MD04 and PO return delivery quantity with exception message 15

Hi, Please suggest me how to get rid of PO return delivery quantity from MD04 where it is showing as POitem with receipt quantity and exception message 15 - reschedule out and reschedule date is showing current date.
Here we have received x qty from vendor and then moved y qty to blocked stock and then did return delivery (here return delivery did without any reference), we will not receive y qty anymore in future, how to get rid of this qty from MD04.

Hello
Please refer to the following note for more details about this scenario:
634038 - MRP: Returns order and delivery
This note explains in detail the customizing settings that you might use to turn a return delivery not relevant to MRP.
Best Regards
Caetano Almeida

Similar Messages

  • Returns between Goods-Issue and Billing - Return delivery before Invoice

    Hi all,
    Here comes a problem with sales process configuration.
    Buisness case:
    Customer generate a sales order document, outbound delivery and posting goods. Invoice is generate on end of every month. Very often return delivery is generate before generate the invoice. Outbound delivery is after posting process and cancellation process is not recomended. If invoice will be generate with reference to the sales order, the quantity will be wrong, because system get information from sales order without correction to return delivery quantity. The assumption is that the invoice must have a correct quantity as a sum based on outbound and return delivery.
    So...any solution in standard?
    Regards,
    Michael

    In the RE Sales Order configuration you can make reference mandatory. Once you do this the user will not be able to even create a returns order without the original invoice.
    I hope this helps.
    Regards,
    Mani

  • Re scheduling out with exception message 15 in MD04

    Hi All,
    In stock/requirement list the Purchase order is split into several  Quanities on the same day with exception message 15 instead of displaying single PO. Also, attached the screen shot for your reference.
    Please let us know what could be reason for this.
    Regards,
    Prabhakar.V

    Hi All,
    I tried both the customization and run MRP but still Multiple PO item is appearing in the stock/requirement list and problem is not resolved yet.
    Could you please suggest to proceed further.
    Thanks and regards,
    Prabhakar.V

  • Report to get the Material with Exception message"10"  Rescheduling in

    Hello All
    We want to get the report to get the materials with exception message"10".We can get deatils from T code MD06,but it is restricted to MRP Controller/Vendor and we can get the details from Table "MDKP".Plese provide any report or T code to get the details of the exception message "10"
    Thanks
    Suresh kumar

    Hello
    You can use BAPI_MATERIAL_STOCK_REQ_LIST todata from MD04 or BAPI_MATERIAL_MRP_LIST to get data from MD05.
    BR
    Catano

  • MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred on the current command. The results, if any, should be discarded".

    MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred
    on the current command. The results, if any, should be discarded". We are facing this issue for past two month.But funny thing is server will be up automatically with out any service restart manually.  Also if we try to restart the SQL
    server service manually then SQL server will be in a dead lock situation and it will not come up even if we wait for long time. Then we should do a windows server machine restart to
    make the SQL sever up. As a suggestion from Microsoft to fix this kind of similar issue,
    we have installed service pack 3 for SQL Server. But even after we are facing same issue.
    Server Details:
    Server OS: Windows Server 2008 R2
    Two type of database servers are installed on server:
    1. MS SQL Server 2008 R2
    2. My SQL
    Also Reporting server is configured for the purpose of generating SSRS report from a dot net website.
     NOTE:Immediately after the data retrieval/save, we are closing the connection explicitly by the
    application.
    we have checked the windows event log and below are the details:
    Log Name:      Application
    Source:        ASP.NET 4.0.30319.0
    Application information:
        Application domain: /LM/W3SVC/5/ROOT-1-130718142067856406
        Trust level: Full
        Application Virtual Path: /
        Application Path: E:\WebSpaceFolder\ACSQuiK\Production\
        Machine name: DBSERVER 
     Process information:
        Process ID: 148
        Process name: w3wp.exe
        Account name: NT AUTHORITY\NETWORK SERVICE 
     Exception information:
        Exception type: SqlException
        Exception message: A severe error occurred on the current command.  The results, if any, should be discarded.
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
    Log Name:      Application
    Source:        Report Server Windows Service (MSSQLSERVER)
    Description:
    Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Report Server Windows Service (MSSQLSERVER)" />
        <EventID Qualifiers="0">107</EventID>
    Could anybody can suggest any kind of fix for this issue? Thanks in advance.

