Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Similar Messages

  • Functional Location measuring point UOM not displayed on mobile device

    Dear Experts,
    I am running SAP Work Manager 6.0 with Agentry Server v6.1.4.179 and SAP ECC 6.0 with SMFND 610_700 SP01 and SMERP 610_700 SP01 and Agentry Client v6.1.3.10200 on an iPhone.
    When I display from the iPhone the "Valve Water Flow in m3/h" counter, the UOM is represented as "***"
    The "Pump Bearing Oil Level in mm" counter UOM is displayed properly.
    The Measuring Points are associated to a FLOC.  A work Order with this FLOC has been transmitted  to mobile device.
    Thanks for your help.
    Didier.
    Reading Points definition in SAP:
    Reading Points on iPhone:
    Tags edited by: Michael Appleby

    Hi Bill,
    Thanks for your reply. In fact , I have the same problem with the WPF client and if I enter a reading value, I will get the following error message during the transmit. "Unit *** is not created in language EN"
    WPF client display:
    Transmit error:
    Agentry log:
    readDataObjectMeasuringPoint::begin
    BAPI::begin
    User::getString::begin
    User::getString::Property: transaction.point = 26
    User::getString::begin
    User::getString::Property: transaction.shortText =
    User::getString::begin
    User::getString::Property: transaction.reading = 0
    User::getString::begin
    User::getString::Property: transaction.UOM = ***
    User::getString::begin
    User::getString::Property: transaction.referenceObjectNumber = OR000004000293
    User::getString::begin
    User::getString::Property: transaction.prevCodeGroup =
    User::getString::begin
    User::getString::Property: transaction.prevCatalogType =
    User::getString::begin
    User::getString::Property: transaction.ValuationCode =
    User::getString::begin
    User::getString::Property: transaction.isCounter = False
    User::getString::begin
    User::getString::Property: transaction.codeTextOnly not found, returning empty s
    tring
    User::getString::Property: transaction.codeTextOnly =
    User::getString::begin
    User::getString::Property: transaction.description = Pump Bearing Temperature
    User::getString::begin
    User::getString::Property: transaction.skipReading = False
    User::getString::begin
    User::getString::Property: transaction.status not found, returning empty string
    User::getString::Property: transaction.status =
    User::getString::begin
    User::getString::Property: transaction.IsNotRead = False
    User::getString::begin
    User::getString::Property: transaction.tmpReading not found, returning empty str
    ing
    User::getString::Property: transaction.tmpReading =
    User::getString::begin
    User::getString::Property: transaction.CodeGroup not found, returning empty stri
    ng
    User::getString::Property: transaction.CodeGroup =
    User::getString::begin
    User::getString::Property: transaction.code not found, returning empty string
    User::getString::Property: transaction.code =
    readDataObjectMeasuringPoint::SkipReading=False
    User::getString::begin
    User::getString::Property: transaction.point = 26
    User::getString::begin
    User::getString::Property: transaction.shortText =
    User::getString::begin
    User::getString::Property: transaction.reading = 0
    User::getString::begin
    User::getString::Property: transaction.UOM = ***
    User::getString::begin
    User::getString::Property: transaction.referenceObjectNumber = OR000004000293
    User::getString::begin
    User::getString::Property: transaction.prevCodeGroup =
    User::getString::begin
    User::getString::Property: transaction.prevCatalogType =
    User::getString::begin
    User::getString::Property: transaction.ValuationCode =
    User::getString::begin
    User::getString::Property: transaction.isCounter = False
    User::getString::begin
    User::getString::Property: transaction.codeTextOnly not found, returning empty s
    tring
    User::getString::Property: transaction.codeTextOnly =
    User::getString::begin
    User::getString::Property: transaction.description = Pump Bearing Temperature
    User::getString::begin
    User::getString::Property: transaction.skipReading = False
    User::getString::begin
    User::getString::Property: transaction.status not found, returning empty string
    User::getString::Property: transaction.status =
    User::getString::begin
    User::getString::Property: transaction.IsNotRead = False
    User::getString::begin
    User::getString::Property: transaction.tmpReading not found, returning empty str
    ing
    User::getString::Property: transaction.tmpReading =
    User::getString::begin
    User::getString::Property: transaction.CodeGroup not found, returning empty stri
    ng
    User::getString::Property: transaction.CodeGroup =
    User::getString::begin
    User::getString::Property: transaction.code not found, returning empty string
    User::getString::Property: transaction.code =
    create::/SMERP/PM_DOMEASUREMENTDOC_CRT Connection ID: com.sap.mw.jco.JCO$Client@
    42499d6d
    create::Function /SMERP/PM_DOMEASUREMENTDOC_CRT created
    setImportParameters::TIMESTAMP_FROM_MOBILE=20140701214858
    setImportParameters::COMMIT_WAIT=X
    setImportParameters::MOBILE_USER=MJONES
    setImportParameters::USER_GUID=005056913EE61EE3B5A27E3E2BC46F0D
    setImportParameters::MIDDLEWARE_CALL=X
    setParameters::begin
    setParameters::POINT=26
    setParameters::IDATE=20140701
    setParameters::ITIME=172024
    setParameters::MDTXT=
    setParameters::READR=MJONES
    setParameters::RECDV=0
    setParameters::RECDU=***
    setParameters::RECDVI=X
    setParameters::CODGR=
    setParameters::VLCOD=
    setParameters::CODCT=
    setParameters::IV_WORK_ORDER_OBJECTNR=OR000004000293
    execute::::MJONES::before BAPI execute: /SMERP/PM_DOMEASUREMENTDOC_CRT
    User::rethrowException::begin
    User::rethrowException::Exception caught: Unit *** is not created in language EN

