Menu not Found Error

Hi Experts,
I working on an add on ,i have registered the ard of that add on . The problem is that when i try to connect ard it gives the error "Menu Not Found".Some time it works fine and it also works fine when i restart the sap.
So kindly Suggest me the proper solution
Thanks
Amit

Dear Amit,
I faced the same problem in 8.81 PL6.
Dear Gordon,
tou can try run add on, and the add on create sub folder, Log off and login to same company (not close the application), then run the add on again, then you will have the message.
nd.Q

Similar Messages

With 3.6.12, Help menu item "For Internet Explorer Users" results in a "Page Not Found" error. Is this a known bug? Is it being addressed?

Clicking the 3.6.12 Help menu item "For Internet Explorers" item results in a "Page Not Found" error.
The URL of the resultant page is https://support.mozilla.com/en-US/kb/Windows%20start%20page?as=u
Is this a known bug, if so, is it being addressed? If so, someone needs to work faster.
If it is not a known bug, someone needs to get right on it - you want people to switch to Firefox and then there is this bug -- not a good way to impress Internet Explorer users.

Hi Claudio Roca,
I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
Regards,
Hau Chee

File not found error (no error number or file identified)

Hi,
I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
Regards
Richard

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

Get file not found error when I try to sync

I get file not found error when I try to sync Iphone.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

USB flash memory: "application not found" error

When recently trying to use a USB flash memory stick I was getting an "f:\ application not found" error. I tried all kinds of fixes from Microsoft. Turns out it was caused by Lightroom.
Since the memory stick had photos on it, my computer's Autoplay was trying to launch Lightroom. Problem is, Lightroom is listed as "Lightroom 4.0 64" in the Autoplay menu. I have Lightroom 4.4. As far as I can tell, there's no way I can fix the incorrect "Lightroom 4.0 64" listing. The solution is to remove Lightroom from any Autoplay options.
This is the second such problem I've had with Lightroom. The previous problem was right clicking on a photo file and trying to use the "open with" menu. It worked fine when I had Lightroom 4.3. After updating to Lightroom 4.4, it didn't work. Another Lightroom user found a workaround, which was to rename the Lightroom 4.4 folder back to Lightroom 4.3.
These are both lazy Adobe oversights. You have to realize all the Windows functions that will be affected with an update and make sure they are updated as well. I spent half a day solving this latest USB flash memory error. Get your updating act together.

You don't mention your OS or which version of Outlook you're using.
For Windows, this may be helpful:
http://www.winhelponline.com/articles/236/1/Unable-to-open-PDF-attachments-from-Windows-Ma il.html
Noel

MENU NOT FOUND 66000-27

Hi All,
I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27.
I am using the add-on version of 1.0.0.1. And I have also the FULL license for Crystal Report Basic 2008 for SAP Bsuiness One of Business Object.
Please also note that the above error which I am getting if only in a particular company / database. When I am loading the add-on in any other database then everything is working fine and the Menu of Manage Crystal Report is working.
Please advise for a solution as how to get rid of it.
Regards,
Kawish

Hi Kawish
Please visit the following link:
Activate menus Gross Profit
Hope this helps!!
Regards
Sourashree

Menu not found

Dear experts,
I am still not able to find any solution for the error of ''MENU NOT FOUND 66000-27" in "Manage Crystal Report"
The above error which I am getting if only in a particular company / database.
Regards,
Paolo

I have had the same problem for over 6 hrs now. So I decided to step through the source code. This is my finding.
The Problem is coming from this line in public bool FillSourceData()
sModuleString = AppObject.Menus.Item(Rs["ModuleUID"].ToString().Trim()).String;
This is because the reports being referenced in the database have been moved or deleted.
The fix is to wrap the content of the while (Rs.Read()) // Not (Rs.EOF) in a try... catch
Like this
while (Rs.Read()) // Not (Rs.EOF)
try
It now works OK.
Edited by: Olajide Aregbesola on Mar 25, 2010 5:00 AM

MENU NOT FOUND [ 66000-27] in Manage Crystal Report

Hi All,
I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27.
Please note that earlier this menu used to open by which I used to add the reports but now for the last 4-5 days this menu is not opening.
Also would like to know in Account setup how to create ext table when the table already exist.
Regards,
Kawish

Hi,
I am still not able to find any solution for the error of ''MENU NOT FOUND [ 66000-27] in Manage Crystal Report''.
I am using the add-on version of 1.0.0.1. And I have also the FULL license for Crystal Report 2008 of Business Object.
Please also note that the above error which I am getting if only in a particular company / database. When I am loading the add-on in any other database then everything is working fine and the Menu of Manage Crystal Report is working.
Please advise for a solution as how to get rid of it.
Regards,
Kawish

