Media transfer mode via usb cable not working

Hi. Can someone please help me. Whenever i connect my phone via usb cable, the media transfer mode is not working. Only the mass storage mode works. Im not sure what happened. Please!! It'll be a big help. I need the computer read my device. Suddenly it wasnt able to detect it. The usb cord in using are all good.

To solve the issue, open Device Manager on your computer to reinstall the driver for your device while your device is connected with your PC via a USB cable.
Microsoft Windows Vista and 7 users
To open Device manager on your computer
Click on the Start button. 
In the Search box, type device manager, and then press enter. 
Microsoft Windows 8 users
To open Device manager on your computer
Click the Desktop Tile to open the Desktop. 
Click >> at the bottom right of the taskbar. 
Select Control Panel from the Menu. 
Select Device Manager from the list of control panel items.
Note: If you do not see the screen with the Device Manager option, click the View by drop-down menu and select Small icons.
Microsoft Windows XP and 2000 users
To open Device manager on your computer
On the desktop, right-click on My Computer and click Properties. 
In the System Properties window, click the Hardware tab. 
In the Hardware, tab click the Device Manager button.
To reinstall the drivers for your device
Scroll down to the Universal Serial Bus controllers (USB section) of the Device Manager window. 
Look for an MTP Device: Media Device, Unknown Device or any other reference to your phone. Click on this entry and choose "Uninstall" whilst leaving the device connected. 
Wait a few minutes, and the computer will reinstall the drivers for the device.
Now, the phone is accessible via Computer/My Computer on your computer.
What are your thoughts about this forum? Let us know by doing this short survey.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Lightning USB Cable not working

    My lightning USB cable stopped working today. I tried to plug it in and it didn't charge my phone so I unplugged it and saw that one of the sides of the iPhone hookup looks kind of burned abs chipped off. I would post a picture but I'm not sure how.
    I just bought this iPhone 5 2 weeks ago, so I'm a little disappointed. Do you think apple will supply me with a new one?

    I suspect that they will, but the only way to find out for sure is to contact them. Use the correct phone number on this page. Alternatively carry the phone and cable in to an Apple retail store or service provider.
    Note that the Apple accessories for the iPhone fall under the same warranty as the phone itself.
    Best of luck.

  • TS2756 i downloaded the new itunes and now my hotspot via usb does not work on my macbook. (it was before) i have an iphone 5s.

    usb hotspot not working with new itunes. i have an iphone 5s. wifi hotspot still works but the macbook says in system preferances under iphone that its not connected or not responding. really annoying

    Why not?  What happens when trying to use it?
    "Will not work" is useless when asking for help.  Without specifics, no assistance can be provided.

  • USB cable not working

    Everytime i connect my USB it is not detected by PC....... I have tried with other PC'S but in vain.......
    Wht might be the problem??????????????????????????

    Those nothing happen when you connect your phone to the computer? Have you tried other USB slots on the PC? Does the same thing happen on other PCs?
    You have to be more specific, otherwise helping is very difficult!
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Dolby Digtal via optical cable not work

    Have an Audigy 4, recently bought a Digital I/O module as some searching lead me to believe that the Audigy 4 can do dolby decoding... (thinking about getting a PS3 and hooking it up to my monitor) Well, i've been testing with my PS2 and a DVD. With dolby off in the options menu I get stereo sound just fine, the moment I turn Dolby Digital on I get no sound whatsoever. The DVD i'm using to test got both Dolby Digital and DTS audio tracks and I made sure to select the dolby one.
    anyone have a clue what's going on?

    So creative lied then... Just lovely. the audigy 4 is supposed to have HARDWARE Dolby Digital...
    Message Edited by Freakazoid on 05-0-2008 09:40 PM

  • N95 crashes in Data transfer via USB cable, help?

