MBP won't recognize passwords; reboots in safe mode.

1.5 year old MBP started typing capitals without Caps lock on.  I shut down and the MBP came up in safe mode but wouldn't recognize my or my wife's password.  Please help.  Wife already lost hard drive on a MS laptop this week...it's been a tough week.

Steve, you were exactly right.  Some salt caused the shift key to stick which was the proximate cause of the problem.  Good Job Buddy.
TownRidge.

Similar Messages

  • MBP won't recognize tethered Verizon LG handset

    I am traveling through the US for a few months and have an LG handset that can be tethered as a modem to a computer.
    When I was given the handset a few months ago, I plugged it into my MBP (running Leopard .8) and the network preferences immediately recognized that the handset was connected although I couldn't do anything with it at the time.
    I activated the handset today at a Verizon store and have now spent over two hours trying to make it work. My MBP won't recognize the handset. I downloaded the VZ Access Manager software and tried an auto detect but it's also not seeing my handset. It doesn't show up under the System Profiler either.
    What am I missing?
    Thank you,
    Rae

    Never mind; it turns out you need to restart your handset a couple of times. It's still not working, but at least the computer recognizes the handset is there, so that's progress.
    Rae

  • After reinstalling MAC OS 10.6.8, config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with fsck, but after the steps to be taken, it says fscs not done, root device is read only

    After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with Command+S and fsck, but after the steps to be taken, it says fscs not done, root device is read only. I also tried to bypass the Mac firmware password by taking one Ram card out and reboot the macmini while holding COMMAND+OPTION+P+R. But no luck. The macmini is not able to see the mac OSX installation CD.
    Please help ??

    f.fromleiden wrote:
    After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot.
    How and where did you change which permissions? And what was the goal?
    Do you have a complete backup of your system? and more importantly data files?
    What happened that prompted the need to reinstall the 10.6.8 update?
    The immediate road forward would be to boot from the optical drive and revert the changes you made.
    What happens when you boot with the install cd and hold down C or hold down the option key?
    [Off topic: I've been to Leiden a few times ]

  • After installing 3.6 FF won't open even in the safe mode, I click on the icon and nothing happens at all

    I installed 3.6 and now FF won't open even in the safe mode. I restored my computer setting back to where I was running 3.5.13 but it still doesn't work...some files must have been deleted when I upgraded that weren't put back even when going back to the older version but I have no idea what to look for or what to do even if I find them. Can you please help me?

    Using system restore can create problems as well as solving them. I have seen system restore destroy a Firefox setup. The installation may be OK but to be sure perform a clean install
    # [http://kb.mozillazine.org/Uninstalling_Firefox Uninstall Firefox]
    # Delete the Firefox [http://kb.mozillazine.org/Installation_directory Installation directory], default location C:\Program Files\Mozilla Firefox\
    # Download the latest version from http://www.mozilla.com/ and install it
    If Firefox still does not start, try creating a new profile folder. Firefox stores user data in a profile folder, creating a new profile will show if the problem is with the old profile. For how to do that see [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows creating a new Firefox profile on Windows].
    If the new profile works, you can copy selected data such as bookmarks and passwords to the new profile. For details see [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox transferring data to a new profile]. Do not copy the preferences file, and it is best to re-install any add-ons.

  • SbRIO (cRIO) reboots into safe mode (software error)

    Hi there,
    I've used the sbRIO-9612 for year on the project, recently it sometimes reboots into safe mode. In MAX I may find the status of the sbRIO is "Safe Mode with software error". Can anyone tell me, how can I find out where is the problem. I have the error log as attachment.
    Regards,
    Wilbur
    Solved!
    Go to Solution.
    Attachments:
    lvrt_err_log.txt ‏51 KB

