Memory speed problems with Neo2 Platinum

Hi all -- I'm trying to figure out a problem I'm having getting my memory frequency up to speed. Right now I have two 512MB sticks of Crucial Ballistix PC4000 RAM but I can't get them running any faster than 166Mhz each (or 333 Mhz DDR). I'm using a AMD Athlon 64 3500+ processor and I've got my ratio set to "auto." Is there a memory frequency setting I'm missing? How can I get these sticks up to speed?
Thanks!

dont worry - i did exactly the same! Not sure if was being a bit slow or the manual is written badly but it confused me
Out of curiosity what is core center reporting your cpu temp as? Mine says around 58c but im not sure if its just being reported wrongly ( even though a few people have said this 1.2 bios fixes the temp isssue ).

Similar Messages

Memory leak problems with loading videos over and over.

I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
What the flash should do:
- Should be running for 7 days without having to restart the projector.
- Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
- Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
- Still images are used when the video clips are done playing (MovieClip in stage).
- Should run automatically when there is no user interaction for X minutes.
What the problem is:
- The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
Here is some code from the video loading and playing:
var fVideo:VideoPlayer;
VideoCreate();
function VideoReady(pEvent:VideoEvent):void
trace("VideoReady()");
     // start playing video
fVideo.play();
function VideoLoad(pUrl:String):void
     trace("VideoLoad(" + pUrl +
     VideoCreate();
     if (pUrl != "")
          if (fVideoFolder + pUrl == fVideo.source)
               fVideo.seek(0);
VideoReady(null);
          } else {
trace(fVideo.state);
               if (fVideo.state !=
VideoState.DISCONNECTED) fVideo.stop();
fVideo.close();
fVideo.load(fVideoFolder + pUrl);
     } else {
// error no url
function VideoCreate():void
     trace("VideoCreate()");
     // remove old one
     if (getChildAt(0) == fVideo)
          removeChildAt(0);
     fVideo = new
VideoPlayer(1024, 768);
     addChildAt(fVideo, 0);
     fVideo.autoRewind = false;
fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
fVideo.addEventListener(VideoEvent.READY, VideoReady);

Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

Do you encounter speed problem with time capsule

I have speed problem with my networth using time capsule

What's your Modem? If you are using DSL (ADSL) or fiber optical ?

Problem with NEO2 and sata controller card

1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
2.BIOS version: The newest one, 1C0 or something.
3.External VGA Type: Geforce 6800 GT
4.CPU Type: AMD 64 3500+
5.Memory Type: G Skill ZX 2048mb.
6.Power Supply Type:
7.Operating System: Xp Pro
8.Problem Description:
Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
I wrote
"Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
I would be very thankful if you could help me with this problem.
//Martin

I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
Quote:
have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
I think this card do not properly support HDD above 120G.
Please respond to: [email protected]
http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
Btw: you have xp sp2 ?
48bitLBA is not enabled in the first version.
http://www.48bitlba.com/winxp.htm
Edit:
Here's another with complete different setup and same problems
http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
I doubt it has anything to do with your motherboard and/or bios.
Btw: I looked at innovision and their drivers in download area are very old.
Get the latest SIL3112 drivers for XP here:
http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
so having command queing set ON will cause major conflicts in data transfers.

No Power With Neo2 Platinum

I posted this problem earlier, and somehow it double-posted. Now the posts are gone, so I will try again.
I just bought a Neo2 Platinum today, but I cannot get any power to it. I have made sure the power button connection is good; I have replaced the power supply; I have pulled everything out of the motherboard except for the CPU. Still can't get the thing to power on. What can be the problem?

Thanks for the psu details. it would do no harm to post the rest Graphic card drives CPU. Add them to your signature then there there every time you post, saves a lot of re-typing. You can even get them looking better than rollercam's .(RC - It seems shorter now what u altered)
yes your psu is low on the 12v rail & may cause issues down the road. but should at least turm over the fans.
assume
Quote
for now check:-1) CPU Fan cable is connected to motherboard CPUFan1
2) 4pin 12v Cable from PSU is connected to Mobo (clip aligns correctly with mobo)
3) 20pin cradle connecter is aligned & seated properly.
4) case power connectors are properly connected to mobo JFP1 & JFP2 see page 31 of manual.
Checked out ok.
If you have any front panel usb/fireware leads from your case unplug thenm, the connectors may not be compatable & may be shorting.
If still nothing
Then try taking mobo out of case in case there's a short somewhere.
Mount mobo on a piece of cardboard, the tray from the mobo box is ideal, or a wodden table. mount just memory try 1 module only 1st in slot 1, graphics card, plug in 12v 4 pin & 20pin cradle. Connect case power switch.
this option also gives you chance to recheck the risers that your mobo rests on make sure there are no extra ones, should be 9, & check that these align with mobo screw holes.
Also check that the backplate for the mobo back panel clips securely in case. If loose it's been known to make contact with pors/mobo & produce shorts.
Whilst board is out of case you might also check cpu is mounted correctly.

