MDX Statement error in sap bpc 10.1 admin when opening a report

I have restored a previously created environment that was built on the sap bpc 10.1 platform and am receiving the following errors when accessing my reports and clicking refresh.  I also received an error when restoring the environment that says "Error occurred in expanding member formula".  I don't believe these would be related but I am unable to access the member formulas in the model.  I am however able to access all dimensions, etc.  I am not able to create any new reports though.  Any ideas on a solution.

Hi Kudzai,
The error you're getting in BPC 10.1 is because the environments were migrated from BPC 10.0 or older version using transaction UJBR and it was not migrated to 10.1 after the restore.
SAP Note 2052538 provides resolution for this. Please follow the instructions of Upgrade Guide for BPC NW 10.1:
Execute migration program UJT_MIGRATE_100_TO_101 to migrate 10.0 data to 10.1 if the restored environment was backed up from a BPC NW 10.0 system
Execute migration program UJT_MIGRATE_75_TO_101 to migrate 7.5 data to 10.1 if the restored environment was backed up from a BPC NW 7.5 system
Thanks
Rajesh

Similar Messages

  • Error in SAP BPC

    Hi Experts,
    We are facing a strange error while sending data from input Schedule in SAP BPC 7.5 SP08. For Reporting Currency USD, we are able to send data from the input schedule but from reporting currency EUR we are getting the error
    "Error running default logic()"..."Error converting records: The root element is missing.
    In some of the other schedules, we can send data for EUR and not USD.
    Am i missing something?
    Thanks in advance

    Hello Appu,
    Do you have something in default script logic? Revise it in the admin consol Default.LGF inside the application and scripts logic, and delete the code include. Always if you don't need to use it.
    By defect SAP BPC include some code there and you must delete it and save the changes.
    Regards,
    Gabriel Garcia

  • Data Manager Package Error in SAP BPC 10

    Hi All,
    I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
    Thanks & Regards,
    Ramesh.

    Hi Vadim,
    Please find the Advanced DM Script of Copy Package.
    PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
    PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
    PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%ACTNO%,%INCREASENO%)
    TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
    TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
    TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
    TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
    TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
    TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
    TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
    TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
    TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
    Thanks & Regards,
    Ramesh.

  • Installing error. SAP BPC 7.0

    Hi Experts,
    I am trying to install SAP BPC 7.0 on microsoft platform in this multiserver configuration:
    Server 1: Windows 2003 SP2 (US English) Application Server. WebServer. Only SQL Native Client installed.
    Server 2: Windows 2003 SP2 (Spanish) SQL Server, OLAP Server, Reporting Services Server. All SQL components installed in Spanish.
    Installing process is OK until Creating Appserver process when it keeps much time until an Error message appears. "Unable to create AppServer".
    any idea?
    Thanks in advance

    Hi,
    Collation specified into installation guide is required. If it is not right then some of databases or tables can not be created.
    Yes SSIS has to be installed into application server is one of prerequisite software.
    1433 port is not open then it is possible to have problems with comunication between application server and sql server.
    1433 port is used by sql client from application server to comunicate with server.
    Make sure you are using a port which is open between application server an sql server.
    Port 1433 can be changed into sql server for comunication (this is default one).
    So first make sure you have open the ports for SQL and SSAS open between application server and database server.
    After that make sure you have the right collation into sql.
    Kind Regards
    Sorin Radulescu

  • Error when opening Crystal Reports

    Hi
    I'm getting an error when opening Crysta R. from SAP 2007. Crystal version is 2008 and the error is something like this: The title of the wirndow is: Microsoft .NET Framework. Message: Exception not controlled in application. If you click continue the applicaction will avoid the error...etc.
    Any suggestions?

    Have you installed the 1.1, 2.0 and 3.5 Framework?
    Check your C:\Windows\Microsoft.NET\Framework and verify you have them all. If not go to Microsoft's site and install them.
    Thank you
    Don

  • Financial Reporting Studio has overflow error when opening any report

    Hello everyone!
    I faced with problem in FR Studio. When I try open any report is appears an error "Overflow". In others machines this error is not appears.
    Version of FR Studio: 11.1.2.757
    Many thanks for your advices!