    Hi,
    I read again the log file. There're something that should help:
    Exception code: 0x00000700
    Thread ID: 0x02E270B8 Thread name: niserial
    Thread stack base: 0x02E270B8 stack size: 32768
    Call Stack:
    0x1de9170+0xe93cc: _dtors () in module niserial.out
    0x1ddd83c+0xdda98: _dtors () in module niserial.out
    0x1dc840c+0xc8668: _dtors () in module niserial.out
    0x1df3a34+0xf3c90: _dtors () in module niserial.out
    0x1db2154+0xb23b0: _dtors () in module niserial.out
    0x1dc6a2c+0xc6c88: _dtors () in module niserial.out
    0x1dc68a0+0xc6afc: _dtors () in module niserial.out
    0x1dc67b0+0xc6a0c: _dtors () in module niserial.out
    0x3dbc80+0x8: Virtual function table for __cxxabiv1::__si_class_type_info () in module 0x0

  • My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    Hello kidmango,
    I am going to have to agree with planb77. Look into other drivers in your computer causing the issue, not just the nano's drivers.
    It is possible that security software is the culprit. Use this:
    iTunes: Troubleshooting security software issues
    You may have to restore your computer to a previous point. From before the issue started. Contact computer manufacture or Windows for steps, or do a search with a search engine.
    I would test the ipod on a known good computer to see if its the ipod is the issue. My gut says no. You can set a reservation at an Apple Retail Store. Apple.com/retail .You can also test a known good ipod on your computer.
    Hope this helps.
    ~Julian

  • Reboot after safe mode

    I rebooted in safe mode (OS-X Yosemite) to troubleshoot a problem (the com.apple.mdworker.bundles issues) and after rebooting in normal mode the App Memory is double than before booting in safe mode. Before App Memory was about 1.5 GB's with the basic stuff open, but after going through safe mode, the App Memory is now around 3 GB's, but there doesn't seem to be anything unusual in the Acitivity Monitor showing the new app memory. It's not a problem since the Mac Pro has 32 GB's but still it's a "Huh?" moment. Any ideas what happened or where to look for clues?

    Sorry, misunderstood. Reboot into Safe Mode and see what it is, then back. Superficially, this means nothing. But you need to do it under the exact same conditions. For example, run no applications or utilities after the reboots (except Activity Monitor.) Many third-party items you may have installed will not normally run in safe mode, and that can account for a drop in total memory usage. Look at the memory info reported in Activity Monitor in order to compare. If there is anything unusual, it should become obviou    

  • My MBP won't recognize my external hard drive

    I have an external hard drive that used to work just fine on my MBP, but now it won't recognize it. When I plug it in (USB), the green light turns on the hard drive, but nothing happens on my MBP. Maybe it is recognizing but not letting me know? I did check disk utility but it's not there either.

    Drives "unmounted" sometimes suffer volume structure damage or similar. Sometimes it's correctable without re-formatting the drive, but not always. Depending on whether or not it contains stuff you want to keep, I'd think you have two choices:
    1. If you don't mind losing what's on it: Reformat the drive (which will erase the contents), using Disk Utility, or just accept the "initialize" option you are offered.
    2. If you want to try to retain the drive's contents, you'll have to try to repair the disk by whatever means available to you. Disk Utility (which is part of the OS, so you own it already), DiskWarrior, and TechTool Pro may be able to detect the drive. If so, try to Repair Disk, Repair Volume Structure, etc. If the disk can't be recognized, you'll probably have to resort to the previous method.
    But if this doesn't work, wait for more advice before doing anything rash, as others may think of things I didn't.

  • Dumb mistake, now mail won't recognize password

    I'm a Verizon DSL customer and use my Apple Mail.app for all my mail. I just was on the Verizon site updating some personal info and saw there was an upgrade for a Verizon/Yahoo deal. I did the upgrade but, like many companies, their set up was not working correctly with my Imac (G4 Imac - 3 years old). After going through the whole set up process and not liking the results, I discontinued the upgrade. It had linked my Verizon account to my Yahoo account. I reverted back by unlinking Verizon from Yahoo on the web based account management page (Verizons page). BUT NOW MY MAIL.APP WON'T RECOGNIZE MY PASSWORD! I didn't change my password! The prompt says:
    "The SMTP server “outgoing.verizon.net” rejected the password for user “(my name)”
    Please re-enter your password, or cancel."
    I've already tried going into my account and typing in my password but it's being stubborn and won't accept it as the correct password!! What happened and what can I do to fix this?
    Vanessa

