MD04 Overview tree issue question

Good evening,
I have an issue where my overtree in MD04 is going a bit funny.
I explode the selected order and it displays all the lower level (as you would expect) but for the Semi Fin (sub assembly) I am get 2 or 3 entries for the Semi Fin items!!
Can anyone tell me why this is happening or how I can correct it?
Kind regards

Hi,
Please check stock requirement list of the semi-finished( sub-assembly) itself.
Check how many dependent requirements are generated which are pegged for the finished good which is in question, if there are multiple dependent requirement for the same finished good, then you are expected to see as many number of segments for the SFG in order tree report.
Best Regards.

Similar Messages

MD04 Overview Tree

Dear Gurus,
I have a stock transfer scenario in my project.My problem is in MD04 overview tree I see all the bom items of stock transfer components of issuing plant.Please tell is this standard and how we will restrict to users in receiving Plant.I have given authorizaton for the T-Code in receiveing plant but still by mistake user can change the MRP element of issuing Plant in MD04.Is there any setting so that the MRP element of issuing plant in receiving plant will be kept for display only.Means the MRP element cannot b converted to prod order or purchase order in reciving plant.Hope u get my question.Waiting for ur reply.
Kind Regards.
Srajane

Hi,
You have to maintain roles for creating/changing each MRP element on the basis of plant or order type whichever parameter possible. Do not think of restricting in t-code MD04, but organize authorities for each MRP element one by one and create different roles for the people in different plants.
Regards.

MD04 overview tree problem

Hi SAP experts i hope you can help me on something, i need to know the requirements for the Overview tree to work with my materials, i have a group order that i would like to view in the overview tree but i can only see the FERT material, i cant see the other two HALBs, i hope you can help me out, if you need more info please tell me.

German ,
It does not matter if your MRP type is M0 or PD. You should be able to see the entire Order structure if you have the MRP element (planned order/ production order ) for that material.
If there is no such MRP element either due to no requirement ( sale order /dependent requiremnt) or Excess Stock (stock more than requirements) then you cannot see the Order Tree in the Overview screen. The Order tree will display only if there is a order( plan or production).
Hope this explains your issue. If you have further questions please come back.
Thanks,
Ram

Md04 not showing Overview tree

In my case MD04 is not showing the overview tree.
First case
For material x if i put Plant and MRP area same then its not showing the overview tree.
Second case
When i put MRP area (as per configuration ) and plant in this case it is showing the overview tree.
please suggest.

Dear Amit,
system is giving correct results,
if your order will show the tree in which mrp area it is.
now suppose you dont put any MRP area in the intial screen and put plant only. then system will consider that plant same as mrp area.
now if you put the the MRP area and the respective plant.
orders in that MRP area will be shown. and order is is only shown when there is pegged ordes to that order.
in your case there may not be dependant orders.
and you cant see the same orders in 2 cases you told.

MD04/ MD4C-Overview Tree

HI,
Client has a requirement which goes as: There are BOMs with BOM usages 1,5 & R (R is copied from 1, used for lower components). Now in MD04/ MD4C, when we navigate to the Overview Tree, the client wants that only those users, can see the components (which have BOM usage R), who have the authorization for BOM usage R. The authorization object is there but it only restricts the users from change/ display of BOM.
How to make the lower components with usage R not visible for users not authorized to use BOM with usage R in MD04/ MD4C?
Please advice.
Thanks.

Hello
On the standard system, this is not possible. Transaction MD4C is builded based on the planned order dependent requirements (table RESB), not on the BOM itself. Therefore, there is no authority check for the BOM usage.
BR
Caetano

Document overview tree in ML81N is blank

Hi All,
User has reported an issue that the document overview tree in ML81N is blank. It is not showing any recent POs. Is there any setting through which this tree can be populated? Or this is related to some authorization issue?
Thanks In advance.
Soumya

Click on the Switch display as below :

To download from AppStore want tree security questions but i have only one question

When i want to download (free) from AppStore ask me TREE Security questions , but in security settings my APPLE ID have only ONE question and answer
Help me please in this problem

