Merge the total line about header and item in the Hierarchical Seq ALV

Hello guys,
Now i used CL_SALV_HIERSEQ_TABLE to create a Hierarchical Sequential ALV. but there are two total lines, one is to calculate the numerical fields in the header(main) and another is calculate the numerical fields in the item(slave).
my requirement doesn't contain the calculation for header line, so the first line is unuseful and i want to merge these two line.
how i should do with it?
Any clues is appreciated.
Thanks a lot

could anyone help me? i am very urgent!

Similar Messages

How can we revise the pricing both at header and item level of sales order?

Dear All,
Now there's one issue of the pricing to me. i want to revise the pricing both at header and item level of sales order. but after i finished the cutomize and tested it, it's more different as i thought. i found that the pricing can revise at the one side only,for example, if i revise the pricing at item level and it's grey and can't be revised at the header. on the other hand, it's the same result what's happened at item.
So, in my opinion, we can't revise the pricing both at header and item, right? if not, please give me more advices and teach me how to solve the problem. thanks a lot.

Dear Lakshmipathi,
Thanks a lot for your kindly and useful answer for me and I learn more for the pricing technology.
I didn't notice the way that you reminded ago therefore I also saw the button at the condition tab. And your suggestion makes me know more.
And I had tested the way that you said, I met with a question. Below is my opinion for my testing.
I had created one SO and the pricing was $10, then I revised the pricing from 10 to 15 by VK11. It can't be updated automatically at SO and I must update it manually by clicking the "Update" button. This is OK for my testing, but I have another question to disturb you for the use of "Active" button. When I click the button and nothing is responsed, it's quite different what you said. So, please give more detail for the Active button. Thanks a lot.

In LSMW using BAPI Scenario, how to assign the same file to HEADER and ITEM

Hi,
i got a problem when we are in ASSIGN FILES step how to assign the same file to both HEADER and ITEM Structures?

Hi,
When defining the file in specify files step check the option 'Data for Multiple Source Structures'.
Hope it helps.
Thanks,
Mahesh

Impossible to bring up the info pane about a todo item outside the current view

Can anyone reproduce this?
1) Set iCal to hide todo items whose deadlines are outside the current view.
2) Create a todo item whose deadline is outside the current view.
3) Search for the todo item.
4) In the search results, double-click on the todo item.
Expected Results:
The same thing happens as with events: the view switches to the week containing the event, and its info pane is displayed.
Actual Results:
Nothing happens.

Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route.

I've lost the majority of the connections between my projects and items in the library (showing up as "missing files"). I've moved nothing. How can I reconnect? The items show up as missing in the library as well as in the "movie".

I am using the version 10.0.9 which might have been an automatic upgrade from my original version.
The majority of my connections between library items has been lost. The items show up as missing files both in the library and when I run my project. How can I re-estabish these connections?

Did you try using the relink function?

Header and Item data in a module pool

Hi Friends,
I designed a screen in that i have header data and item data.
Here in my screen header i have vendor number,Vendor name,
bank Name, Branch, LC value and Due date fields.
and for item details i have to take table control.In the item details i have the fields Sl No, PO Number and Po Value.
and Two push buttons i need to put.SAVE and CANCEL.
When i click on SAVE all my screen details should be saved in a ZTABLE and should generate a LCDOCUMENT-Number from the system.
So my question is shell i take the two tables for header and item data or one is enough and if i take two tables(one is header and one is item data) how i write the logic to store into the ztables.
How can i proceed.Plz provide me with ur inputs
Thanks and Regards.

