Media Manager and Subclips

Hello,
Seem to be having a slight issue with media manager. I broke a master clip up into 5 subclips. I tried to use media manager to create 5 new media files from these subclips (which should result in the subclips becoming their own master clips), thus allowing me to delete the original master clip. FCP did create the 5 new media files based on the subclips, but the subclips in the FCP browser are still using the original master file as their reference. I then have to manually reconnect the subclips to their new media files. I assumed media manager would do this step automatically. Am I wrong in assuming this?
It seems to me that I've used Media Manager in this fashion before, but can't seem to figure out what I'm missing this time around.
Message was edited by: www.m-68.org

Well, the original subclips will not relink to the new media. NEW clips should have been created....and if you chose MAKE A NEW PROJECT they will be in that project. Just open that project and bring them over to this new one. If they weren't made into a new project, they should have appeared in this one. if not, just go to the FINDER and find the clips and import those into FCP.
Shane

Similar Messages

  • VCAST Media Manager and ENV 3

    OK, I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work.  I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos.  It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in.  I am unsing windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help!  I have all these pics on my phone that I can't get to my pc.

    I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work.  I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos.  It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in.  I am using windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help!  I have all these pics on my phone that I can't get to my pc.
    VCAST Media Manager and ENV 3
    Options  
    06-22-2011 10:10 AM
    Goldie11 wrote:
    OK, I always used the desktop Media manager to get my pictures off my phone, now I have a new computer and it doesn't work.  I tried reinstalling it many times (yes I have the device drivers) and it no longer brings up my phone in order for me to transfer my photos.  It shows FB, and all other options to transfer but note my phone which used to show up right away once I plugged it in.  I am unsing windows 7 but I also tired doing it on my XP machine but still it does not recognize my phone after I connect it, help!  I have all these pics on my phone that I can't get to my pc.
    Thank you Goldie11 for your reply. Adding to what was said, I wish to point out that you double posted on the same issue a minute of each other putting the word Ok at the start of your sentence as the only difference between the posts. The reason why this was pointed out is because one posting would be sufficient.  Many postings of the same issue exact issue does not get more attention than a single posting where as a double posting can cause confusion. In stating you always have used a desktop Media manager to get my pictures off your phone, What Windows operating system were you using at that time it worked to get the pictures off your device? Please check to see if you enabled the menu for Mass Storage on your device. 
    The USB Mass Storage menu allows you to transfer content from your phone via Windows XP when your phone is connected to your computer using a Micro Sd card inserted in your phone and with a compatible USB cable. When you have the Micro Sd card inserted in your phone, use the steps below to enable the menu for Mass Storage. I am also providing a link to  our website that can also provide additional troubleshooting steps. The link is:  http://support.vzw.com/clc/devices/index.html
    Using the Internal Keypad:
    1. Open the flip and press[MENU].
    2. Press Settings & Tools.
    3. Press Tools.
    4. Press USB Mass Storage. From there you can enable the Mass Storage to then transfer your pictures from the phone to your computer.
    Please note: Do not insert or remove the Micro Sd card while playing,deleting or downloading Pictures/Videos/Music/Sounds.

  • Verizon Media Manager and Aperture

    I just upgraded from iPhoto to Aperture.  Verizon Media Manager (VMM) sort of recognizes Aperture, but not completely.  It finds the Faces and Locations, but not the Projects.  I am using version 9.1.42 of VMM.  I saw in the pinned section that someone was using version 9.2.  Where can I get this version?

    mustbjones wrote:
    Yes there is but it says that the update service is temporarily disabled.
    Here is the link for the Mac download from Verizon: http://www36.verizon.com/fiostv/web/UnProtected/MediaManager.aspx?os=Mac.  It is likely the current version.

  • Media manager and EXIF rotation data

    My parents have FiOS and I recently helped them setup the Media Manager software so that they can view their pictures on the TV.  It works great, except for images that have been taken with the camera rotated.  Most other applications (Picasa, Canon ZoomBrowser, etc) are able to read the EXIF and rotate the image accordingly.  What is Verizon's timeframe for implementing this fairly basic feature into Media Manager?  If it is there, I apologize, and please let me know where it is - I was unable to find it.

    When you say rotate the photos using media manager, I assume you mean the PC component?  I suppose I could do that,  but that's really annoying (like you said).  Also, the problem is that then I believe that wouldn't they show up rotated wrongly in all of the other software (zoombrowser, picasa, etc) that does support the exif data for 'this side up' ?
    When you say you don't use it anymore, have you found another solution that can export photos to the Home Media DVR?  That's what my parents really want - the actual PC software, they'd prefer to use Picasa etc as that's what they're already used to. 

