Me_process_po_cust badi for generating internal number range in me21n tcode
Hi all,
I have requirement while creating purchase order my client want to generate internal number range based on company code,document type and plant.here, we are making one custom table to hold compny code,plant,doc.type and Number range number.I am using me_process_po_cust badi for the same.I got the po header and item data from this badi.my problem is how i can pass this number range number in me21n to respective fields.
Regards,
Sleela Patil
Hi,
Thank u both of you..I tried that exit.following is the code I have written for that exit.
TABLES: T001K,NRIV,EKKO,ZVS_MM_RANGE.
DATA: WA_TAB TYPE ZVS_MM_RANGE,
WERKS LIKE T001W-WERKS.
GET PARAMETER ID 'WRK' FIELD WERKS.
SELECT SINGLE * FROM T001K
WHERE BUKRS EQ NEKKO-BUKRS.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM ZVS_MM_RANGE
INTO WA_TAB
WHERE BUKRS EQ NEKKO-BUKRS
AND WERKS EQ WERKS "T001K-BWKEY
AND BSART EQ NEKKO-BSART.
IF SY-SUBRC EQ 0.
MOVE: NEKKO-EBELN TO NUMBER,
WA_TAB-NRRANGENR TO RANGE.
ELSE.
MESSAGE 'Please maintain Number range in table zvs_mm_range' TYPE 'E'.
ENDIF.
ENDIF.
Here, I am getting data as I needed but problem is client having multiple plant for single company code.I am not able to capture plant in this exit.as, it is in item level.so,later on tried to do it using me_process_po_cust badi.
Now my problem is that how to pass this number range number in me23n tansaction.
Regards,
Sheela Patil
Similar Messages
-
Defining Internal Number Ranges
Hi,
I am looking for a good solution for <u><b>internal number ranges generation</b></u> in MDM, I haven't find any solution for this number ranges in any of SAP MDM ref. guides and any other SAP standard documentation.
Business requirement:
1)Based on Account Group we have different internal number ranges for Business Partner.
2)Once the user select a Acct. Grp for Business Partner in MDM corresponding <u>sequential number range</u> should generate and assign to that BP.
3) the solution should work in both Data manager and in Portal.
Appreciate all valid suggestions and helpful answers.
Thanks,
Pooja VarmaHi Anita,
I am not looking for Remote System key generation.
I need a solution for the internal number range generation for any new BP or Material creation within MDM and there is no data model provided by standard SAP MDM on this.
- I am wondering how all other clients are implementing this kind of requirement?
- this is very crucial and important for any client in the BP.
Hi All,
Kindly share some of your experiences and provide solution in this regard.
Highly appreciated all helpful answers and suggestions.
-<u><i>Full Points will be given all valid answers</i></u>.
Regards, Pooja -
Diiferenet Internal Number Ranges by Depot(Plant) wise
Hi Experts,
I have a requirement in SD for Different Internal Number ranges by Depot(plant wise.
For example, my client having 8 depots(Plants). For each Depot client need different number range, means for depot 1 client need one range that is 9000 to 10000. For depot 2 client need number range like 10001 to 20000 like this for 8 depots but document type(sales order, billing, delivery, invoice) is same for 8 depots. How can i achieve this?
As I am fresher I am not getting any clue. If any one did this please provide me the details how to achieve this.
Thanks & Regards,
Muralikrishna
Moderator Message: Do some R&D of your own first.
Edited by: kishan P on Nov 15, 2010 2:24 PMHi Gnana Kumar,
I seen this link, here mentioned that develop the z table with fields like VKORG, FKART, NUMKI. Can I add Depot(plant) filed also?
and here client is having only one Sales Organization.
Thanks & Regards,
Muralikrishna -
Hi All,
Please help to find out why system does not assign continuous running number for new sold-to-party account group.Why Internal number range of sold-to-party assigned by system not in running sequence.
Thanks & Regards,
PallaviHi pallavi
Go to OVT0 and select the sold to party account grp and and in that details you can see the number range field ,there you can check what number range has been assigned to the account group. Another way is go to OBD2 and check the sold to party account grp which number range has been assigned
Regards
Srinath -
Wrong internal order number for internal number range
Hi,
I have created an internal order type and assigned the internal number range 450000-459999. When we checked the numbers given for the system there are missing numbers. For example; the numbering is OK up to 450013 numbered order and the next order has 450020 number, and next one has the 450040
number.