Hi!
you have to take one table.....in which u have to move the header and item data into that b'coz according to the header data the items are to be displayed.......
select the data for which ever tables they came and then take a final table in which include all the fields of header and item .loop on all the tables from which data u have taken and inside it move the data of those fields into the fields of the final table.
In the ALV u need to call the function module to display the ALV with that final table in which ur all data is there and prepare a field catalog of those fields you want to display in the item list.
for example a sample code is there...
types:
begin of type_s_vbak,
    vkorg type vbak-vkorg,             " Sales Organization
    aufnr type vbak-aufnr,             " Sales Order Number
    auart type vbak-auart,             " Sales Order Type
    kunnr type vbak-kunnr,             " Customer Number
    vbeln type vbak-vbeln,             " Sales Document
    knumv type vbak-knumv,             " Number of Document Condition
end of type_s_vbak.                  " BEGIN OF TYPE_S_VBAK
types:
begin of type_s_konv,
    kwert type konv-kwert,             " Condition Value
    kbetr type konv-kbetr,             " Rate (Condition Amount)
    knumv type konv-knumv,             " Number of Document Condition
    kschl type konv-kschl,             " Condition Type
end of type_s_konv.                  " BEGIN OF TYPE_S_KONV
types:
begin of type_s_material,
    kunnr      type vbak-kunnr,          " Customer Number
    matnr      type vbap-matnr,          " Material Number
    arktx       type vbap-arktx,          " Material Description
    steuc       type marc-steuc,          " Fiscal Classification
    kwmeng   type vbap-kwmeng,         " Quantity
    knumv      type vbak-knumv,          " Number of Document Condition
    vbeln        type vbak-vbeln,          " Document Number
    kwert       type konv-kwert,          " Condition Value
    total         type p length 14 decimals 2,
                                       " Total
    ipitype type p length 9 decimals 3,
                                       " IPI Type
    ipivalue type konv-kwert,          " IPI Value
end of type_s_material.              " BEGIN OF TYPE_S_MATERIAL
data:
fs_vbak type type_s_vbak.
data:
fs_mati type type_s_material.
data:
fs_konv type type_s_konv.
data:
   t_vbak like
standard table
       of fs_vbak.
data:
   t_konv like
standard table
       of fs_konv.
data:
   t_mati like
standard table
       of fs_mati.
loop at t_konv into fs_konv where kschl eq 'ZPNF'.
    move fs_konv-kwert to fs_mati-kwert.
    modify t_mati from fs_mati
    transporting kwert
    where knumv eq fs_konv-knumv.
endloop.                             " LOOP AT T_KONV INTO FS_KONV
* Modifying Total Field of Material Table.
loop at t_mati into fs_mati.
    w_total = fs_mati-kwmeng * fs_mati-kwert.
    move w_total to fs_mati-total.
    modify t_mati from fs_mati
    index sy-tabix
    transporting total.
    clear w_total.
endloop.                             " LOOP AT T_KONV INTO FS_KONV
* Modifying IPI-Type Field of Material Table.
loop at t_konv into fs_konv where kschl eq 'IPI3'.
    w_total = fs_konv-kbetr div 10.
    move w_total to fs_mati-ipitype.
    modify t_mati from fs_mati
    transporting ipitype
    where knumv eq fs_konv-knumv.
    clear w_total.
endloop.                             " LOOP AT T_KONV INTO FS_KONV
* Modifying IPI-Value Field of Material Table.
loop at t_konv into fs_konv where kschl eq 'IPI3'.
    move fs_konv-kwert to fs_mati-ipivalue.
    modify t_mati from fs_mati
    transporting ipivalue
    where knumv eq fs_konv-knumv.
endloop.                             " LOOP AT T_KONV INTO FS_KONV
and then fill the fieldcatalog and display the ALV
Edited by: Richa Tripathi on Apr 15, 2009 3:28 PM

Header and item details

Hi all,
How to link Header and Item details
Ranjith

Hi,
The Line item table always have the header tables key as one of the key field. so u can use it.
for eg : VBAK-vbeln and VBAP-vbeln
Vbeln is the link between sales header and item table.
Hope this helps.

BAPI_SALESORDER_CREATEFROMDAT2, Header and Item Level Ship-to

I have a situation where I want to have different header and item level ship-to accounts on a sales order. When I use the BAPI_SALESORDER_CREATEFROMDAT2 to create the order by passing the Ship-to for header and Item in order_partners table, the header ship-to is not updated.
This works fine if the header and item level ship-to are same.
Any ideas.

