Message and no sounds - anyone with the same problem?
Hi,
since a few days I have always the same message (usually after I switched on the iPhone or after the iPhone was in the docking station and I took it out of the docking station):
"This accessory is not made to work with iPhone. Would you like to turn into airplane modus to reduce audio interference? You would not be able to make or receive calls."
After I pushed the button "NO" all the sounds are gone and I'm not able to hear iPod or YouTube without headphones. And people can't hear me very good, when I'm talking to them.
During the day the iPhone suddenly turns on, then I will get the above-mentioned message, I have to choose between yes or no and then the iPhone turns off.
I don't know what to do and why I have this message since a few days. I did a reset with iTunes several times now, but I have still the same problem.
Thanks for your help!
Katrin
Sounds like either the 30pin connector at bottom (where you plug in) is either failing (has an issue of sorts) or could just be dirty. Clean it up a bit (remove any lint) and see if it continues. If still an issue, make Appt at AppleStore or call 1-800-MY-IPHONE to have it fixed.
Similar Messages
-
I have recently purchased an Iphone 4s white 16GB. When camera is used with a flash the picture is white and hazzy. Anyone with the same problem?
Yep. Exchanged for black and that solved it. Too much light leaks through the glass on the white phone.
-
I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.
Disable all Firewalls & Anti-Virus software...try again.
-
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
-
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
-
I have a Matrox DVI docking Station, it slows my mac, anyone with the same problem
I bought a matrox DS1/DVI thunderbolt docking station.
It slowed my mac.
Anyone with the same problem?
I' m thinking on buyong the Belkin docking station, but I don't want to have the same problems as with the matrox one, any comments on this?
I apreciate your responceDisable all Firewalls & Anti-Virus software...try again.
-
Anyone with the same problem? My macbook pro is freezing on start up and I get the follin
My macbook pro is freezing on startup lately! It is wierd because I think the computer is still working, I can turn the volume up and down, and change the light in the keyboard and so on... But it still doesnt work.. I took a photo with my iphone? My macbook is kindda old I think it is from 2007. 2,4 ghz, Intel Core 2 Duo, 2gb mhz DDR2 SDRAM
I have installed version 10.6.8 on it..
Hope someone can help!Did you ever figure this out? I'm having the same problem now... I have a 2008 macbook pro, running mountain lino and it's been doing this.. I tried booking in safe mode and got the same result. Single-user mode didn't even run, and it just kept starting and shutting down without the screen turning on. Really weird.
Anyways, if you found a solution I'd appreciate it if you could let me know. Thanks -
Every time after shutting down my 24" iMac, it will end up with a corrupted HD which cannot be fixed by disk utility and require to reformat the HD and restore.
I noticed the Mac OS journal format will turn into no journal. Does anybody have he same problem?I have to ask; Are you using the Shut Down... menu item in the "apple" menu to shut down? Does it shut down normally when you do?
-
HT4097 This article did not help me I tried it and tried it and i'm stuck with the same problem
I am stuck in recovery mode for some wierd reason and i don't know what started it I don't know how to get out. Its an Ipad 1 64 gig with att. Just bought 2 new ipad mini's and apple tv becuase i had been impressed this issue is insane I can't even get it to get out of restore mode I've downloaded the same 726 m file over 50 times please help. Frustrated and disenfranchilsed about the whole deal.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Now I can''t use or access the bookmarks !
How can I go back to the older version that worked ok, except for the theme issues? I've consistently had issues with the themes, I can't get rid of the one I can't see through and have to uninstall it every time i open Firefox. I need a solution or I'll have to delete it for good and go back to Safari!Might it be that the bookmarks toolbar is hidden.
Please see https://support.mozilla.com/en-US/kb/Bookmarks%20Toolbar#w_show-or-hide-the-bookmarks-toolbar for how to make it visible again. -
Since I used ios my iphone now would not sync. So the songs from my computer would not transfer to my iphone, I kept getting " download 10.6.3 version " but this app is impossible to download. Please help... Any suggestions.
You don't provide much info on which version of iOS you started with, what iOS you updated to and what version of iTunes is on your computer. Be nice to know also if you are using a Mac or a pc to sync.
But I'll make a guess that you have a Mac and it has an older version of OSX on it. I'll also guess that you updated to iOS 6.1.3 and now find that iTunes on your Mac will not recognize your iPhone.
iOS 6.1.3 requires iTunes 10.7 or later.
iTunes 10.7 and later ( iTunes 11.0.1 is the cur recent version of iTunes) requires Mac OSX 10.6.8 (Snow Leopard) or later. The latest version of OSX is 10.8.3.
If this is the case for you the only way you can sync with your computer is to upgrade your OSX to at least 10.6.8 and install iTunes 11.
Not all macs can update to OSX 10.6.8. -
Since the last update, when my iMac goes to sleep mode it seems that the mouse or the keyboard can wake it up. I have to do a "hard reset" everytime. Anyone has this type a problem?
Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
Disconnect all wired peripherals except those needed to boot, if any. Be sure to disconnect all USB hubs. If you use a keyboard or mouse plugged into a hub, plug the devices directly into a built-in USB port and remove the hub. Test.
Step 4
If you have more than one user account, you must be logged in as an administrator for this step.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for Diagnostic and Usage Messages. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. In the search box in the window's toolbar, enter "powerd" (without the quotes.) Select the last few messages that appear, if any, and copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). -
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?
What fixed it for me:
On your computer, open iTunes > My iPhone (or whatever name you gave your iPhone) > "Music" page
Uncheck "Sync Music"
Click "Sync" button (bottom right)
Let it run and finish
Uncheck the box for every song, playlist, etc.
Click "Sync" button (bottom right) (This step may be unnecessary, but I did it and got the result I wanted.)
Let it run and finish
Check the boxes for the music you want on your iPhone
Click "Sync" button (bottom right)
Let it run and finish
See if that doesn't work for you. I tried a lot of things that did nothing, but this seems to have fixed it, and quickly.
Maybe you are looking for
-
My EBS is too slow on windows 7
My ebs is too slow when i use it on windows 7 but on older version on windows is working fine. Could somebody know what is the issue or how can we solve it? Thanks
-
Configuration problem, error: 1
I installed a PS CS6 trial on my computer but get an error: 1 message. I am pretty sure the problem is the way my computer is set up: I am running Windows 7 64-bit on a SSD, C drive. Default location of program files is changed to a separate hard dri
-
Error RSMPTEXTS~:Duplicate record dur durin EHP5 in phase SHADOW_IMPORT_INC
Hi expert, i find this error during an EHP5 upgrade in phase shadow_import_inc: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SHADOW IMPORT ERRORS and RETURN CODE in SAPK-701DOINSAPBASIS.ERD ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
Interleave smart and "dumb" playlists in iTunes window
Under the "PLAYLISTS" heading in my iTunes window, all the smart playlists are listed first, with the regular, "dumb" playlists at the bottom. That's different from the default listing on my iPod, where all playlists are sorted by name regardless of
-
Minimizing & Expanding LR3.5 on MAC Lion
I am having a weird problem... I am using LR 3.5 on the MAX OSX Lion. This problem has been going on for some time, so I am pretty sure it predates 3.5 and lion. If I minimize LR to the dock to do something else, then go back to the dock t