MDG Hub Embedded Search configuration

Hello Experts,
We are in the process of configuring Embedded Search for MDG 7.0 hub as per the config guide link below .My question is where (Hub or Client or both) do we configure the search connectors for embedded search.
Set Up Search - SAP Master Data Governance - SAP Library
Please let me which of the following option would best fit for configuring search for Hub implementation
Option 1: Configure the search connectors in Hub
Option 2 :Configure the search connectors in client
Option 3: Configure the search connectors in both hub and client
Thanks,

you mean on 7.0 and now you are on 7.1. Can you please be specific as i am also facing the same problem. i am on TREX 7.1 and tried report 'ESH_IX_PROCESS_CHANGE_POINTERS' but no any effact on trex search result. I created soem new data for job family and talent groups but its not coming up in HRTMC searches.
apprecite any help..
Mani

Similar Messages

Embedded Search - no delta Indexing

Hi Experts,
i want to configure Embedded Search in CRM 7.0. TREX is well configured and all Embedded Search configuration steps are done. I created all BO-Connectors in ESH_COCKPIT. But now I can`t start delta indexing (Actions-Schedule Indexing) because the Button is grey. The status of the connectors is new.
I also tried scheduling indexing with the report ESH_ADM_INDEX_ALL_SC, but it takes no effect.
What should i do?
Thanks,
Tobi

you mean on 7.0 and now you are on 7.1. Can you please be specific as i am also facing the same problem. i am on TREX 7.1 and tried report 'ESH_IX_PROCESS_CHANGE_POINTERS' but no any effact on trex search result. I created soem new data for job family and talent groups but its not coming up in HRTMC searches.
apprecite any help..
Mani

Search Material - No Results Found after Embedded Search is configured

Hello Experts,
We have configured Search connector for Material using Embedded Search . The Search connectors are active after indexing . We have created a material using the Create CR process and we could see the approved material in MM03/ MARA table . But when I search for the material in NWBC ,it is not showing the existing material . Let me know if there is anything we could have missed.
Thanks.

Yes the report ESH_TEST_SEARCH returns no material.
So should I suspend the indexing and reschedule with with real time indexing ? I am not sure whether we choose real time indexing in the first time.
What about the authorizations, I see USER_AUTHORITY object is activealready.
Thanks

Adding custom fields to Embedded Search

Hi All,
I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
Many thanks,
Luke

Hi Luke,
I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
It would look like this once selected
OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
Hope it helps!
Regards,
Ricky Shah

MDG-Hub: Tried and tested methods for ECC customizing synchronization

MDG Experts, I am looking for guidance on synchronizing configuration and customizing data between ECC and an MDG-Hub. I reviewed documentation on (a) synchronizing via BC set import and (b) via TMS although I was looking for a little bit more detail and steps involved in setting up ongoing synchronization between ECC and an MDG-Hub.
I am looking for experiences and suggestions on this topic. Thanks in advance.

Hello Karthik
I have used - BC sets to transport the ECC configuration to MDG. Another way is to transport the tables directly from ECC environment to MDG.
Check this -
http://wiki.scn.sap.com/wiki/display/Basis/Business+Configuration+Sets+(BC+Sets)+and+their+use?original_fqdn=wiki.sdn.sap.com
Kiran

Search configuration

hi
when i doing search in nakisa i could find any data in embedded search
can any one tell me how to configure embedded search in sap backend.what are the configuration steps please

Hi Utkarsh:
I realize I'm checking late here, and Luke obviously knows the Nakisa space like the back of his hand, but have you considered your issue is access related?
As I read through your posts here, you seem to suggest what you can't get is the employee's first and last name. So that's infotype 2. I'm not suggesting your ID lacks access to infotype 2 - I'm more suggesting the ID you indexed with lacks that access. It's unlikely that part of the search would work and part wouldn't and there would be some kind of technical issue. It seems more likely to me that even though the users you're using have access to the data, the user that did the indexing did not. Since searches hit TREX and not the actual database, the access rights of the user who actually did the indexing are more important.
If you tried the WD HRTMC_SEARCH and searched for someone by name, you would probably run into the same behavior as Nakisa, since it's using the same technology to search.
Can you look at something if you don't mind? Go to ESH_COCKPIT, then look at 'HRTMC Central Person'. Drill down to 'Physical Indices' and then scroll down to 'Name'. Over to the right now, how many records are listed under the 'Optimized'? If my theory here is accurate, that number will either be zero or a number much smaller than you would expect.
If that turns out to be right, give the ID you're indexing data with access to Infotype 2 (read access at least) and make sure they have access to object P as well (but I'm guessing you already have P from what you wrote above).
Good luck - hope that helps.
Thanks,
Chris

