168.2.57 (replace with IP you discover).
    If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
    This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
    Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

  • I am trying to uninstall itunes and I received a message: The feature you are trying to use is on a network resource that is unavailable.

    I am trying to uninstall itunes and I received a message: The feature you are trying to use is on a network resource that is unavailable.

    Refer this link here:
    https://discussions.apple.com/thread/4029492?tstart=0

  • I have installed latest update for itunes but it will not install and I receive a message Apple Mobile device failed to start. I have uninstalled and reinstalled itunes but have the same problem. I am using windows 7 and internet explorer

    I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!

    Hi there willjay3976,
    You may find the troubleshooting steps in the article below helpful.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W. 

  • TS1702 I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem on ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).

    I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem with link in email on my ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I hav

    I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I have been using Apple products for years, always touting their reliability and customer service. I am not a techie, I just want to be able to do what I do on the computer and Apple always fulfilled my needs. Now I am told because of some operating system gobbledygook, I have to go out and purchase new software to use Word. This is despicable. I see no particular benefit to using Lion, but I do see a lot of detriments. Apple now seems to have turned into Microsoft, making software obsolete so they can make more money and to **** with the customer. You can be sure that my next computer will be a PC. I have completely lost confidence in Apple.

    I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
    I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
    As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

  • One sender and two receiver

    Hi All,
    I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
    Thanks
    Michael

    Use xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
    /people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service

  • I had the "WhatsApp" hack on my email, changed all my passwords (gmail, apple ID, etc.) but now I can't send messages through my mail app on my laptop even though it's signed in to my gmail account and is receiving messages.. How do I send msgs again

    I was hacked by the "whats app" email and had changed all my passwords (gmail, apple ID, etc), my mail app on my laptop is signed in to my gmail as per usual and is receiving mail but not sending mail. How do I get it to send mail again? Also is it ok to have the same gmail account used (as my mail and applied ID) after the hack or should I completely reset everything? Ie. get a new email address…So frustrated and confused, please help!!

    It's normal for your phone number to be grayed out in Settings>Messages>Send & Receive under "You can be reached by iMessage at" on your phone because it can't be changed.  If you phone number is listed there it should also be listed further down under "Start new conversations from".  If you tap your number there to select it, your messages will be identified to others as coming from your phone number, not your email address.
    Is you phone number listed there on your phone?

  • How can I stop my childs ipod and ipad receiving same messages

    how can I stop my childs ipod and ipad receiving same messages, they were both set up to the same email account and itunes account. I have just set up a new itunes account for my daughters ipod and changed hers to the new account but my ipad still seems to be getting the same messages from her ipod which is what I wanted to avoid, any suggestions ?
    Mel X

    i  changed  itunes and email password. and afew others  will that stop the text messages form going to it.

  • I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    Same issue here,  previously did work perfectly

Maybe you are looking for