Hi Amit,
put a breakpoint at the BAPI and check your PARTNERS table
e.g. in the case, i am using iterms partner for line 10 & 20 that is different to the header table (000000)
         PARTN_ROLE PARTN_NUMB ITM_NUMBER TITLE           NAME
    1     AG        |EDICUS         |000000    |               |                         <
    2     WE        |DODGE         |000000    |               |                         <
    3     WE        |EDICUS         |000010    |               |                         <
    4     WE        |RWCUS         |000020    |               |                         <
if your table is not like this , it won't work
otherwise, post the relevant code and we can check
kind regards
Paul Quinn

Check box in header and item

Hi,
     I have a small problem regarding the checkboxes in the hierarchical Display.The challenge is i am unable to get the checkboxes for both header and item details in the hierarchy display.
                      Either header or item is getting the checkbox not both. Also, if a header checkbox is checked all the items corresponding to it should get checked automatically.
                    So please let me know the solution to this mystery.

Hi,
1. If you want to calculate tax in FB50 , you have to select teh Calculate tax indicator in the header & you have to give Tax code in teh respective line .
Even if you give tax code in the line item without tick the Calculate Tax indicator in the header system won't calculate tax.
2.Tax codes are created under teh TAX procedure.Thisd tax procedure is assgined to country.
So the tax codes you are creating are country specific.
chandra

LIS header and ITEM ds

Could you guys please help understand how i can retreive LIS header and ITEM level DS? what is that contains and how i can use that inforamation in BW?
do i need to have diferrent target for Both DS?
any details about this will be apreaciated....

hi,
hope u r using the LO extractions.
for loading data to the BW for LO header and item for any applications, hope u can use different DSO/ODS at the first level and can combine the data in the next level with cube. if you do this type then memory is saved in the second level but report performance will be low.
in the second lvele also if u use two cube to store data and using multiprovider combine both the cubes to achieve effective and effiecient reports with good performance.
Ramesh

PO text(Header and Item) OMQ6 and CG3Y

Hi All
We are running Tcode OMQ6 and Then CG3Y to get the text present in header and item level for set of POs. now i have done this for almost 1000 POs out of which for 20-30 POs syetem is not giving correct result.
actually for these POs text is present at item level but OMQ6 is not transferring this to loacl file or we can say it is not considering these PO.
I am wondering what can be the possible reason for this, if anybody have worked on this and got similar issue the appreciate your fast reponse.
Regards
Yogesh

Hi Yogesh,
this is a long shot, but could it be that the ones that are being missed have been manually entered or changed and the others have been taken from the material or info record? (or vice versa)
I am not sure which texts you are using, so sorry if this is not relevant.
remember that when you set up texts to be copied from the material master or info record there are flags that indicate if the text is copied into the PO or simply referenced from the mastr record (in which case you SEE it on the PO but it is actually still stored on the material master or info record).
As I say, just a long shot, but nothing else springs to mind.
Steve B

Checkbox in header and item level records.

Hello Freinds,
I have a requirment in which I need to display checkboxes in front of header as well as item level records. I am trying to make a copy of standard transaction VL37. This transaction uses the REUSE_ALV_HIERSEQ_LIST_DISPLAY for displaying header and item level data. I debugged and found that in the alv layout there is a field with name box name. If we pass the name of header internal table to that field then we can get checkbox in front of header level records and if we pass item level internal table name then it shows the checkbox in front of item level records.
Can anyone provide some possibility of adding checkbox for both header and item level records while using the same ALV FM.

Hello Harsh,
I am also kind of facing the same issue. I have used the FM REUSE_ALV_HIERSEQ_LIST_DISPLAY for ALV display. And I need to add checkbox at item level.
I have tried to add checkbox through field catalog. Following is the code I'm writing.
l_wa_fieldcat-fieldname = l_c_flag.
l_wa_fieldcat-tabname   = l_c_item.
l_wa_fieldcat-checkbox = abap_true.
*l_wa_fieldcat-edit_mask = abap_f.
l_wa_fieldcat-edit      = abap_true.
l_wa_fieldcat-key       = abap_true.
l_wa_fieldcat-seltext_m = l_c_flag.
APPEND l_wa_fieldcat to em_it_fieldcat.
But in this case the checkbox appears in disabled form.
Can you please help? Could you be a bit elaborate on your answer i.e. the code snippet? Many thanks.
Regards,
Debapriya

How to count the total lines of the file (including the file header)

Hi all,
I am working with Idoc to file scenario(FCC).
I need to map one of the field with a recound count ie.., count of the total lines of the file (including the file header).
Eg:Record Count-- mapping area:Total number of records in the file including file header The total line of the file (including the file header).
Can i get a help on this.
Thanks and Regards,
Manoj

Hi !
If there is a tag of your IDOC that occurs the same quantity of times as file lines you have to create in your target file, you could make a Java user defined function in graphical mapping that "caches the entire queue" (use the corresponding option button), that receives as input that field of the IDOC, and returns the "lenght" (.length property value) of that input parameter (it is an array) as output..that should be the file line quantity..you may also add 1 to that count, for the header.
Hope it helps.
Regards,
Matias.