    Uninstall CRVS2010 that you currently have installed.
    To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325  - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
    Reinstall CRVS2010 SP1 from here:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
    - Ludek

  • Glibc error when opening a report

    Hi,
    I got the error below when I opened a report. Do you have experience to solve this problem.
    Thank you
    Anh
    glibc detected *** /opt/sap/boe-sp3/bobje/enterprise120//linux_x86/WIReportServer.bin: double free or corruption (fasttop): 0x5d40b9b0 ***
    ======= Backtrace: =========
    /lib/libc.so.6[0x90e5a5]
    /lib/libc.so.6(cfree+0x59)[0x90e9e9]
    /usr/lib/libstdc+.so.5(_ZdlPv0x23)[0x56ec3fb3]
    /usr/lib/libstdc+.so.5(_ZdaPv0x1f)[0x56ec400f]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libcpi18n.so(_ZN13bo_utf8string13assign_helperEPKhj+0x84)[0x56786834]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libc3_cdbcl.so(_ZN15bo_intl_wstring18isMultilingualModeEv+0x143)[0x59ae4c63]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libc3_cdbcl.so(_ZN7c3_intl7ContextC1Ev+0x20)[0x59ae8014]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libc3_cdb.so(_ZN18cdbDocUserSettingsC1EP18cdbDatatypeBuilder+0xb9)[0x59645825]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libc3_cdb.so(_ZN15cdbUserDocumentC1EPKcP18cdbDatatypeBuilderP12c3_allocator+0xfc)[0x5964be90]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libc3_cdb.so(_ZN18cdbDocumentFactory11NewDocumentER7ibo_ptrI15ic3UserDocumentE+0x4d)[0x5980e50d]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libdg_SerializeManager.so(_ZN22dgSerializeManagerImpl12LoadMemStateERK13bo_utf8stringRS0_R7ibo_ptrI11idgDocumentERN19idgSerializeManager10ReturnCodeER10ucs2string+0xeba)[0x5cccf762]
    /opt/sap/boe-sp3/bobje/enterprise120//linux_x86/WIReportServer.bin[0x81b3dec]
    /opt/sap/boe-sp3/bobje/enterprise120//linux_x86/WIReportServer.bin[0x81d2ded]
    /opt/sap/boe-sp3/bobje/enterprise120//linux_x86/WIReportServer.bin[0x81006c3]
    /opt/sap/boe-sp3/bobje/enterprise120//linux_x86/WIReportServer.bin[0x84189ec]
    /opt/sap/boe-sp3/bobje/enterprise120//linux_x86/WIReportServer.bin[0x841e20e]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libebus.so.3.3.2.6(_ZN9CORBA_BOA12_OB_dispatchEP17OCI_TransportInfoRK8OBFixSeqIhEPKcR8OBBufferbmm+0x66)[0x56134c84]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libebus.so.3.3.2.6(_ZN18OBGIOPServerWorker15dispatchRequestER8OBBufferbb+0x256)[0x561620d0]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libebus.so.3.3.2.6(_ZN26OBGIOPServerWorkerThreaded10Dispatcher3runEv+0x46)[0x56165fa4]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libetc.so.1.0.12.5(_ZN10Etc10012049JTCThread20_JTC_startThreadHookEv+0x8f)[0x56494e11]
    /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libetc.so.1.0.12.5(_JTC_threadAdapter+0x39)[0x5649100d]
    /lib/libpthread.so.0[0xa21832]
    /lib/libc.so.6(clone+0x5e)[0x976e0e]
    ======= Memory map: ========
    00887000-008a1000 r-xp 00000000 fd:00 1928717                            /lib/ld-2.5.so
    008a1000-008a2000 r--p 00019000 fd:00 1928717                            /lib/ld-2.5.so
    008a2000-008a3000 rw-p 0001a000 fd:00 1928717                            /lib/ld-2.5.so
    008a5000-009e4000 r-xp 00000000 fd:00 1928718                            /lib/libc-2.5.so
    009e4000-009e5000 ---p 0013f000 fd:00 1928718                            /lib/libc-2.5.so
    009e5000-009e7000 r--p 0013f000 fd:00 1928718                            /lib/libc-2.5.so
    009e7000-009e8000 rw-p 00141000 fd:00 1928718                            /lib/libc-2.5.so
    009e8000-009eb000 rw-p 00000000 00:00 0
    009ed000-009ef000 r-xp 00000000 fd:00 1923951                            /lib/libdl-2.5.so
    009ef000-009f0000 r--p 00001000 fd:00 1923951                            /lib/libdl-2.5.so
    009f0000-009f1000 rw-p 00002000 fd:00 1923951                            /lib/libdl-2.5.so
    009f3000-00a18000 r-xp 00000000 fd:00 1923942                            /lib/libm-2.5.so
    00a18000-00a19000 r--p 00024000 fd:00 1923942                            /lib/libm-2.5.so
    00a19000-00a1a000 rw-p 00025000 fd:00 1923942                            /lib/libm-2.5.so
