ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Similar Messages

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Report similar to MC$4 that does not show absolute values

Hi all,
We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
Thanks in advance!
George

HI
Your input criteria should contain all plant numbers and the period to be analyzed. Execute the report and then select: Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month. Follow the options to export to Excel. Report will be based on Plant, Storage location and Month.
Regards

LOV does not return the value (2)

PPR in general does not work correctly if invalid HTML is generated. One example of an invalid HTML is having an opening <TD> tag immediately following another opening <TD> tag.
After checking everything else, if LOV still does not return the value, test whether it's not a problem with the invalid HTML by placing the messageLovInput outside of the complicated layout nestings you may have. If it works outside of the layout nestings, look for the possible problems in the layout nestings.

Hi RamKumar,
Thanks for your reply.. I have already done that but no luck :(
Regards,
Hemanth J

BBP_MON_SC : does not show the details of the Shopping cart

Hi,
We are in SRM4.0 and Stack 11.
when we use the transaction:BBP_MON_SC to check the Shopping cart and get into the details, the system does not show the "details of the shopping cart".
The sequence of the steps :
1) click on the "monitor shopping cart"(BBP_MON_SC) in our web browser
and search the SC by date.
2) The list of the SC created on the specific date come up.
3) when we select a SC to get into the details the system shows
a "BLANK SCREEN".
Thanks in advance.
Regards,
RK.

Hi,
First check whether you have implementedany custom BADI at the SC item level.If the BADi is wrongly implemented then you may not be able to see the item details.
Also Make sure that BASIS Team has assigned correct roles and profiles to the administrator user. Ask BASIS to use SAP provided roles and then you can try out again. (Try this role - SAP_EC_BBP_ADMINISTRATOR / SAP_BBP_STAL_ADMINISTRATOR )
Here are the related links ->
http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/9f/a47c3c989d501fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/46d19e4069d14e92decb87d6a56b9c/frameset.htm
Incase it does not help, then, Without assigning any other roles, try logging to the transaction - BBP_MON_SC via SAP GUI instead of webpage and then do once you get some authorization issue /error, using SU53 Transaction, you can get the required Authorization objects need to attached to the user profile.
Alternatively, For time being, Try assigning SAP_ALL and SAP_NEW to the Administrator Buyer user role of that user.
Also have a look at these notes:
Note 636270 Shopping cart monitor: Display of SC if user is deleted
Note 764135 Shopping cart monitor: Selection according to 'Created by'
Note 865179 BBP_MON_SC: Search for shopping carts shows wrong results
Note 683524 Shopping cart monitor does not display all shopping carts
Note 1045386 BBP_MON_SC: No DELETED Event after deletion
Note 829529 BBP_MON_SC: Displaying shopping cart of a locked user
901427 BBP_MON_SC: Requester instead of creator in overview list
859012 BBP_MON_SC: Deleted shopping carts are not found
882884 BBP_MON_SC: Deleting items in the status I1116
792542 Shopping cart monitor: incor. return URL from shopping cart
672764 Shopping cart monitor: Display of deleted shopping carts
Note 522620 Shopping cart monitor: Customer enhancement / BADI
Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
949399 SC monitor: Search help does not display all catalogs
972697 bbp_mon_sc: No result for limit shopping cart search
901608 BBP_MON_SC: Service Item search is incorrect
813434 Shopping cart monitor and internal ITS:Shopping cart display
669720 BBP_MON_SC: Follow-on document is not found
625694 Not possible to search for SHB based on some docs in monitor
596089 SHP Monitor: problems with search functionalities
Note 561186 Monitor shopping cart: Selection of large datasets
BR,
Disha.
Pls reward points for useful answers.

PI sheet does not show the table of materials to be consumed.

Hello,
Weu2019re trying to customize the pi-sheet on SAP 4.7 (SAP-APPL Release 470) and weu2019re having some problems.
On transaction O12C (Define Process Instruction Categories), weu2019ve created an Instruction Category for Material Consumption using Type of the process data request equal to Repeated process data request. Doing this, when we create a Process Order, the PI sheet does not show the table of materials to be consumed.
If we use Type of the process data request equal to Simple process data request instead of Repeated process data request, the PI Sheet works well (The table of materials to be consumed are showing).
Thanks in advance.

Hi,
Is the issue resolved...? If yes then how...
If not, then can you please elaborate more on the process instructions charateristics you have used. Just list first ten characteristic and there values.
Regards
Neeraj

Imqobjmgr does not recognize the value of java.naming.provider.url property

On Windows, I am running imqobjmgr 4.3
when I run imqobjmgr -i list.properties, I am getting the following error
Error [A3052]: imqobjmgr does not recognize the value of java.naming.provider.url property.
Why is that?
classpath
C:\Sun\SDK\imq\lib\jms.jar;C:\Sun\SDK\imq\lib\imq.jar;C:\Sun\SDK\imq\lib\fsconte
xt.jar;.
contents of list.properties
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
# Copyright 2000-2008 Sun Microsystems, Inc. All rights reserved.
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License ("CDDL") (collectively, the "License"). You may
# not use this file except in compliance with the License. You can obtain
# a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
# or mq/legal/LICENSE.txt. See the License for the specific language
# governing permissions and limitations under the License.
# When distributing the software, include this License Header Notice in each
# file and include the License file at mq/legal/LICENSE.txt. Sun designates
# this particular file as subject to the "Classpath" exception as provided by
# Sun in the GPL Version 2 section of the License file that accompanied this
# code. If applicable, add the following below the License Header, with the
# fields enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyrighted [year] [name of copyright owner]"
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright holder.
# @(#)list.properties 1.11 07/02/07
# This property file will list administered objects
# Version of command file
# NOTE: This is not the version of the Sun Java(tm) System Message Queue product
version=2.0
cmdtype=list
# If you want to only list a particular type of administered
# object, uncomment the following line and specify the type.
# Acceptable values for the type property are: t, q, tf, and qf,
# where t = topic, q = queue, tf = topic connection factory, and
# qf = queue connection factory.
#obj.type=
# To use the LDAP service provider implementation from
# Sun Microsystems, uncomment the following two property lines
# and set the url property correctly.
objstore.attrs.java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory
objstore.attrs.java.naming.provider.url=ldap://localhost:389/ou=imqobjmgr,o=sun.com
# To use the File System service provider implementation from
# Sun Microsystems on Solaris, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///home/foo/imq_admin_objects
# To use the File System service provider implementation from
# Sun Microsystems on Windows, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///C:/imq_admin_objects
#objstore.attrs.java.naming.security.authentication=
#objstore.attrs.java.naming.security.principal=
#objstore.attrs.java.naming.security.credentials=

I see you're using Sun Java System Message Queue. There's a forum specific to that product over at [http://forums.sun.com/forum.jspa?forumID=711&start=0|http://forums.sun.com/forum.jspa?forumID=711&start=0] . You could try asking there.
Nigel

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

In a purchase order for 3 GR's Quantity does not equal the value

Hi,
I have found the difference in one purchase order, there have been 3 GRs where the Qty does not equal the Value. How has this happened?
Any guesses why the difference has come.
Thanks&regards,
Veena

Hi Vishal,
In po history for agt 3 Gr's Quantity does not equal the values. I hope the difference is Movement types. But exactly where to check this movements i am not getting.
Can you tell me this which T.code.
Tx,

ME23n , Does not shows the values correctly in print preview

Similar Messages

Maybe you are looking for