Hello HalisaEr,
Thank you for the details of the issue you are experiencing with your security questions. I found an article with some useful information if you unable to answer the security questions:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
You can find the full article here:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

2950 spanning tree issue

Here is the problem we are having , we have a 2950 hooked to a 6509 hybrid dist box with approx 90 vlans on it . We hook up a new 2950 and we get the following message, Dec 21 19:47:45.116: %SPANTREE_VLAN_SW-2-MAX_INSTANCE: Platform limit of 64 STP instances exceeded. No instance created. Ok , I know about the spanning tree issues with the 2950 only having limited PVST instances . But up at the dist side we have "manually pruned off all but 5 vlans on the trunk feeding this 2950 with the "clear trunk" command . I thought manually pruning off the vlans from the trunk would eliminate this problem , maybe i have a misunderstanding of how this works. Also the message on the 2950 complains about it only having 64 instances of spanning tree yet when you do a "show vtp status it says it supports 250 instances locally so whats up with that , 2950 running 12.1.22EA4 . So I guess I'm asking is there any way around this for the 2950 . Also in client/server mode do you have to manually prune off the vlans on both the server side and the client side ??

Hello Glen,
I guess instead of manually pruning the VLANs off the trunk, you could also try and enable VTP pruning globally on the 6509 (set vtp pruning enable). I assume you have the 6509 configured as the VTP server (set vtp mode server) ?
I am not sure if CatOS and IOS defaults to the same VTP version, can you check this (with 'show vtp domain' for CatOS and 'show vtp status' for the IOS switch) ?
Also, in a purely IOS environment, manually pruning VLANs off a trunk requires doing that only on the server side, but with a mix of CatOS and IOS, it might have to be done on both sides, you might want to give it a try and use the 'switchport trunk allowed' command on the 2950 as well...
Regards,
GP

WiSM Design and Testing Issues / Questions / Queries etc......

Hi all. Heres hoping you can help........
I hope you can grasp the following description of the test network I have. I admit a diagram would have been better but it's hard to send a whiteboard over the web : )
I am currently in the process of designing and testing out a wireless solution and am having a few issues / queries. I have a 6509 with a Wireless Services Module (WiSM) installed in slot 3, one Cisco 1240 AP on a remote LAN and a DHCP server on a remote LAN (not the same as the AP)
I am using LAG on controller 1 with port channel 1 and native VLAN 20.
VLAN 20 is 10.1.1.0 / 24
The management interface has IP address of 10.1.1.10
The AP-manager interface has IP address of 10.1.1.11
VLAN 11 is 128.88.1.0 / 24
The service port has IP address of 128.88.1.10
The Cisco 1240 AP on the remote LAN is picking up a IP address via DHCP (from a remote DHCP server) OK and can route to both the aforementioned VLANs 20 and 11.
Issue/Question 1
I can ping the management interface locally on the 6509 and also remotely from the AP so all looks OK there however I cannot ping the AP-manager locally or remotely.
Is this expected behaviour? I would expect that if I can ping one I should be able to ping the other or is the AP-manager interface not routed and only used in some way to create the LWAPP tunnel>
Issue/Question 2
As previously stated the AP is picking up and IP address but it is not being passed the Option 43 parameter from the DHCP server (not yet ruled out the DHCP server as the cause of this). Due to this I have amended the DNS entry of the management interface (10.1.1.10) to CISCO-LWAPP-CONTROLLER as a last resort. With a console on the AP I can see that the AP tries to join by the "%LWAPP-5-CHANGED: LWAPP changed state to JOIN" output but then get;
LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response
LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
Is this related to the fact that I cannot see the AP-Manager interface on the network?
Issue/Question 3
I have chosen to hard code the IP address of the Service port rather than leave it to DHCP. I am more comfortable having static addresses for management. However, there is no option for a default gateway for the service port.... If I try to get round this by applying a static route via the CLI on the WiSM controller to point traffic out via 128.88.1.1 on VLAN 11 this seemingly overrides all routing on the controller and causes my management interface (10.1.1.10) to fall off the network. Is the routing table applied "en masse" to the Controller? If so this surely means that to use the Service Port you have to be on the local LAN segement?!?!
Thanks for reading my ramble and heres hoping you can shed some light on my "niggles" !

