Memory Errors with NX4 and Adobe 3D

After installing the Adobe 3d trial version,I've had nothing but problems with NX4.Out of memory errors when there is plenty available.REinstalled NX4,same problems.Uninstalled adobe 3D,and the problem went away.We would like to purchase this,but not until this particular problem is solved.
Win Xp SP2
2 GB Ram
Dell Precision 370
Pentium 4
NX 4.0.0.25

are you working on big 3d models in nx4 ?(to check that, please do a right click on the windows task bar and open the task manager and check the memory used by nx4 with your 3d models loaded)- did the problem also occured with small models ?
if you memory footprint approaches the 2gb barrier, then 3d capture might be the cause ot your memory problems, to get rid of it, just open acrobat3d and go in the menu edit/preferences/3d capture and delete nx4 from your list of capturable applications.

Similar Messages

PSCS4 Memory Error with Image Processor

When I use the image processor in PSCS4 to process a large number of raw files using ACR 5.1 (Nikon D3 NEFs), I consistently receive an error message after about 10-11 files have been processed that the instruction at 0x696336ab tried to read memory at 0x6C (or thereabouts) and the memory could not be read. I am saving as JPEGs with the color space set to sRGB.
I de-installed and reinstalled PSCS4, but the error persists. The image processor worked fine with PSCS3. A workaround that solves the problem is to process the files as a batch using a simple action to accomplish the task.
I am running Windows XP Pro Service Pack 3 with a dual Xeon processor and 2G of error correcting memory.

Hmm.. I was getting a similar error with CS3 and was very happy to find that it appeared to be cured in CS4. The CS3 issue would appear if I tried to process more then 100 NEFs. My workaround was to do them in smaller batches (60-75). Perhaps you might try reducing the memory alotted to PS or run it without any other apps running?
Russell

Problems with SharePoint2010 and Adobe Reader X

hi all,
i have a big problem with SharePoint2010 and Adobe Reader x. We can open .pdf Files from SharePoint but not Safe. The Error Message is "
SharePoint, SQL and OS are installed in English. The problem is that the site was probably created from a German template. One would have to create the site from an English template and then add the other languages by MUI. It is a matter which language site in the settings under Language Settings is uppermost to:
how can the problem be solved?it looks like here, the reader still an error..
andre

Hi,
Could you repost the error-message that you see in Adobe Reader? The problem might be because of a known bug in Microsoft SharePoint server 2010. Certain required field types are missing in the German/French site templates which cause a SOAP request on the server to fail. A workaround is to add these field types to the library. You could add these fields manually or using a script. You could look for following field types which might be missing from the site template.
"Content Type ID","Approver Comments","Name","Document Modified By","Document Created By","File Type","HTML File Type","Source URL","Shared File Index","Title","Template Link","HTML File Link","Is Signed", "Document ID Value", "Document ID", "Content Type", "Created", "Created By", "Modified", "Modified By", "Has Copy Destinations", "Copy Source", "Approval Status", "URL Path", "File Size", "Item Type","Sort Type", "Effective Permissions Mask", "ID of the User who has the item Checked Out", "Is Checked out to local", "Checked Out To", "Unique Id", "Client Id", "Virus Status", "Check In Comment", "Edit Menu Table Start", "Edit Menu Table End", "Server Relative URL", "Encoded Absolute URL", "Property Bag", "Level", "Is Current Version", "Item Child Count", "Folder Child Count", "Select", "Edit", "UI Version", "Instance ID", "Order", "Workflow Version", "Workflow Instance ID", "Source Version (Converted Document)", "Source Name (Converted Document)", "Document Concurrency Number","Relink", "Merge", "Path"
Thanks,
Richa

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
thanks

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
thanks

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

There is not enough memory error with 8gb installed

Description:
I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
It reads:
There is not enough memory to complete the operation.
To increase available memory, close other open documents or applications.
But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
Steps already taken:
Tried copying after a system restart with no other programs running.
Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
I reinstalled Flash
I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
Any help would be greatly appreciated!
P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.

Thanks for chiming in Mataxia.
One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this...

Out of memory error with 80Kb file?

Hi, my pc has 2Gb of Ram, a page file that is setup correctly
and the physical ram is almost non-used (500Mb)
When I start DW and load a php file of 80Kb approx., it just
hangs/locks up. When I wait for it, it gives me an "out of memory"
error, and when you look in windows task manager, it just keeps
hogging up ram.
My laptop is a "simple", 1Gb Hp pavillion, and when I open
the file there, it just works like it's supposed to, using about
70Mb of ram, instead of the gigabyte(s) it does on my developer
machine....
Adjusting virtual memory has absolutely no effect.. It seems,
after some reading, that people using 2gb of ram, have the most
problems in this area?
Adobe, please help here !
EDIT: i just tested another file, 136Kb large, that loads
normal!, so it has to do with the files in specific... If you want
to test the files, just download "Simplemachines Forum" and load
the "load.php" or the "post.php" files from the source directory,
to trigger the lockup...

mmm... just tried using a "workaround" if you still can call
it that
Installed a virtual machine (xp) with less than 2gigs, and it
works... I really hope someone else has got these kind of errors
yet.... 2500$ + software, wich I can't use for now... Using
notepad2 for time being...