  • Search for member activities - points are not displayed correctly

    Hi experts,
    I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
    Can anyone tell me why the points in the result list are not displayed correctly?
    Thanks and best regards
    Anne

    Sometimes threads are deleted if they violate the Rules of Engagement.  If that happens, you'll lose points that were allocated to you.  Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this.  I'd guess, it's more likely you'd responded to a post that broke the rules.
    Really important
    1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable). 
    2. Don't ignore rejection emails or other communications from moderators.  They are followed up, and, if warnings are ignored, then accounts will be deleted.  Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
    matt

  • My points are not displayed correctly

    Hi,
    My SDN points are actually 282. But now it's displaying 0. Is it some technical problem or is there some reason behind deleting my points. I request the moderators to look at this once.
    Thanks,
    Sri.
    Problem Solved
    Edited by: Sri on Dec 7, 2009 11:51 AM

    Sometimes threads are deleted if they violate the Rules of Engagement.  If that happens, you'll lose points that were allocated to you.  Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this.  I'd guess, it's more likely you'd responded to a post that broke the rules.
    Really important
    1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable). 
    2. Don't ignore rejection emails or other communications from moderators.  They are followed up, and, if warnings are ignored, then accounts will be deleted.  Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
    matt

  • Movie artwork not displaying on mobile devices

    Anyone have any idea why the artwork on some movies do not display on my iPhone's or iPad? Shows in iTunes ... not sure what the issue is. Artwork are jpeg files. Need some help, suggestions ...
    Thanks,
    Sal

    May be obvious, but have you checked the box in iPod options in iTunes that says "Display Album Artwork"?
    I am having a similar problem, but about half of my artwork will show up on my iPod (it seems to be random which artwork will transfer). When it is plugged into iTunes, all of the artwork is there. I have tried deleting and re-adding artwork to songs with no luck. My iPod is set to "Manual Update", and the check box for album art is checked in iTunes. Also, I used to have my iPod on automatic update, but since I have switched to manual at least some of the artwork added since then is viewable on the iPod, so I don't think it is the setting that is the problem. Any suggestions?
    iPod 5G   Windows XP Pro  

  • My embedded Jotforms are not displaying on iOS devices

    Just checking to see if anyone else has run into this issue. My embedded Jotforms display fine on desktop and Android devices, not any iOS devises.
    Perhaps I missed a step somewhere?
    Rentaleez - New Listing Form

    I tried to check users forum and can see that multiple users have complained about this issue , have you tried to contact them ? If not then I would suggest you to contact them directly.
    Thanks,
    Sanjit

  • HT1923 iTunes on my Windows Vista has failed to update over several weeks. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting

    iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??

    Hey petanque1,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • Measurement points list not downloaded in MAM 2.5

    Hi,
    We have recently upgraded our MI server from SP13 to SP14, in which we use MAM 2.5 SR2. After that, we re-generated all SyncBOs and started replication for the timed-2 way ones. We also re-installed the PDA applications
    All seemed to work fine, but now the measurement list points are not being downloaded to the PDAs anymore.
    If we run the function MAM25_041_GETLIST on the backend, the measurement points are returned correctly. Also, when we run transaction MEREP_EX_REPLIC for the SyncBO MAM25_041, it runs with no error and returns many records (more than 50000) with action ADD and around 150 with action MODIFY.
    Does anybody know what the problem might be?
    Thanks,
    Daniel

    Hi Joy,
    you can refer the Table 2 .
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix.pdf
    Yes, Device pack needs to be installed in all servers which also requires reboot of servers.
    Further, u need to take snapshot of existing firmwares from Device---Device Settings --device defaults to avoid changing of firmwares for other models.
    regds,
    aman

  • SetTimeout() not working on mobile devices

    setTimeout() does not work on mobile devices ie. Safari on iOS 7.1.2 and Android 2.2.  What is the alternative that works on mobile devices?  Thank you.

