MDM Specific XI message types.XI Content BI Cont 3.53
Hi,
I am working on XI and BI integration with MDM.
Can you please tell me what all prerequisites do I need?
I have one document which has mentioned that I would need "MDM Specific XI message types.XI Content BI Cont 3.53".
Can you please elaborate me on this?
Please help me.
Hi,
Once you have downloaded the business content as Michal said, you need to import it into your Integration repository. I believer the file that you downloaded will be a .zip file... Unzip if you will have a .tpz file.
You copy that file into your XI server under ..\repository_server\import. Then when you select the Import Design Option from your IR menu you will find the file that you placed there. Just select it and import into your IR.
Thanks,
Prakash
Similar Messages
-
I'm writing my first BizTalk application base on the EAI Tutorial and getting the error
Finding the document specification by message type "ProductCatalogInformation" failed.
My schema has been deployed and is as follows.
<?xml version="1.0" encoding="utf-16" ?>
- <xs:schema xmlns="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:b="http-colon-backslash-baclslash-schemas.microsoft.com/BizTalk/2003" targetNamespace="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:xs="http-colon-backslash-baclslash-www.w3.org/2001/XMLSchema">
- <xs:element name="ProductCatalogInformation">
- <xs:complexType>
- <xs:sequence>
<xs:element name="GlobalDocumentFunctionCode" type="xs:string" />
<xs:element name="CatalogTypeCode" type="xs:string" />
<xs:element name="GlobalActionCode" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
My XML is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ProductCatalogInformation>
<GlobalDocumentFunctionCode>Request</GlobalDocumentFunctionCode>
<CatalogTypeCode>Partial</CatalogTypeCode>
<GlobalActionCode>Revise</GlobalActionCode>
</ProductCatalogInformation>
The error I get is
There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "XML disassembler" Receive
Port: "MondaySolutionRequestPort" URI: "C:\BizTalk\Receive\*.xml" Reason: Finding the document specification by message type "ProductCatalogInformation" failed. Verify the schema deployed properly.
Suggestions please?
Is there a link where I can download the completed solution to the BizTalk Server Tutorial 1 Enterprise Application Integration ?
Thanks in advance..1) Check the GAC and ensure that the schema is there, be sure the version numbers are the same.
2) You should also restart the host instance and try again.
To check that the schema exists and is deployed properly open the query analyser on your BizTalk Server and
use the BizTalkMgmtDb and run the query below. In the where clause place the correct target namespace and root node name which is being reported in the error log from the Event Viewer.
Select msgtype, assemblyid, clr_namespace, clr_assemblyname
from bt_documentspec
where msgtype = targetnamespace#rootnode;
3) Check the sample XML, its without namespace. Generate instance from the schema and then try.
Should be
<ProductCatalogInformation xmlns="http://MondaySchemas.Schema1"><\ProductCatalogInformation>
What
you need to do to fix "There was a failure executing the receive pipeline… failed to load. Verify the schema for this document specification is deployed and is in the Global Assembly Cache" Error after deploying BizTalk Solution
You can get everything you need to learn about BizTalk here at Learning
about BizTalk Server has never been easier now with the TechNet Wiki
Here is the solution: BizTalk
Server Tutorials--Tutorial 1: Enterprise Application Integration
Video at Biztalk
Server 2010: Enterprise Application Integration (EAI) Video Tutorials
Rachit -
Can not generate one xsd file for message type in xi
Dear Experts.
I am not able to generate one XSD file from message type from XI 3.0, When i select message type and go to XSD tab then click on export xsd to file, it is generating two xsd files MainSchema.xsd, Schema1.xsd into one zip file, but i need only one xsd file to import it into MDM.
Could you please help
Thanks and Regards.
Sravya.
The following are the two files. MainSchema.xsd, Schema1.xsd .Hi Harsha,
Thanks lot for the immediate response. Appreciate it.
Now I am able to generate the one xsd with your inputs , but i am not able to load it into mdm with out any changes in the generated XSD from Message Type. the below is only the original root tag, where modification required.
