Memory could not be allocated for the activation process. Please close all applications and tr again

Hello,
Just purchased a new laptop:
Intel Core 2 quad
4gb memory
1000 HDD
Photoshop CS 8.0 disc dead/scratched/unreadable. So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop. When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
Can anyone help (in layman terms please)?

Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
Mylenium

Similar Messages

Memory could not be allocated for the activation process. Please close all applications and try agai

I have just had a Windows XP failure and took the opportunity to replace with Windows 7. After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again" is shown and forces PhotoShop to close. I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD. The system is not heavily loaded! However, I cannot access Photoshop to check scratch disk allocation. How to fix???
Back to top

Yes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
Pattie
http://forums.adobe.com/message/5092533#5092533 is your post address
Download and installation forum:
http://forums.adobe.com/community/download_install_setup

"Memory could not be allocated for the activation process..."

"...Please close all applications and try again."
I recently had to wipe my hard drive and upgrade from Win XP to Win 7. I copied all my program files to an external disk first then copied them back. When I try to run PS, I get the above error message. Thing is, there are no other programs running. I'm not even trying to open a gigantic image; I'm just trying to start PS. I've tried the Ctrl+Alt+Shift thing to delete my preferences file right when PS starts, but that didn't help. Any other ideas? Thanks in advance.
Technical info:
Photoshop CS Version 8
Windows 7 Ultimate SP 1
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ 2.40 GHz
RAM: 2.00 GB
System type: 64-bit Operating System

Hi,
You won't be able to activate photoshop cs, so you need to download and install photoshop cs2 and use the supplied serial number.
more info:
http://forums.adobe.com/thread/1195856

Memory Could Not Be Allocated For the Activation of PhotoShop

CS2 Intel P4 3.0GhzHT, 3-4GB Ram WinXP
Photoshop won't open for me. It used to. Any idea how I might fix this?
When I try to open Photoshop, I get "Memory could not be allocated for the activation process. Please close all applications and try again."
I've done this with no applications after a fresh reboot and get the same message.
It only started recently. Photoshop used to open for me and was usable.
I got 3 or 4 GB of ram. I can't remember, but WinXP only sees about 3GB anyway. Either way should be more than enough, no?

Lee71 wrote:
hey john, thanks for resuscitating the topic. I on XP and it’s PS8
I have defragged, cleaned disc, etc.
In terms of symptoms, PS opens up and once open the prompt comes up. I hit okay and it shuts down.
i have tried CTRL + ALT + SHIFT whilst PS boots up; i get the prompt "ÿou currently have Adobe Photoshops primary Scratch and Windows' primary paging file on the same volume, which can result in reduced performance. It is reommmended that you set PS Primary Scratch Volume to be on a differrent volume, preferably on a different physical dirve."
I guess this means reinstall, partition and set up on a partitioned drive? I don't particularly want to take this course of action if there is an alternative. It doesn't make sense given I've got plenty of space.
No no need for that!
The message about the scratch drive is normal: the CTRL + ALT + SHIFT resets the preferences to the default for a single HDD. If you have more than one, go into Edit > Preferences > Performance and set the primary scratch drive to the one without the paging file.
Once you have OK'd that message it should go away if you do only have one HDD.
Partitioning will not do anything. The object of the separate drives (if you have them) is to avoid conflict between Scratch and Page file.
Do you still have your original problem?

Not enough memory to run Microsoft Excel. Please close other applications and try again.

Hi All,
I have windows 7 SP1 64 bit machine with 8 GB of RAM. and have office 365 pro plus installed on it. I use windows explorer preview pane a lot and suddenly it has stopped working. Whenever I click on any excel, power-point, word file with the preview pane
enabled it gives me the error as below:
for Excel: Not enough memory to run Microsoft Excel. Please close other applications and try again.
For Power point: there is not enough memory or system resources to start power point.
However the file opens fine when I double click it. I have tried the following"
1. Repaired, re-installed office 365 pro plus.
2. Disabled, enabled and changed virtual memory page file size. It did not make any difference.
3. Have verified folder and search options and they are fine for the preview pane.
Is there anything we can do about it?

