Menu doesn't fit on screen

I have a menubar on my application, one of the menu items is a submenu listing about 15 options one of which can be selected (radio button). the menu is small enough overall to fit on the screen but when it shows up it only displays about half of it and the top half is cut off by the top of the screen. how do I get arouns this.

Perhaps its a better idea to place the options in a Dialog box and create an options entry in the menu that pops up the dialog. I think that might make a better interface, though i can't see how your prog is used of course

Similar Messages

Workspace doesn't fit the screen anymore...

Hello.
Since today (and Mac OS X's update I installed this morning, I guess), my Photoshop CS6 workspace doesn't fit the screen of my 12 inch Cintiq (connected to a 2014 Macbook Air). No matter what I do, it keeps it wrong.
Trying to set the photoshop window to the whole Cintiq screen with the "green" Mac OS corner button, this is what I get:
Hitting F won't do the trick, this is what it gets me:
I tried to clear the Photoshop prefs, without success. I checked for updates and found there was a Photoshop update I had not yet installed, and I did install it, to no success. Needless to say, this makes my copy of Photoshop most unusable, which is a really big problem for an illustrator like me. I really wish I can solve this as soon as possible.
Thanks.

Yeah, no results. Still the same.
If I take my main window and move it up by myself, it's just gonna stay there until the next click somewhere, then it gets back to this wrong placement,.

The latest version doesn't fit my screen properly

The latest version doesn't fit my screen properly. How can this be fixed?

troubleshooting QuickTime errors with After Effects

RF menu doesn't fit screen

Hi folks,
I'm observing a strange behavior. I use a PDA with a barcode scanner and display the standard SAP ITSMobile menu (lm00) in the Internet Explorer of that Windows CE device. I've set the presentation format to 16x20. The PDA has a QVGA display.
What happens:
1. Logon screen is displayed. (fits perfectly in height and width - no scroll bars)
2. I log in.
3. The RF menu is displayed. (doesn't fit in height and width by about 30% - scroll bar visible)
Even with only 3 menu points the logoff Button (F8) is displayed very low so you'll always have to scroll. Does this work as designed or do I have to configure something? I just can't believe that the standard SAP RF transactions can't fit a state of the art QVGA display without scrolling...
Any suggestions are highly welcome!!!
Edited by: Robert Gaertner on Apr 7, 2009 6:35 PM

Found an answer in this tread:
ITS Mobile screen size
Edited by: Robert Gaertner on Apr 9, 2009 3:35 PM

Game doesn't fit the screen, iPod menu sideways

I have a 4th generation iPod Nano. The problem here comes from the game Brain Challenge.
This is probably a very confusing and complicated explanation of the problem, so I've provided photos of the problem at the bottom of this post.
When I start Brain Challenge the game video is not aligned with the screen so that part of the game is cut off when I play. The game should be displayed on the screen horizontally (with the ipod held horizontally - as in Klondike), however my problem is that Brain Challenge is displayed with a vertical orientation (with the ipod held vertically), meaning the right-hand side of the Brain Challenge interface is cut off by the edge of the screen and there is a large black area at the bottom of the screen (see photo #1).
To make matters worse, when I exit Brain Challenge the orientation of all the ipod menus are askew as well (photo #2). With the ipod held vertically, the ipod menus are now displayed sideways, with anything at the "bottom" of the menu being cut off by the edge of the screen, and a large empty black space at the bottom of the screen. I have found that the only way to correct this and reorient the ipod menu display is to go to Cover View (even resetting the ipod does not resolve it). When I exit Cover View everything is back to normal.
While I have been able to fix the display of the ipod menus when this happens, the problem I described above reoccurs each time I attempt to play Brain Challenge. Maybe the game thinks I have a 3rd generation Nano?
I have uninstalled the game from my ipod and reinstalled it with no better luck. The only other software I have added to my ipod is Ms. Pac-man.
Thanks to anyone who can help.
Example Images -
Brain Challenge: http://img36.imageshack.us/img36/8311/27772938.jpg
Ipod Menu sideways: http://img37.imageshack.us/img37/4831/menuo.jpg

I would do a Restore in iTunes to erase the iPod and initialize its software. Then re-sync your iTunes library as desired, including adding that game. See if it plays better.
If not, and you don't have any similar problems when you play any other games (or at any other time when using the iPod), you should report the problem about that game through the iTunes Store. You can do so using iTunes by selecting the iTunes Store in the sidebar, then clicking on your iTunes Store user ID at the upper right corner. This will give you your account summary view. Click on +Purchase History+. From there, you can find the specific purchase that has this game and +Report a Problem+ to explain the issues. If desired, you can request a refund, because the game does not work as expected.
After doing the Restore, if you notice other similar issues (not just a problem in that game), you may want to have the iPod looked at under the one-year warranty.

