MDM 1.6.x Web Service: SAML?

Anyone know whether MDM 1.6.x Web Services can you SAML?

The only stable WS within MDM 1.6.x so far is AdapterWS.asmx.
WS-Security token are accepted/authenticated on IIS 7, SAML would be something worth testing.

Similar Messages

Problem call Web Service SAML on PI 7.0

Hi experts,
I have a problem very estrange on one scenario and maybe somebody could help me:
Our PI version is 7.0.
The BPM has got the following steps:
- Call WebService for get the SAML. Message Synchronous with request and response Authentification.
- We add the Authentification Response on Envelope message.
- Call web Service with Envelope, inside of this one there is the Authentification (step 1).
The las Web Service always returns that the Authentification is error.
We execute the same steps manually using SAOPGui program ( a free program for test WebService ) and the same steps works.. and the structures are the same, but on PI 7.0 never works.
We researh on forums and we have seen that the SAML Authentification is soported only for PI 7.1.
Could anybody confirm it? It is possible use SAML Authentification on PI 7.0? Are there other process to execute a SAML WebService using PI 7.0?
Any response or any idea will be very appreciated.
Thank you very much...
Regards,
Gemma

It is possible use SAML Authentification on PI 7.0?
at least the help section on 7.0 mentions the use of SAML...check this link
http://help.sap.com/saphelp_nw70/helpdata/EN/47/2388909a1d2de9e10000000a1553f7/frameset.htm
Regards,
Abhishek.

Using Contract with SRM-MDM using several Web Service ID's

Dear Experts,
ALL of our Contracts were created and still being created by adopting products from CCM, meaning BBP_PDIGP-CATALOGID holds the Web Service ID and BBP_PDIGP-CATALOGITEM holds the Catalog Item GUID.
When trying to create a Shopping Cart by selecting a Product from CCM and adopting it to the SC the system will assign the contract as a source of supply for this Product (of course if this product was
assigned to only one contact, alternatively if it was assigned to several contracts, all of those contracts will appear as available sources of supplies).
When trying to create a Shopping Cart by selecting a Product from the Internal Goods/Services and adopting it to the SC the system will assign the contract as a source of supply for this Product.
All the above is an acceptable system behavior.
Now we start testing the use of SRM-MDM in order to replace CCM, the problems weu2019ve notice are:
1. A product B1 that was assigned to a Contract using CCM is add to a SC from SRM-MDM catalog (a different Web Service ID), the result was that no Source of Supply was assigned to the Product B1 in the SC although only one released Contract exist in the system for the selected product B1.
2. The Central Purchasing department created a NEW contract by selecting a product A1 from SRM-MDM catalog; the Web Service ID is MDM1 assigned to a Named Search MDM_NS_1 allowing the user to see all items in the catalog. Now an end user, who is restricted to view only a part of the items in the catalog, is creating a SC by selecting the product A1 from SRM-MDM catalog; the Web Service ID is RESTRICT_MDM1 assigned to a Named Search RESTRICT_MDM_NS_1 allowing the user to see only a
part of the items in the catalog, the result was that no Source of Supply was assigned to the Product A1 in the SC although only one released Contract exist in the system for the selected product A1.
I found that the problem is in FM BBP_PD_INDEX_FIND in form FUND_ITEMS_ANALYZE where there is a determination for a valid entries according to search criteria that one of those is the Catalog ID.
Please share your thoughts about this problem and how i can overcame it.
Kind Regards,
Raz
Edited by: Raz Golan on Feb 26, 2009 11:57 AM

Hi,
Use this also
SAP Note- 0000927215 Contract is not proposed as valid source of supply
Regards,
Sachin

How to pass credentials/saml token access sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication

How to pass credentials/saml token exchange to the sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication
Identity provider here is Oracle identity provider
harika kakkireni

Hi,
The following materials for your reference:
Consuming List.asmx on a claims based sharepoint site
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f965c1ee-4017-4066-ad0f-a4f56cd0e8da/consuming-listasmx-on-a-claims-based-sharepoint-site?forum=sharepointcustomizationprevious
Sharepoint Claims based authentication and Single Sign on
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2dfc1fdc-abc0-4fad-a414-302f52c1178b/sharepoint-claims-based-authentication-and-single-sign-on?forum=sharepointadminprevious
Sharepoint Claim Based Authentication Web Service issuehttp://social.msdn.microsoft.com/Forums/office/en-US/dd4cc581-863c-439f-938f-948809dd18db/sharepoint-claim-based-authentication-web-service-issue?forum=sharepointgeneralprevious
Best Regards
Dennis Guo
TechNet Community Support