How to find the header and item level status of a CRM contract ?

Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
Pl.reward points.......

How to upload the Header and Item texts

Hi ,
I need to upload the Header and Item texts , what is the process to upload.................................
Regards,
Raghunath.S

hi,
see the sample code.
report ZVENDOR_BANK
       no standard page heading line-size 255.
*-----tables declaration
tables:lfa1,lfbk,t100.
*-----data declaration
data:begin of it_dummy occurs 0,
       dummy(100) type c,
     end of it_dummy.
data:begin of it_lfa1 occurs 0,
       lifnr like lfa1-lifnr,
       ktokk like lfa1-lifnr,
       name1 like lfa1-name1,
       sortl like lfa1-sortl,
       land1 like lfa1-land1,
     end of it_lfa1,
     begin of it_lfbk occurs 0,
       lifnr like lfbk-lifnr,
       banks like lfbk-banks,
       bankl like lfbk-bankl,
       bankn like lfbk-bankn,
       koinh like lfbk-koinh,
     end of it_lfbk.
data:bdcdata like bdcdata occurs 0 with header line.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
FILENAME = 'C:\Documents and Settings\Rvelagapudi\Desktop\vendor.txt'
     FILETYPE                      = 'ASC'
     HAS_FIELD_SEPARATOR           = '#'
    TABLES
      DATA_TAB                      = it_dummy
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17.
loop at it_dummy.
    if it_dummy-dummy+0(1) = 'H'.
      it_lfa1-lifnr = it_dummy-dummy+1(4).
      it_lfa1-ktokk = it_dummy-dummy+5(4).
      it_lfa1-name1 = it_dummy-dummy+9(7).
      it_lfa1-sortl = it_dummy-dummy+16(2).
      it_lfa1-land1 = it_dummy-dummy+18(2).
      append it_lfa1.
    else.
      it_lfbk-lifnr = it_dummy-dummy+1(4).
      it_lfbk-banks = it_dummy-dummy+5(2).
      it_lfbk-bankl = it_dummy-dummy+7(8).
      it_lfbk-bankn = it_dummy-dummy+15(8).
      it_lfbk-koinh = it_dummy-dummy+23(4).
      append it_lfbk.
    endif.
endloop.
loop at it_lfa1.
    refresh bdcdata.
    perform bdc_dynpro      using 'SAPMF02K' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-LIFNR'
                                  it_lfa1-lifnr.
    perform bdc_field       using 'RF02K-KTOKK'
                                  it_lfa1-ktokk.
    perform bdc_dynpro      using 'SAPMF02K' '0110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-LAND1'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFA1-NAME1'
                                  it_lfa1-name1.
    perform bdc_field       using 'LFA1-SORTL'
                                  it_lfa1-sortl.
    perform bdc_field       using 'LFA1-LAND1'
                                  it_lfa1-land1.
    perform bdc_dynpro      using 'SAPMF02K' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-KOINH(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    data:FNAM(20) TYPE C,
         IDX TYPE C.
    move 1 to idx.
    LOOP AT IT_lfbk WHERE LIFNR = IT_lfa1-LIFNR.
      CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
      perform bdc_field       using FNAM
                                    it_lfbk-banks.
      CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
      perform bdc_field       using FNAM
                                    it_lfbk-bankl.
      CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
      perform bdc_field       using FNAM
                                    it_lfbk-bankn.
      CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
      perform bdc_field       using FNAM
                                    it_lfbk-koinh.
      IDX = IDX + 1.
    endloop.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    call transaction 'XK01' using bdcdata mode 'A'.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD

Merge the total line about header and item in the Hierarchical Seq ALV

Similar Messages

Maybe you are looking for