    00a1c000-00a30000 r-xp 00000000 fd:00 1928732                            /lib/libpthread-2.5.so
    00a30000-00a31000 r--p 00013000 fd:00 1928732                            /lib/libpthread-2.5.so
    00a31000-00a32000 rw-p 00014000 fd:00 1928732                            /lib/libpthread-2.5.so
    00a32000-00a34000 rw-p 00000000 00:00 0
    00a36000-00a3d000 r-xp 00000000 fd:00 1928737                            /lib/librt-2.5.so
    00a3d000-00a3e000 r--p 00006000 fd:00 1928737                            /lib/librt-2.5.so
    00a3e000-00a3f000 rw-p 00007000 fd:00 1928737                            /lib/librt-2.5.so
    00b22000-00b35000 r-xp 00000000 fd:00 1923899                            /lib/libnsl-2.5.so
    00b35000-00b36000 r--p 00012000 fd:00 1923899                            /lib/libnsl-2.5.so
    00b36000-00b37000 rw-p 00013000 fd:00 1923899                            /lib/libnsl-2.5.so
    00b37000-00b39000 rw-p 00000000 00:00 0
    00c3a000-00c45000 r-xp 00000000 fd:00 1923944                            /lib/libgcc_s-4.1.2-20080825.so.1
    00c45000-00c46000 rw-p 0000a000 fd:00 1923944                            /lib/libgcc_s-4.1.2-20080825.so.1
    08048000-0850c000 r-xp 00000000 fd:00 5380470                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/WIReportServer.bin
    0850c000-08525000 rw-p 004c3000 fd:00 5380470                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/WIReportServer.bin
    08525000-08528000 rw-p 00000000 00:00 0
    09c9c000-09f93000 rw-p 00000000 00:00 0                                  [heap]
    55555000-55556000 r-xp 00000000 00:00 0                                  [vdso]
    55556000-55557000 rw-p 00000000 00:00 0
    55557000-556a5000 r-xp 00000000 fd:00 5380422                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libmda_api.so
    556a5000-556ad000 rw-p 0014e000 fd:00 5380422                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libmda_api.so
    556ad000-55797000 r-xp 00000000 fd:00 5380424                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libmda_common.so
    55797000-557a0000 rw-p 000ea000 fd:00 5380424                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libmda_common.so
    557a0000-55b88000 r-xp 00000000 fd:00 5380395                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libOCAhelperw.so
    55b88000-55b9c000 rw-p 003e8000 fd:00 5380395                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libOCAhelperw.so
    55b9c000-55b9f000 rw-p 00000000 00:00 0
    55b9f000-55e6e000 r-xp 00000000 fd:00 5380452                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/librepo_proxy.so
    55e6e000-55e74000 rw-p 002ce000 fd:00 5380452                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/librepo_proxy.so
    55e74000-55e75000 rw-p 00000000 00:00 0
    55e75000-55f95000 r-xp 00000000 fd:00 5380396                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libOCAsecurityw.so
    55f95000-55f9a000 rw-p 00120000 fd:00 5380396                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libOCAsecurityw.so
    55f9a000-55f9b000 rw-p 00000000 00:00 0
    55f9b000-55fc0000 r-xp 00000000 fd:00 4798193                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libsatlw.so
    55fc0000-55fc1000 rw-p 00025000 fd:00 4798193                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libsatlw.so
    55fc1000-561fc000 r-xp 00000000 fd:00 5315143                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libebus.so.3.3.2.6
    561fc000-56211000 rw-p 0023a000 fd:00 5315143                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libebus.so.3.3.2.6
    56211000-56213000 rw-p 00000000 00:00 0
    56213000-56380000 r-xp 00000000 fd:00 4798122                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libcxlibw.so
    56380000-56397000 rw-p 0016d000 fd:00 4798122                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libcxlibw.so
    56397000-5639f000 rw-p 00000000 00:00 0
    5639f000-5641a000 r-xp 00000000 fd:00 5380471                            /opt/sap/boe-sp3/bobje/enterprise120/linux_x86/libdgServerLib.so