Web Service Security with SAML - Invalid XML signature

Hello together,
we want to build a scenario where we want to use Web Service Security with SAML.
The scenario will be
WS Client (Java Application) -> WS Adapter -> Integration Engine -> WS Adapter-> CRM (Web AS ABAP 7.01 SP 3)
SAP PI release is 7.11 (SP Level 4)
We want to use the SAML Authentification from WS Client to PI and from PI to Web AS ABAP.
The SAML authentifications between the WS Client and PI works when there is no SAML auth between PI and CRM.
But we get following error at calling the CRM system when we want to communicate with SAML:
<E_TEXT>CX_WS_SECURITY_FAULT:Invalid XML signature</E_TEXT>
Has somebody an idea of the possible reason for the error.
Thanks in advance
Stefan

Error Messages in the Trace/Log Viewer:
CX_WS_SECURITY_FAULT : Invalid XML signature | program: CL_ST_CRYPTO==================CP include: CL_ST_CRYPTO==================CM00G line: 48
A SOAP Runtime Core Exception occurred in method CL_ST_CRYPTO==================CM00G of class CL_ST_CRYPTO==================CP at position id 48 with internal error id 1001 and error text CX_WS_SECURITY_FAULT:Invalid XML signature (fault location is 1 ).
Invalid XML signature

Error While Activating BI Web service data source based on MDM XI.

Dear experts,
Need help with an error that i am getting for a BI data source based on XI MDM. An extra field was added in the data source as part of business requirement and it works fine in dev environment but when we transported the changes to Q environment it is always giving following error.
The web-service based communication structure in the data source in QA is not getting updated with the new field in the target system.
Any inputs or pointers would be appreciated.
Thanks,
Abhishek

Many thanks for your help. This solved the issue for our .NET code, however the leak is still present in the report designer. I was also wondering if you could help further: because of the limits on the java memory process is there a way to ensure that a separate java process is started for each report that is loaded in my report viewers collection? Essentially the desktop application that i have created uses a tab control to display each type report, so each tab goes through the following code when displaying a report and closing a tab:
Is there a way to ensure that a different Java process is kicked off each time that I display a different report? My current code in c# always uses the same Java process so the memory ramps up. The code to load the report and then dispose of the report through closing the tab (and now the Java process) looks like this:
    private void LoadCrystalReport(string FullReportName)
      ReportDocument reportDoc = new ReportDocument();
      reportDoc.Load(FullReportName, OpenReportMethod.OpenReportByTempCopy);
      this.crystalReportViewer1.ReportSource = reportDoc;
    private void DisposeCrystalReportObject()
      if (crystalReportViewer1.ReportSource != null)
        ReportDocument report = (ReportDocument)crystalReportViewer1.ReportSource;
        foreach (Table table in report.Database.Tables)
          table.Dispose();
        report.Database.Dispose();
        report.Close();
        report.Dispose();
        GC.Collect();
Thanks

Using SAML policy while invoking a web service

I have to invoke a webservice which is secured using the policy wss10_saml_token_client_policy.
In order to achieve the above i have creates a stub using JAX-WS and while invoking the web service I pass the policy as a SecurityFeature.Code snippet given below:
SecurityPolicyFeature[] securityFeatures = new SecurityPolicyFeature[] { new SecurityPolicyFeature(
getValueFromPropertyFile("oracle/wss10_saml_token_client_policy"))};
SomeStub stub =(UserManagementPortTypev1_0)SomeService.getPort("...","....",securityFeatures );
Once deployed in weblogic and when i invoke the service, the soap request formed is correct. It creates for me the soap header with the correct security nodes. The header formed is like below:
<S:Header>
<work:WorkContext xmlns:work="http://oracle.com/weblogic/soap/workarea/">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</work:WorkContext>
<wsse:Security S:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<saml:Assertion AssertionID="SAML-L0r20MS5CV0y7B6zHnGX5w22" IssueInstant="2011-05-10T05:03:49Z" Issuer="www.oracle.com" MajorVersion="1" MinorVersion="1" xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
<saml:Conditions NotBefore="2011-05-10T05:03:49Z" NotOnOrAfter="2011-05-10T05:08:49Z"/>
<saml:AuthenticationStatement AuthenticationInstant="2011-05-10T05:03:49Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
<saml:Subject>
*<saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">anonymous</saml:NameIdentifier>* <saml:SubjectConfirmation>
<saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
</saml:SubjectConfirmation>
</saml:Subject>
</saml:AuthenticationStatement>
</saml:Assertion>
</wsse:Security>
</S:Header>
The node NameIdentifier is supposed to be populated with the logged in user id, which will be picked up from JAAS principal.
Now I am invoking the service hosted in weblogic from outside using JSON protocol, I do not have a portal ready to invoke the service.
My question is, is there any way in which i can replicate/ simulate the JAAS principal such that the nameidentifier is populated even when invoked from outside. THis is a requirement from testing perspective.