    Hi YesYemPee,
    I have tried but still not clear about your issue, I would like you provide more details information about your issue based on below points to better analysis about the issue:
    What action did you do and caused the error "A severe error occurred on the current command. The results, if any, should be discarded", did you run report on the web application or something else then the error happen?
    If you rendering the report and got the error, please try to provide us more error information in the log files which path like:
    C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
    If it is not the case in step1, Please try to provide SQL Server Error log(SQL Server Logs) and more details information.
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

    Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • HT201263 Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New
    Also, see iTunes- Restoring iOS software.

  • Purchase orders and their open order quantity with their due delivery date

    hi friends
    i need to build a query where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done this.
    ME2M serves my requirement upto little but i cannot see the delivery dates in that report.
    please help mein finding the steps involved in building the query.
    Thanks
    Alahari

    Deliver date is available in table EKET field EINDT.
    Use table : EKKO ,EKPO, EKET.

  • Show to show Sales Order, Return, Delivery Quantity

    Hi all,
    See the following query of sales order with combination of Return, Delivery and AR invoice.........and tell how to show Quantity of Sales, return and delivery.........
    SELECT b.Doc_Num1 as 'SO. No.',
    b.DocDate1   as      'SO. Date',
    b.Doc_Num2   AS      'Del.Doc.No.',
    b.DocDate2    AS      'Delivery Date',
    b.Doc_Num3   as      'A/R Invoice No.',
    b.DocDate3    as      'Inv. Date',
    b.Doc_Num4   AS      'RETURN Doc.No.',
    b.DocDate4    as      'Ret.Date',
    b.CardName   as      'Vendor Name',
    b.NumAtCard  as      'Bill No. & Date',
    b.ItemCode   as      'Item Code',
    b.Dscription as      'Dscription',
    b.Quantity1  as      'AR Invoice Quantity',
    b.LineTotal  as      'Base Amt.(Rs.)',
    b.WTSum           AS      'TDS (Rs.)',
    b.DocTotal    as     'Total (Rs.)',
    sum(b.BED)    as           'Bed Value',
    sum(b.EDCS)   as          'EDCS Value',
    sum(b.HECS)   as          'HECS Value',
    sum(b.VAT)        as           'VAT Value',
    sum(b.CST)        as           'CST Value',
    sum(b.CVD)        as           'CVD Value',
    sum(b.SerTax)  as           'SERTAX Value',
    sum(b.CSonSerTax) as      'CS Value',
    sum(b.HECS_ST)      as      'HESC Value' 
    from (
    select *,( a.Bed + a.EDCS + a.HECS + a.VAT + a.CST +a.CVD + a.SerTax + a.CSonSerTax  + a.HECS_ST ) as Filter from (SELECT distinct
    T0.DocNum as 'Doc_Num1',
    T0.DocDate as 'DocDate1',
    T2.DocNum as 'Doc_Num2',
    T2.DocDate as 'DocDate2',
    M.DocNum as 'Doc_Num3',
    M.DocDate as 'DocDate3',
    M.CardName,
    M.NumAtCard,
    L.ItemCode,
    L.Dscription,
    L.Quantity as  'Quantity1',
    S.DocNum 'Doc_Num4',
    S.DocDate as 'DocDate4',
    L.LineTotal ,
    M.DocEntry,
    M.[DiscSum],
    M.WTSum,
    M.DocTotal,
    (case T.Statype
    when
    -90 then sum (T.[TaxSum]) / 4 else 0 end) 'BED ',(case T.Statype when
    -60 then sum (T.[TaxSum]) / 4 else 0 end) 'EDCS ',(case T.Statype when
    7 then sum (T.[TaxSum]) / 4 else 0 end) 'HECS ',(case T.Statype when
    1 then sum (T.[TaxSum])  / 4 else 0 end) 'VAT',(case T.Statype when
    4  then sum (T.[TaxSum]) / 4  else 0 end) 'CST ', (case T.Statype when
    10 then sum (T.[TaxSum]) / 4  else 0 end) 'CVD ', (case T.Statype when
    5  then sum (T.[TaxSum]) / 4  else 0 end) 'SerTax', (case T.Statype when
    6  then sum (T.[TaxSum]) / 4  else 0 end) 'CSonSerTax', (case T.Statype when 
    8 then sum (T.[TaxSum]) / 4 else 0 end) 'HECS_ST'