Memory Speed loss with CPU upgrade 2.6 - 3.0

I have a n 875P Neo board with 2 banks 512m DDR400
I have just upgraded my cpu from 2.6G (800 FSB) to 3.0G (800FSB)
My BIOS is ver 1.8 (8/9/ 2003)
I have found that my memory speed timings have dropped by 30% since the upgrade. Will I get better results if I update my bios to ver 2.0 (the latest bios)??
Sysoft Sandra Memory Benchmark shows to memory timings to be about 25% lower than expected
Can anyone help??
Thanks
M Miller

The 875P Neo and 865PE Neo2 boards are kissing cousins They have a lot in common.
It would help if you create a signature and put all your hardware information in it. Things like what type of video card and what type of ram all have an impact on what performance modes you can operate under. See the Rules at the top for what to include and how to do it.
You should also read P4 Neo Unofficial Guide and Moan Guide.

Memory speed problems?

don't know if anyone else has experienced this but let me know if you have and if there is a way to fix it. So I am running XP Pro from Boot Camp 1.4. I test my Windows performance with PC Pitstop. When I was running Vista on 1.3 I tested and the memory speed was 8230 MB/s, very good. Now when I running XP with 1.4, my memory speed has dropped to 3300 MB/s. Does anyone know a different speed test for XP.
Also is there a speed test for OS X?
And there seems to be a lag sometimes in response. I will sit down to use XP and it will take a minute of sitting there before I get "dings" and responses to input.
It seems that there might be a problem with the defrag also because even when the drive has just been defraged, it still gives me a defrag warning. Any help on this would be much appreciated.

After looking into this a little more, it seems that the transfer rate I am getting for my memory is consistant with DDR2-3200 RAM which runs at DDR2-400 speeds. Does this mean that the memory is not as fast as it could be. Do they make DDR2-667 modules?

How do I report a major memory leak problem with Firefox 3.6.10 in WinXP?

After I installed Firefox 3.6.9 on a WinXP desktop, I occasionally had minor memory leak problems, reflected by getting "out of virtual memory" messages. I upgraded to 3.6.10 when notified that it was available and that it supposedly fixed stability problems. Ever since then, whenever I use Firefox, it starts out quick as a flash, but very rapidly slows down to a crawl, and has twice brought my system to a halt. IE does not cause this, nor any other program I use, but the execution speed of all programs slows as badly as Firefox. If I knew where to get older versions, I would back up to 3.6.9 or earlier. The situation now prevents me from using Firefox much at all.

Im running windows 7, Firefox 3.6.10 and before i updated to 3.6.10 my CPU never went above 10% with Firefox open. Now it can spike well above 50% and i have nothing different from when i had 3.6.9 to now when i have 3.6.10.
There is no evidence for me to suggest one of the additions i have is causing it, its all pointing to Firefox itself and the last update.

Problem with P45 Platinum during POST

Good day!
I have MSI P45 Platinum mainboard and from to time to time it freezes during POST with AMI bios POST code - 423C. This happens right after the message that "4096MB OK" and before the detection of SATA/IDE drives. When this happens, the only way to make the system run is to turn off the power (pressing Ctrl-Alt-Del of Reset would result in the same error) - after that the POST procedure finishes correctly and I don't experience any problems afterwards (system is rock-solid after POST completion).
So my question is - can anyone explain me what does this post code mean (D-Leds are not much of a help)? Is this a mobo problem or may be there is some kind of incompatibility with my hardware. I should mention also that I've tried all versions of Bios both official and beta without any success.
This problem does not trouble me that much (doesn't happen often), but still I would like to understand what may cause it.
P.S. My system config - iC2D E8300/MSI P45 Platinum/4x1Gb DDR2-800 Geil Black Dragon (5-5-5-15)/MSI Radeon 4870 1Gb OC edition/HDD 250 Gb WD + 120Gb Seagate/SB Audigy 4/DVD-RW Asus 1814/PSU TT Toughpower 700w (w0105)
Thanx in advance and please excuse my poor English