    Thanks Allan but I tried many times deleting and re-entering my SMPT, no luck. It's funny, I've always been able to access my e-mail on Verizon's web based site, it's the same e-mail that's accessible by my Mail.app. I logged into my web based Verizon mail with my same log-in information that is saved in my Mail.app. I was able to log-in everytime, so my password is still being accepted by Verizon's web based mail. I have a sub account in my Apple Mail.app with different user name but same password and IT IS RECEIVING AND SENDING MAIL. That should be a big clue to those of you who know more about this than me...lol!
    Vanessa

  • Ical won't recognize password

    I recently changed my google password and now ICAL won't recognize it.  I have a macbook pro. 

    iCal
    MobileMe
    Apple Support

  • My iMac won't reboot in safe mode.  Tried shift shift r and all the other options just apple and sinning wheel

    I cant boot my imac in safe mode.  The apple appears and the spinning wheel on low light screen and stays like that.  Waited over an hour. Have used shift and shift r keys and done all the other ways I can find all with same result. This mac has been a problem ever since I installed mavericks.  I have had to reload mavericks on several occasions but this time cant access disc etc.  Any ideas?

    You should still have the original OS disc that came with your iMac.
    If so, pop that into your disc drive and hold down the C key as you reboot. It should be able to run the OS installer from that disc.
    Go into the options/window menu and choose Disk Utility. Verify the hard drive and repair it.
    See if that will help.

  • Mac won't boot properly unless in safe mode

    Recently I updated my MacBook Pro to OS  X Yosemite. I then started the process of the data encryption.
    I don't know what happened, but maybe the encryption failed, because now every time I turn my mac on, it won't boot properly unless it's in safe mode.
    Either it will have a black screen with a visible cursor, or just the desktop with no dock or the bar along the top and no icons, or it does boot up properly, but works extremely slowly. Like if I was to press the apple symbol on the top-right of the screen, it would take 5 minutes to actually open it. Nothing works properly.
    And so I opened up my system preferences, and discovered that the Encryption is stuck on half-finished. But I can't stop it. If I try to turn encryption off it says I have to wait till it's finished. But it never does, the progress bar never moves.
    If I open System Preferences while in Safe Mode, the progress bar for Encryption is grey, and underneath it says "connect to power to continue encryption". But it IS connected to power.
    Have I stuffed my Mac? Is there a way to get it working again?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • ITunes won't run even in the safe mode

    Installed the latest iTunes. It freezes all the time and when closed won't start up again even though it eats up the memory. Itried running it in safe mode and other tips but nothing is working. It now stopped working even in the safe mode. Any kind of solution available?

    Using system restore can create problems as well as solving them. I have seen system restore destroy a Firefox setup. The installation may be OK but to be sure perform a clean install
    # [http://kb.mozillazine.org/Uninstalling_Firefox Uninstall Firefox]
    # Delete the Firefox [http://kb.mozillazine.org/Installation_directory Installation directory], default location C:\Program Files\Mozilla Firefox\
    # Download the latest version from http://www.mozilla.com/ and install it
    If Firefox still does not start, try creating a new profile folder. Firefox stores user data in a profile folder, creating a new profile will show if the problem is with the old profile. For how to do that see [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows creating a new Firefox profile on Windows].
    If the new profile works, you can copy selected data such as bookmarks and passwords to the new profile. For details see [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox transferring data to a new profile]. Do not copy the preferences file, and it is best to re-install any add-ons.