Original Element : MDM_CUST_MASTER_FILE_REQUEST_MT
==============
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:abc.com:MDM_Customer_Master_ECC" targetNamespace="urn:abc.com:MDM_Customer_Master_ECC">
<xsd:element name="MDM_CUST_MASTER_FILE_REQUEST_MT" type="MDM_CUST_MASTER_FILE_REQUEST_DT" />
etc.
Case :.When i modify the above element as below with out xmlns, targetNamespace
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="MDM_CUST_MASTER_FILE_REQUEST_MT" type="MDM_CUST_MASTER_FILE_REQUEST_DT" />
I can import xsd into mdm with the above modification.
The generated XML out put File from mdm is having message type tag like below
?xml version="1.0" encoding="UTF-8"?>
<MDM_CUST_MASTER_FILE_REQUEST_MT>
<CUSTOMER> </customer> ...
note: no namespace for message type
Result:
1.When i send this xml file into XI it is failing in message mapping because it doesn't have namespace attached to it and failing in message mapping.
Finally i need your help to generate the xsd or data file like below to avoid mapping problem in xi.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MDM_CUST_MASTER_FILE_REQUEST_MT xmlns:ns0=urn:abc.com:MDM_Customer_Master_ECC>
Appreciate your help.
Thanks and Regards.
Sravya. -
Generate an additional iDoc message type when calling BD12
How can a specific iDoc message type be generated (in addition to the other iDocs) when calling BD12 with specific output type?
I would like that all iDocs belonging to one serialization group will be generated when calling BD12. is that possible?
Thank you in advance,
AsmaaHi,
Kinldy check the links which are useful to you.
http://www.beinsoft.com/articles/sap-tutorial-ale-distribution-model2.php
Thanks,
Ramesh -
Specific process code for Production order message type LOIPRO
Hello,
Is there any specific process code for Production order message type LOIPRO.
Request you to reply.
Thanks
PrashanthHi Prashanth,
sorry for last thread ... that not contain full information ...
For message type LOIPRO you can use process code APLI.
In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff.. http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
Regards,
Amit -
Reduced matmas message type data transfer to mdm
Hello ,
I have scenario where I have reduced matmas message type (Zervicematmas) and it is linked to matmas05.I want to transfer this data using mdm_clnt_extr.
Uptill now my understanding is that mdm_clnt_extr can transfer data for standarad
message type as(DEBMDM,MATMAS).
if yes , pl suggest what config has to be done on ECC6.0.
thanks in advance,
SharadaThanks for the help,
As per your suggestion one can select sengment to be transfered at the time of creating a variant of Extraction.
My scenario is that I have to create a custome message type ZSERVICEMATMAS for transferring data to MDM and standard MATMAS will be used to trnasfer data to other third party system.
Now here MDM_CLNT_EXTR is able to give me idoc wrt MATMAS message type and MATMAS05 idoc type.
I want MDM_CLNT_EXTR should create idoc for ZSERVICEMATMAS meesage type and MATMAS05 is idoc type.
I have checked for exits is MATERIAL_extract FM where I can give this message type, but didnt got any clue.
Pl can you suggest on this.
thanks,
Sharada -
Variable initialized with wrong message type
Hi,
I have a BPEL process variableA of Message type A as defined in the partnerlink WSDL file. This variable get initialized during operation A from the partnerlink. The WSDL has another message type B defined for another operation B.
During runtime when operation A is called variable A gets initialized with message type A, however when operation B is invoked with mesage type B variableA gets initialized again with the content of message type B even though it's defined to be of message type A. Below are the snippets from the WSDL and BPEL process file
WSDL file ..