    Hi Sonal,
    Try this,
    SELECT b.Doc_Num1 as 'SO. No.',
    b.DocDate1   as      'SO. Date',
    b.Doc_Num2   AS      'Del.Doc.No.',
    b.DocDate2    AS      'Delivery Date',
    b.Doc_Num3   as      'A/R Invoice No.',
    b.DocDate3    as      'Inv. Date',
    b.Doc_Num4   AS      'RETURN Doc.No.',
    b.DocDate4    as      'Ret.Date',
    b.CardName   as      'Vendor Name',
    b.NumAtCard  as      'Bill No. & Date',
    b.ItemCode   as      'Item Code',
    b.Dscription as      'Dscription',
    b.Quantity1  as      'SO_Qty',
    b.Quantity2  as      'DLN_Qty',
    b.Quantity3  as      'A/R Inv_Qty',
    b.Quantity4  as      'Return_Qty',
    b.LineTotal  as      'Base Amt.(Rs.)',
    b.WTSum           AS      'TDS (Rs.)',
    b.DocTotal    as     'Total (Rs.)',
    sum(b.BED)    as           'Bed Value',
    sum(b.EDCS)   as          'EDCS Value',
    sum(b.HECS)   as          'HECS Value',
    sum(b.VAT)        as           'VAT Value',
    sum(b.CST)        as           'CST Value',
    sum(b.CVD)        as           'CVD Value',
    sum(b.SerTax)  as           'SERTAX Value',
    sum(b.CSonSerTax) as      'CS Value',
    sum(b.HECS_ST)      as      'HESC Value' 
    from (
    select *,( a.Bed + a.EDCS + a.HECS + a.VAT + a.CST +a.CVD + a.SerTax + a.CSonSerTax  + a.HECS_ST ) as Filter from (SELECT distinct
    T0.DocNum as 'Doc_Num1',
    T0.DocDate as 'DocDate1',
    T2.DocNum as 'Doc_Num2',
    T2.DocDate as 'DocDate2',
    M.DocNum as 'Doc_Num3',
    M.DocDate as 'DocDate3',
    M.CardName,
    M.NumAtCard,
    L.ItemCode,
    L.Dscription,
    T1.Quantity as  'Quantity1',
    T3.Quantity as  'Quantity2',
    L.Quantity as  'Quantity3',
    X.Quantity as  'Quantity4',
    S.DocNum 'Doc_Num4',
    S.DocDate as 'DocDate4',
    L.LineTotal ,
    M.DocEntry,
    M.[DiscSum],
    M.WTSum,
    M.DocTotal,
    Regards,
    Madhan.
    Edited by: Madhan Babu C on Aug 28, 2009 2:09 PM

  • Return Delivery Quantity Changing

    Hi,
    I have created a GR for a 100 nos and i want to process a return delivery wrt to the mateial document. But the actual quantity to be returned is only 20.
    But when i am giving the material documetn as reference with the return delivery option, the quantity adopted is 100 and i am not able to change it to 20. 
    I am using MIGO transaction.
    Please expedite.
    Regards,
    RitiG

    Take the material document no for the GR done for  qty 100
    Please go to T.Code : MBRL
    Enter the material document no enter the qty as 20
    and  save.
    Qty 20 has be returned.
    G.Ganesh Kumar

  • Return delivery process with excise in MM module

    Dear Friends,
                        this is chandu working as a consultant-mm , please any one can give the clear information regarding return delivery process for excise material , i'm following one process that is after invoice verification
    1) reverse excise invoice with MR8M
    2) return delivery with MIGO
    3) prepare outgoing excise invoice with J1IS  for print out J1IV
    4) preparing credit memo in MIRO with reference to original po
    the second process
    1) create return po with selecting return po check box in po
    2) GR with reference to the return po
    3)then J1IS  and J1IV  same process
    4) credit memo for return po in MIRO
    this 2 ways i'm doing the process  in the registers part1 that is qty updating (i.e qty is reducing)  but in the case of part2 that is the value it is not updating (i.e value has to reduce in the register right i'm working first time on CIN plz guide me the correct procedure if i'm doing wrong , in this my problem is only value not updating part2 register plz give me solution with clear explanation .
    regards
    chandu

    Hi,
    Follow the below mentioned procedure;
    1. ME21N - Create a Returns PO (Activate "Returns" indicator for PO line item)
    2. MIGO - Goods Receipt > Purchase Order (Returns PO) (Here system will hit Mvmt type "161" and you can also select Un-restricted/blocked stock from where you want to return the stock)
    3. J1IS u2013 Excise Invoice Other Movements
    Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
    Here put all details as below and Press u201CEnteru201D.
    Ref.doc.type - MATD, Doc Number - Material document No of 161 mvmt, Doc Year, Series Group, Excise Group and Vendor
    Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
    4. J1IV - Post and Print Outgoing Excise Invoice.
    5. MIRO - Credit memo w.r.t. Returns PO.
    Regards,
    Mahesh Wagh