I checked the COAS table and there are no number used by any other order. What can be the reason for this situation? How can we fix the problem? Is there any one who face the same problem?
What are your suggesitions...
Thanks in advance
AhmetHi,
I have similar kind of query. How to use the numbers that the system jumped? Is there any record/history of unused numbers present in any table? Thanks in Advance!
Regards,
Nidhi -
Dear Gurus,
I have an issue with LSMW.
Initially for our client, we used to generate material codes with Exernal number ranges.
Now, the client needs internal number ranges for the material (ROH) created.
I removed the Filed MATNR (material number) from the list in "Maintain Source fields".
And in "Maintain Field Mapping and Conversion Rules", i made MATNR as initial. After running the LSMW, i am getting the material code as !000000.
please advice.
Thanks in advance.
SGS1.Maintain internal number range to material type ROH - MMNR
2.USe LSMW direct input method (not recording method)
Refer this link for moreinfo http://wiki.sdn.sap.com/wiki/display/ABAP/LSMW
In the Bottom you could see useful link go to that website saptechnicaldotcom and learn all the methods available for materil master load -
Internal Number range:Issue
Hi,
I am using the internal number range for the employee number creation.
Scenario:
Suppose I have created 13 employee in the organization so far.By mistake I created the wrong employee record(Employee number 00000013).
Now when I delete any existing employee (say "John" with the employee number as 00000013) using the Tcode PU00, I face the following issue:
I am able to delete the record (all the associated infotypes) successfully.
Now when I try to re-create the employee using tcode PA40, it always creates the employee wtih the next number (00000014) and not with 00000013.
I want the new correct employee to have the employee number as 00000013.
Can you please advise?
Regards
ManishGo to Tcode PA04
Click the Status Delete 0000014 Current Number make it as 000013 and hire -
Account group with Internal Number Range
Hello Gurus,
With Internal number range assignment to the Customer Account Group, I am unable to extend the customer from one sales area to another sales area with the same Customer number.
If I am not it is a standard feature that irrespective of the number range (internal or external), with the same customer number, customer can be extended to multiple sales area.
Please correct me if I am wrong and suggest a solution.
Thanks in AdvanceHello friends,
No error message but the next number is getting allocated.
in VD01 or XD01
the following steps r followed.
1. Enter the Account Group
2. Sales Area (New Sales Area for the customer)
3. Reference Customer.
4. Reference Sales Area.
Rather than going to the sales area directly, General area screens are appearing.
Upon saving saving the details New customer number is getting allocated.
I have no clue where I have gone wrong...
looking forward for suggestions.
Regards -
Hi All,
I have defined the internal number ranges and assigned to vendor account group but when i create a vendor master record the system allocating number randomly instead of serielly
why this is happened ?
Regards,
RajeshHi,
You may have Number range Buffer for Vendor No Range.
goto T.code SNRO and check for Vendor number range.
Hope this helps, please assign points.
Thanks,
Rau -
Assingment of Internal Number Range to different type of Maintenance Order
Hi..
We are implementing SAP Plant Maintenance. We have created 10 order type. We want to assign 10 number ranges to the order types. During "Configuring of Number Range" t.code OION , when I am inserting new groups for all 10 type of order, it is not accepting by the group name. Number range which i am giving to the desired group is saved in other groups.
Can anybody help to adopt the right process sothat I can assign the correct internal number range to different order types.
Thanks in advance.
Regards
TPHi Pramod,
Please follow the procedure mentioned below:
Configure number ranges.
1. In the menu bar go to Group & Insert
2. Enter the Text & the interval i.e number range.
3. Now add the new group using the symbol ( + )
4. once this is done the new group will be reflected.
5. Then select the element ( order type) i.e to be assigned using F2 key.
6. Enable the check box against the new group ( respective group)
7. Now in the menu bar press Element/Group tab ( or Use F5 key)
8. The selected element(order type) will be assigned to the particular group that you have
selected.
Hope this will help you resolve the problem.
Thnaks & Regards
Arun Vijay D -
Internal number range( alphanumberic) will be incremented automatically
Dear All,
Will the internal number range (Alphanumberic) of the material master get incremented automatically.
say,
the internal number range we set is AW0000001 to AW9999999. The number range should be incremented
Kindly reply for the querry
Thanks
BakyarajYou can try with material Template.
SPRO --> Logisitics - General -- > Material Master --> Basic Settings -- > Define Out put format for Material Numbers.