    I ve been using my N95 with no problems for more than a year. Sometime ago I bought a new 8Gb Micro SDHC memory card, it was recognised by the phone and worked perfectly. But after the card was stored with data for more than 1gb, the phone crashes everytime I try to copy even the smallest file on the memory card through Data transfer mode via USB cable. Than I try to copy a file an error message is displayed in Windows XP and the phone reboots. The strangest thing that I can copy without a problem even a 500 mb movie file to the phone if the stored space on the memory card is say like 985mb, but after that it will crash even with the copying a 10 kb text file.
    Any help would be appreciated.

    No, its not the file system or Memory card itself - cause transfering a data through a card reader works fine and the phone recognize correctly everything transfered. Can it be the case of USB cable driver? May be I need to install it or go for a newer version? BTW, I removed Nokia PC Suite from my notebook - cause I dont used it much, but this program still used a lot of my PC resources without asking to. I belive that PC Suite is not nesessary for using the phone through a Data Transfer mode?

  • Can I transfer 720p video via USB cable

    Hi Everyone, technology has changed so much since updating to my recent Pro Mac. I want to transfer my current video and pictures from my Nikon CoolPix L120 to FCP. I'm not sure what the best route to take would be. Either a memory Card  or hook my camera directly to the computer via USB cable. The footage I want to trasfer is 720P. Mainly I want to transfer the footage to clear my card to store and clear space to record more footage of family events. Thank You all for your time. Oh yeah can USB handle a trasfer of 720p or will I need a HDMI or component to accomplish this task
    Thanks
    Jeff

    Sure it can do it...all you'll be doing is copying over the contents of the card.  Like you do any other data file.  Make a new folder on your hard drive (separate from your system drive...this will be your ARCHIVE drive), and then drag and drop the ENTIRE CONTENTS of the SD card.  Keep everything intact.  That's all you do...copy.
    BUT THEN...you need to transcode that to ProRes, as FCP will not work with the files as they exist now. It might seem like it will, but it won't.  use Compressor or MPEG STREAMCLIP to convert to ProRes, and put those files on yet ANOTHER drive (media drive) for editing.

  • Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

    iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro    

    Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

  • WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" GETS OPENED.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECCT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT

    WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???

    Please don't shout!   Using all uppercase means shouting on the internet.  If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
    Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet?   Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network?  Or do you have other options?

  • I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8  I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

    I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 
    I have downloaded the latest UFR II driver. (UK Version)
    I am trying to connect to the printer but the printer is not  appearing in my Print/Fax Preferences.
    When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
    Is there a problem with my Mac setup or maybe a setting in my printer?

    Mac UFR II Printmonitor
    UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
    MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
    Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
    Other Printers:
    Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

  • IPhone contacts: file transfer to Windows 7 via USB-cable  My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically

    iPhone contacts: file transfer to Windows 7 via USB-cable
    My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically my contact data and calendar details on the computer (OS: Windows 7). How can I solve this task? I will appreciate your valuable information, thanks.

    Using the iPhone, the USB cable, iTunes and Windows Contacts, sync the iPhone contacts to Windows Contacts. That will save them there. They are also included in the iPhone backup made in iTunes, and if you use iCloud.
    I'm sorry, I missed the calendar part the first time I looked. For calendar, you need a supported application on the computer (Outlook) or if you use iCloud, you can use the iCloud contacts and calendar app to sync.

  • Manually sync Notes and Safari bookmarks via USB cable for iOS device and an iMac with MacOS 10.7 Lion and iTunes 11

    "I'm aware that with MacOS 10.8 Mountain Lion there is no support for USB cable sync of iOS devices." Notes and Safari Bookmarks cannot longer be sync via USB cable with iTunes. For owners of iPhone 3G that cannot upgraded the device to a version higher than iOS 4.2, syncing Notes and Safari Bookmarks via usb cable with iTunes is the only option we have. There is no iCloud integration for Notes and Safari Bookmarks under iOS 4.2. I'm not updating to MacOS 10.8, because there is no way to sync Notes and Safari Bookmarks via cable. So I won't be able to sync those anymore unless I upgrade to a newer model of iPhone. I'm not into a new hardware investment, at least not for now. I just want to know if iTunes 11 running in MacOS 10.7 Lion still have the functionality of sync Notes and Safari Bookmarks via USB cable.