  • Media Manager and .motn files

    Hi all,
    I am having a strange problem....I have Media Managed a number of projects, and they have .motn files (either media that was on the timeline, sent to Motion, modified, then saved, OR, I used a Master Template in FCP that I made in Motion). When I open the MM'd project on my computer everything is fine, but on a different computer, FCP cannot find the .motn file. I assume it is because the template or associated files are on my system, but I would hope that Media Manager would create a .mov from that .motn file so it can open on a different system. Does anyone have any experience with this issue?
    Thanks,
    Dave

    Great explanations, but I want to make sure my workflow is sound before tossing something. Given that this is an integrated suite, I'm not too comfortable needing to do the following, so please correct me if I am wrong, or share the better way. After I Media Mange my Final Cut project, I need to:
    1) create a new folder called "media" inside the "media" folder Media Manager created.
    2) drag and drop the motion media from the media folder(s) created with "Copy to Folder" (explained above) into the media folder I just created.
    Question: Is my assumption correct that I do not need to drag and drop things like "wisp04," "basic blur" or "texture 01"? If so, why on earth are they included?
    If this is the workflow, I shutter to think how many people have lost media files because they assumed incorrectly everything was being collected via FCP Media Manager. Is there a step-by-step somewhere that you can point me to? Bonus questions: Can you speculate the reason or advantage of doing it this way? Do you think Apple should improve it? Thanks!

  • Best Way to Media Manage and Setup Disks?

    Hi Guys,
    I have a job coming up soon. It would be great to have some advice on how to manage the media properly and setup the Scratch disks.
    It will be shot on RED @ 24fps, with audio recorded separately, to be synced in FCP (6.0.5 I believe).
    We will have 4 internal SATA drives on the 3 Mac Pros (2 editors, 1 assist), all independent of each other, not on a SAN or other network.
    What would be the best way to setup these disks as scratch disks? Partitioning, with picture dailies on one drive's partitions, then sound dailies on another drive's partitions? Then perhaps Renders on another drive's partitions, with the project itself running off the system drive?
    Or perhaps a striped RAID 0 of all the 4 internal SATA drives?
    I'm thinking that we may transcode the R3D Raw files to Apple ProRes 422 before syncing/cutting.
    I will need to be copying media and projects between stations, to update each editor with latest dailies media, dailies bins and latest cut sequences.
    Any help would be greatly appreciated!
    Many thanks!

    What would be the best way to setup these disks as scratch disks
    Get a good drive or Raid array and format it as one drive. Then go to the System Settings and choose that drive as your Capture Scratch drive.
    Partitioning, with picture dailies on one drive's partitions, then sound dailies on another drive's partitions?
    No. Why do that? What is the point of partitioning and doing that? Just make folders on the Capture Scratch for what you need. FCP makes them automatically for footage you capture via Log and Capture or Log and Transfer. If there is footage you just Import...like audio files...then make a folder for the audio files and organize it like you think you should. Then Import.
    Then perhaps Renders on another drive's partitions, with the project itself running off the system drive?
    No...Renders can be on the same drive and partition. Where are you getting this idea that you need your media spread all over ****-and-gone? But you are right about your project file, that resides on your system drive, and you need to back that up daily onto your RAID, or other separate drive.
    Or perhaps a striped RAID 0 of all the 4 internal SATA drives?
    LORD no. You have 4 drive bays...one is used for the Operating System...do NOT raid that drive and then store media on it. And Raid 0 is fast, but not secure. One drive goes, the entire raid goes. Get the CalDigit RAID card and stripe THREE of the internal drives as a RAID 5...then you can get the HD ELEMENT as an external add-on if you need to expand. Or start out with an external RAID, like the Caldigit HD One, or Maxx Digital EVO HD.
    I'm thinking that we may transcode the R3D Raw files to Apple ProRes 422 before syncing/cutting.
    That is wise. Or edit with the proxies, then conform when you are done, saving drive space.
    I will need to be copying media and projects between stations, to update each editor with latest dailies media, dailies bins and latest cut sequences.
    Sort by DATE...that way you can grab all the new stuff. KEEP THE DRIVE NAME THE SAME...and keep the drive file and folder structure EXACTLY the same, and you will never need to re-connect.
    Shane

