Media files are not fully loaded when Premier Pro CC project is launched

I'm working on a project for more than a month and my Premier Pro(PP) CC was working fine until yesterday. When I launched the same project today, PP does not load all media files. (There are 600 media files and PP loads only around 200). The last message I can see in status bar is "loading media files. 403 remaining..". It doesn't seem to proceed further and leaves the sequence incompletely loaded. Until yesterday, the sequence was fully rendered and PP was loading the pre-rendered files.
I tried opening previous versions of project and faced with similar problems. Sometimes, the sequence doesn't show the red, green or yellow indicators at all. This has never happened in PP before. Wonder, what could be the reason and how i load my project to continue working.
Any help is appreciated.
Thanks
Neo

Hi,
Can you try to import this project in a new project in cc and check if that solves the purpose or not.
Thank You
Arjun

Similar Messages

Following Media Files Are Not Optimized For Final Cut Pro

I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
Thank you,
Crayton

I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
- I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
- I rendered them in Premiere, then transfered the rendered AVI file to FCP.
- When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
- Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
- Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
Did that make sense?
Thank you again,
Crayton

"Clip's Media Files are Not Currently Available" Alert Message

I am making an video project for school and so I put the video clips (JPEG) into my iPhoto Library and I put them together as a project. A few days later I went back to work on the project and I'm getting an alert symbol on the video clips that says "This clips media files are not currently available" when I hover over it. Does anyone know why?
Also, I need to export the project as an AVI or MPEG file and when I click 'Export Using Quicktime' an error message pops up that says "Missing Media... The following Event used in this project is not currently available: iPhoto Videos - English Video Poetry Project - The portions of the project which reference this Event will show black frames." Is this because of the alert that says my media files are not available?
Thank you!

This happens if you either delete your original films or rename the event in iPhoto. If you deleted the original film, you're stuck. If you just renamed it in iPhoto, the fix is simple: quit iMovie, rename the album in iPhoto back to whatever it was (whatever it says in the error message - in your case "English Video Poetry Project") then open iMovie. It should now be ok, and while iMovie is open, you can rename your album (in iPhoto) to whatever you like.
Note: if you rename your album, iMovie will cope but won't automatically save the change, so it will break next time you load it. To fix that, make some small change to the movie. Exporting it might work, haven't tried.

Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

Our illustrator files are not showing up when uploaded to creative cloud.

Our illustrator files are not showing up when uploaded to creative cloud. They are visible sometimes when we turn on and off the layers. Please help thanks.

If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved.

"error loading media-file could not be played"-when viewing webcams

When trying to load a webcam, picture loads but will not stream.
The following error message appears "error loading media-file could not be played"
Everything functions when using Google Chrome.
Any help would be much appreciated. The operating system is Vista.

Thank you for you reply - much appreciated.
I am a bit confused - if I do not have a player installed, how come that everything is OK when I use Google Chrome as a browser?
Many thanks,
Jimmy

Certain existing and newly saved photos are not fully loading..

I'm not sure if this is a result of the update, or related to a recent application I may have downloaded that interfaces with the photo library and/or camera (face melter™ or camera bag™)..
it also may be a result of the 2.2 update..
Here are some screencaps showing the issue.
First one, this is a photo that I have hosted that I took with my DLSR, I saved it to my phone via the touch and hold saving process, early on in my phones existance as you can see from the 60 of 600something, and it appears nice and clear(aside from the slight compression from e-mailing myself a screencap)
http://randy.mainevwscene.com/images/screenshot1.jpg
now here is a screencap of me visiting the hosted photo on safari today.. it also appears nice and clear
http://randy.mainevwscene.com/images/screenshot2.jpg
I held my finger on the photo, and have now been prompted to save (still clear)
http://randy.mainevwscene.com/images/screenshot3.jpg
and now here is a screencap of the photo I just saved in my photo library. It is obviously blurry... now all photos will do this for a split second while they load, but its as if its not fully loading the file when I view it.
http://randy.mainevwscene.com/images/screenshot4.jpg
Has anybody else experienced this or is it just me?
Message was edited by: thelumpya2