<message name="MessageTypeA">
<part name="payload" element="mpx:MessageARequest"/>
</message>
<message name="MessageTypeB">
<part name="payload" element="mpx:MessageBRequest"/>
</message>
<portType name="MutilPort">
<operation name="A">
<input message="tns:MessageTypeA"/>
</operation>
<operation name="BA">
<input message="tns:MessageTypeB"/>
</operation>
</portType>
Process BPEL file
<variable name="VariableA"
messageType="tns1:MessageTypeA"/>
<variable name="VariableB"
messageType="tns1:MessageTypeB"/>
<pick name="Pick_2" createInstance="yes">
<onMessage portType="tns1:MutilPort" operation="square"
variable="VariableA" partnerLink="Multiplex">
<sequence name="Sequence_1">
<assign name="Assign_2">
<copy>
<from variable="VariableA" part="payload"
query="/ns1:MessageARequest/ns1:Operand1"/>
<to variable="ResponseVariable" part="payload"
query="/ns1:AllOpProcessResponse/ns1:Result1"/>
</copy>
</assign>
</sequence>
</onMessage>
<onMessage portType="tns1:MutilPort" operation="addition"
variable="VariableB" partnerLink="Multiplex">
<sequence name="Sequence_2">
<assign name="Assign_1">
<copy>
<from variable="VariableB" part="payload"
query="/ns1:MessageBRequest/ns1:Operand5"/>
<to variable="ResponseVariable" part="payload"
query="/ns1:AllOpProcessResponse/ns1:Result1"/>
</copy>
</assign>
</sequence>
</onMessage>
</pick>
Please can anyone shed some light on why and how this can happen and where is it going wrong.
Thanks,
ShishirLooks like the destination which is used by your EG has default settings,
particulary the RedeliveryLimit param. If it is set to -1 (default setting)
WL will try to redeliver the message forever in case of any error. Just set
it to something else. You can also specify an ErrorDestination and hadle
error messages specifically in it.
Denis.
<Gunjan Shukla> wrote in message news:[email protected]..
Hi,
We are using WLI 8.1, in one of our applications I have a message broker
channel configured to listen to rawdata type messages. A jms event
generator is configured to publish messages, which are sent to a jms
topic, on this channel.
We have no control over type of messages sent by client applications, when
some client application sends an ObjectMessage instead of BytesMessage,
following error is thrown
####<Jun 1, 2006 10:47:14 AM GMT-07:00> <Error> <WLW> <P931467> <cgServer>
<ExecuteThread: '11' for queue: 'weblogic.kernel.Default'> <<anonymous>>
<BEA1-004324CB0C4F26C12C0A> <000000> <Cannot publish non-BytesMessage to
channel of type RAWDATA>
####<Jun 1, 2006 10:47:14 AM GMT-07:00> <Error> <WLI-Core> <P931467>
<cgServer> <ExecuteThread: '11' for queue: 'weblogic.kernel.Default'>
<<anonymous>> <BEA1-004324CB0C4F26C12C0A> <BEA-489048> <Not a
BytesMessage>
server keeps throwing this exception and fills the logs and ultimately
server needs to be re-started.
Can somebody point me to whether its possible to catch these exceptions in
a process?
Or alternatively is it possible to somehow ignore the messages with
mismatched message type?
Any ideas are greatly appreciated.
Thanks and regards,
Gunjan -
Xpath in BPEL: How to extract from message type to string
Hi all,
I am currently trying to extract all content from a special message type to a string. The special message is really just simple XML.
However, I wish to convert the special domain specific message to a string to send to another partnerlink.
I figured that it would be a simple matter of using an assign / copy operation using the special message and the ora:getContentAsString function.
This does not work :-(
I get the following error in the domain log:
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:getContentAsString(bpws:getVariableData('businessEventBody'))", the reason is FOTY0001: type error.
Please verify the xpath query.
Does anyone have any ideas on how to solve this?
