Menu button stopped working

So I've been having troubles with my menu button. Sometimes the button works but most of the time it doesn't. All the other buttons work fine. I've tried just about everything. I even tried to restore it but that didn't work. I'm planning on going to the Apple store to have them check it out. Is there any way for me to exchange it for a different ipod though or am I stuck with the nano?

Apple will only replace with another nano...
However with the 5G the click wheel has definately shrunk... All that I can say is try hitting it a little different.
Otherwise it could just be a small fault and a new device may not have this.
Good luck with your trip to the apple store... Hope you find results...
As I've had my 5G since it was released and I have had no issues to date.

Similar Messages

  • Clickwheel/Menu buttons stopped working + ASP/Warranty question

    Today, my year old 2nd gen nano's clickwheel and menu button stopped working. The hold button works, Itunes sees the thing, disconnecting the headphones does what it supposed to do and everything appears to be in order, except for the buttons. Neither resetting, nor restoring the software did resolve the issue and I am left with a small, elegant, brushed aluminium finished brick with music in it.
    Luckily, an Apple ASP isn't particulary far from where I live and I could and probably should bring it there. However, I am currently in a country that is not the one I bought the Ipod in and my purchase receipt and anything else that might have came with it is some 3000 km away.
    Does anyone know if bringing just the player to an ASP (it does have a serial number) has any remote chance of getting a warranty repair? And, if not, is it worth it even bothering with the repair, in terms of cost?

    Hi Kevinsen and welcome to the BlackBerry Support Community Forums!
    I would suggest performing a backup of your BlackBerry® smartphone then reloading the software as shown in the article below:
    KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
    or
    KB19915 - How to perform a clean reload of BlackBerry smartphone application software using BlackBer...
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Please help! my menu button stopped working =

    i just bought an imove speaker for my ipod mini and everything was going great until i disconnected my ipod from it...now my menu button doesnt work! its stuck on shuffle songs and i cant reach my playlists or any other features anymore....essentially it has become an ipod shuffle...please please plaese help...why isn't my menu button functioning anymore? thanks so much for any help!!
    ipod mini    

    okay so i see theres a lot of cases of freezing...guess that could be it....ill try resetting it after work...hope thats it...thanks anyway....

  • Menu button stopped working on my Ipod mini

    Heading basically says it all, I am stuck in the same playlist unless i reset the ipod. All other factors of the clickwheel still work. I can hear the menu button clicking down just the ipod won't respond to the pressing of it.

    Hi,
    I have exactly the same problem, and so do dozens of others from what I can determine on the 'net.
    Menu button is still working as the reset function works fine (reset does not work unless both MENU & SELECT are pressed together).
    Have tried loading latest software, and then reverting to original software - problem is still the same.
    Anyone solved this problem, or have any ideas?
    Thanks

  • Menu button doesnt work

    All of a sudden the menu button stopped working. It was fine one day then I put the ipod on charge, several days later when I tried to use it again the Menu button no longer works...
    Actually I just realized that the Play/Pause button doesnt work correctly either. When you push and hold it it does not turn the device off anymore although it would still pause/play the songs. The forward/reverse work ok.
    I tried resetting the Ipod using the updater and that didnt help. I also tried Menu + Select ... strangely enough it resets the device but after it resets the Menu key doesnt work.
    Has anyone experienced this problem?
    I submitted a service request. Is there any way of modifying the service request since I just realized that the play/pause button is screwed up also?
    Finally, when you turn the hold on/off is that supposed to turn the backlight on/off as well? I never paid attention to it but now when I turn hold on that also turns the backlight on...is that screwed up as well?

    I am having a similar problem with my mini - it turns on fine and will scroll through the menus, but will not respond by going back through the menus. Instead, it freezes on a screen and does not respond to anything except resetting it (menu & select button). Doesn't seem like the proper way to navigate through the screens and is completely frustrating. I was ready to cry yesterday at the gym because it wouldn't work and didn't know the reset "trick" until 3 hours later! I have also had many problems turning it off too. My brother who owns a regular iPod thinks I am crazy but at least I am seeing people out there with similar problems.
    On another note, I have to say I am completely disappointed with Apple. The company loves to portray this user-friendly persona, but in truth it is not that way at all. I received my mini in May and have just started to use it full force this month (October) ... now my 30-day phone support has expired and if I want "live" help I have to pay $50 for extended service. That's bull - I'd like some real answers but have been relegated to chat boards (no offense) and trying to troubleshoot the problem myself by finding close but not exact postings. It seems like such a deceptive bait & switch ploy by Apple. I am tempted to send my mini back for service but just read on the web site that I could be charged up to $100 for service. Again, sounds very sneaky so not sure if I should take the risk or live with a highly annoying product defect. Any suggestions?