    Mac OS 10.7.5 and iTunes 11.0.4.
    jlbr wrote:
    I want to confirm if "other" still appears with iTunes 11 and MacOS 10.7 for sync Notes and Safari Bookmarks:
    Yes.
    If you are sincing Notes via iCloud, iTunes will tell you so.
    If you change the iDevice - Settings> iCloud > Notes - Off, they sync (or not sync) thru iTunes (either wifi or cable).
    So my question now would be:
    Is "Notes" manual sync checkbox option provided under "Others" in iTunes 11.0.1 with MacOS 10.7 Lion?
    If you change the iDevice - Settings> iCloud > Notes - Off, then yes.

  • E65 won't connect via USB Cable

    Hello to you all...
    I just got my new Nokia E65 and I couldn't be happier with it. Fantastic phone.
    However I can't connect it to my PC (Windows XP SP2) via the USB Cable...it just won't recognize it. I installed PC Suite with the latest cable drivers and nothing happens. When I connect the cable to the phone it asks if I want to use "data transfer" or "pc Suite" mode, but neither of them work.
    I'm able to connect to PC Suite via infrared, and that works fine. But I want to update my firmware and software updater only works via usb cable.
    Any ideas on what to to?

    more info needed, suite version, cable type, what is visible in pc device manager when you connect phone, what is visible in phone screen when you connct cable, etc.

  • My Ipod classic 160 gb,is dead only blinks when plugged to cpu via usb cable reset apple logo blinks as well Help!!!

    My Ipod classic 160gb is dead,It only responds when I plug it in to cpu via usb cable then the screen blinks.When I try to reset it the Apple logo appears but the apple logo  blinks on and off to as long as i hold the buttons down,when i realease the reset buttons it just blinks back and fourth to the blank gray screen,it worked fine yesterday night this morning its tanked.is this unit completely dead or can something be done at home?
    Thank you for your help
    Ice

    I wrote this long time ago, have a read and see whether it can be soloved
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Using a MB Pro in target disk mode via USB?

    Can a MB Pro be used in target disk mode via USB instead of Firewire?
    Thanks!

    Perhaps because it's called FireWire Target Disk Mode, and is not designed to be implemented via USB.
    Keep in mind that sustained data transfer rates with USB are much lower than FireWire (the 480 mbps for USB2 and 400 mbps for FW400 are max rates, not average sustained rate). Also, USB requires the CPU to manage data flow, while FW does not.
    FW400 or FW800 are will work, just not USB.

Maybe you are looking for

  • Problem Playing AVI Files From Adobe Classroom In A Book

    Hiya, I just bought the Adobe Classroom In A Book for Premiere Pro CS4.  However, when I try to run Lesson 1, Premiere Pro appears to be having a cow with the AVI file needed for the project.  It tells me that the codec is missing or unavailable.  I'

  • Saved an image as library and now all in iphoto images disappeared

    I was saving an image from email to iphoto, and somehow it was saved as my iphoto library. All of my photos are now gone, there were hundreds, and the one image I just saved is just there. Where are my photos??? Don't they get saved somewhere on my h

  • Open new tag window now blank - used to have links to web pages

    On previous version when I opened a new tag the web page which opened had the icons of my most popular web pages visited. How do I get back to this feature? All I get now is a blank web page.

  • Error Using java command. Please help!

    Ok, I'm having problems running my java programs. I use the javac command, and it compiles it right, and makes the class file. But if I type java anything It won't work. It comes up with the error message: Exception in thread "main" java.lang.NoClass

  • Why are some applications only accessable to one user

    Microsoft Office was installed using one user account. I tried to access it from another user account and it fails to launch with an error message. Also Parallels Desktop cannot find existing virtual machines when I attempt to access it from another