Thank you for the reply!
Quote from: Jack the Newbie on 16-December-08, 06:39:42
What is your current BIOS Version?
I've recently flashed the latest beta bios version - 1,5 beta 6... but it produces the same error as did the latest official bios v1.4
Quote from: Jack the Newbie
Does the same problem occur with only one memory module installed?
I don't know actually. But thanks for pointing this out - I will test the system with one (and then with two) module(s). I've tested the modules with the memtest86+ software (the latest version, which supports P45 chipset) several times and it showed no errors. So the modules are OK and they worked without any problems with my previous mb (Gigabyte P35-DS3).
Quote from: Jack the Newbie
What do the POST-Status LEDs of the board tell you, when the system freezes at the described stage?
Well, I guess I don't fully understand what does the combination of LEDs tell during the freeze. I'll try to describe the combination -
LED12 - OFF LED13 - GREEN
LED8 - RED LED7 - OFF
LED14 - OFF LED10 - GREEN
LED15 - RED LED11 - OFF
In mobo's manual this diagnostic LEDs are grouped in 4 groups and the description of the group that most closely resembles my case is - "Testing base and Extended memory etc." But I'm not sure that I'm identifying the problem correctly, because of the LEDs that are OFF.
Quote from: Jack the Newbie
Are you experiencing any freeze and/or stability problems appart from the described problem?
No, as I said in my initial post, once it get past this stage everything is running smoothly - OS boots and all software, including the most demanding games or tests, are running OK.

Several problems with Neo2 Plat - BSOD, lockups, reboots

Hi all!
I bought myself a new computer today (or well, I bought the parts and built it), but I'm having problems getting it to run well. I've only had Windows installed for a little over four hours, but have already had lots of problems:
1) I will get random Blue Screens of Death. The computer will reboot itself so quickly that it's hard to see what error messege it gives, but I thought I was something about IRQ. So I disabled all devices that I don't need, to cut down on possible IRQ conflicts.
2) The computer will freeze. This happens occasional, and doesn't seem to be related to any particular task. One time it froze will I was running 3DMark 05, the other time when I selected a file on my SATA-disk.
3) Files are corrupted. A lot of files (again on my SATA drive) seem to be corrupted - I get Cyclic Redundancy Check errors on a lot of them, and I'm pretty sure the files worked in my old computer.
4) The computer will reboot for no reason. Just as the freezes, this doesn't seem to be related to anything in particular. Suddenly the comp will just reboot.
This is my hardware setup:
Mainboard: MSI Neo2-Platinum
CPU: AMD64 3500+
CPU Cooler: AMD Boxed Cooler
RAM: 2 x 512 Corsair 3200 Value Select
Graphics Card: Gainward GeForce 6800LE
Sound Card: Sounblaster Audigy2 ZS
DVD-Drive: Nec 2500A
PSU: Antec TruePower 480
Generic Floppy Drive
Does anyone know what might be causing my problems? If it had been only reboots I would've guessed that my PSU is the culprit, but with the corrupted files and BSODs as well I keep thinking it must be the mainboard...

Argh, putting the SATA disk on channel 3 instead of channel 2 didn't help anything at least. Got a BSDO -> Reboot while trying to access files on the S-ATA disk.
I should say that I'm using the latest drivers for everything - graphics card, soundcard, BIOS etc. Also, I seem to be having a problem with Live Update. When I try to use it, it say "The Service Has Not Been Started".
Also, I tried to go into BIOS and change HTT from 5x to x4, but when I tried to do that the BIOS seemed to freeze up. I couldn't escape from the HTT dialouge box (which by the way didn't show any text, only the title), not by pressing Escape. CTRL-ALT-DELETE worked for soft reboot, though.

Cooler compatibility with Neo2 Platinum

Hello,
Would anyone know if the Thermaltake Mini Typhoon CPU Cooler, CL-P0268, is compatible with MSI K8N Neo2 Platinum motherboard? Isn't it too heavy for that mobo?
Also, would anyone recommend Zalman CNPS 9500 led for the same mobo?
Any other recommendation?
Thank you in advance,
Jose

Go for the Zalman, its much better than the Mini Typhoon. It will cause no problems with your motherboard.
Russell

MOVED: Overclocking issues with Neo2 Platinum

This topic has been moved to Overclockers & Modding Corner.
Overclocking issues with Neo2 Platinum

hiya nocturnal
1st in Integrated Peripherals / IDE Function Setup....disable sata1/sata2 dma transfer and enable sata3/sata4 dma transfer...sata 3 is top on left side of board one closest to cpu.
2nd ... Cell Menu / DRAM configuration is where you set memory timing 1T/2T
3rd...Cell Menu / AGP Frequency ..set it to 67
just My 2 cents but why don't you take Everything back to stock (cpu & vid card) , Do the above and see if it will boot. the biggest problem you have (my opinion) is your memory...you do not state if it is pc3200/400 ...if it is go 200 Max Memclock (step 2, 1st option)
set the CAS settings to stock..see if you can boot to windows, then and only then go Play as in see what your sandie will do with that memory..Leave your vid card stock until you get a stable windows enviorment...also if you do shift F2 ..alt F3 it opens up other settings within our bios
I believe you will be upgrading your memory real soon if ya got the o/c bug
Hope this helps
ps...by the way what type of power supply do you have ?