  • Menu button not working

    I've got a 6gb mini, had it since Sept 05. Yesterday the menu button stopped working, so I can't choose what music it plays, it only plays on shuffle as I can't get back up. I haven't done anything to it so I wondered what to do. I got my iPod in the US but I live in the UK. I bought the Applecare Protection Plan when I got it but forgot to enroll it, so I don't know if it's still valid. It should still be covered under the protection but I don't know if I've left it too late to register it. What do I do?

    If doing a Restore and reset do not help, very likely a hardware issue
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php

  • S110 menu button not working

    Hi, 
    We're on our honeymoon and been taking good pictures without any problems with Canon S110 until yesterday. The camera suddenly has the following problems:
    1. turn on normally but then immediately taking one photo no matter what mode it's on. 
    2. once the single photo was taken, the camera completely freeze except the display button working and the  delete button (working but not be able to select delete)
    3. shutter button and zoom in or out is completely useless
    3. MENU button is NOT working at all
    We have been trying the following:
    - new fully charged batterry
    - new SD card
    - turn off and remove both battery and SD card overnight
    It's very frustrated and we only have this camera on this trip. Please help!!!

    Just registered to report my solution.
    I have a similar problem with the PowerShot S110 of my wife's sister.
    At some time a menu button and all joystick buttons stop working.
    The problem was because of sticking zoom control (yeah it's very stupid).
    At the normal state zoom control must return to central position!
    When zoom control is on the left or right position - some buttons don't work.
    I hope this info will be usefull to someone.

  • Today my M-Audio iControl play button stopped working on my Mac Book Pro after I unplugged the USB cord.

    Hello,
    Today my M-Audio iContol play button stopped working after I unplugged it from the USB port and then plugged it back in. I have a Mac Book Pro Mac OS X 10.7.3 and I only use it for Garage Band. The iControl will only play a very short snippet of a song then shuts off? (Like a millisecond) My space bar works fine as well as the GB play button using the mouse. I have searched for the GB preference files listed on some blogs but I cannot find them...help please!! One more thing, I plgged the iControl into my other Imac and it works fine so the iControl is ok.
    Thanks!

    I have searched for the GB preference files listed on some blogs but I cannot find them...help please!!
    In MacOS 10.7.3 the User LIbrary is hidden. To find the Preferences Files use the Finder "Go" menu:
    Click onto you Desktop to bring the Finder forward.
    In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
    Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
    Regards
    Léonie

  • Down and menu button stopped workin !

    Hi i was using my phone the other day and all of a sudden the menu button and down button stopped working ! i dont have a clue whats going on ! i have a n80, ive tried reinstalled my firmware but there seems to be a problem with the nokia updater it keeps saying network connection lost but i used it last night and the program worked prefectly ! Anyone got any idea's for why these 2 buttons would all of a sudden stop working?

    Hi... i have an N80(1gb card)... its 20 months old...
    i also have a very weird prblm.. wen ever i slide up or down the fone... the whole screen either goes completely white.. or completely blank.. for 3 secs.. and comes bak to normal...
    my selections keys, directions keys... stop working.. and after lots of retries they start...
    now my red button has completely stopped...
    i thot its s/w issue.. formattd mem card...and reinstalled firmware.. but both prblms still persist...
    tat button prblms may be coz of rust or dust below the keys.. but donno wats causing the whole screen to go white / blank wen slided up or down... will take it to nokia care.. hope they figure out sth..
    if any1 knows the soln.. pls help...
    thnx...
    www.chandrubs.co.nr
    http://www.youtube.com/Chandrubs
    http://www.ChandruBS.co.nr

  • What makes the Print Screen and End Buttons stop working?

    I am 3 weeks into the trial period. Twice before, the Print Screen (manual capture) and End buttons stopped working. The only way I found to correct this is to uninstall and reinstall the application. Am I doing something wrong, or is this a bug?

    More information on this issue: When I start recording in any mode, one screen is captured. No other screens are captured during execution on program functions, menu selection, navigation, etc. Once again I removed and re-installed the application. This time it made no difference.

  • I installed Canon Pixma MG5520, since, always get "canon quick menu has stopped working" how do I fi

    I installed Canon Pixma MG5520 on win 7, since, always get "canon quick menu has stopped working" how do I fix please?