    Dear,
    Check: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=453076
    Regards,
    Syed Hussain.

  • Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

    Hi All,
    I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
    When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
    and when I try to see details the error summary like following:
    +File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
    this is urgent.
    Please reply me asap.
    thanks a lot in advance.
    Regards,
    Nik
    Regards, Naman

    Hi nikp11,
    According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
    This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
    Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
    Install and run Report Builder of SQL Server 2014.
    Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
    Reference:
    Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
    Thank you for your understanding.
    Best Regards,
    Wendy Fu

  • Crystal Report XI R2 error when opening a report

    This issue may not be unique to my situation and I'm hoping there are others here who have experienced this problem and have found a solution/workaround for it.
    I have a Cyrstal Report file that was created using CR version 10.0 that has been in use by our web application without any issues for a while now. However, I found out that after I upgraded the Crystal runtime on my web server to version 11.5, this particular report refused to work with a simple error message that said : "File cannot be found.".
    I tried opening this same report on Crystal Report XI R2, and it does not open and throws an error message saying: "This document could not be opened".
    Strangely enough, this same file opens up fine on Crystal version 10. I'm inclined to believe that the report file I'm trying to work with has some header information that Cyrstal XI does not like, because it opens and generates fine on version 10.
    The option of re-creating a new report from scratch on XI R2 is the last option since its a very complex report. Any help on this is greatly appreciated.
    Thanks

    Madusha,
    Those errors usually indicate that the report or something in the report has become corrupted. You could try
    a) Exporting the report to RPT format in CR 10 and see if it will open
    b) Try deleting 1 section at a time in CR10 until it opens in XI or R2, keep a copy of the original report and if you are able to narrow down the cause to a specific section or object then remove it from the original in CR10 and readd it in XI or R2

  • Error when Open Financial report in workspace

    Hi,all:
    I open the Financial report in workspace,it prompts an error windows.Waring message as follow:
    Thu Oct 15 11:10:57 2009]Local////Error(1051293) Login fails due to invalid login credentials.
    I confer this warning window,then it prompt another window which contains fields like the username,password ect.I input the same password as the password in the Database Connection Manager,then it runs well.and when i open another report it will not prompt the waring window,but if i log out the workspace ,and re-login,and open a financial report it will prompt the waring window and i have to input the password again.and the password is just the same as i have configued in the database connection management.
    I have configued the Database Connection Management which as follow:
    Open Workspace, choose Explore
    In the File/menu choose Tools/Database Connection Manager
    Make sure for the reports that this has the correct server, password, user ID.
    I think the operation above is corect.
    So,how to run the financial report smothly without input the password in the workspace?where need i to configue?
    Thanks