Hi,
Thanx it is working now.
BTW can you give me some urls with info of this kind of setting which i need to do for other kind of integarions in J2EE platform.Sorry if i am asking too much as i am a starter in this technology.

MDM Web Service Generator - How to Call WS in Java?

Hi there,
I have generated a web service by navigating to http://<server>:<port>/mdm/wsgenerator - The web service is succesfully generated and deployed. I can easily test the web service using the WS Navigator (http://<server>:<port>/wsnavigator).
I am now trying to use NWDS7.2 to create a wrapper web service, and need to call my generated MDM WS using Java code. I have created a CAF project, and imported the MDM web service using the WSDL. I have created an application service and no matter what I try, I cannot get the MDM web service to instantiate.
Is there anyone that has done this before? What method should be used?
All I need to know is how to create an instance of the generated MDM web service - There is no obvious constructor to use. See my code below, but this creates an exception at runtime for "IndexOutOfBoundsException". Note that the web service I generated is called "MdmWfProjectUpdate"
service = new MdmWfProjectUpdateViDefaultService(
                              new java.net.URL(
                                          "http://<server>:<port>/MdmWfProjectUpdate/HTTPBasic?wsdl"),
                              new javax.xml.namespace.QName(
                                          "urn:MdmWfProjectUpdateWsd/HTTPNone", "MdmWfProjectUpdateVi_DefaultService"));
I can call other web services without a problem in my code, so it is quite confusing that I cannot get this to work...
Any help will be appreciated!

Hi david ,
When u imported this webservice,there will be lot of classes generated .In these classes some are executable classes.Like if your webservice contain some operations like update,create,delete.
then for each operation tere will be one executable class generated.
this class must have some function like execute or invoke.You have to call this function in order to get the results.
Just check whether is there any such class generated or not.
Kindly revert back with your results.
Thanks,
sudhanshu

MDM SP4 Web Services Not able to Connect

Hello,
I am trying to use standard MDM SP4 webservice.
I deployed MDM_WEB_SERVICES_550.sca and also did required setting in visual composer as mentioned in the follwing blog.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a97ac6-c884-2910-c6ad-bae0de29e67b">MDM SP4 Web Services.</a>
But,When I am testing <b>mdmsearch</b> webservice with correct repository,port,mdm server details with other required parametes as mentioned in the blog. I am getting the follwing error.
Problem while connecting to MDM repository "MyRep" on server "myserver" at port "2311". Maybe the Repository-Information has not been set correctly at the requested query!
To confirm the connection parameters,I wrote sample java program using mdm java api and run from the was server and i am able to connect to the same.
Is there other sca files need to be deployed on WAS to work with sp4 standard web services.

Hello,
Yes..I changed the properties file in VC as mentioned in the blog. (I also mailed u the vc screen shot)
I also added read_only user in mdm respective repository.
But,not able to get resultset from mdmsearch webservice.
Please help me..
Regards,
Raju.

MDM 5.5 SP04 Java API and Web Service Documentation

Is there documentation available that reflects the SP04 changes to the Java API, and the web services that are now available?
As of this morning, service marketplace contained spotty SP04 docs.
Thanks in advance,
Mike

Mike,
A cookbook would be wonderful (I think our developers would throw a party)!
An updated object model (as a preface to the user guide) for the legacy API (MDM4J.jar) AND the new "rebranded" API (mdm-*.jar) would also work.
I've been reduced to comparing the SP3 & SP4 javadocs
One fun approach that appears to be working for us, is to model each process using the DataManager, and try to duplicate that exactly via the corresponding API objects (e.g. the simple Connect-Find Table-Search Table-View Result Set-View Record-CheckOut/Upsert/Validate/CheckIn dance). New features in the DataManager reveal themselves a little more readily
Good luck,
...Dee

MDM Server Password Parameter in SRM Web Service for SRM MDM Catalog 2.0

Hi Experts,
We have password set on our MDM server. I am little confused about how to define MDM server password parameter in external Web service Call structure in SRM System for SRM MDM Catalog 2.0.
Will Catalog webservice work, if we don;t define password for MDM server in webservice??if No, then please let me know how to define MDM server password in SRM websevice.
Any help will be highly appreciated.
Thanks,
Shiv

Hi Shiv,
The MDM Server password is needed when you are changing Webdynpro UI Configuration.
For catalogs, all you need is the repository userid/password parameters in the call structutre.
SG

Can MDM Web Services return qualifier values?