Regards,
Aagaard<p>
Hi,
</p>
<p>
Let me explain the scenerio:
</p>
<p>
I XSD I have is:
</p>
<p>
<xs:schema xmlns:xs="<a href="http://www.w3.org/2001/XMLSchema">http://www.w3.org/2001/XMLSchema</a>"
targetNamespace="**************"
<xs:element name="OrdDesc">
<xs:complexType>
<xs:sequence>
<xs:element name="ord" type="number10" />
<xs:element name="ord_name" type="varchar2150" />
<xs:element name=ord_add1" type="varchar2240" minOccurs="0" /><br /><br /> <xs:element name="ord_add2" type="varchar2240" minOccurs="0" /><br /><br /> <xs:element name="ord_city" type="varchar2120" minOccurs="0" /><br /><br /> <xs:element name="county" type="varchar2250" minOccurs="0" /><br /><br /> </xs:sequence><br /><br /> </xs:complexType><br /><br /> </xs:element><br /><br /></xs:schema><br /></p><br /><p><br /><br /><br />The runtime XML I would get:<br /></p><br /><p><br /><br /><br /><?xml version="1.0" encoding="UTF-8" ?><br /><br /><Messages><br /><br /> <Message><br /><br /> <family>New</family><br /><br /> <type>OrderCreate</type><br /><br /> <id>22</id><br /><br /> <messageID/><br /><br /> <routingInfo/><br /><br /> <messageData><![CDATA[<!DOCTYPE *************"><br /><br /> <OrdDesc><br /><br /> <ord>22</wh><br /><br /> <ord_name>Ord1</wh_name><br /><br /> <ord_add1>Park Avenue</wh_add1><br /><br /> <ord_add2/><br /><br /> <ord_city>XYZ</wh_city><br /><br /> <county/><br /><br /> </OrdDesc>]]></messageData><br /><br /> </Message><br /><br /> <Message><br /><br /> <family>New</family><br /><br /> <type>OrderMod</type><br /><br /> <id>22</id><br /><br /> <messageID/><br /><br /> <routingInfo/><br /><br /> <messageData><![CDATA[<!DOCTYPE *************"><br /><br /> <OrdDesc><br /><br /> <ord>22</wh><br /><br /> <ord_name>Ord1</wh_name><br /><br /> <ord_add1>Park Avenue</wh_add1><br /><br /> <ord_add2/><br /><br /> <ord_city>XYZ</wh_city><br /><br /> <county/><br /><br /> </OrdDesc>]]></messageData><br /><br /> </Message><br /><br /></Messages><br /></p><br /><p><br /><br /><br />Now, the Msg type(<type>OrderCreate</type>) I am referring to is not the part of XSD, it gets generated at the time message is created. That's why I don't see that tag in the payload. Payload shows the elements of XSD. <br /></p><br /><p><br /><br /><br /><br /><br />Please help.<br /></p> -
Nhi guru's cross apps what is basic type,idoc type , message type
nhi guru's cross apps what is basic type,idoc type , message type plz help me i am larning how to work on idocs using ale explain me like realtime environment
Hi,
Hi,
i got this data from sdn .plz go thru might be helpful
IDOC is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
how to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
For creating a IDOC u need to Create a segment type in WE31.The internal table in which we store the data to be passed to the IDOc thos fielda are defined in fieldname and data element.Save and release the segment.
Create IDOC type in WE30. Give min and max types. Mark it as mandatory.
Create Message type in WE81.Assign it to a change request and save it.
Link this message type with IDOC type in WE82.
Then start your coding and pass the details of Data and control records.
Just have a look at these links:
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
Creation of IDOC:
idoc creation
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=creation%20of%20idoc&cat=sdn_all&start=11
ALE/ IDOChttp://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
i think this will helps u
<b>reward is usefull</b> -
What is fault message type in mapping
hi folks,
what is the use of fault message type in message mapping . where do we use them .please spare a little time to type rather to refer to other blogs. have a nice dayHi Bose
Fault messages are used to propogate / send back the error maessage to the calling application. This is used when there is a failue and the sending system needs to know what the error was. This is more of catching Application Errors.
Also please go through the link below to get the details for fault messages...
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
fault message is a message that describes an application-specific error situation
we have standardised fault message in XI.
Fault message types are designed for application-specific errors that occur on the inbound side and that are reported back to the sender or persisted in monitoring.