    Hi Everyone,
    Although I don't know the exact essbase environment of yours, I did resolve this problem by externalizing the users in Essbase on the server where the financial reports are pointing to.
    So in my case, I have two servers, one is called EssServer, where essbase is installed and used as the server for financial report to retrieve data. The other server is called ReportServer, where Financial Report is built and running. So all the financial reports work fine in the studio in ReportServer.
    But when I tried to view the report in Workspace in ReportServer, I got the login error as reported by user11314608. Then I went to the EssServer, externalize the users there and the problem is solved.
    Hope this can help. Good Luck!!
    Simon

  • Error when open Oracle Report Builder 10g (Windows 7 Ultimate 32-bit)

    Hi all,
    I installed Oracle Developer 10g on windows 7 ultimate 32bit.
    Form builder running well, but the report got problem when i opened.
    This is the error message:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: rwbuilder.exe
    Application Version: 10.1.2.0
    Application Timestamp: 42ea43b7
    Fault Module Name: ROS.dll
    Fault Module Version: 10.1.2.0
    Fault Module Timestamp: 42c3b2b7
    Exception Code: c0000005
    Exception Offset: 0000afaa
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Can anyone help?
    Regards,
    eRie

    Hello,
    For installing Developer suite 10gR2 on windows 7 there are some special installation steps.
    Please make sure that i hava followed them as described in the metalink note:
    Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) (Doc ID 1292919.1)
    Also be aware of the following issue:
    Cannot Open Forms/Reports Within Forms/Reports Builder 10gR2(10.1.2.3) on Windows 7 (Doc ID 1306651.1)
    Regards,
    Alex

  • Login error with report viewer when opening Crystal report with subreport

    Hi
    I have a problem with a login error (database vendor code 18456) when I try to open a crystal report to view it.
    The report uses data from an external payroll database but I'm running it via our Accounts system (it's a convenient front end for users to run the report from). This works fine for another report that doesn't have any subreports. However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error. It doesn't seem to be passing the login details for the payroll database down to the subreport.
    I'm using Crystal Reports version 11.0.0.1282. The Accounts system is Technology One. Tech One have provided a report template that has several formulas designed to allow Tech One to play nicely with Crystal. One of these formulas allows me to enter the nickname of the external database that the report needs to use. The external database's connection details are fully specified in the Tech One configuration section (server console). So in this case the report says use database U1 & the server console identifies U1 as being the payroll database, specifies the connection path  & has the username & password required to logon to the payroll database/server.
    The report is running ok & retrieving data, but for some reason the viewer is erroring. If anyone has any ideas for how I can get the login details used to run the main report to flow through to the subreport it would be much appreciated.
    Thanks
    Sue

    I understand your  frustration. We can do a few things. But really, it should be Technology One contacting us. To use an analogy (which you are free to share with Technology One). They built a car and sealed the hood. You bought the car, but he engine does not quite run as it should. You bring the car to the mechanic and all he can do is look at the car as he can not even open the hood.
    In any case, here is what I would do if I could open the hood (e.g.; if I was dealing with Technology One):
    1) Look up database vendor code 18456. This is simply the error our print engine is receiving from the database client and it simply passes it through relatively unhandled. This you should be able to do your self or ask Technology One to tell you what that means.
    2) Break out the subreport and see if it runs on it's own in the application (if this is a permissions issue - which I doubt -  it should come up here too). Unfortunately, this is for Technology One to do...
    3) Run the report (with the subreport) in the CR designer. Does it work there? If this is a win app and it works, we again eliminated permission issues. And we also confirmed that the report is good. Again, Technology One should do this for you.
    BTW.; CR 11.0 is out of support - not sure if you or Technology One are aware of this...
    4) Can the developer duplicate the issue on his development computer?
    Now, there are couple of instances where you say something like; "the report works and gets data, but the viewer errors out":
    +The report is running ok & retrieving data, but for some reason the viewer is erroring.
    However when I run the Crystal report that has subreports, the report generation process works but when the crystal reports viewer tries to open the report I get the login error.  +
    How do you know the report is retrieving data? From the error I would say the report never connects, thus the error / request for a logon...
    So, the short of all of this is; get Technology One to contact us. They can do it over the forums or obtain a phone case here;
    http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100
    Now, here is a warning. As CR 11.0 is out of support Technology One will have to upgrade to CR 11.5, before that can create a phone case, which for them and you brings up another bunch of issues...
    If you do not get any joy from the support person at you are talking to at Technology One, get him to escalate the issue. They are the ones that should be talking to us...
    Ludek