  • Rebooting in Safe Mode, Computer Cuts Off

    Hi, I've tried twice to Reboot and go to Safe Mode(Once) and Safe mode with Networking(Once). Both times the computer shuts off, The first time I did get as far as putting my screen name in and Almost getting to Control Panel and then Restore
    Point and the second time didn't get as far as putting it in before it shut off. I'm on it now and it's fine, just when I do the rebooting, press F8, safe mode, put in password. A Little Background as to why I need to do so. I can't log onto my Administrative
    Account Profile, It keeps saying "The User Profile Service, service failed to logon, User profile cannot be loaded. So I researched many links and websites. I concluded between all of them to Reboot, One said Safe Mode, One said Safe Mode with Networking.
    I tried both, the one with networking was the second time that I didn't get so far at all. May be you know a better way to go about getting to a Restore Point with out Rebooting or maybe you can help me to figure out why it keeps shutting off, both or either
    one would be very helpful. Thanks So Much for your Time In Advance!! I hope I wasn't to repetitive, just trying to be as detailed as possible. :) Have a Beautiful Blessed Day Microsoft Team!!! :) 

    First, this is the wrong forum for general server support.
    Second, if you cannot connect to the User profile service you probably have a network issue not allowing to talk to a domain controller. Is the machine on the network?
    - Slow is smooth and smooth is fast.

  • Updated. See 3 new Qs at bottom...After XP system restore back to earlier FF version, FF won't open, it's in safe mode. How can it be opened out of safe mode? Can precious, previous History be retreived?

    THIS IS A RE-POST OF THE QUESTIONS previously posted, PREVIOUSLY POSTED, now adding a request that 3 new summary questions--at the bottom--be answered.
    NOTE: I specifically need answers to the 3 new, summary Qs now posted at the bottom of the Sequence of Events:
    Sequence of events:
    1) I was using Version 3.6.22 and I needed to
    upgrade to Version 6.0.
    2) Before beginning, I set a restore point in Windows XP so that in case I did not like 6.0, I could go back to the restore point which contained
    3.6.22 and I would stick with that version.
    3) I did not uninstall 3.6.22 but loaded 6.0 on top of it, so to speak, thinking that would save my history and other features such as bookmarks. Opening 6.0 I was horrified to see it did not contain my history files!...so I had to go back to 3.6.22.
    4) After returning back to the restore point that contained 3.6.22, on the desktop, clicking on the Firefox icon, it won't open.
    5) I went to desktop, in lower left clicked Start, then clicked Programs, and yes Firefox is there as an installed program, however the tag reads Mozilla Firefox (safe mode)...so it's in safe mode and won't
    open. What now?---~~~~~(end of original post).
    HERE ARE THE EXACT 3 Qs I need answered:
    1) Can I retreive and save MY PRECIOUS HISTORY from somewhere? Can I force new 6.0 to find and retreive it from 3.6.22) And how would I do that? That's the reason I'm trying to go back to 3.6.22, because it likely still contains my history which does not appear in new install of 6.0?
    2) As it stands, go back to previous state now has Firefox 3.6.22 in safe mode. It won't open after XP went back to previous state containing 3.6.22. File tree says Firefox is installed but is now in safe mode. So Q2 is: Can I open Firefox out of safe mode and if so how?--I'd be done because it likely still contains my history.
    And if not, can I get retreive my history from it somehow? Or somehow get 6.0 to rediscover it hidden somewhere (Show All History in new 6.0 install was empty).
    3) Do I have to give up on retreiving my history even though it's got to be somewhere in my computer? I did not uninstall anything.
    If my history cannot be retreived, then I have no choice but to proceed in life with 6.0 without my precious History, a huge store of info and loss of data for me, big time!
    FIREFOX HELP NEEDS TO TELL PEOPLE HOW TO SAVE THEIR HISTORY WHEN THEY UPGRADE TO NEW VERSION and whether or not to uninstall previous FF version first. Please pass this urgent advice on to Firefox techs. I can't even figure out how to email THEM!!!!
    Thank you all out there in cyberspace whereever you may be!
    (P.S. Cor el, thanks for your reply...how do I reach you by email link does not work....)

    What in particular didn't you like about Firefox 6?
    You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
    *https://support.mozilla.com/kb/common-questions-after-updating-firefox
    Do a clean reinstall of the version that you want to use.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

Maybe you are looking for