Hi
I am having exactly the same problem.
Getting the same error message "No more AP manager IP addresses remain."
I'm deploying 200 AP's that will connect to 2x WiSM (4 controllers) in 2 seperate C6k Chassis
(Controller 1a & 1b = wism 1, 2a & 2b = wism 2)
I have had 1 out of the first 5 AP's physically connected, come online and register with Controller 2b (btw: this was not the master controller, it should not have registed with 2b). All others fail with the same error message as above.
I have all Management and AP-Manager interfaces in the same vlan/subnet as my AP's.
I place a console cable onto the failed APs and see the AP cycle though the motions of trying to find the controllers, download new software code from a random controller, then it reboots, gets DHCP assigned, then get the "No more AP manager ip addresses remain" and then issues a "Reload requested by LWAPP CLIENT.
Then the AP does the whole cycle all over again.
Not sure why the AP's don't register with the controllers when they are all in the same vlan.
I have a couple of extra questions.
1. what address do you bind to the dns entry cisco-lwapp-controller.localdomain, is it the management address or AP-Manager address ?
I have bound it to the Management address for WiSM 1a.
Also I have 4x controllers (2x WiSMs, 2 controllers per WiSM). Do I just bind controller 1a's address or do I have to put 4x DNS entries into my DNS server for all my controllers?
2. DHCP option 43, Do I place all 4x management ip addresses in the option or do I put in the AP-Manager Ip address?
I followed this guide but was still a little unsure http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp125304
2. This final question is more around Dynamic Interfaces for my 4 controllers once I get the AP's resisted,
Do I have to set up a dynamic interface ip address on every controller?
e.g.
Ssid = data, VLAN=10, VLAN10=10.0.0.0/24, I will bind AP's 1-8 to VLan group 10.
Do I have to setup 1 dynamic interfaces per controller in the 10.0.0.0 subnet, taking up 4 addresses ?
And if I only have to set up 1 or 2 dynamic interface, how does this work if the controller fails?
Cheers

Clearing overview tree in Monitor

Hi,
I want to know how to clear overview tree in monitor . (Info package Load Monitor Screen)

Hi Arshad,
You cannot do that. What you can do is delete the request itself. In case the request is errored then goto RSA1 -> PSA -> find the request and delete.
Bye
Dinesh

Tree Issues

Hi All,
I'm using APEX 4.1 with Oracle 11g. I have created a page with the following:
1. Tree region which includes the selected_node_page_item option so the user can click on a node and the node is remembered when user browses away from the page and returns.
2. SQL Report built on a dynamic query so the user can enter a search which returns a results of potential records/nodes that the user may want to navigate to in my tree region (by clicking on a search result)
Everything is working quite well except for a couple of issues that need to be addressed:
1. The tree loads with no issues in Firefox and Chrome however, it is extremely slowly to load in IE8 and in some cases I get an IE prompt stating:
"Stop running this script? A script on this page is causing Internet Explorer to run slowly. If it continues to run, your computer may become unresponsive."
2. Although my search feature is working in that it highlights the tree node that the user selects in my search grid, it does not actually scroll the page/tree to where the highlighted node is. This means that the user has to scroll the page and keep a sharp eye to spot the highlighted node, not ideal for large trees ! Is there a way I can get the cursor to the highlighted node?
Any help on both issues would be appreciated.
Thanks
Billy