[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)

@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in!

Out of memory Error with jdk 1.6

Hello,
I have a swing application launched on the client with the help of Java web start. The applications works fine in jre 1.4 and jre 1.5. The heap sizes are :
initial-heap-size="5m" max-heap-size="24m"
But when I run this using jre 1.6.0_05-b13, I am getting Out of memory Error, java heap size. And I see the memory usage is growing rapidly which I didn't notice in other jre versions (1.4 and 1.5).
Does anyone have any idea on this?
Thanks in advance,
MR.

Thanks for your response Peter. During my continuous testing I identified that error happens on jdk 1.5 also. And I have increased the min-heap-size to 24 MB and max-heap-size to 64 MB. But in that case also I noticed the out of memory error. The interesting thing is, the min-heap-size is never increased from 24MB and lot of free memory also.
Memory: 24,448K Free: 12,714K (52%) ... completed.
The Outofmemoryerror triggers from the reader thread which does the job of reading the data from the InputStream. One thing is we are continuously pushing more data on the output stream from the other end. Is that any limitation on InputStream which can hold some definite amount of data.
Please throw some light on this.

Memory Error with Tomcat 4.1

I have a Tomcat 4.1 installation on a Linux 7.2 box. Tomcat uses
mod_jk with Apache. We are currently in a development phase and change alot of jsp's on a daily basis. Eventually it seems that Tomcat runs out of memory for the compilations and gives the following message:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: -1 in the jsp file: null
Generated servlet error:
[javac] Compiling 1 source file
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
After Tomcat is restarted everything appears to to be okay for a time. Eventually this problem will come back. The problem appears to be only when jsp files are changed. Running jsp's ( which were previously compiled and have been unchanged) run just fine.
In the /var/tomcat4/conf/tomcat4.conf file I have the following command
uncommented:
JAVACMD="$JAVA_HOME/bin/java -Xms6m -Xmx100m"
I am running java 1.4.1 on the Linux box.

I was looking at the Jakarta web site and under the Tomcat4.1 documentation it gives a description of what is new in 4.1. It states:
Rewritten Jasper JSP page compiler
Performance and memory efficiency improvements
Among other things. Could they have a memory leak?

Memory fault with N97 and loss of apps including d...

Hi folks,
I wonder if someone made experiences with this and found a remedy to regain lost applications especially if the tool to do so ordinarily is itself affected :-(
During a trip out of a sudden photos and videos made with the camera started to vanish as soon as they were once played or seen. Or to put it better they got corrupted. The respective photo application was still working fine with a memory chip, but not with the mass memory. There certain file folders contained rubbish - a hotchpotch of signs instead of somewhat sensible names. Among those affected folders where E:/Images/camera/... and E:/data there with j2me, Others and temp...
I could do nothing as any attempt to work on or remove those files was leading to a general failure message.
Some apps got lost, yet could partly be reinstalled by download! and OVI Store, which was cool as I was abroad for quite some time and could thus recover some workable status.
At home I reconnected the device to my Vista PC and after some initial failures I got a error repaired message when switching to the USB mass storage option. After this the system was cleared yet I lost any operation of download! which is despite the OVI store still of importance to load general tools and language and speech tools which I use frequently. Pressingthe referenced button simply gives a short flicker on the screen and that was it - no starting up of the application.
I have the latest firmware for my build 11.0.021 and yet tried as well a reinstall with the nokia software updater - in vain.
As I have a number of licensed software which I can only partly reinstall without new costs - Nokia please create a full backup tool securing all components as Ghost and Co. would do with any harddisk - I am keen on a minimal invasive solution.
I have not tried formatting as I dislike to loose the licenses and I will probably have to get the whole newly bought device exchanged, but this will lose any programs not registerable to a new IMEI.
So I prior to doing something unrecoverable I would appreciate any good ideas and hints.
Can you help me?
Message Edited by efceps on 19-Sep-2009 02:48 PM

Well, after performing a little more research, I think I know why this occurred. When the iphone crashed due to an app being updated via iTunes (I think it was NowPlaying), the Texas Holdem app was not selected in the sync applications tab upon reboot. When the iphone rebooted, I didn't check the applications tab and just re-synced. That caused the Texas Holdem app to be deleted from the iphone (and all the statistics as well). After playing a few games last night and then upgrading to version 1.1, my statistics were still saved.
So, this probably won't affect everyone but be careful when you sync to upgrade any app and make sure the app is selected in the applications tab first. It would probably help to also make a backup before upgrading any app and sync up iTunes with the iphone. This doesn't help me much but hopefully it will help someone else. Hopefully Apple will fix this issue very soon as updating any app shouldn't be this difficult.
Brent

Out of Memory Error, Buffer Sizes, and Loop Rates on RT and FPGA

I'm attempting to use an FPGA to collect data and then transfer that data to a RT system via a FIFO DMA, and then stream it from my RT systeam over to my host PC. I have the basics working, but I'm having two problems...
The first is more of a nuisance. I keep receiving an Out of Memory error. This is a more recent development, but unfortunately I haven't been able to track down what is causing it and it seems to be independent of my FIFO sizes. While not my main concern, if someone was able to figure out why I would really appreciate it.
Second, I'm struggling with overflows. My FPGA is running on a 100 MHz clock and my RT system simply cannot seem to keep up. I'm really only looking at recording 4 seconds of data, but it seems that no matter what I do I can't escape the problem without making my FIFO size huge and running out of memory (this was before I always got the Out of Memory error). Is there some kind of tip or trick I'm missing? I know I can set my FPGA to a slower clock but the clock speed is an important aspect of my application.
I've attached a simplified version of my code that contains both problems. Thanks in advance for taking a look and helping me out, I appreciate any feedback!