In the synchronous case, when an application-specific error occurs on the inbound side, instead of sending a response message back to the sender, the application can send a fault message to handle the error.
The fault message of the application for an asynchronous ABAP server proxy is persisted for monitoring. In the case asynchronous of Java server proxies, the fault message is part of a negative application acknowledgement
Application-specific means that the application on the inbound side triggers the error itself because, for example, the request message did not contain sufficient information
See the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
Asynchronus RFC exception handling
XI Alerts are not getting triggered from proxy servers
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
Fault Message
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
You can use Fault messages when you want to handle errors at the Inbound side ie at the destination side.
check this nice blog also
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Fault Messages
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
Usage of Fault Messages in Synchronous interfaces
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
usage of fault messages in asynchronous interfaces
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Have a look at "/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client"
for more details have a look on these links
<b>
Fault messages -</b> /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Also ref:
<b>Handling Web Service SOAP Fault Responses in SAP NetWeaver XI -</b>
/people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
check this out
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
demo - /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1 - this is sure to help you.
Thanks!!!
Regards
Abhishek Agrahari -
Hi experts
i have a following scenario. the scenario is SOAP to XI to ECC, and from XI to ECC RFC's are being used. i have doubt about the fault message types?
what are fault message types and why should they be created???
for the above required scenario does"fault message types are to be created or not" plz let me know.
Thanx in advanceHi,
>>ii have doubt about the fault message types? what are fault message types and why should they be created???
According to help.sap.com http://help.sap.com/saphelp_nwpi71/helpdata/EN/dd/b7623c6369f454e10000000a114084/content.htm
Fault message types are designed for application-specific errors that occur at the provider (inbound side) and that are reported back to the sender or persisted in monitoring.
1) In the synchronous case, when an application-specific error occurs on the inbound side, instead of sending a response message back to the sender, the application can send a fault message to handle the error.
2) The fault message of the application for an asynchronous ABAP server proxy is persisted for monitoring. In the case asynchronous of Java server proxies, the fault message is part of a negative application acknowledgment (see Acknowledgments).
>>for the above required scenario does"fault message types are to be created or not" plz let me know.
You can send the exception of RFC in Fault message type. (Provided the RFC raises an exception)
Regards
Suraj -
Can someone tell me the different types of fault message types available in XI?
Hi,
Fault Message Types
are used only for returining messages form the inobund side (application)
http://help.sap.com/saphelp_nw04/helpdata/en/dd/b7623c6369f454e10000000a114084/content.htm
if you want to create error handling for a mapping
you can use transformation step (in a BPM)
add a block and catch the mapping error inside this block
(and for instance send a file from this exception branch
Refernces Fault message types for the Exception handling .
Fault message types corresponding to the standard SOAP Fault type can be included (execepted in the outbound Asynchronous case)
A fault message is a message that describes an application-specific error situation.
Fault message types are designed for application-specific errors that occur on the inbound side and that are reported back to the sender or persisted in monitoring.
· In the synchronous case, when an application-specific error occurs on the inbound side, instead of sending a response message back to the sender, the application can send a fault message to handle the error.
· The fault message of the application for an asynchronous ABAP server proxy is persisted for monitoring. In the case asynchronous of Java server proxies, the fault message is part of a negative application acknowledgement (see Acknowledgments).
Application-specific means that the application on the inbound side triggers the error itself because, for example, the request message did not contain sufficient information.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Thanks
Swarup
Edited by: Swarup Sawant on Mar 28, 2008 3:05 PM -
Hi all,
Can i know wats the difference between Basic type and Message type??
wat s the use of having both this types????hi
Message Type:
A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterises the data sent across systems and relates to the structure of the data called an IDOC type.
Diff. with IDOC type
An IDoc type specifies the structure of the data.
A message type specifies the meaning of the data
Diff. b/w IDOC type and IDOC
An IDoc type is the definition of a specific data structure.
An IDoc is an actual instance of data based on an IDoc type. Therefore, there can be many IDocs created from a single IDoc type.