Billy,
While i can't really say why IE8 would be so much slower, I can't say it really surprises me. 3000 nodes is a lot too! It's probably just real slow in processing it all.
However, you could eliminate a lot of frustration by not having your page submit on every action. Having to reload the page just because you want to select a different node is complete overkill when your tree is so large, and especially when the browser is so slow.
What actually happens when you use the default method which submits? On load, the tree is initialized, and it runs some javascript code which will select the branch corresponding to the id in the selected node item:
apex.jQuery.tree.reference(l$Tree).select_branch(l$Node);By implementing some javascript you can skip the entire submit process, saving time and bandwidth. I've implemented this on my tree demo page : http://apex.oracle.com/pls/apex/f?p=54687:38
All the code I used is there aswell, so it shouldn't be to hard to figure out what you need. Leave a comment if you do need some help.
I've also added in code which will scroll to the selected node until it is in view at the top of the page. This is a solution from StackOverflow: http://stackoverflow.com/questions/6677035/jquery-scroll-to-element
$("#button").click(function() {
     $('html, body').animate({
         scrollTop: $("#elementtoScrollToID").offset().top
     }, 2000);
});

Jabber for Windows - Outlook Meeting integration issue/questions

Hi,
A couple of questions if anyone else has experienced or can answer:
1. When you turn on Jabber it appears in the trace file to create a transitionlist of meetings in your calendar for the next four hours. Eg if meeting 8-9 it will show 8:00 BUSY
9:00 FREE
and this works ok. This transitionlist also seems to update each time a status change occurs from what I have observed.
The problem we seem to have is if I open Jabber at 7.45am and have a meeting 8 - 9 then it shows "In a meeting", then if I create a meeting at 9.15am for 10am-10.30am, the meeting status does not change as it seems to operate of the four hour transitionlist. I have the setting in the CUPS server for exchange sync to happen every twenty minutes, but this does not seem to update.
I'm be focussing on the wrong area but basically not all calendar appt's update status in Jabber, especially the one's created within the four hour pperiod.
2. To have the presence status of a person in an Outlook email address field, do you need 2010 or does it work with prior versions, we currently operate 2003. I have configured the SIP component in AD, but no status or click to call facility from Outlook.
Thanks in advance
Mal

Hi Mal,
Thanks for your post. Issue (1) sounds like a configuration issue in your setup. Please open a TAC case for further assistance.
Regarding (2), Jabber for windows does noot support Office 2003. List of supported MS Office applications is listed in Jabber for Windows administration guide.
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_AC2F9334FEC54DA98861EB52944C6F08
Thanks,
Maqsood

MacBook Pro 13" Screen Issue Question

Hey guys
I have this strange area on my MacBook Pro screen that is noticalby brighter than the rest of the screen. I've tried using the screen capture function, but the patch doesn't show up on that images generated. Here's a photo i took with my iPhone
xtjied.jpg
It's the area near the centre of the photo where the issue is present. It is easier to see on the photo if you move away from the screen, so you're further away, then it stands out more. However i can see it clearly when using the MBP on my lap or on a table.
My MacBook is still in warranty, so my questions are:
A) Should i take my machine to the Apple Store to show them the issue?
B) What are they store likely to do, will they replace the screen, replace the machine or simply turn me away and tell me the issue doesn't warrant action?
Even though it might seem like a small issue, once i see it whilst working my vision is drawn to it, so i lose focus on the rest of my screen.
Thanks in advnace
Tom

Thanks for you response, I just want to check you're seeing the same error i am, i know the photo looks like there's a large area with a different brightness, but that's just because of the way I was positioned when taking the photo.
Here's a better photo to illustrate the issue i'm having
http://i.imgur.com/mDogr.jpg
It's the small area just off centre that is a different colour to the rest of the image.
http://i.imgur.com/UF8c9.jpg
it kind of looks like a thumb print, but it's not
Would you still expect them to replace/repair my machine?
Thanks again