Image doesn't fit on screen

At startup, right after desktop image, top menu and dock loads, monitor resolution is being reset so only part of the desktop image fits on the screen. Going to Display Preferences and switching resolution does nothing. Starting up in Safe Mode and hooking up a CRT monitor instead doesn't change anything either. Also tried to reset PRAM and trash com.apple.windoserver.plist
The problem first appeared while I was using computer. Screen resolution suddenly changed.
Apple Cinema 20" Mac OS X (10.4.9)

Hi
Screen resoultion suddenly changed. <</div>
This sounds like a monitor cable fault or a graphics card fault. Either one or the other or both are not now able to support the full range of resolutions they were able to support before the fault occured. To determine where the fault lies you could do one of two things. Borrow another monitor and try your mac on that and see if the follows the graphics card/mac or if you have a friend with a computer that you can try your monitor on to see if the fault follows the monitor.
HTH

Incoming text message doesn't fit monitor screen

All of a sudden my incoming emails are too wide to fit the monitor screen and I have to use the arrows at the bottom to read the right side. How can I correct this? Thanks
eMac Mac OS X (10.4.8)

Have you changed either the font size your e-mail program uses, or is the display resolution not at its maximum in Apple menu -> System Preferences -> Displays? If the latter is the case, increase the resolution, and maximize the window size so more of the text fits.
Conversely, if your friend just purchased a larger display, they might be creating e-mail at a higher resolution, thus ending their sentences at a much later point in their e-mail too, thus causing it to not wrap where it used to.

HELP!! PSE7 Downloader doesn't fit laptop screen

I've recently upgraded from pse4 to pse7 and have just found the 'advanced settings' button on the downloader. However, the window this opens is too big for my laptop screen and I can't access the 'get photos' button. I can't get the window to move like a windows window. Can anyone help?
Thanks
Adam
www.shortwayround.co.uk

Interesting, the Advanced Dialog window is 812 pixels high, larger than the 768 typical of a laptop (and the minimum required by Adobe for PSE). And PSE doesn’t let you make the window any smaller.
Here’s how to move the window around if the title bar isn’t visible: Click anywhere within the window. Then hold down Alt and Space at the same time. Release Alt-Space and type “m”. Now you can use the up/down/left/right arrow keys to move the window around. Left-click with the mouse when you have the window where you want it.
You can try this on other top-level windows first to see how it works.

Garage Band doesn't fit to screen

My GB is too large to fit to the screen (bottom goes below view, top goes above). You cannot shrink it through the bottom right of the screen. When you drag it to see the top the of the screen you cannot drag it back. You either have to hit the green + or window - zoom. Does anyone have answers or a similar problem to me?

Don't know if this is the same problem and solution or not, but check it out.
http://discussions.apple.com/thread.jspa?messageID=7773680&#7773680

Writing email: doesn't fit in screen

After updating to ios 4.0 on my 3GS I noticed that when I'm writing an email & I get to the end of a line the whole email shifts to the right for about 2 letters (which makes the first word of the email shift off screen to the left). The words don't all fit on the iphone screen by about 2 letters. The screen does not stay locked, it shifts to the right with the extra letters. This happens when composing a new email or replying to old emails. It does not happen with other writing programs I'm using in ios4 and it didn't happen in 3.0.
Anybody having this problem too?

Thanks a million!!! You guys are a clasas act!

After sharing movie to idvd, burning, it doesn't fit TV screen, why?

How do I get my movies (from imovie to idvd) to fit correctly for my TV either flat screen or regular old TV?

Adjust the settings on your TV/s.

My dashboard doesn't fit the screen when I plug in a second monitor...

How do I get it so that it fits the same when using a dual monitors as it does when using just my MacBook? (2008 macbook running Snow Leopard)

1950shady wrote:
apologies, first time using the forum
Easily done - wasn't meant to be critical, just that usually you're more likely to get the answer in the dedicated forum.
AC

Menu doesn't fit

ok so I built 16:9 a project in FCP destined for dvd. I exported a self contained movie and imported that into DVD Studio Pro.
in the simulator, everything looks fine, the menu letters are within the "title safe" area.
so I burned it to disk but the title letters are out of bounds using a projector set to "16:9 image". I also tried it on a 4:3 tv but that squished the people too tall and skinny.
why does it work on the computer but not in "real life"

darbypsnm
although the end dvd works, Im afraid whats happening is Im outputting a 4:3 project from fcp, then using anamorphic to stretch the pixels.
my camera, Panasonic dvx100b, does not shoot real 16:9 footage, only anamorphic.
therefore I think the computer is seeing 4:3.
the canvas window in fcp looks like 16:9 without a doubt but when I export to quicktime, quicktime conversion or compressor, there is no way to make it look like 16:9. the preview window in compressor shows a 4:3 image - squishing the people to be tall and thin.
only after importing to dvdSP can I change the settings to make it look like 16:9.
I can't get the preview in compressor to show a 16:9 version! --even though it says we are using the setting "dv/ntsc anamorphic"
maybe I could be getting a lesser quality image becuase Im telling dvdsp to stretch it?
how come I cant get a 16:9 image to carry all the way through?

Is it just me or my iTunes doesn't fit my screen, even after I maximized it???

As the question I mentioned, does anybody have this issue to on iTunes on Windows??? None of its previous version have this problem btw.

If your Windows taskbar is set to "use small icons", this may cause the problem.
Unselect "use small icons", and then use iTunes and it will be fine. Interestingly, if you then go back and enable "use small icons", iTunes will still be fine even after reboot.
Good luck!

Firefox 29 "Customize Page" doesn't fit on screen.

Can't see anything along the right side of the Customize Page. At least 20% of the page is missing. Tried to change zoom and font size.

'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode].''''' Is there still a problem?<BR>
<BR>While you are in safe mode; '''''Firefox Options > Advanced > General'''''.<BR>
Look for and turn off '''Use Hardware Acceleration'''.<BR>
Then restart.

Menu doesn't fit on screen

Similar Messages

Maybe you are looking for