  • ARXAGMW.rdf throws BUILD_INVOICE_SELECT error when opening in Reports Builder 10.1.2.0.2

    Has anyone run across this error? "The source size of the program unit BUILD_INVOICE_SELECT is 91159 characters.  This exceeds the recommended maximum source size of 90000 characters on this platform."  I'm just opening the standard report in Reports Builder...no customizations thus far.  Wondering if this is related to the Report Builder version I'm on or not.

    Hi
    Thanks for the response. The document is good for issues with jsp reports. I am not even able to save this one as jsp till now. Not sure if there is some other way to do it.
    This is what I did:
    1. Create an excel template with 2 worksheets.
    2. Save as xml.
    3. Try to open with reports builder.
    Thats when I get the error.
    Not sure if my version problem or I am missing out on some step.
    Thx!

  • Error -214746726​2 "No such interface supported" when open an ActiveX automation reference to proprietar​y DLL, why?

    I got the error -2147467262 "No such interface supported" when open an ActiveX automation reference to a proprietary DLL. I check the forum which suggested solutions related to comcat.dll and IE6.0. I also tried to re-reqister the dll by regsvr32.exe, still does not work. However, I did nto get any luck. I was told that the DLL support iDispatch interface and should work ok with ActiveX in labview. Any suggestions? I appreciate it.

    Hello, Nandini,
    I am using the WinXP and I am calling the DLL provided by Pirouette for their chemometrics software. I just solved the error -2147467262, but the new error comes out is :
    Error code: -2147467259 Exception occured in IxAsObjs.CoSIMCAPredict.1, Language Server QueryInterface failed: No such interface supported.
    Here is a few word for the problem from priouette:
    " just a few more words that might help you understand the nature of the problem. your LabView client talks to AlgSuite.dll using IDispatch interfaces AlgSuite.dll communicates with the language server on an IUnknown interface.
    Your client knows nothing about the internal workings of AlgSuite.AlgSuite communicating with objects that do not have IDispatch interfaces should be irrelevant to your client."
    Since the VB demo works fine in my machine, so they though it is percular to labview. Any comments? I appreciate it.
    LvvL