David-A wrote:
The 7965 can't stream to a host controller faster than 800MB/s. If you need 1.6GB/s of streaming you'll need to get a 797x FPGA module.
I believe the application calls for 1.6 GB over 4s, so 400 MB/s, which should be within the capabilities of the 7965.
I was going to say something similar about streaming over ethernet. I agree that it's going to be necessary to find a way to buffer most if not all of the data between the RT Target and the FPGA Target. There may be some benefit to starting to send data over the network, but the buffer on the host is still going to need to be quite large. Making use of the BRAMS and RAM on the 7965 is an interesting possibility.
As a more out there idea, what about replacing the disk in your 8133 with an SSD? I'm not entirely sure what kind of SATA connection is in the 8133, and you'd have to experiment to be sure, but I think 400 MB/s or close to that should be quite possible. You could write all the data to disk and then send it over the network from disk once the aquisiton is complete. http://digital.ni.com/public.nsf/allkb/F3090563C2FC9DC686256CCD007451A8 has some information on using SSDs with PXI Controllers.
Sebastian

Configuration error with CS6 and Mavericks

I installed OS 10.9.2 on an empty drive, then CS6 and other apps. Now I upgraded to 10.9.3, and I get "Configuration Error" when I try to launch a CS6 app. (Error code was 16 at first; now it's 1.)
The Adobe website says the fix is to change permissions on two folders (SLStore and Adobe PCD) in Library/Application Support/Adobe. However, those folders don't exist anywhere on my drive.
I can run the separate uninstallers for InDesign, Illustrator, and Photoshop, then try to reinstall, but I'm not filled with confidence that such an approach will get me anywhere.
Should I try the separate uninstallers? Should I wipe the drive and start over? (Lots of hours tied up in that, but I'll do it if I have to.)

Well, he's not working in the file now so there's no .idlk file for anything in the folder.

Problem with Windows7 and Adobe Flash freezing computer?

Hello All, There is a problem with Windows7 and my Adobe Flash causing my computer to freeze. So, Skype, videos, etc will not work. Have tried many things to solve problem. Can Oracle VM be used to run a different operating system...such as XP or Vista where Flash will work properly? I would hate to have a new operating system installed on a new computer. thanks

If you mean Oracle VM VirtualBox, then yes, definitely. A free download, it installs and runs great on Windows 7. http://www.virtualbox.org/

[Partially Solved] Error with bsdtar and symbolic links

I'm trying to install a package (asymptote) from AUR but am running into an odd error. During the extract phase I get errors like
asymptote-1.70/base/asy-keywords.el: Can't update time for asymptote-1.70/base/asy-keywords.el: Function not implemented
bsdtar: Error exit delayed from previous errors.
I found a post that may help: http://bbs.archlinux.org/viewtopic.php?id=50750. Do I really have to do this?
By the way, I too am running on a Linode (Xen virtualization).
Thanks,
Luis
Last edited by banbh (2009-05-24 00:22:13)

I have not got to the bottom of my problems with bsdtar and symlinks. I suspect it must have something to do with either my configuration (derived from the Arch image provided by Linode) or running under virtualisation.
However, others might find my work-around useful, so I document it below.
I downloaded asymptote from AUR using wget ("wget http://aur.archlinux.org/packages/asymptote/asymptote.tar.gz"), unpacked it, then patched the PKGBUILD
$ diff -u PKGBUILD.orig PKGBUILD
--- PKGBUILD.orig 2009-05-23 17:58:47.000000000 -0400
+++ PKGBUILD 2009-05-23 18:00:49.000000000 -0400
@@ -11,9 +11,12 @@
'used if present at compile time: freeglut, gsl, fftw')
source=(http://downloads.sourceforge.net/sourceforge/asymptote/$pkgname-$pkgver.src.tgz)
md5sums=('1ded335bc63b662a6eb920a4c065706c')
+noextract=($pkgname-$pkgver.src.tgz)
build() {
- cd $srcdir/$pkgname-$pkgver
+ cd $srcdir
+ tar xzf $pkgname-$pkgver.src.tgz
+ cd $pkgname-$pkgver
./configure --enable-gc=/usr --prefix=/usr \
--with-latex=/usr/share/texmf/tex/latex || return 1
make asy || return 1
After that I simply did a "makepkg" followed by "sudo pacman -U asymptote-1.73-1-i686.pkg.tar.gz"

Memory Errors with NX4 and Adobe 3D

Similar Messages

Maybe you are looking for