Since we were unable to reproduce in my test machine, we were unable to determine the root cause of the problem. This seems to be happening when Windows is trying instantiate the Office application for the preview in the Preview pane, if the repair
Office still doesn't work, we might turn our mind onto Windows OS level.
Here is my suggestion:
1. Disable all of security programs or Anti-virus on that machine.
2. Disable DEP.
3. If you installed any video or graphic codec programs, please temporary to remove them to check the result.
Feel free to post back.
====================
I've summary the Symptom as following:
When trying to open files from a file share using Microsoft Office 2013 via Windows Explorer, we're see the following messages in the respective Office apps (see below). However, after clicking OK in the respective dialog, the Office files open from
the share as expected.
Microsoft Word
Sorry, something went wrong and Word was unable to start. (24)
Microsoft Excel
Not enough memory to run Microsoft Excel. Please close other applications and try again.
Microsoft PowerPoint
There's not enough memory or system resources to start Microsoft PowerPoint.
The issue does not happen if we navigate to the same file via the File > Open dialog.
Tony Chen
TechNet Community Support

"Memory full. Please close some applications and t...

I get this "Memory full. Please close some applications and try again" error message when manually entering the "Help" menu on my E51 and browse the help entries.
If I choose the Help option from within an application, it opens without problem.
I have about 35 MB left on c: and 5.5 GB/8 GB on the e: so what could be the problem?
I also get this error in the Application manager sometimes. Do I have too many apps installed?
Message Edited by flodis79 on 29-May-2008 10:16 AM

I get this error message sometimes on my e65 when browsing. Just happened now and there is about 45MB of RAM free and with running applications taking just over 1MB.
What gives ? Getting the battery out is not exactly a solution to see the rest of the web page if you see what I mean :-)
Message Edited by dukeinlondon on 06-Oct-2008 02:27 PM

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides

HI
When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
I 've no idea how to correct this weird error?
Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
regards,
james

Hello,
I don't reproduce this error.
Could you send your VI?
Regards
VéroniqueD
NI France

Your phone could not be activared because the activation server is temporarily unavilable

your phone could not be activared because the activation server is temporarily unavilable

Hello dhawalkc,
Welcome to the Apple Support Communities. if you are having issues with activation, the following article will guide you through troubleshooting the issue.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Regards,
-Norm G.