  • Getting end of statement error in SAP CRM bp script

    Hi
    When I run the code below without the for loop everything runs perfectly ok. However when I add the for loop I get the error statement end of statement I think it has something to do with handling of the code inside the for loop but I have  no clue how to solve it
    Somebody any idea?
    I know the code is not working correctly I need to add variable to fill in the values however I need to first tackle the end of statement issue
    If Not IsObject(application) Then
       Set SapGuiAuto  = GetObject("SAPGUI")
       Set application = SapGuiAuto.GetScriptingEngine
    End If
    If Not IsObject(connection) Then
       Set connection = application.Children(0)
    End If
    If Not IsObject(session) Then
       Set session    = connection.Children(0)
    End If
    If IsObject(WScript) Then
       WScript.ConnectObject session,     "on"
       WScript.ConnectObject application, "on"
    End If
    Dim objExcel
    Dim objSheet, intRow, i, d
    Set objExcel = GetObject(, "Excel.Application")
    Set objSheet = objExcel.ActiveWorkbook.ActiveSheet
    session.findById("wnd[0]").resizeWorkingPane 132,30,false
    Dim total_row
    total_row = objSheet.UsedRange.Rows.Count
    For i = 1 To CInt(total_row)
         session.findById("wnd[0]/tbar[0]/okcd").text = "/nbp"
         session.findById("wnd[0]").sendVKey 0
         session.findById("wnd[0]/tbar[1]/btn[17]").press
         session.findById("wnd[1]/usr/ctxtBUS_JOEL_MAIN-OPEN_NUMBER").text = "19496"
         session.findById("wnd[1]/usr/ctxtBUS_JOEL_MAIN-OPEN_NUMBER").caretPosition = 5
         session.findById("wnd[1]/tbar[0]/btn[0]").press
         session.findById("wnd[1]/tbar[0]/btn[0]").press
         Dim strScreen
         strScreen = "wnd[0]/usr/subSCREEN_3000_RESIZING_AREA:SAPLBUS_LOCATOR:2000/subSCREEN_1010_RIGHT_AREA:SAPLBUPA_DIALOG_JOEL:1000/ssubSCREEN_1000_WORKAREA_AREA:SAPLBUPA_DIALOG_JOEL:1100/ssubSCREEN_1100_MAIN_AREA:SAPLBUPA_DIALOG_JOEL:1101/tabsGS_SCREEN_1100_TABSTRIP/tabpSCREEN_1100_TAB_04"
         session.findById("wnd[0]/usr/subSCREEN_3000_RESIZING_AREA:SAPLBUS_LOCATOR:2000/subSCREEN_1010_RIGHT_AREA:SAPLBUPA_DIALOG_JOEL:1000/ssubSCREEN_1000_WORKAREA_AREA:SAPLBUPA_DIALOG_JOEL:1100/ssubSCREEN_1100_MAIN_AREA:SAPLBUPA_DIALOG_JOEL:1101/tabsGS_SCREEN_1100_TABSTRIP/tabpSCREEN_1100_TAB_04").select
         session.findById("wnd[0]").sendVKey 6
         session.findById("wnd[0]/usr/subSCREEN_3000_RESIZING_AREA:SAPLBUS_LOCATOR:2000/subSCREEN_1010_RIGHT_AREA:SAPLBUPA_DIALOG_JOEL:1000/ssubSCREEN_1000_WORKAREA_AREA:SAPLBUPA_DIALOG_JOEL:1100/ssubSCREEN_1100_MAIN_AREA:SAPLBUPA_DIALOG_JOEL:1101/tabsGS_SCREEN_1100_TABSTRIP/tabpSCREEN_1100_TAB_04/ssubSCREEN_1100_TABSTRIP_AREA:SAPLBUSS:0028/ssubGENSUB:SAPLBUSS:7002/subA02P01:SAPLBUD0:1500/tblSAPLBUD0TCTRL_BUT0BK/ctxtGT_BUT0BK-BANKL[2,0]").text = "B000000003"
         session.findById("wnd[0]/usr/subSCREEN_3000_RESIZING_AREA:SAPLBUS_LOCATOR:2000/subSCREEN_1010_RIGHT_AREA:SAPLBUPA_DIALOG_JOEL:1000/ssubSCREEN_1000_WORKAREA_AREA:SAPLBUPA_DIALOG_JOEL:1100/ssubSCREEN_1100_MAIN_AREA:SAPLBUPA_DIALOG_JOEL:1101/tabsGS_SCREEN_1100_TABSTRIP/tabpSCREEN_1100_TAB_04/ssubSCREEN_1100_TABSTRIP_AREA:SAPLBUSS:0028/ssubGENSUB:SAPLBUSS:7002/subA02P01:SAPLBUD0:1500/tblSAPLBUD0TCTRL_BUT0BK/ctxtGT_BUT0BK-BANKL[2,0]").setFocus
         session.findById("wnd[0]/usr/subSCREEN_3000_RESIZING_AREA:SAPLBUS_LOCATOR:2000/subSCREEN_1010_RIGHT_AREA:SAPLBUPA_DIALOG_JOEL:1000/ssubSCREEN_1000_WORKAREA_AREA:SAPLBUPA_DIALOG_JOEL:1100/ssubSCREEN_1100_MAIN_AREA:SAPLBUPA_DIALOG_JOEL:1101/tabsGS_SCREEN_1100_TABSTRIP/tabpSCREEN_1100_TAB_04/ssubSCREEN_1100_TABSTRIP_AREA:SAPLBUSS:0028/ssubGENSUB:SAPLBUSS:7002/subA02P01:SAPLBUD0:1500/tblSAPLBUD0TCTRL_BUT0BK/ctxtGT_BUT0BK-BANKL[2,0]").caretPosition = 10
         session.findById("wnd[0]").sendVKey 0
         session.findById("wnd[0]/usr/subSCREEN_3000_RESIZING_AREA:SAPLBUS_LOCATOR:2000/subSCREEN_1010_RIGHT_AREA:SAPLBUPA_DIALOG_JOEL:1000/ssubSCREEN_1000_WORKAREA_AREA:SAPLBUPA_DIALOG_JOEL:1100/ssubSCREEN_1100_MAIN_AREA:SAPLBUPA_DIALOG_JOEL:1101/tabsGS_SCREEN_1100_TABSTRIP/tabpSCREEN_1100_TAB_04/ssubSCREEN_1100_TABSTRIP_AREA:SAPLBUSS:0028/ssubGENSUB:SAPLBUSS:7002/subA02P01:SAPLBUD0:1500/tblSAPLBUD0TCTRL_BUT0BK/btnPUSH_BUP_IBAN[5,0]").setFocus
         session.findById("wnd[0]/usr/subSCREEN_3000_RESIZING_AREA:SAPLBUS_LOCATOR:2000/subSCREEN_1010_RIGHT_AREA:SAPLBUPA_DIALOG_JOEL:1000/ssubSCREEN_1000_WORKAREA_AREA:SAPLBUPA_DIALOG_JOEL:1100/ssubSCREEN_1100_MAIN_AREA:SAPLBUPA_DIALOG_JOEL:1101/tabsGS_SCREEN_1100_TABSTRIP/tabpSCREEN_1100_TAB_04/ssubSCREEN_1100_TABSTRIP_AREA:SAPLBUSS:0028/ssubGENSUB:SAPLBUSS:7002/subA02P01:SAPLBUD0:1500/tblSAPLBUD0TCTRL_BUT0BK/btnPUSH_BUP_IBAN[5,0]").press     session.findById("wnd[1]/tbar[0]/btn[0]").press
         session.findById("wnd[0]/tbar[0]/btn[11]").press
    Next i
    Edited by: R. Brouwer on Dec 23, 2010 3:31 PM