We are running MDM 5.5 SP06 Patch04 (we will be doing a technical upgrade to MDM 7 later this year).
I am investigating the MDM web services and came upon a potential problem. In the test harness, I searched for a record, specifying ALL for the result definition and everything seemed to come back except qualifiers; lookup values came back, taxonomy values came back, qualified lookup display values came back, qualified link ids came back, but no qualifier values.
I searched again on the qualified link record ids in the qualified lookup table and I got the non-qualifiers, which is the expected behavior. The qualifiers have to come back with the main table record, though.
Are qualifiers not fully supported in the MDM 5.5 web services, or am I not searching properly?
Thanks for any help you can provide.
Doug

Hi Doug
For me all are working good.
Can you look at pages 24-26 from "Portal content development guide"
https://websmp201.sap-ag.de/~sapidb/011000358700001119612007E
Regards
Kanstantsin

Problem with signed SAML assertion and Web Services Manager

Folks,
I’m having some issues trying to generate a proper signed SAML assertion using JDeveloper 10.1.3. I am securing a java proxy class using the wizard as described in http://www.oracle.com/technology/products/jdev/howtos/1013/wssecure/10gwssecurity_howto.html .
On the OWSM side, I have a service that I am securing with SAML - Verify WSS 1.0 Token. If I set the "Allow signed assertions only" property to false I can complete the service call. However, when it is set to true I am receiving the following fault: javax.xml.rpc.soap.SOAPFaultException: SAML token verification failed.
When I examine the message going to OWSM in a packet analyzer, it is missing the signature in the SAML assertion. The <saml:Assertion> tags looks like:
      <saml:Assertion MajorVersion="1" MinorVersion="1"
                      xmlns="urn:oasis:names:tc:SAML:1.0:assertion"
                      xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion"
                      AssertionID="yM0oqZgF0N1a1td6yzKgOQ22"
                      IssueInstant="2007-01-23T17:15:27Z"
                      Issuer="HealthMarkets_s3">
        <saml:Conditions NotBefore="2007-01-23T17:15:27Z"
                         NotOnOrAfter="2007-01-24T17:15:27Z"/>
        <saml:AuthenticationStatement AuthenticationInstant="2007-01-23T17:15:27Z"
                                      AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
          <saml:Subject>
            <saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">client_s3</saml:NameIdentifier>
            <saml:SubjectConfirmation>
              <saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
            </saml:SubjectConfirmation>
          </saml:Subject>
        </saml:AuthenticationStatement>
      </saml:AssertionI have selected the Sign Outbound Messages in step 3 of the Secure Web Proxy Wizard. This step uses the DSA-SHA1 algorithm.
Any help is greatly appreciated.
Thanks in advance,
Joseph

Thanks for the response. I am not using any pages for this application yet... just calling the web service from SOAP UI or any Web Service testing tool causes the problem.
All that has to be done to replicate it is to build a simple EJB 3.0 JPA bean using the entities from tables wizard and then add named query as follows:
@NamedQuery(name = "BomHeader.findByDesc", query = "select o from BomHeader o where o.bomDesc like :p_bomDesc")
then build a session bean with the wizard that includes the JPA persistence unit and the entity and subsequently use the wizard to wrap the session bean in a web service.
The whole replication process should take 5 minutes if you have some database tables to work with. It breaks when the web service is called.
Thanks in advance

Can MDM web service search results be filtered by tuple values?

We are currently working with MDM 7.1 SP03 and Netweaver 7.0. Right now, there is a requirement to return a material record from MDM to a Web Dynpro form using the MDM search web service. The other requirement is that the form user can search for a material using material number, sales org and dist channel. Currently, the results include all sales org/dist channel combinations in the material record. Is there a way to filter the results so that only the specified sales org and dist channel are returned to the form by using the web service? For example, if a material record has 2 sales orgs with different dist channels and the user is only interested in one, is it possible for the web service to return the material record and only the one sales org? Or, does this need to be handled by the form? Thanks for any input.