Every idoc type will have Message Type.
It mean Idoc will be recognised By message type.
For ex : MATMAS03 is idoc type, and its message type MATAMS.
There are different message type for every master data. suppose for vendor master CREMAS is the message type, for customer mast DEBMAS like these there many message type for other type of master data.
To recognise the particular idoc, we use message types.
We82 is the TCode where IDoC type is attached to Mesage tYpe.
Refer to this related thread
difference between message type and idoc type
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
Regards
Anji -
Consumer endpoints and remote operations/input message types formation
Hello,
Couple of questions;
1) In case of a BC, a consumer endpoint (i.e. a proxy for an external consumer) doesn't need to be activated with the NMR -- is this understanding correct?
2) Moreover, as the SU for this component defines a "consumes" element in the jbi.xml , but the operation is not specified in the jbi.xml (but will be specified, in a configurtion artifact that goes inside the SU, as I understand).
Now, how would the BC dynamically form an NMR message that conforms to the operation input message type of the service it's consuming ? The BC will know about the remote operation and it's input message type only upon SU deployment..
Hope I am articulating my question clearly..A binding component (BC), when dealing with a newly received request message from an external service consumer, must map the message to a particular service and operation (as defined by JBI's WSDL-based services model). How this mapping is performed depends on the nature of the protocol the BC handles, as well as the implementation of the BC.
To answer your specific questions:
1. Only provided services are activated, by the provider. Consumers (including a BC acting as a proxy for an external consumer) need only discover the service (at design- or run-time) in order to use it.
2. The SU jbi.xml exists to help design tools which wish to recompose service assemblies. The "consumes" element gives tooling information about static service dependencies of the SU. (This avoids requiring that the tooling have deep knowledge of the contents of the SU itself -- composition can be done using any SUs, regardless of how they were created.)
Recomposition of a service assembly is accomplished by matching service types, not individual operations.
3. The BC can create a NormalizedMessage (and a MessageExchange the will hold it) using three sources of information:
- The message from the external consumer
- BC configuration information (from SUs deployed to it)
- Service metadata (WSDL), as published by the service provider.
Note that in some protocols the message from the external consumer is not sufficient to determine which service and operation are required. In such cases so-called trading-partner data are needed, as part of the BC's configuration data (from SU deployments), to map an inbound request message to the service and operation needed.
So, to answer your final question (and hopefully I understand it correctly), in general the BC needs to be configured to create the external endpoint to which the external consumer can send messages. Depending on the nature of the BC, it may also need additional data about mapping messages to JBI's service-and-operation model of services. Dynamic mapping is certainly supported.
In typical binding components, the BC only "learns" of a new external endpoint that it must expose when a service unit is deployed to it. However, JBI does not restrict BC's to only using this mechanism. A BC could use a different mechanism, but this in general complicates administration and component portability.
Does that answer your questions? -
RFC dump : 'Message type " " is unknown.'
Hi everyone,
I am calling an RFC from one system to another and i am getting a dump with error :
Message type " " is unknown.
When i debugged the program the found that nothing is returned for " MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4. "
What should i do to rectify the problems? Please do help.
Thanks In Advance.
Regards,
HeeraABAP runtime errors MESSAGE_TYPE_UNKNOWN
Occurred on 03/05/2008 at 21:56:28
Message type " " is unknown.
What happened?
The current ABAP/4 program "Y_MM_C_CICS_MAT_RECON " h
because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 progra
What can you do?
Print out the error message (using the "Print" functi
and make a note of the actions and input that caused
error.
To resolve the problem, contact your
SAP system administrator.
You can print this message by choosing "Print".
Transaction ST22 allows you to display and manage sho
is especially useful if you want to keep a particular
Error analysis
Only message types A, E, I, W, S and X are allowed.
How to correct the error
If the error is in one of your own ABAP programs or an SAP program that
you have modified, try to correct it.
