Mega 865 DVD RW drive - HELP PLEASE

Hello again been a long time since i have been here.  Anyway the reason im back is that my DVD RW (NEC 2500A) is getting "Power callibration" errors when burning .. tried all the new firmwares etc so looks like the drive is dead..
Now my question is .. what drive can i get to replace is .. i.e is the NEC 3550A good etc... or is there better onces...
I remember about a year or so ago there was a list on here but couldnt find it ( i did try and search)
Any help please
Thanks

"Power calibration" errors can be caused by a failing drive, or by using bad media. also, have you tried using a DVD head cleaning disc, in case the lens is dirty?

Similar Messages

  • Powerbook G4 12" 867mhz with dvd/cd drive problems - please help!

    Hello all,
    Just realized this thread should have been in this section. I put it in the using your powerbook section. Sorry for the double post. I just wanted it to be in the right section.
    I have just inherited a powerbook g4 from a family member who is upgrading to a new machine. It has dvd/cd drive problems. I'm totally new to OSX and a notebook machine and need some assistance. I've been briefly scanning the forums here and noticed problems with these drives on the model computer. Is there a way to fix this with an install of older software? Here is the problem, if I insert a cd into the super drive it mounts on the desktop, and itunes will play it but it skips and sounds very distorted. I haven't tried a dvd but was told it doesn't even see the dvds on the desktop. Here are the know specs on the machine:
    867mhz
    640 mb ram
    mac os x 10.5.1
    boot rom version 4.5.5f4
    the burner info: matshita dvd r uj-015
    firmware version: docb
    Thanks in advance!

    Good Morning Mac,
    According to your posted specs for the 12" G4PB you have the bare minimum requirements for Leopard. Even Tiger (10.4.11) should have 1GB RAM for decent performance (see my signature specs).
    An easily installed 1GB RAM stick can be obtained at either of these reliable vendors:
    http://eshop.macsales.com/ or http://www.crucial.com/
    However, we are getting ahead of ourselves. Try the following in this order:
    Repair Disk Permissions with /Applications/Utilities/Disk Utility/Repair DP, then do the following:
    Run Repair HD from original CD or DVD install disk ........
    Insert disk and re-start holding down the 'C' key until you see the spinning gear.
    At Installer level...... DO NOT CONTINUE
    At top left, use 'Utilities' Menu for Tiger or later and go 'Disk Utility'
    Select your HD volume with Operating system on...
    Select First Aid tab then select Repair Hard Disk button
    If "RED" errors are repaired, run again, until none are reported then +run again+ just to be sure you are OK
    Do NOT continue with the Installer... QUIT the Installer and return to the Finder ......... Eject the Disc
    RESTART ..... Repair Disk Permissions .... AGAIN!
    Try the above stuff first .... if that doesn't help, we will get into the "RESETS" steps next!
    DIXIE

  • On external monitor: GOOD.    after render & dvd: BAAAAD.   help, please!

    Hi, I edited a 60i NTSC video from a canon XL2, and it looks fine on the external monitor (TV), the FCP preview and everything. It even looks good when I export a QT mov with no compression.
    But as soon as I burn it on iDVD and play it on a DVD player, the whole interlacing business goes terribly, terribly wrong.
    I've tried all possible exporting settings, but it doesn't work. Should I de-interlace the clips? I've gathered from reading the forums that it might help, but it sounds like a desperate solution, since the text should be interlaced but not the video?
    I mean... what did I do wrong? Isn't ot supposed to just work straight-through with the NTSC DV Easy Setup and changing only to "None" on the compressing settings at export?
    Any help, please? Anybody?

    oh, OK.
    For exporting, I used the Export>Quicktime movie, just like you said, using the current setting (i.e. Compression:None)
    The DVD player was connected to a PAL TV, but it's OK because the DVD player can read anything. I know because I've watched NTSC as well as PAL dvd movies before.
    The Canon XL2 the Mac is connected to, via Firewire, is NTSC, connected via RCA to the PAL TV. Which means the signal I'm watching is Black & White... (I know this sounds WEIRD)... but it's O.K. because what I'm really checking as I edit is the interlacing problem that I got when playing the DVD on the dvd player.... : the BAD problem.
    How bad? Really bad. Any sudden movement, or panning of objects with vertical lines, like a painting or a building looks all wobbly and curvey and blurry and wrong, which is unnacceptable for the project I'm doing, as it is a professional work (Meaning that I'm charging money for it, despite the crazy assemble of different products and formats I'm using).
    I've gotten things that look good before, but never on Final Cut Pro.. I'm new to the program, and to Mac, and this is the first video I'm exporting to a DVD on this platform.