Hello Steven,
currently there is no filter functionality in MDM Web services 7.1 for tuple values or qualified
lookup values.
For the next MDM release we are planning to have a new operation for retrieving multi tuple
values as standalone operation, by which the user will be able to filter the
tuple values by member field's criteria.
Regards,
Matthias

MDM Web Services

Hi,
I need to consume the WS provided by sap for MDM, when I try to create a WS Model it throws an exception and ask me to check the log files, which I'll paste in the end of the post.
I've tested the web service with the portal tool and it works,'I've also used the XML Spy and it created a SOAP call with the WSDL provided by the WS Navigator of the SAP, and also tried to create a WS Client Proxy and it worked, any one know if there is any restriction in the WSDL?
Thanks and regards,
Eduardo
!STACK 0
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WSDL URL 'http://portaldev00:50000/MDMSearchRecords/Config1/bindings?wsdl&style=document&mode=sap_wsdl' and service factory configuration '{DynamicProxy.ClassPath=C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.cmi_1.0.0/_cmi_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.exception_2.0.0/lib/exception.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/boot.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/iq-lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/util.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/webservices_api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.engine.webservices_2.0.0/lib/tc_sec_wssec_lib.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.runtime_2.0.0/lib/SapDictionaryTypesRuntime.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.dictionary.services_2.0.0/lib/SapDictionaryTypeServices.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/logging.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/loggingStandard.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.logging_2.0.0/lib/jARM.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.tssap.sap.libs.xmltoolkit_2.0.0/lib/sapxmltoolkit.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/activation.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxm-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/saaj-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jaxrpc-api.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jnet.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/jsse.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.ext.libs.webservices_2.0.0/lib/mail.jar;C:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.webdynpro.model.webservice_2.0.0/lib/_webdynpro_model_webservice.jar;, DynamicProxy.INetProxy.Bypass=, DynamicProxy.INetProxy.Port=, DynamicProxy.Javac.path=C:\Program Files\Java, DynamicProxy.TempDir=C:\DOCUME1\Eduardo\LOCALS1\Temp\, DynamicProxy.INetProxy.Host=}'
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:414)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.readOperationsFromWSDL(WSModelInfo.java:372)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadataInternal(WSModelInfo.java:342)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:306)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.importMetadata(WSModelInfo.java:316)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.PageRenameWS.loadNameSpacesAndModelClasses(PageRenameWS.java:435)
     at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:105)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
     at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
     at org.eclipse.jface.window.Window.open(Window.java:563)
     at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
     at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
     at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
     at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
     at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
     at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
     at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
     at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
     at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:150)
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:50)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:88)
     at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:412)
     ... 53 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Proxy generation problem. See nested exception.
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:284)
     at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:147)
     ... 56 more
Caused by: java.io.IOException: CreateProcess: javac "@C:\Documents and Settings\Eduardo\Local Settings\Temp\DGenService1233062464248\javac_args1.cfg" error=2
     at java.lang.Win32Process.create(Native Method)
     at java.lang.Win32Process.<init>(Unknown Source)
     at java.lang.Runtime.execInternal(Native Method)
     at java.lang.Runtime.exec(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at java.lang.Runtime.exec(Unknown Source)
     at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compileExternal(PackageBuilder.java:386)
     at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.traversThrough(PackageBuilder.java:291)
     at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compileExternal(PackageBuilder.java:485)
     at com.sap.engine.services.webservices.jaxrpc.util.PackageBuilder.compilePackage(PackageBuilder.java:215)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:271)
     ... 57 more

Hi Murtuza,
I've tried to download it, but the WSDL import another which with others wsdl like this:
URL
http://portal_dev:50000/MDMSearchRecords/Config1?wsdl
Refers
<wsdl:import location="http://portal_dev:50000/MDMSearchRecords/Config1/bindings?wsdl&style=document" namespace="urn:MDMSearchRecordsWsd/Config1/document" />
URL
http://portal_dev:50000/MDMSearchRecords/Config1/bindings?wsdl&style=document
Refers
<wsdl:import location="http://portal_dev:50000/MDMSearchRecords/Config1/porttypes?wsdl&style=document" namespace="urn:MDMSearchRecordsWsd/MDMSearchRecordsVi/document" />
And when I downloaded the WSDL from the Web Service Navigator it gives me a zip file I've already tried to import that but got the same error, any idea?
Thanks and Regards,
Eduardo

MDM 1.6.x Web Service: SAML?

Similar Messages

Maybe you are looking for