    Hi Carlos,
    MS mobile browsers are crippled. They don't support many features known from IE. I would suggest to check MSDN for Windows Mobile documentation:
    http://msdn2.microsoft.com/en-us/library/bb158486.aspx
    You might also check the blog of IEmobile Team:
    http://blogs.msdn.com/iemobile/default.aspx
    Best regards,
    Klaus

  • Web Pages not loading on Mobile Devices

    Browsing web pages not working on mobile devices
    I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
    I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
    previously i had adsl from bt and didnt have these issues.
    Solved!
    Go to Solution.

    Try turning Smart Setup off.
    http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
    Devices where there are known to be problems include:
    Some Apple devices including iPhone 5 and Apple TV
    some Android smartphones
    Xbox<
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Buttons are not displayed for the first time when drawImage method is used

    Hi
    In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
    Please help me!
    Thank You

    Hi
    This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
    import java.awt.*;
    import javax.swing.*;
    /*<applet code = MyClass width = 500 height = 500>
    </applet>
    public class MyClass extends JApplet
    Image img;
    JButton b1,b2;
    Container cp;
    Canvas1 cv;
    class Canvas1 extends JPanel
    public void paint(Graphics g)
    super.paint(g);
    g.setColor(Color.black);
    g.fillRect(0,0,500,500);
    img = getImage(getCodeBase(),"image1.jpeg");
    g.drawImage(img,20,20,this);
    public void start()
    cv = new Canvas1();
    cv.setBounds(0,0,500,500);
    cp.add(cv);
    public void init()
    setLayout(null);
    cp = getContentPane();
    b1 = new JButton("Button1");
    b1.setBounds(1,1,100,30);
    cp.add(b1);
    b2 = new JButton("Button2");
    b2.setBounds(200,1,100,30);
    cp.add(b2);
    It would be very helpful to me if you could fix the problem.
    Thank You.

  • Measure Values are not shown in the pivot tables

    Measures without aggregation (in rpd) are not shown in pivot table.
    Im trying to add multiple columns in the fact table as measures,one which is summable had has the SUM function and three which are not summable.
    The initial report will be as follows and I have been able to get the data displayed.
    Year | Month| Company Name| SUM(C1)| C2|C3
    However if I pivot the table as follows data in column C2 and C3 are not Displayed.
    Columns
         Year     
              Month     
              Company     
    Rows                    
    Measure Lablel                    
    Measures
         SUM(C1)     
                   C2     
                   C3                    
    Should we have an aggregation rule applued in C2 and C3 ?

    Yes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.

  • Pages are not displaying properly

    Hi
    I am using EP 7.0 SP 7.0. Some of the pages (like new ivew creartion page, Identity management page under User Administration etc.) are not displaying properly. The background is showing totally white and only the buttons and text are visible.
    Though these pages were working fine before.
    Is there any configuration change which is causing this?
    Any suggestion ??????

    Hi,
    SAP recommends to use fully qualified domain names, when using the portal.
    For example, to enter into the portal use "http://machine_name.company_name.com/irj/portal., instead of "http://machine_name/irj/portal". 
    Failing to do so may lead to inconsistency in communication on client side between the page and iViews.
    Regards,
    Srinivasan T
    <b>helful answer=>points</b>

  • Photo's are not displayed in iPhoto

    I can see Events and can click on them to see pictures, but when I click on the individual photos, they are not displayed, although I can see them in the "filmstrip' at the bottom of the screen. iPhoto will show the names if someone is tagged in the photo.
    Using osx 10.6.8 and iPhoto 11. Everything has worked just fine for several years, but suddenly this started happening. It appears it took place after my last download of photos from my iPhone since that is the last time I used iPhoto.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Changes in custom.css are not displayed on iPad

    Dear all,
    I'm using a custom.css file in my Analysis Application.
    Changes in this CSS-file are immediately shown in my design in Design Studio and when executed on the BI Platform.
    However, these changes are not displayed when I run the application in SAP BusinessObjects Mobile on iPad.
    Thanks for sharing your ideas,
    Hans

    Hi Hans,
    If you make changes to your custom css file and reupload the file to your BIP and then open the report, does it help if your clear your browser's cache and reload the report again, do you see the css changes then?
    So instead of restarting the APS just clear the Browser Cache. The changes will be seen only in the browser and for the user who has cleared his browser cache.
    If you want to disable css caching there are different options available in general but with Design Studio only some of them can be implemented: you could configure your web server (for example Apache) to force refresh of cached data for example by setting some header parameters/values or with some other method.
    (just take into notice the performance implications of such a setting: the best option would be to force the reloading of the css file only when it changes and only for files that are changed, not for all css files all the time)
    There is a lot of information about overcoming caching techniques alone when you do a search on the stackoverflow site, for example this one has some good techniques:
    What is an elegant way to force browsers to reload cached CSS/JS files?
    Regards,
    David

Maybe you are looking for