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"MESSAGE_TYPE_UNKNOWN"
"Y_MM_C_CICS_MAT_RECON " bzw. "Y_MM_C_CICS_MAT_RECON "
"START-OF-SELECTION"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46B"
Application server....... "fmsap591"
Network address.......... "10.19.196.114"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "2x IA64 Level 3"
Database server.......... "FMSAP591"
Database type............ "ORACLE"
Database name............ "AI0"
Database owner........... "SAPR3"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Jul 30 2007 00:11:29"
Created in............... "NT 5.0 2195 Service Pack 2 x8
Database version......... "OCI_920_SHARE__OCI_7_API "
Patch level.............. "2335"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 1
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.
Windows NT 5.2, , System build information:,
, LCHN : 921411"
User, transaction...
Client.............. 250
User................ "HPRAMANX"
Language key........ "E"
Transaction......... "SE38 "
Program............. "Y_MM_C_CICS_MAT_RECON "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "Y_MM_C_CICS_MAT_RECON " in
"START-OF-SELECTION".
The main program was "Y_MM_C_CICS_MAT_RECON ".
The termination occurred in line 371
of the source code of program "Y_MM_C_CICS_MAT_RECON " (when calling the editor
3710).
Source code extract
003410 r_lgort-sign = 'I'.
003420 r_lgort-option = 'EQ'.
003430 r_lgort-low = x_storeloc_wa-ecc_st_locn.
003440 APPEND r_lgort.
003450 ENDLOOP.
003460
003470
003480 *CALL RFC TO GET MATERIAL DATA FROM F PIPE BY PASSING S_MATNR r_werks
003490 *r_lgort S_CHARG AND GETTING THE REQUIRED DATA BACK IN THE TABLE
003500 *I_MCHBF
003510
003520 CALL FUNCTION 'YCICS_MATERIALDATA'
003530 DESTINATION 'FI0250'
003540 TABLES
003550 i_matnr = s_matnr
003560 i_werks = r_werks
003570 i_lgort = r_lgort
003580 i_charg = s_charg
003590 i_mchb = i_mchbf
003600 EXCEPTIONS
003610 no_data_found = 1
003620 material_not_of_type_fert = 2
003630 invalid_plant_entry = 3
003640 invalid_stloc_entry = 4
003650 invalid_plnt_matnr_combi = 5
003660 invalid_plnt_matnr_batch_combi = 6
003670 invalid_plnt_matnr_batch_stloc = 7
003680 OTHERS = 8.
003690 IF sy-subrc <> 0.
003700 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
> WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
003720 ENDIF.
003730
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 1 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 31
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+....4
VARI
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40 ####00000000000000
2222222222222222222200003333333333333322
0000000000000000000000000000000000000000
... + 80 ####################################
2222000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 120 ########################################
00000000
0000000
SY-MSGV1
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV2
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
Y-MSGV3
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
.. + 40
2222222222
0000000000
Y-MSGV4
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
.. + 40
2222222222
0000000000
_MCHB #######################################
0000000000000000000000000000900000009000
0000000000000000000000004000060000001000
.. + 40 ####0###0#######ÿÿÿÿ:###########è ####
1000300030000000FFFF300000000000EA280000
0000020001000000FFFFA000200043008D030000
.. + 80 x> ####################################
7328000000000000000000000000000000000000
8E03000000000000000000000000000000000000
.. + 120 ########################(#######
00000000
0000000
MCHBWA 000000000000895405CR01CRA10001 CR01TE
3333333333333333334533454333332222453354
0000000000008954053201321100010000320145
.. + 40 ST05####e#########
553300006000000000
3405000150C000000C
SCHARG_%_APP_% S_CHARG S_CHARG to
5544454255444542222222222222222222222276
3F3812703F38127000000000000000000000004F
.. + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
.. + 80 @1FQMultiple selection@
2224345547676766276666766642222222222222
000016C1D5C490C5035C5349FE00000000000000
.. + 120
222
000
X_MCHBF_WA