Transaction Code : OMSL
Activities
1. Define the length of your material numbers.
2. If required, define a material number template.
3. Specify the form in which you wish to store your material numbers.
For information on how to use the Lexicographical indicator, be sure to read the corresponding documentation.
4. Specify whether your material numbers are to contain leading zeros.
Note
If the Lexicographical indicator is set, the system ignores the setting of the Leading zeros indicator.
Indicator for lexicographical material numbers
Definition
Defines the way numeric material numbers are stored in the database.
Use
Caution
It is only possible to set or reset (cancel) this indicator if no numeric material numbers have been used yet in the system since they would no longer be interpretable after setting or resetting this indicator.
If this indicator is not set, numeric material numbers are padded with leading zeros and stored right-justified (example 1). Material numbers containing at least one nonnumeric character are stored left-justified (example 2).
Example 1
Defined length: 8 characters
Internally/externally assigned number: 123
Stored number: 000000000000000123
Example 2
Defined length: 8 characters
Externally assigned number: 1A3
Stored number: 1A3
If this indicator is set, material numbers are stored as follows:
If the material number (numeric or not purely numeric) was assigned externally, it is stored left-justified as entered.
Example
Defined length: 8 characters
Externally assigned number: 123
Stored number: 123
Note
Any leading zeros that may have been entered are stored too. This makes it possible to distinguish between the material numbers 123 and 0123.
If the material number (numeric only) was assigned internally, it is padded with leading zeros to the defined length and stored left-justified.
Example
Defined length: 8 characters
Internally assigned number: 123
Stored number: 00000123 -
hi,
some body tell me the transaction code for copy of the Internal Number Range for EWT from one year to another year
regards
sapfanHi,
use t.code:J1INUMBER for internal challan number creation, u can't copy from one year to another year.
regards
sai krishna -
Copy of Internal Number Range of extended withholding tax
hi,
Can any one tell me the transaction code for copy of the Internal Number Range for extended withholding tax from one year to another year
points will be assigned
thanks in advancehi,
use t.code:J1INUMBER
all the best
Prasad -
How to change internal number range into external number range
Hi All,
There is a number range in the system which was assigned internally by mistake earlier. Now, I want to change the internally assigned number range to external number range.
Can anyone please let me know, the procedure to change used number range from internal number range to external number range and from external number range to internal number range.
Quick reply will be appreciated & points will be assigned.
Thanks & Regards,hi Mehak,
you can try to simply change the range from ext to int (and vica versa). If that does not wrok, than you can delete the range and recreate it with proper settings. But you have to take into account that if you have a range as external from 1 to 10 and for example numbers 2 and 5 are taken already than you recreate the range 1..10 as internal, than you could have some problems. Probably best is in this case to recreate with other interval.
hope this helps
ec -
Converting a standard BSP field into an internal number range
Hi Friends,
I'm new to CRM BSP and have a requirement wherein i have to edit standard BSP field and convert it to an internal number range field.Can anyone plz help me out on this.
Thanks in advance.
Regards,
Parvathy.Hi,
This cant be done in configuration
There are some enhancements for this control
You please check those enhancements
MGA00002 and MGA00003
regards,
santosh
Maybe you are looking for
-
Error 404 downloading Itunes Podcast
I am unable to download a radio Podcast. I can subscribe but always receive an 'Error 404 Could not be found on the server' message when i try to download the episodes? Whazz up? Any ideas? *Side note* I was already subscribed to the podcast and it w
-
Single server solution for RDS / TS / RDP using Windows Server 2012 R2
Planning on setting up a small single server and need this functionality: * 3 local users runnnig Windows 7 Home Premium needs to access files on the server * The same 3 users should also be able to connect from home (PC, Mac, iPhone) and run an app
-
Using as Media Center.....what keyboard?
Just curious on what keyboards/mouse everyone bought to use their Mini in their living area on the TV? Someone said to get a bluetooth set but I looked at and office store and the cheapest and only one was $200! What's wrong with just getting the wir
-
No puedo previsualizar mis archivos CR2 en Mac
Hola a todos. Cuando paso las fotos de mi cámara (Canon 6D) a mi ordenador (Macbook pro) no puedo ver las miniaturas, o sea, las vistas previas de los archivos CR2. Sólo me figura el archivo como ícono (la hoja con el diafragma y las letras CR2), y n
-
How can i delete an app on my desktop that says it won't delete because it's still open, even though i have done force quit numerous times? I even deleted it's files in my Finder and it just won't go away. Help please!! TIA