Several issues questions with 865PE neo2 FIS2R

ok first off thanks to the people here, the sticky's are great and very informative.
although i do find the info outdated in that they all refer to old bios's. other than that this is a fantastic forum
ok so on with the questions.
im using a Silicon Image IDE U133 RAID controller (PCI CARD), , the ide hard drive(s) do NOT have to be in raid its just like a Promise card but its made by someone else.
ANYTIME i have ANY type of hard drive hooked up to that, the motherboard takes nearly 5 minutes to boot to the active hard drive. even if i select boot menu and then the RAID hard drives the SATA drives i mean.
my active hard drives are 2 Maxtor 160gig SATA drives in RAID0 mode.
if i have NO hard drives hooked to the controller card the system boots directly to the active boot hard drive. without dealy.
IF i have an ide hard drive set to boot off the SIL card, it takes just as long. which seems like ages.
anyone know of issues with this mobo and certain IDE hard drive controllers. (PCI)
i too am having blank sreen issues with my 9700 pro video card. but mine is nearly 2 out of 5 times i boot i have no video, and many times i am forced to reach around the pc case and unplug the power cord for a few minutes, in order to get the system to boot WITH video.
another issue that i have and this is the WORST.
nearly 90% of the time, the motherboard will NOT i repeat will NOT boot from a floppy or cdrom, all i get is the message on screen, if i am using a bootable floppy, like "Starting windows 98" or "Starting Windows ME" these are DOS boot disks made with windows XP.
i then get only a blinking curser. and nothing else.
OR
i get a blinking cursor and then i must wait 5-10 minutes before anything else happens. and even then usually the cdrom or floppy wont complete the booting process.
this happens regardless of if i have anything hooked to that IDE controller card.
i am now using the LATEST bios offered for this mobo and nothing has changed in fact ,,well according to the readme i was expecting to see some changes within the bios but i seee none. maybe i read the read me wrong. (say that 5 times fast)
i can NOT run the ram performance mode in anything other than slow. which is making me very angry.
i have infineon ram not sure what model but i will report back when i find out.
but i do recall sandra reporting it as supporting 2.5cas and other setting that appear to be FAST or TURBO and yet i cant use those in the bios otherwise my system reboots in windows or i get memory speed errors during post.
overall im VERY pleased with this mobo but am discouraged at the way its treating me.
i have a PentIV 3.0ghz HT which is a NON production model, it is a sample model with the multiplyer unlocked. i can go with a lower multiplyer but NOT a higher one, so i assume its unlocked but the CPU itself is limited to 15x multiplyer.
i have tried tons of configurations and can run very stable at 3.45ghz but i MUST make the dram 333 mhz not 400. then raise the FSB to around 225 or 230. but i still get serious power offs when doing any heavy work on the pc.
i have CPU voltages at 1.575 yet sandra reports it as 1.55
DRAM voltage at 2.7 ( i am using DDR400)
and AGP at 1.7
with this CPU what is a GOOD voltage to use.
is it ok to go higher than 2.7 with DDR400 ?
and AGP everything i have read said that 1.8v will fry the 9700 pro. is this true ?
sorry im asking alot of questions but if you can help me with any of them i would REALLY appreciate it, and i would pass along any info i learn.!

Well as Far as your PCI IDE Controller Questions are concerned, I would not know as I have never Used one , And with the Available Promise controller, you should Try using this instead......As Far as your Memory Voltage, You can Raise the Voltage above 2.7 Volts, But unless you are Really Overclocking the PBS or FSB as some call it, then 2.7 Volts is the "Norm" For this Board, But if you do NOT have High Performance RAM you should check with the Manufacturer, before you Go any Higher than 2.7 V, as far as the AGP Voltage is concerned, 1.6 Volts is the MAX that you should Have it set to with any of the new NVIDIA-FX or ATI-PRO, or XT Series Cards, Because as you know, the Cards that are 8X AGP Speed only Require .8Volts to begin with, and the ABP Voltage is Further Reduced by the Cards onboard Electronics, And if you have one of the High Performance Cards, well as you know, these get 90% of their Operating Power from the 4 Pin Molex PSU Connector. Any higher AGP Voltage then 1.6 Volts will only increase the Temps. of Both the Motherboards Chipset, and the VPU itself.................Sean REILLY875

Report tree issue

I am trying to change the discription in the report tree that has been built.
As of now the report tree shows the description which is linked to the reports.
My issue is that i need to give some other description and not the one which is linked to the reports.
Can someone tell me how can this be done??

I am using transaction gd00. I have to change the description. How can this be done??

MD04 Overview tree issue question

Similar Messages

Maybe you are looking for