TREX documentation - Embedded Search

Hi everyone,
We are implemeting TREX on SAP CRM 7.
I am looking for some customizing documents on SAP sites but cannot really understand what the difference between TREX, Embedded Search and Enterprise Search. Are those different functionnalities? Are they dependant of TREX implementation?
Any tips about TREX/CRM will be appreciated,
Regards,
Anaïs

Hi Anais,
SAP Enterprise Search provides unified, comprehensive, and secure real-time access to enterprise data and information from within and outside of a company.
the Enterprise Search enables a centralized search access to all sources, i.e. users can enter their search requests and receive the search results through a single browser-based user interface (Search UI).
In TREX search, each source has a separate user interface.
To configure TREX in SAP CRM or Solman please find below link.
Full-Text Search with TREX - SAP IT Service Management on SAP Solution Manager - SCN Wiki
If any concern in configuring Software Agent Framework (SAF), please let me know.
You can also refer below document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80d3c626-b9f0-2d10-b3a5-e2e7582f3449?overridelayout=true&quicklink=index
Thanks,
Vikas.

Error for Search Configuration Tree

Hi,
On ATG 10.0.3, trying to setup Search Configuration for Result Redirection & Result Positioning as per ATG doc
http://docs.oracle.com/cd/E22630_01/Platform.1002/pdf/ATGMerchandisingBusinessGuide.pdf
Chapter #16 : Defining Search Configurations
Topic : Creating Search Configurations
Page #161
Since "Base Search Configuration" is optional so directly trying to create "Search Configuration Tree" through "Administer Commerce Search" project or "Manager Commerce Assets" projects in under Merchanding tab in BCC. Getting error as following: I guess some configuration is missing.Any solution?
Encountered null property value:
component= /atg/search/web/assetmanager/SearchConfigFormHandler
path= /atg/search/web/assetmanager/SearchConfigFormHandler.fieldRankingProperty.weighting
null property= fieldRankingProperty
Encountered null property value:
component= /atg/search/web/assetmanager/SearchConfigFormHandler
path= /atg/search/web/assetmanager/SearchConfigFormHandler.relevanceRankingProperty.weighting
null property= relevanceRankingProperty
Any help is appreciated.
Thanks in advance!
Mani
Edited by: user11263665 on Jul 27, 2012 1:12 PM

Hi Mani,
Were you able to fix this issue? I am also facing the same errors. I have no clue why am getting the error.
Regards,
Thiyagarajan

Embedded Search Index AND Document Security?

I'm using Adobe Acrobat Standard 8.1.7.
It appears that I cannot have both an embedded search index and restricted security (e.g., password required to change document) on the same document.
Why is that?
If I start with security ON and then attempt to embed a search index, I get below error message:
A search index can not be embedded in this document because this document has restricted security permissions.
If I start with security OFF, successfully embed a search index, and then secure the document, Acrobat "strips off" the previously embedded search index. No warning message; no feedback to end-user; just kills it!
Why are those two functions mutually exclusive? Anyone know of a work-around?
Thank you in advance!

Hi,
As to "why", that might be floating out there in Adobe's devnet space or in one of the blogs maintained by Adobe's devnet crew.
Also good to know about use of embedded index - if used, cannot apply fast web view to the PDF. It is one or the other, but not both.
Work around? I've not come across one; but, that does not mean something isn't "out there" <g>.
Be well...

Embedded LDAP configuration in Portal

Hi,
I am currently working on WL10.1MP1, and need to know the probable files involved in Embedded LDAP Configuration in the domain.
Can anyone let me know.
Regards
Lakshmi

Hi Lakshmi,
Default configurations are part of config.xml, security.xml and ldif files in security folder and files in data/LDAP folder in Admin Server.
Vishnu

Search Configuration For Endeca Workbench-3.1.0

Hi,
Please let me know how to configure Stemming and Stopwords for search in Endeca Workbench version 3.1.0 [Experience Manager] .
Thanks in Advance!!
Mallikarjun

Hi,
from the Advanced Dev Guide (you should find that documentation on Oracle Doc website) :
- Enabling stemming
Stemming is enabled in Developer Studio.
To enable stemming for one or more languages in your project:
1. Open the project in Developer Studio.
2. In the Project Explorer, expand Search Configuration.
3. Double-click Stemming to display the Stemming editor.
4. Check one or more of the language check boxes on the list.
5. Click OK.
To disable stemming, use the above procedure, but uncheck the languages for which you do not want
stemming.
- Stopwords are defined using ex-Workbench new Experience Manager (when you logg into you application you have a feature dedicated for that)
hope that helps
regards
Saleh