  • Example of workflow using media manager and files with 5DMkII

    Greetings,
    I hope someone can shed some light on this problem. I am trying to figure out how to take files from the 5DMkII(apple proRes 422) and edit low rez files on a laptop and port them back to a desktop for final hi res finishing? I've read around but I am still confused. haven't found any difinitive answers yet nor a complete tutorial on Media Manager. Please help.
    Hassan
    using one intel core duo laptop, one intel mac Pro, both with lots of ram and the newest final cut suite.

    http://lmgtfy.com/?q=offlineonline+final+cutpro
    Shows a surprising number of resources out there. One:
    http://www.kenstone.net/fcphomepage/offlinert.html
    is a few years old, but the concepts are all still valid.
    Patrick

  • Media manager and windows media center

    How do I set the Fios Media manager to stream content from the Windows media center to the TV?  I was able to set up media manager on a Vista desktop.  Would like to set it up on 64 bit new laptop that can be upgraded to windows 7.  Please provide step by step instructions.

    I do not think you can do this unless you can convert the Windows Media Center recording to a type of file which is supported by Verizon Media Manager.  Media Center files have an extension of  *.dvr-ms.     Verizon Media Manager ONLY supports .avi, .wmv, .flv, 3gp/3g2, .mpg(non-mpeg 2 videos) and .mp4/m4v  files.  I have been meaning to try this as well,  but have not yet. 
    Can anyone recommend a good and free video converter for this?  
    Blame MS for this... that is using a propriety video format...
    Let us know if successful.
    -oceanx

  • Media manager and Vista

    I can not get media manager to download on my Vista 32 bit computer. Any help?

    Media manager installed without problem for 2 of my pc's running Vista.  I had a problem similar to what your describing with another program I was trying to downlaod & install because of an incompatiability with a firewall program (Komodo) I wasa running.  Perhaps something on your PC is also causing the problem.

  • How do you configure MEDIA MANAGER and/or WINDOWS MEDIA PLAYER to play ALL songs in a PLAYLIST ?

    I have 41 songs in a particular PLAYLIST and it plays the first one OK but when it advances to the next one it "runs" but there is no Audio.
    I have to manually stop
    , go back to the PLAYLIST and then select the next song...then it plays OK.
    There's got to be a way to play the COMPLETE playlist w/o my "input"
    Tom
    Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
    Data Object 39.45

    It should be playing it automatically. If it plays manually when you clicked on the next song, theres a problem with the software. Please try uninstalling and reinstalling the program. Please post back when done.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Clip Import and Media Manager

    Prior to moving to my MacPro and using Final Cut Pro, I used a PC and Adobe Premiere Pro to capture several reals of tape resulting in over a hundred clips in AVI format. I'd now like to import these clips into FCP to begin actully working on these projects.
    However, when I import the clips I get a "Media Warning Message" that tells me the clips are not optmiized for FCP either re-capture the clips (not practical) or use Media Manager to "...create new copies of the files to improve their performance for multi-stream playback."
    I've tried to make sense of the documentaton on Media Manager and how it applies to this message but can not quite get a handle on what I'm supposed to do.
    So, any help or suggestions would be greatly apprecited. (Fortunately, I only have two project that I have to do this for.)
    Carl

    My apologies for the long delay...I finally figured out that when I installed FCS I got QT Pro. Today I tried a conversion of one clip from my old AVI files. So, my next question is the format and process. It looks simple enought: open the AVI clip and then export it. For two clips I used the settings "Movie to Quicktime Movie" and "Most Recent Settings". Is this what I'm supposed tobe doing? And, I again apologize for these very basic questions.
    Thanks,
    Carl

  • Media Manager does not appear on my second stb

    I downloaded Verizon Media Manager and installed it without problems.  When I checked my HD stb the program is listed and I could use it.  I do not have any kind of recorder on the network.  When I check my non HD stb the VMM does not appear.  This is the unit I want to use as it will allow me to play music through the home theater sound system.
    So, am I limited because I do not have a recorder or does the feature not work on non HD stb?  If this is the case, I might as well delete the program from my PC.
    Solved!
    Go to Solution.

    Hi. I apologize for the inconvenience. Unfortunately at this time, the standard def STBs do not work with Media Manager. It doesn't have to be a DVR, but the stb has to be an HD box. If you do not wish to upgrade the STD box at this time and depending on your setup, you can always swap the STBs and move the media manager functionality to where you want it. 