  • Purchase orders and their open order quantity with their due dates.

    hi friends
    i need to build  a query  where i can see the purchase orders and their open order quantity and their respective due delivery dates.i have never done  this.
    ME2M serves my requirement  upto little but i cannot see the delivery dates in that report.
    please help mein finding the steps involved in building the query.
    Thanks
    Alahari

    Use the table EKPO and EKKO
    adhoc querry is a tool in which we can create report
    to get report we have to use three t. codes
    1.sq03-->is for to create user group
    2.sq02--.is for infoset Querry
    3.Sq01-->for exact querry
    try with these codes or revert with ur response
    follow the link for query creation
    First check this link,
    SAP Query Creation
    SAP Query -A Reporting Tool for Functional Consultants(Part 2)
    SAP Query 1
    SAP Query -A Reporting Tool for Functional Consultants (Part 1)
    Always after going to SQ02 or SQ01 T Code ,first click on Environment in the menu ->Query Areas-->
    Standard Area Client specific and then start creating the Infoset or else the query.
    Still if you are not satisfied means,please revert back.

  • Issue in MD04 transaction with exception message 26

    Dear All,
    I am facing 2 issues:
    1) Even if the sales order line is confirmed and fulfilled, we are getting the stock for that material against the same sales order in the MMBE Transaction.
    2) For the above material present in those sales Order which are confirmed and fulfilled, We are getting the entries for that material in Transaction MD04 ( Stock requirement list of the material after we run the MRP for a particular materia) with the exception message 26.
    From our end, we have used the report sdrqcr21 which delete the wrong entries from "VBBE" so that MD04 will show incorrect entries but this approach is not helping us in the above situation.
    Regards,
    Rakesh

    Rakesh,
    This is one issue.  There is nothing wrong with the software, this is standard behavior. You have built or procured more stock than was required by the sales order.  The remaining unnecessary stock is now sitting in inventory, and is displayed in MD04 under the Sales order segment.  This stock can never be used again within SAP, unless someone re-opens the sales order or performs some transaction to remove the stock from being 'Sales order on hand' stock.
    Some companies will scrap this material, using their standard scrapping policies.  Others will transfer this un-usable E stock to general stock, if it can actually be reused.
    Rgds,
    DB49

  • Return delivery BAPI with out ref

    looking for  bapi or fm to create a return delivery with out reference.

    Hi Priya,
    Try below BAPI  programs
    BAPI_OUTB_DELIVERY_CREATENOREF
    SHIP_DELIVERY_CREATE_NOREF
    Regards
    Ram

  • PO doesn't get created, backend returns PO number with "S" message

    Hi experts,
    I need your kind assisstance with the following problem: when SC is sent to the backend, the backend system returns the PO number with a message that the PO has been created. When we check at the backend the PO is not created.... It happens only when customer fields are transfered in the table EXTENSIONIN.
    SRM Server 500.
    Thanks a lot for your help.
    Tomas Kraus

    Hi
    <u>What error are you getting in this case ?</u>
    <b>Question:</b>
    <u>You are using BAPI_PO_CREATE1 and BAPI_PO_CHANGE to supply user-defined fields for tables EKKO, EKPO and EKKN. During the update, a termination occurs with DBIF_RSQL_INVALID_REQUEST.</u>
    Answer:
    Check in the CI structures of the corresponding database table as to whether there are type P (packed) fields. Refer to the online documentation for user-defined fields and the ExtensionIn parameter:
    In BAPI table extensions, only CHAR data type fields and similar data types can be used by the customer. This restriction arises as a result of the BAPIPAREX reference structure of the extension parameters. In addition, the customer must not use standard table fields in the APPEND of the BAPI table extension because a 'move-corresponding' would also overwrite the SAP field.
    See Note 509898 for a solution approach.
    <b>Please go through the SAP OSS note -</b>Note 582221 - FAQ: BAPIs for purchase orders
    <b>for more details.</b>
    <u>Also go through the related SAP OSS Notes -></u>
    Note 390742 - Customer enhancements not transferred
    Note 336589 - BAPI_PO_CREATE: Customer enhancements
    Note 867018 - Customer fields transfer to the back end
    Note  445169 - BAPI_PO_GET_DETAIL: Integrated customer enhancements
    Note  395311 - BAPI_PO_CREATE: Customer enhancements not copied
    Note 631758 BAPI_PO_GETDETAIL: Incorrect ExtensionOut struc. name
    Hope this will definitely help.Do let me know.
    Regards
    - Atul

Maybe you are looking for