AM 7.1 CDSSO Could not get agent for the realm

Hi,
We are trying to configure the Cookie highjacking fix in AM 7.1 and apache agent 2.2. When we try to go the agent, the browser gets redirected to the Access Manager. After authentication, I get the error message on the browser "resource access denied".
On the AM side, I get following error in amCDC file:
04/19/2007 06:19:19:919 PM PDT: Thread[service-j2ee-3,5,main]
CDCServlet Initializing...
04/19/2007 06:19:19:922 PM PDT: Thread[service-j2ee-3,5,main]
CDCServlet init params. Restricted Token Enabled: false Auth URL Cookie Name: sunIdentityServerAuthNServer Auth URL Cookie Domain:Deployment Descriptor: /amserver
04/19/2007 06:19:19:925 PM PDT: Thread[service-j2ee-3,5,main]
CDCServlet.doGetPost: Query String received: goto=http%3A%2F%2Feauthdev.etc.net%2Fcgi-bin%2Fprintenv%3FsunwMethod%3DGET&RequestID=15432&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Feauthdev.etc.net%3A80%2Famagent&IssueInstant=2007-04-19T18%3A19%3A19Z
04/19/2007 06:19:19:934 PM PDT: Thread[service-j2ee-3,5,main]
SSOException caught: com.iplanet.sso.SSOException: Invalid session ID.
04/19/2007 06:19:20:430 PM PDT: Thread[service-j2ee-3,5,main]
Forwarding for authentication to: /UI/Login?goto=%2Famserver%2Fcdcservlet%3FTARGET%3Dhttp%253A%252F%252Feauthdev.etc.net%252Fcgi-bin%252Fprintenv%253FsunwMethod%253DGET%26RequestID%3D15432%26MajorVersion%3D1%26MinorVersion%3D0%26ProviderID%3Dhttp%253A%252F%252F
eauthdev.etc.net%253A80%252Famagent%26IssueInstant%3D2007-04-19T18%253A19%253A19Z
04/19/2007 06:19:27:293 PM PDT: Thread[service-j2ee-4,5,main]
CDCServlet.doGetPost: Query String received: TARGET=http%3A%2F%2Feauthdev.etc.net%2Fcgi-bin%2Fprintenv%3FsunwMethod%3DGET&RequestID=15432&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Feauthdev.etc.net%3A80%2Famagent&IssueInstant=2007-04-19T18%3A19%3A19Z
04/19/2007 06:19:27:294 PM PDT: Thread[service-j2ee-4,5,main]
WARNING: Advice List is : null
04/19/2007 06:19:27:294 PM PDT: Thread[service-j2ee-4,5,main]
CDCServlet.doGetPost: targetURL = http://eauthdev.etc.net/cgi-bin/printenv?sunwMethod=GET
04/19/2007 06:19:27:294 PM PDT: Thread[service-j2ee-4,5,main]
CDCServlet.doGetPost: gotoURL = http://eauthdev.etc.net/cgi-bin/printenv?sunwMethod=GET
04/19/2007 06:19:27:321 PM PDT: Thread[service-j2ee-4,5,main]
CDC Servlet: Directory matches for http://eauthdev.etc.net:80/ is:{AMIdentity object: id=eauthdev_apache_8080,ou=agent,dc=mycompany,dc=com AMSDKDN=uid=eauthdev_apache_8080,ou=agents,dc=mycompany,dc=com={sunidentityserverdevicestatus=[Active], sunidentityserverdevicekeyvalue=[agentRootURL=http://eauthdev.etc.net:80/]}}
04/19/2007 06:19:27:400 PM PDT: Thread[service-j2ee-4,5,main]
WARNING: Invalid GoTo URL: http://eauthdev.etc.net/cgi-bin/printenv?sunwMethod=GET for Agent ID: http://eauthdev.etc.net:80/
04/19/2007 06:19:27:400 PM PDT: Thread[service-j2ee-4,5,main]
ERROR: CDCServlet.doGetPost:Exception occured
java.lang.Exception: Invalid Agent: Could not get agent for the realm
at com.iplanet.services.cdc.LdapSPValidator.validateAndGetRestriction(LdapSPValidator.java:200)
at com.iplanet.services.cdc.CDCServlet.redirectWithAuthNResponse(CDCServlet.java:288)
at com.iplanet.services.cdc.CDCServlet.doGetPost(CDCServlet.java:247)
at com.iplanet.services.cdc.CDCServlet.doGet(CDCServlet.java:194)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:796)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:917)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:391)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:297)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:178)
at com.sun.identity.setup.AMSetupFilter.doFilter(AMSetupFilter.java:86)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:178)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:270)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:241)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:182)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:160)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at com.sun.webserver.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:149)
at com.sun.webserver.connector.nsapi.NSAPIConnector.service(NSAPIConnector.java:995)
Does anybody knows what is going wrong?
Thanks in advance,
Vivek

One more thing Vivek : seems like the problem comes from the fact that the there's 3 checks done to ensure the goto URL matches what's in the agent profile, and one of them (the port check) fails.
agentRootURL has port 80. The gotoURL doesn't.
Try not specifying a port number for key agentRootURL and tell me if that works.
Side note : it seems you might not have the following property enabled in your AMConfig.properties :
com.sun.identity.enableUniqueSSOTokenCookie = true
HTH,
N.

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

IDoc type could not be determined for the IDoc

I am trying to Post the payment run through the transaction F110.
In the payment run log i get the following message:
"IDoc type could not be determined for the IDoc"
But in fact the IDoc is generated and it is displayed in We05.
I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
Has anybody Idea about why this error is coming and how i can resolve this?
This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
Would appreciate if anyone can please help on the same.
Thanks & Regards,
Narayanan

Hi,
If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
still if you are having any problem
Check in the below path:
IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
2. Assign Release Approval Procedure for Release for Payment
3. Define Users with Authorization to Payment Release
Thanks
Chandra

Memory could not be allocated for the activation process. Please close all applications and tr again

Similar Messages

Maybe you are looking for