after messing around for a while, I figured out the chriteria that causes the blurry photos... I have no idea why however..
it is without a doubt related to the photos resolution... any photo that is of the resolution 800x533 or vertically 533x800 is having this blurry effect..
I found a random photo on google image search with a resolution of 800x533 of a lambo.. I saved it to my phone, and here's a screencap of the photo saved to my phone.
http://randy.mainevwscene.com/images/screenshot5.jpg
I then saved that photo to my computer, opened up photoshop and changed the resolution from 800x533 to 798x532 (constraining porportions) and then hosted the photo on my website.. Then I visted the hosted photo's URL on my iphone with safari and saved this image (798x532).. Here is a screencap.. you can see the difference clearly..
http://randy.mainevwscene.com/images/screenshot6.jpg

"This clip's media files are not currently available"

After moving iPhoto's folder to an external hard drive to save space, the iPhoto media files that are part of an iMovie project are no longer available when trying to play the project. They are still visible in the project window, albeit with an exclamation point inside a yellow triangle stating that the files are no longer available. I did allow the thumbnails to be re-generated after opening iMovie and thought that this would restore links to all relocated files.
My 13 year-old daughter is now very unhappy after I successfully destroyed her first iMovie project.

After moving iPhoto's folder to an external hard drive to save space, the iPhoto media files that are part of an iMovie project are no longer available when trying to play the project.
iMovie '08 uses "absolute" addressing when storing the path information so this message refers to the fact that your iMovie '08 project can no longer "see" the original files. To avoid this problem, move iPhoto library and/or change iPhoto event or file names BEFORE adding the content to an iMovie '08 project. Once added to a project DO NOT MOVE any source content or change any name/part of the file path.
They are still visible in the project window, albeit with an exclamation point inside a yellow triangle stating that the files are no longer available.
Scaled copies of the original images are stored in the named_Project packacge as individual frames of an MOV file called "Still Images." These images are still available for display in your project.

"This clips media files are not currently available" warning sign

I got this yellow warning sign on my project. The clips were visable below so I don't understand why it shut down. Once it got to the warning sign then the video just went black but kept running. I ended up just making a new project since it was a presentation that was needed immediately. It still says this about the project - 2 weeks later... I don't get it?
Is my computer just too slow? I only had 1GB or RAM at the time, since then I bumped up to 3, the max for my old macbook pro

Check below the message. It will show you the path to the missing clip. I'm betting the drive name is different. I'm betting you use TimeMachine back up. The reason I say this is because I use Time Machine for back ups. And my missing media files show a path like "HARDDRIVE 10/iMovie Events/file name" Problem is my external drive is named "HARDDRIVE". I have no idea where the "10" came from in the name. I spotlight search the HARDDRIVE 10 and it goes to the correct drive. I believe Time Machine's back up system is screwing with the directory paths of the working files. I have stopped using Time Machine.
I do not know HOW TO RELINK missing media files. ANY ONE?? HELP US!!!

Very Slow Video that Does Not Fully Load on Macbook Pro

Hi,
I have a macbook pro from 2007 (Mac OS X 10.4.11) and I have never had any issues with streaming video until yesterday. I have fast internet, and I can browse quickly, but my video is recently being very slow and won't fully load. It always says 14 out of 16 things loaded or some other number when I try to play a video. I have tried resetting Safari and emptying my cache to speed it up several times with no luck. I have Safari 4.1.2. I am wondering what I need to do to get this fixed as soon as possible because there are some important videos I need to watch for classes.
Thanks so much for your help!

!http://i46.tinypic.com/2nvn6f.gif!
"I have tried resetting Safari and emptying my cache to speed it up several times with no luck. I have Safari 4.1.2."
Do you have the same problem w/streaming videos using other browsers? Suggest that you re-post over in the Safari for Mac forums as your problem is not MBP related but rather software.
!http://i50.tinypic.com/izvwo1.gif!