  • MEGA 865 BIOS Death, Need Help!

    I have searched the forums for a possible answer to my question, but to no avail...
    I flashed the BIOS of my new MSI MEGA 865.
    It said take out floppy disk and hit F1 to continue.
    I have flashed hundreds of BIOSes and never had this one happen.
    I hit F1 and got the following screen.
    Award BootBlock BIOS v1.0
    Copyright (c) 2000, Award Software, Inc.
    BIOS ROM checksum error
    Detecting floppy drive A media...
    Drive A error.  System halt
    That is the whole message.
    I have tried the following.
    New floppy drive
    New floppy cable
    new memory
    clearing CMOS w/power cord plugged in
    clearing CMOS w/power cord unplugged
    Any thoughts or suggestions would be great.
    Thanks in advance.

    If they don't then send them an email to ask if they can fix it for you (like swap the BIOS chip). It will cost but be the cheapest.
    There is a third option. You can fash an old PC which you no longer want with this BIOS file as long as it has the same BIOS chip then take that BIOS chip out and put it is your computer.
      Go on give it a go with your 861
    If you have no joy give be a personal mail and I do it for you with my 865 (expect 30 day turn around as I 'm in NZ)

  • Adobe Elements 12 not recognizing DVD drive, Help please!!

    In my Adobe Elements 12 for some reason when I go to burn, it saying no burners detected. Has anyone else had this problem and if so how can it be fixed. Thank you so much in advance.

    cricketsw08
    What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 using an opened project's Help Menu/Update? Please do so.
    Assuming a Windows compute for now.
    Is this "no burner found" situation described as "it never worked before" or "it worked before but not now"?
    If it has worked before, then I would ask
    1. Do you have iTunes on your computer? Have you recently updated it?
    If so, you might consider uninstalling both Premiere Elements 12 and iTunes, and then reinstalling only Premiere Elements 12. I would go through the scenario
    1. Uninstall Premiere Elements 12 and iTunes via Control Panel
    2. Do a ccleaner run through (regular and registry parts)
    CCleaner - PC Optimization and Cleaning - Free Download
    3. Reinstall of Premiere Elements 12 only.
    We will be watching for your results.
    Thank you.
    ATR

  • Macbook optical drive help, please?

    My Macbook's optical drive won't accept CD's. It spits them back out. And for DVD's, it just makes a loud noise and vibrates and doesn't spit them out. So then I have to restart my computer and hold the eject button to get them out. Please help, I just got new CD's and movies for Christmas and am dying to play them. Thanks.

    Here are Apple's troubleshooting steps......
    http://support.apple.com/kb/HT2801

  • In need of an external home network drive, help please...

    Hi,
    I am in need of an external home network drive in either 1 or 2TB form.
    It will be for an imac and macbook pro + ps3 to use.
    I saw this Western Digital one but was not sure how good it is -
    http://www.wdc.com/en/products/products.aspx?id=300
    I would be using it to back up HD final cut pro files a lot as well.
    Please help.
    Cheers

    Ralph Landry1 wrote:
    Over on the Tiger group one of the big hitters had unkind words for LaCie...becomes a matter of personal experience.
    aye, indeed.
    that's why i suggested the OP searches the forum for information on both drives
    personally, i swear by LaCie drives. i like drives sold by [OWC|http://eshop.macsales.com/shop/firewire> too. alas, they seem to have no NAS on offer ...
    JGG

  • Flash drive help PLEASE

    i have a 1gb godisk flash drive and for some reason it has made two disk images. it use to be where one of the images was the actual flash drive memory and the other for some reason was named "no name" and only had the size of 1.4mb. well yesterday the real memory disappeared and the only one that is left is the 1.4mb. if i try to restore it thats all it sees.
    so what do i do. is the flash drive trash now?
    PLEASE HELP.

    Hi Josh
    In Disk Utility select the flash drive and instead of Restore click Erase to reformat the volume. I would suggest MS-DOS if you ever wanted to use it on Windows.
    Hope that helps

  • Can't mount my external SATA drives - help please

    I have two SATA II drives taken from my now, knackered, PC and I want to mount them from my Macbook Pro. I have a the Sonnet Tempo eSATA card which has two sockets and I have connected that to Sharkoon SATA Quickport Duo which allows me to physically connect to the two drives. I don't need write access, just read access. However, when MacOS goes to mount the drives it tells me "The disk you inserted was not readable by this computer" and presents me with three options "Initialize...", "Ignore" and "Eject".
    When the drives were installed in the PC they were configured for RAID 0. I have a suspicion that this is what's causing the problem. Can someone please help me with getting these mounted? Do I need some special software? Am I missing something?
    Thanks all

    Seems like I'm on my own with this one then.