    Hi,
    i think nothing can be followed by the command "Next" in VBS. Your example would be the right way in VB or VBA.
    Regards,
    ScriptMan

Maybe you are looking for

  • Windows 7 Home Premium Pre Installed OS Clarificat​ion

    REF SKU #3495331, Samsung Series 7 Laptop/Intel i7 Core Processor/ 15.6" Display/ 6 GB Memory/ 750 GB hard drive Within the full details of the product, "Overview" tab first bullet "Windows 7 Home Premium Installed" Further down on the same "Overview

  • How can I permanently delete apps from iCloud on my child's iPad

    Up front, I'd like to say that this question has nothing to do with storage space - rather, it's about deleting apps, for parenting reasons, the iCloud.  We wish to permanently remove select apps from our child's iPad.  We cant seem to do this - whil

  • Unexpected Signal : 8 occurred at PC=0xF7EF926B Function=(null) Library=/lib/ld-linux.so.2 install oracle 10g r2 in SUSE 10.1

    I'm install oracle 10g r2 on SUSE 10.1, but when call "runInstaller" appears an error: An unexpected exception has been detected in native code outside the VM. Unexpected Signal : 8 occurred at PC=0xF7EF926B Function=(null) Library=/lib/ld-linux.so.2

  • How to updating plugin.xml when it changed in 12C?

    After Importing the Plug-in Archive and Deploying it on Management Service with 12C, I need to make a change with plugin.xml in Plug-in Archive. Here it's the change, --- Old one: <PluginAttributes Type="MP" ReleaseStatus="Test"/> --- Change to: <Plu

  • Reading Entire file

    Hi, When I am trying to read the entire text file into string I am receiving NoClassDefFoundError: Here goes the code String str=""; String readString=""; StringBuffer temp=new StringBuffer(80); File fin=new File(args[0]); FileReader in=new FileReade