    Hi thaluza,
    We can see if there are files in a folder called TWAIN_32 other than those related to the printer that may be causing a conflict with the Quick Menu. If there are, we can temporarily remove the files to see if this will resolve the issue.
    To move the non-Canon Twain files from the Twain_32 folder, please follow these steps:
    1. Go to Computer / My Computer and locate the C: drive, then double-click on it to open.
    2. Locate the WINDOWS folder, then double-click to open it.
    3. Locate the TWAIN_32 folder, then double-click to open it.
    4. Inside of the TWAIN_32 folder, you will see a folder for your printer as well as a WIATWAIN.DS file. If there are other files in that folder, you will want to move them to another location, preferably your Desktop by doing the following:
        4-1. Click on each of the other items in the folder other than the the WIATWAIN.DS file and the folder for your printer to select them. You will want to hold the the CTRL key on your keyboard while selecting each of the items until all of the items except for the two referenced above are selected. Please be sure to leave the WIATWAIN.DS file and folder related to your printer inside of the TWAIN_32 folder.
        4-2. With all of the items you want to move selected, please go to the EDIT menu and select the CUT option.
        4-3. Go to your Desktop (main window that comes up when you start Windows with all of the icons on it) and right-click your mouse in any blank area, then choose the PASTE option. The items you selected from the TWAIN_32 folder should appear on the Desktop.
    5. Try to launch the Quick Menu again.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My middle "Home" button stops working at least once a day! Can I get a replacment?

    I got my iPhone in October of 2010 and for the past 2 months witch it is now June 2011, my middle button stops working for up to 2 hours sometimes and it happens EVERYDAY! It's very annoying and also another problem whenever I recive or am calling someone it makes this horrible buzzing noise and it makes it hard to hear the person(s). I want a replacment because this is annoying and stressfull. Is there anyway I can get a new phone...? Please help!!!

    The basic warranty is for 90 days. If you purchased AppleCare for your phone at the time you bought the phone, that's good for 2 years.
    In either case, call your local Apple Store and make an appointment to take the phone in for a repair. If there's something wrong with it, they'll fix it. You won't pay anything if you purchased the AppleCare. If you're lucky to get an Apple Store employee who is in a good mood, you won't pay even if your phone is not covered by a current warranty.

  • My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    Hello Kimbo1991,
    It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

    Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
    Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
    I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

    I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

  • I dropped my Iphone in water and the on/off button stopped working, how do I fix it?

    I dropped my phone in some water and it was only in there for about two or three seconds. I grabbed it and dried it straight away and made sure to get in all of it, and it was fine, everything worked. But about an hour after the on/off button stopped working, so i have to use the home button to unlock it and have to wait for the screen to turn off after 1 minute of leaving it. I cant turn it off and dont know how to fix it. Will it go away on its own, do I have to send it off to get fixed? This literally happened like two hours ago, and my phone is a bit more than a year old. Can anyone help me?

    Make an app;ointment at the genius bar and take your credit card. You can get an out of warrnty replacement for an iPhone 4 for $149.
    If you had just done it, the advice would have been to shut it off and put it in a bowl or bag of uncooked rice or silica gel for a week.  Unfortunately, since it's been powered on for several hours, since then, it may have been permanently damaged. You can try the rice trick, but be prepared to pay for a replacement at some point down the road.

Maybe you are looking for

  • I'm being told I need to download Flash player even though I have installed the latest version

    I'm using a Mac with Mac OS X, Version 10.7.5, with Safari 6.0.2 as my browser. I haven't had any problems with Flash player until today. Now suddenly, when I try to view Flash content, it tells me I need to download/install the latest version of Fla

  • Payment Term Requirement Issue

    Hi, If i create the invoice today, i need to do the payment on either 15th or 30th of after 2 months. Example: Invoice Date - 15-10-2010.  But the payment due date should be either on 15th of December or 30th of December. How can i create this paymen

  • How to delete Yosemite and return to mavericks

    On my Mac Pro desktop I have downloaded the upgrade to Yosemite from Mavericks, now I have no mail and hundreds of pounds worth of software that won't work with this operating system, all my reading lists and links are gone from safari. How do I put

  • Splitting formula in transfer rules using sub string

    Hi Friends, I used function module in formula using posting date but again I need to split this to get appropriate answer using substring. Now I am getting result as 20084. here 4 is fiscal quater. But I need only 4.For that I have to use substring.

  • IPhoto won't load after Mountain Lion update

    Since upgrading to Mountain Lion, my iPhoto will not open. The error message says I need to update my library in Aperature. I've opened the Library in Aperature but I get the same message when trying to open iPhoto again. Is there a way to reinstall