  • Optical drive help please

    I have a Satellite E205.  Can somebody PLEASE tell me how to keep the optical drive turned on?  It turns itself off when I run the computer on battery and the only way to turn it back on is to wait for the computer to ask me if I want to turn the optical drive back on, and that is completely random.  Geek Squad and Toshiba tech support have been unable to help me.  I'd sure appreciate it if someone could help me out here.

    For viewers: Microsoft has a Fix it button. See KB314060.
    -Jerry

  • Need to copy ipod content straight to an external drive - help please.

    I know I need third party software to transfer my music back to my pc from my ipod. I was not able to save it directly onto the hard drive - but can anyone recommend a good and reliable one please?
    I have just had a really bad experience with 'ipod to computer transfer' who took my money and ran!
    Could really do with some good advice.

    Hello eyam steve,
    And welcome to Apple Discussions!
    You don't necessarily need any software to help you do this, but what you decide to do is entirely up to you.
    There are several ways you can pull the music off your iPod and onto iTunes. The first link below provides step-by-step instructions for the direct method if you have a PC as well as a few third party applications (for both the Mac and PC) if you choose to go that route instead. You can also do a simple Google search for "copy music from iPod to computer" and you should receive a number of sites that can help you out.
    Just make sure that when you have your iPod plugged into your computer, that you don't hit "Erase and Sync" before completing the task of copying your music over.
    Also, if you have any purchased music, you will probably have to re-authorize your computer by heading to the Store drop down menu and choosing "Authorize computer."
    [5 Ways to Copy Music OFF your iPod and onto iTunes|http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipo d-windows-mac-os-x>
    Here are a few more helpful sites.
    [Copying Content from your iPod to your Computer - The Definitive Guide|http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipo d-to-computer]
    Or
    [How to copy songs your iPod to your PC|http://lifehacker.com/software/ipod/how-to-copy-songs-from-your-ipod-to-your -pc-105256.php]
    Also, here is an article for the direct method that is for both Windows Vista and XP.
    http://ipodtips-tricks.blogspot.com/2008/10/howto-transfer-music-from-ipodto-itu nes.html
    Hope this helps.
    B-rock

  • Problems with lacie 500g brick drive. help please?

    hello i just got a lacie 500gb brick drive and i have it attatched to my airport extreme. my imac24 seems to have mounted it okay because it was recognized and is showing up on my desktop. however, i installed the lacie backup software that came with the hard drive and whenever i click on it, it says:
    no external disk has been detected. please connect a disk to your computer and click retry.
    i don't understand because as i've stated, it is mounted to the desktop and allows me to copy files it to it effortlessly. however, i want to set up the backup software and it is not letting me. what do i do? any help would be greatly appreciated! thanks.
    luke black

    no this is the one that looks like a lego and it is pretty quiet. i dont know what is happening! i need nmore suggestions people!~ =) would doing what this suggests possibly help? thanks.
    http://docs.info.apple.com/article.html?artnum=305040

  • N00b mac user - dvd ripping & burning help please

    Hi
    I have got Mac the Ripper and bought Toast Titanium for my iMac but cant manage to get a copy done yet.
    I have tried to rip 2 DVD's using Mac the Ripper and on both it has come up with a warning at the end saying the video has 'bad sectors"
    I then open Toast and using the DVD_Video from Video_TS option and drag the Video_TS folder from the DVD I have ripped to Toast as instructed it starts compressing and then brings up a box saying
    Quote:
    " The drive reported an error:
    Sense Key = ILLEGAL REQUEST
    Sense Code = 0x24
    INVALID FIELD IN CDB
    I have also tried using Handbrake to rip the dvd's but that scans the dvd saying its scanning the titles but then just freezes
    Anyone have any ideas please?? Its an Intel iMac.
    BTW purely legal, making copies of ones I've bought for daughter so she can take on holiday with us
    Thanks

    Some DVDs especially those made by sony and disney are mastered with bad sectors on purpose as part of the copy protection process. Mac the Ripper is not very good when it comes to these discs. I have to use my wife's pc with dvd fab decrypter to copy these discs. It is not the fault of the imac by any means. Every disc I have copied except for those made by sony or disney since I got my imac have been perfect. Toast could be giving an error because the file from Mac the Ripper may not be playable. Try playing them first with the dvd player or VLC player to see if they work. If they do, make sure you have updated toast to the latest version. Good luck>

  • Connected network drive help please

    On os x snow leopard i was able to open finder and my network drive would show up on the navigation bar on the left.....
    Since i upgraded to lion i clicked the "command" + "," to make sure that it says "connected servers" is checked to be viewable...
    I cannot see my network drive still..... please help.