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

HTTP 404- File not found error xMII 11.5 SR3 install on Win XP Prof

Hello Everyone,
I have tried installing xMII 11.5sr03 on Windows XP Professional 2002 sr2.
The installation of IIS5.1 along with scripts virtual directory was successful.
And so was the installation on xMII.
However when i open the SAP xMII Menu (http://localhost/Lighthammer/Menu.jsp )
or Security menu (http://localhost/LHSecurity/admin/). It shows the HTTP 404- File not found error.
IIS help and localhost homepage http://localhost/localstart.asp is working fine.
The License has also been copied to the Lighthammer license directory.
Can anybody tell me where/how to look for a solution ?
Warm Regards,
Amol

Hi Ryan,
Its a fresh install and as mentioned in the guide i started with sr01 ,sr02 and
sr03. Since these were the only 3 files available for download from service marketplace for xMII 11.5.
I don't think there is a base 11.5 install available after which i go about installing the sr01 ,02 and 03 respectively.
Please let me know if there is any and where to get it from...
Thanks for your suggestions.
Warm Regards,
Amol

"Page NOT FOUND ERROR" when i launching application through IE

Hi Siebel Guru,
We have installed Siebel CRM 8.1.1 on windows 2003.successfully. I am able to connect ecomuniction through shortcut from windows start menu. If I just type the URL in browser I getting issue with "Page NOT FOUND ERROR".
I just want to launch application through explorer without starting it from shortcut and session should not expire.
Am unable to launch siebel application through my local machine also.
My application server is up and running and am able to connect my webserver on localmachine.
pls do needfull.
Regards
Prabhat

Hi Goud,
thanks for co-ordiantion
Same issue page not found .
http://ssipl-srvr-35/ecommunications_enu/start.swe.
even local machine same issue page not found.
when i launching application trough webclint my application is opening.
i dont know wht the issue.
why my application is not running direct (IE).
because end User interests to access application their local machine.
pls help me out to solve this issue.
Regards
Prabhat

Getting 'Page Not Found' error while launching the Workbook

Hi,
When the user is trying to launch a particular workbook in Discoverer Viewer by clicking on the Workbook name in the List of Workbooks page of E-Business Suite, he is getting the 'Page Not Found' error.
Did anyone faced similar issue?
Please let me if anyone knows the cause and solution.
Thanks,
Lokesh.

Hi Michael,
Thanks for your response, Actually the user is getting this error in E-business Suite.
The user will do the following before getting this error.
1) Logs into the E-business Suite with appropriate login credentials.
2) User will see the HTML Page which will show all his Responsibilities.
3) User clicks on the 'XXXXX GL Discoverer Viewer' responsibility
4) The HTML Page gets refreshed and the user will see the menu 'Discoverer Viewer' on the right side of the HTML Page.
5).User clicks on the menu item 'Discoverer Viewer'
6).A new HTML page gets generated which will display all the Workbook names to which the user(Responsibility) has the access.
6).Now the user clicks on a specific Workbook name to launch the Workbook.
7).User gets the 'Page Not Found' error.
The user is getting this error only for one Workbook,other Workbooks are not causing any problem, the user is able to launch other Workbooks from the same page.
I believe that E-business Suite generates the HTML Page with all the Workbook names and wondering why only one workbook is giving error.
Thanks,
Lokesh.

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

Private Key Not Found Error in Ldaps

Hi,
I am facing "Private Key Not Found" Error in ldaps. The key and the SSL certificate is stored under the same location. The certificate is self signed certificate and in .pem format. When I am trying to install the certifcate through SUN ONE Console it throws the following error
"Either this certificate is for another server, or this certificate was not requested using this server".
can any one help me in this regard.
Regards
Senthil
Edited by: senlog80 on Dec 30, 2008 3:18 AM

Or even better, check the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=924320&_NLANG=E">924320</a>.
Symptom:
When you execute a query with virtual characteristics or key figures, the system issues the following error message:
Object FIELD I_S_DATA-<key figure> not found
Other terms
RSR00002, RSR_OLAP_BADI
Reason and Prerequisites
This problem is caused by a program error.
Solution
If the virtual characteristics or key figures are implemented using the enhancement RSR00002 (CMOD), implement the corrections.
If the virtual characteristics or key figures were created directly as implementations of the RSR_OLAP_BADI BAdI, compare the source code of the INITIALIZE method with the corresponding source code example. During the call of GET_FIELD_POSITIION_D, <L_S_SK>-VALUE_RETURNNM must be transferred instead of <L_S_SFK>-KYFNM.
Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch 08 or SAPKW70008) into your BI system. The Support Package is available when Note 0872280"SAPBINews BI 7.0 Support Package 08", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Assign pts if helpful.

I have a nidaq32.dll not found error. If i have already tried replacing the visa32.dll what else can i try?

I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
Gerry

Hello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll.

Menu not Found Error

Similar Messages

Maybe you are looking for