  • Creating a new project with media manager

    This one should be obvious but I can't quite figure it out: I used media manager to recompress my project into a smaller one. Media manager did a nice job with that and placed all the files into a new folder BUT - where is the actual project file?? If I use the actual fcp project file from the original- the settings are all different and it told me that some media files are missing or too short. Doesn't media manager create a new project file that works with the new recompressed files that it just created??

    BUT - where is the actual project file??
    When you have decided on the settings in Media Manager and then tell it to do the job, the first thing you see is a dialog asking where to save the project file. Use Spotlight to search for it.
    If that doesn't turn anything up, start MM again, it might have remembered the last Save location.

  • Where is the Media Manager in Desktop 6.0.0.40 ??????

    Last night the BlackBerry Desktop Manager wanted to do an update.  I've done these updates in the past so I thought it would be safe.
    This new version - 6.0.0.40 (Released August 3, 2010 Bundle 42) does not have the Roxio Media manager.  I have to be able to copy files between the BlackBerry file system and my PC.  Not just from the music, pictures and video directories.  I have files in other locations of the file system for my application.
      Paul

      I too had the same problem not being able to access any of my files in device memory after upgrading to DM6. Mass storage device is turned on.  I posted this issue on Aug 12 with no reply from RIM/BB with a fix.  I therefore was forced to reinstall DM5 with Roxio Media Manager and can once again access all my files on my device and move them around.  Now I have two DM'S running on my desktop.  As I stated in my post, I'm not impressed with DM6 at all!  Why release something that doesn't work? In my opinion it's a downgrade! 

  • Media Manager - Images tranferred - Displays a red X

    Have 8703e BB. Have Internet Services turned off directly by Sprint - don't need it and do not want to be charged for the non-communication Casual Data Usage (a slick illegal method cell phone companies charge when internet services are turned off - had to file federal charges before they took it off my bill). Can't download ringtones or pictures.
    Tried to transfer ringtones and images a while ago and Media Manager would not recognize my device. Finally found out that without an external card, the Media Manager would not recognize my device.
    However, just installed the new OS and Desktop Manager 4.2.2.14 with Media Manager and it recognizes my device! 
    I transferred a ringtone from my PC to my device and...YES...Viva La Vida plays!!!!
    BUT, two images I transferred show up with a generic image thumbnail and the picture displayed is just a small red X in the upper left hand corner. Yet, when I highlight the folder in the device in Media Manager, the pictures display very clearly.
    To also clarify, the pictures reside in MEDIA>PICTURES>DEVICE MEMORY
    Under properties for the folder, the file path is - /Device Memory/home/user/pictures
    The sizes of the pictures are 37KB and 65KB, hardly any different than the images in the Preloaded Pictures folder, which path is /Device Memory/samples/pictures
    Is this a BB issue or Media Manager issue? As I said, the ringtone transferred and works, the images transferred and are listed, but don't display. Anyone have a solution to this problem?
    I've reset the device by taking the battery out, etc. Nothing. Pictures still give me the red x.
    Thanks,
    Dan

    Ok, so this has been driving me nuts for such a long time. I did everything that anyone suggested and nothing worked. This included creating a new temp internet files folder, checking and unchecking all the appropriate boxes, creating a new profile, and
    most other things suggested. Then I cam across something on a forum (sorry I don't know the link) that made me think. I looked through the reg to the key HKCU>Software>Microsoft>Office>15.0
    (I use outlook 2013 but previous versions of office were there as well.)>Outlook>Security>OutlookSecureTempFolder. My setting was C:\Users\"USER"\AppData\Local\Microsoft\Windows\TIF\Temporary Internet Files\Content.Outlook\B5U77NH4\.
    NOTE: TIF is where I chose to create the new Temporary Internet Files folder. Ur most likely will be different or not there at all!!!
    What I realized was that the last folder in this setting was different that the actual folder on my harddrive. So I edited just the last folder B5U77NH4 to be the same as the folder on my HDD. WALA this worked and works great currently. All the other fixes
    sometimes worked for a short while but always reverted back.  I do have to say though that prior to doing this I went into Internet Options and deleted all the browsing history. EVERYTHING it sucked for freq visited websites but I wanted to start fresh.
    Then I physically selected every item that was still in my Temp Internet files folder, even B5U77NH4 and manually deleted every item. That way any folder that was created dynamically would be gone. What was left and would not delete was B5U77NH4 so that is
    the folder I chose to copy into the registry.
    ]This has been so frustrating but now it seems to work. I hope this helps.

Maybe you are looking for