    Ralph Landry1 wrote:
    Over on the Tiger group one of the big hitters had unkind words for LaCie...becomes a matter of personal experience.
    aye, indeed.
    that's why i suggested the OP searches the forum for information on both drives
    personally, i swear by LaCie drives. i like drives sold by [OWC|http://eshop.macsales.com/shop/firewire> too. alas, they seem to have no NAS on offer ...
    JGG

  • MSI P965 Neo-F Bios doesnt recognize my DVD RW driver,Help!

    Hi,
    I just bought a MSi P965 Neo-F motherboard and when i boot  the pc because bios cant  find the DVD driver and
    i cant start my windows xp 64.
    I thought og upgrading bios but i cant because i dont have floppy driver  and my cd drive is unknown for bios.
     DVD model:  NEC DVD RW ND 3540 A
    system info:
    Maxtor 120gb
    Duo core 2 E6400 2.13
    Corsar 1024 DDr II 2X512
    Asus PhysicX
    Gforce7800GT 256
    Help!
    plz..

    Quote from: Zimbower on 14-February-07, 18:50:18
    Hi,
    yes i do get the green message about the dvd in green color after the memory check(MSI logo)
    somthing like ODD0 DVD RW
    I will try the second option you recommended,thx alot.
    Hello, welcome to forum. if you are planing to update BIOS:
    get P965 Neo BIOS ver. 1.6 CD Image (have modded boot record and integrate JMB361 Dos drivers.)
    How do i flash it?
    Extract image file from archive, and burn it to CD.(example: open it with nero burning rom and burn image file to CD)
    Make and ensure PC is stable, then reboot PC and boot from CD. you will need to confirm twice BIOS update when asked.
    after BIOS update is complete successfully, power down your PC, remove power cord from the PSU, hit few time power button to drain electrify from capacitors, touch some metal with hands to discharge any ES which you may have, then open the case and Clear CMOS then pull back power cord, and turn on your PC, will be notice CMOS CHEKSUM MISMATCH/ERROR, hit F1 to continue to rebuild DMI Pool Data, then reboot your PC, and enter in BIOS and LOAD BIOS DEFAULT, SAVE AND EXIT, go back to BIOS and apply your customs settings.
    if you want to use USB key to flash BIOS, copy AWFL865.EXE & W7235IMS.160 to USB drive, reboot PC and boot from bootable location, (hold "SHIFT" key when starting loading from bootable device to bypass startup files to avoid loading memory managers and other applications) navigate to folder which containt flash program and BIOS file and type from there:
    AWFL865.EXE W7235IMS.160 /cks/sn/py/cc/cd/cp/wb/ld/qi/f/e

Maybe you are looking for

  • TS3899 Cannot send email with new iPad air.  Works fine with old iPad and iPhone.

    Cannot send email with new iPad air.  Works fine with old iPad and iPhone.  I have deleted account and reinstalled.

  • The application was unable to start correctly (0x00007b) adobe

    HI All, Are you able to help?! I have just downloaded a trial version of Adobe Lightrooms from the Cloud and get the following error message 'the application was unable to start correctly (0x00007b)' Does anyone have a fix? @

  • How do you change the time of an animation?

    Hi, Cap 5.5 has changed animations.  They used to be separate objects on the timeline, and now they are part of a background? I used to stretch and shrink an animation to change its length just like any other object.  What's the secret now?  How do I

  • My LG G3 won't detect my bluetooth headsets

    I have two Sony Ericsson bluetooth headsets, MW600 and HBH-IS800. They both worked fine on my old Droid RAZR MAXX, but my LG G3 doesn't even detect them. All that it picks up is my neighbors Roku Player. I've made the phone visible, searched for devi

  • Qmaster seems to be corrupting my files

    I am running qadminastrator through qmaster with 5 nodes and one controller. I have run 5 tests today, that being submitting the same file to compressor via "this computer" and then my video cluster. My cluster creates ten segments and there are erro