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40 00000000 00000000
3333333322222222222233333333222222222222
0000000000000000000000000000000000000000
... + 80 000000 #################################
3333332000000000000000000000000000000000
0000000000000C000000C000000C000000C00000
... + 120 ########################################
00000000
0C00000
I_MCHBF ################@#######################
0000000000000000400000000000100000000000
1000400040004000080050004000080000000000
... + 40 ################ÿÿÿÿÓ###################
1000000000000000FFFFD0000000000000000000
0000000000000000FFFF30007000630000000000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 120 ########################8#######
00000000
0000000
SYST ########################################
0000000000000000000000000000000000000000
0000000010000000000000000000000000000000
... + 40 ####################ã###################
10000000000000000000E0000000000000000000
F00000001000000010003000000000000000F000
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000001000800000000000000000000000
... + 120 #######################################
00000000
0000000
X_MKPFMSEG_WA-BKTXT
2222222222222222222222222
0000000000000000000000000
%_SPACE
0
0
X_OUTPUT_WA-BTEXT
22222222222222222222
00000000000000000000
X_MCHB_WA-MATNR 000000000000895405
333333333333333333
000000000000895405
X_MKPFMSEG_WA-WERKS
2222
0000
X_MCHB_WA-WERKSF CRA1
4543
3211
X_OUTPUT_WA-WERKS
2222
0000
X_MCHB_WA-LGORTF
2222
0000
X_MKPFMSEG_WA-LGORT
2222
0000
X_MCHB_WA-CHARG CR01TEST05
4533545533
3201453405
Active calls / events
No.... Type........ Name..........................
Programm
Include Line
1 EVENT START-OF-SELECTION
Y_MM_C_CICS_MAT_RECON
Y_MM_C_CICS_MAT_RECON 371
Internal notes
The termination occurred in the function "ab_jmess" of the SAP
Basis System, specifically in line 1083 of the module
"//bas/46D/src/krn/runt/abdynpro.c#22".
The internal operation just processed is "MESS".
The internal session was started at 20080305215621.
Active calls in SAP kernel
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=24072)
When : 3/5/2008 21:56:28.0
Threads : 2
Computer Name : FMSAP591
User Name : ai0adm
Number of Processors: 2
Processor Type: ia64 Family 31 Model 1 Stepping 5
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id 56f4
FramePtr ReturnAd Param#1 Function Name
00000000083a0c00 0000000076eab530 00000000000024f4 kernel32!GetDateFormatW
00000000083a0bd8 000000000215a7c0 00000000000024f4 kernel32!GetDateFormatW
00000000083a0b88 000000000067fe80 0000000000000080 disp+work!
000000001c1b0040 0000000076ea7420 0000000000212e50 MSVCRT!tanhf
000000001c1b0000 0000000000000000 000006fb7eb36e88 kernel32!GetDateFormatW
Maybe you are looking for
-
Display and return value in select list.
hi, i want to display the value in select list coming from this quary . select student_id from class_record where class_id =:p1_class_id and SECTION =:p1_section minus select student_id from STUDENT_TYPE_DETAILS where class_id =:p1_class_id and SECTI
-
How to get current task ID in BPM
Hi guys, I have a requirement where I need to get the current active UWL task id in BPM context. I have seen the following code to create a direct execution url for a BPM task. // begin session IUWLSession uwlSession; uwlSession = uwlSer
-
We have a volume license for Acrobat 9 professional, and I can see the key in my portal. We, however, do not have a disk for this license, nor is a download available in the downloads portal. Since we have purchased this software, it would be nice to
-
Scale simple rectangle with .css on hover
Good evening dear members, I uploaded you a sample project to illustrate the problem. (Dropbox - Example.zip) Over all I only want to resize a rectangle with a hover effect. However, the problem arises that the size of the rectangle with scale = 1 ch
-
How to creat pdf documents with printing restrictions in Aperture
Hi, I wondered if it is possible to create a pdf document made up of 9-12 image per page contact sheets, to send to clients that restricts the client to open and view only i.e no printing allowed. Photoshop allows this, however i would like to create