ProEngineer files are not recognized by Acrobat 9 Pro Ext.

It seems that Acrobat has problems with the numbers at the end of Pro Engineer Files.
When you save a file in Pro E the file get a number at the end which marks the version of the file. So the name of a Pro E file is:
"Filename.prt.1"
save it again in Pro E generates a file named
"Filename.prt.2"
When I open Acrobat and choose "File/Create PDF/From File" and went to a folder with Pro E files, I can't see anything. Under File type there is "All known fileformats" set. I can set it to "Pro/Engineer" but that doesn't change anything.
Only when I delete the number at the end of the ProE file I can choose it in Acrobat.
When I edit an existing pdf-document and want to insert a 3d file from ProE I mark an area with the 3D-Tool and choose a file. In this fact I can see also files with numbers at the end. But when I choose this file and press OK Acrobat tell me that the file is not supported. Only a file with no number at the end works.
Is there a patch the make Acrobat recognizing ProE files with numbers at the end? Or some other help?

With the second one the problem was not not to inactivate the object.
When I have two objects on different sites and I want to show it to our customers I will navigate in the first site to a specila view. Then I change to the other site and navigate also to a specila view. Now I will go back to the first site to compare the to objects. But the view has been inactivating. It should be still activated when I scroll across the document when I set the option "Deactivate when = clicking on it and choose deactivate" Because with this option you said that it could only be deactivated when you explicit click on the object and choose deactivate. Thats the way it worked in Acrobat83D.
Thanks for the workaround with "Show toolbar" Now I can set the toolbar to "not shown" Thats excellent at presentation for customers beacuse there the toolbar is distracting.
b Now we have a bug list with four items:
*Open menu that does not recognize some filename extension
*Create object with 3D-Tool creates an error when choose ProE file with version number.
*Setting the option for 3D-object after creating it. (toolbar hide)
*Set the "deactivate when" option to "deactivate only when you click on it and choose deactivate" makes the object deactivating also when you navigate to other sites. It should still be activate.

Media Files do not appear in Library

Hi,
I am running essentials 2012 r2. I installed the media streaming pack. From the server console, and via windows explorer, I copied music, videos,and pictures into the applicable "\serverfolders\" sub-folder (created by windows during
the media streaming pack install). In the dashboard settings - media tab, I confirmed that those specific folders were set as "Yes" for streaming.
However, irrespective of the device I use on the network, the media files are not available to stream. This includes from windows media player in windows 8.1 machines, where the my essentials 2012 library shows up, but clicking on the library results
in a response of "no files".
Thank you in advance for your help.

Hi,
Based on your description, I understand that you can find this Digital Media Server (Windows Server 2012 R2
Essentials with Media Pack installed) under Network on client computers. However, you can’t find any music, videos or pictures file via Media Player. If anything I misunderstand, please don’t hesitate to let me know.
Please open Dashboard, navigate to STORAGE tab and select Server Folders. Under Server Folders, please open
Music folder, Videos folder and Pictures folder, then check if those files which you copied exist in those correct folders.
In addition, did you enable RWA (Remote Web Access) on the server? If enabled, please logon RWA and check if
those music, videos or pictures under Media Library in RWA webpage.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

HT1386 hi, when i am syn my books from my mac to ipad even after one full day sync itunes show wait for items to copy and the books in ipad are still not fully loaded. how do i fix this, i have a large collection of books

hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 books

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

Im running lightroom 4 and just purchased the Sony A7 and using its sd card. when I tried to load the photos, I got a message "the files are not recognized by the raw format support in lightroom"

Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
Does Lightroom 4 not work with the Sony A7?
Thanks,

Lightroom 4 cannot read the RAW photos from a Sony A7
You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly.

Media files are not fully loaded when Premier Pro CC project is launched

Similar Messages

Maybe you are looking for