Searching for Easy DMS documents using embedded search

Dear Experts,
we are using easy dms to manage documents. As far as I know it should be possible to index these documents using TREX.
-it is possible to perform a search for these documents using Embedded Search an get the search results as XML (a documentation would be very helpful)?
-how can the security be taken into account? Is there a method like AUTHORITHY_CHECK by SeS to perform security check?
thanks a lot for your help
kind regards
Nicolai

I found that authorization checks can be performed using the following authorization objects:
-Authorization Object C_DRAW_TCD (Activities for Documents)
-Authorization Object C_DRAW_TCS (Status Dependent Authorization)
-Authorization Object C_DRAW_STA (Document Status)
-Authorization Object C_DRAW_BGR (Authorization Group)
-Authorization Object C_DRAW_DOK (Document Access)
-Authorization Object C_DRAD_OBJ (Object Link)
I could not find any information regarding my first question

Integrate with SES: connector approach or embedded search approach

hi Experts:
According to the document, we have 2 options to integrate ECM11g with SES11g:
* SES connector approach
* embedded search approach
My customer needs to use a unified search engine to search ECM, internal web and file system, so SES should be used with ECM, question is which approach should be taken, what is the difference?
Best regards

Hi
SES connector approach
In this case SES and UCM have different DB schemas and for SES to search contents of UCM the feeds are created by SES Crawler Export component and placed in SES home location for it to read . It is a 2 stage approach viz 1. UCM creating the feeds 2. SES Crawling the feeds so that search can retrieve results .
Embedded search approach :
With this UCM schema is the same as SES one so that SES acts as the search indexer engine for UCM . Moment contents are checked in to UCM indexes are created on the common DB schema so that SES can directly search / display the contents from UCM .
In my view you should go for Embedded SES Search engine approach.
Thanks
Srinath

SES vs Embedded search

Hi All,
I have couple of questions..
1. What will be the main feature of embedded search over SES?
2. My requriement is , for example i have a document like sales order and want to index , after initial indexing of all documents.
for example if we change only item level data, then i want to index only that part of data, so that means delta indexing at really the node level not the entire document level.
In ses what i observed is we always have to do indexing for entire document,I think in Enterprise search indexing we can define nodes with relationsihp , seems to be we can achieve this , is that right? or by SES also we can achieve this? i do not see any examples like that in Netweaver 701 release.
Thanks and Regards,
Shiva.

Hi,
you wrote
"SES can be used ONLY for SAP ERP business object, whereas Embedded Search can be used by SAP ERP as well other SAP Business Suite applications. Is that the only one difference?"
well you can use SES and embedded search not only for ERP, you can as well use both for other SAP Business Suites like CRM. But only in ERP there are out-of-the-box some business objects defined for searching via SES. SES and embedded search are part of AS ABAP.
SES is available with NW 7.0 and Embedded Search is available with SAP Business Suite 7.0 (NW 7.01).
The most important part is:
The successor framework of SES is "Embedded Search".
see as well
Note 1254901 - SES for customer projects on TREX search
Best regards
Frank

TREX 7.1 Embedded Search for PLM

Hi there,
Currently we have TREX Server 7.00 Build 49
However, I am bit of confused with the following notes "Note 1249465 - TREX 7.1: Installing TREX for Embedded Search", where they are talking about TREX 7.10...Is that mean we cannot use the Currently installed TREX 7.00 Build 49 for Embedded search PLM? or Do we need to do a fresh install of TREX 7.10 Embedded search separately on a server for PLM Search?
Any thoughts would be appreciated.
Thanks in advance
Kumar

Hi Frank,
I have a quick question regards to High Availability for TREX 7.1. I have read the most part of the documentation for "SAP NetWeaver Standalone Engine Search and Classification TREX 7.10 on multiple hosts"
[TREX 7.10 on Multiple hosts|https://websmp203.sap-ag.de/~sapidb/011000358700000854982007E/TREX71InstallMultipleHosts.pdf]
I would like to get your thoughts on what I am planning to put together. We have 2 physical server with 8 CPUs, 32 GB memory each, with a network storage for Centralized Storage to make it HA. To make it HA, we need at least
1 Master
1 Backup
2 Slaves
For an example:
Server 1 host: SAPTREX1
Server 2 host: SAPTREX2
Do all of them needs to be installed on a separate OWN hosts? or can I install Master and First Slave on the SAPTREX1 and then Backup and Second Slave on the SAPTREX2. Is this is something possible?
Please let me know what do you think about this.
Thanks in advance.
Kumar
or Can I install the Master and Backup on a

MDG Hub Embedded Search configuration

Similar Messages

Maybe you are looking for