Problems with Audigy Platinum and Firew

Hi,
I've been running my Soundblaster Audigy Platinum on my Win2k-System for some years and have just encountered some weird problems with the Firewire-Connector. When I connect an external DVD-Burner everything works fine. But when I connected an external harddisc for the first time recently, the system completely flipped and rebootet without any messages. When I connected the dri've via USB it wasn't recognized automatically (what it should have after the manual) but after installing the Drivers on the Disc. Afterwards also the Firewire-connect was possible, the dri've was recognized and appeared in the Explorer. So far so good.
But now, everytime I try to copy files larger than some Megabyte the dri've stops copying and I get an error message. Then the dri've disappears in the explorer. When I connect the dri've to my Laptop (XP Pro System) everything works fine. I already tried to google the problem and found some users with the same problem, unfortunately no answers to their posts. Is there someone who can help me (us)?
By the way, I already tried to re-install the drivers for the audigy...

hi kakarocht, tks for help me.
My mobo is new, i buy all the config recently.
i'm searching in the forum, and found this topic https://forum-en.msi.com/index.php?topic=85631.0
my HD SATA is the same of this, i will try to remove it, and then tell here for you.
sorry for my english again.

Mouse Scroll speed problems with JVM

I could not find Java (Apple’s JVM ) forums, so I might be posting this in the wrong forum. With that disclaimer, here is my issue:
I am running into a problem where the mouse-wheel scrolling speed configurations are not being properly passed to Java applications. I have set my scrolling speed to the maximum, all works well with regula apps, yet when I use my mouse-wheel to scroll and window in a Java application, scrolling it is unbearably slow, the wheel becomes useless.
Also, horizontal scrolling does not work in any java application either.
I believe these are a problem with Apple's JVM implementation. Are there any workarounds?
Has anyone else experience this?
JVM v1.5

Does this happen with all Java apps or just a handful? I ask because I found that OpenOffice scrolls so slowly that it's unusable. However, I think this is an issue with OO, not with Java. Other Java apps scroll fine for me.

Who has no problem with Audigy2Zs Platinum Card what configuration are you usi

Since upgrading to Audigy2Zs Platinum,I've had a host of problem not experience on my previous Audigy's which were simply set-it and forget-it. SO, I'm interested in YOUR configurations, speakers, creative apps, and dvd player since I mostly use my rig to view DVD's. my config is;
PowerDvD 6 Deluxe with all audio paks, set to Spdif
THX console: 5., analog, 96 Khz, speaker above monitor, Volume Balance Adj ALL 6.0"
EAX Console: preset Garage.
Surround Mixer: Volume, Bass, Treble 75%(-7.5db). Wave, Speakers Volume controls 00%.
Speakers Klipsch Promedia 5. THX.
Rig: ALienware 2002 Area-5, P4 2.5 with Intel MBO.
HOw 'bout it!
regards,
AL

ASUS P4P800 Deluxe (Intel SATA RAID controller, VIA IDE RAID controller)
Intel 3 GHz P4 HT (Socket 478)
SB Audigy 2 ZS Platinum
GB Corsair DDR 3200 RAM
ATI Radeon x800 XT All-In-Wonder 256MB AGP 8x
Sony 8x DVD Recorder (all formats up to +DL)
Sony 52x32x52 CD-RW/6x DVD-ROM Dri've
(2) 20 GB Maxtor SATA HDD (RAID 0)
(2) 80 GB Maxtor ATA HDD (2MB Cache, RAID 0)
80 GB Maxtor ATA HDD (Standard config on VIA controller)
Antec Soho Server tower running an Antec 480W NEOPower power supply
After my last reconfig, I tried to load the drivers for the sound card. I kept getting a problem with the computer restarting in mid-install. After finishing the install in Safe Mode, I went to load a midi file and my computer restarted without warning. After trying to upgrade to the new beta drivers, my computer restarted once more (stopping at the soundfont driver). Apparently, the SoundFont drivers no longer work in my setup. I'm currently using the MS GS Wavetable Synth for MIDI.

Memory speed problems with Neo2 Platinum

Similar Messages

Maybe you are looking for