Message before friendrequest

hi everyone, i've send 2 messages to someone who whas not one of my contacts on skype,didnt knew he couldnt read them. now he send me a friendrequest. Now my question is:If i accept him, can he then read those messages, wish are still on our chatbox...?

Hey, vdvd84, and welcome to the Skype Community!
Some users have chosen settings that allow them to receive messages from anyone. Since that person could read your message while you haven't exchanged contact details with them, that means they have chosen the setting. The only other option is to only receive messages from those on their contact list. That would mean the other party couldn't have received your message. That being said, if you exchange contact details, then all that's left to stop your messages from being received by the recipient is to be offline, without an Internet connection, or blocked.
In your case, however, those messages you've sent previously are left in the void. In other words, your recipient isn't going to receive them. Resend them again if it's imperative that they see it.
If you have any further questions, concerns, or just want to discuss anything Skype, drop us another line!

Similar Messages

I get a message "before viewing pdf documents i must launch adobe reader and accept end user licence

I get a message "before viewing documents in this browser you must launch adobe reader and accept the end user licence agreement then quit and relaunch the browser". How do I do this?

Just launch Adobe Reader. Assuming you are on a Mac, all apps are launched from Applications.

How to send a warning message before closing soft via X of the title bar

With labview 8.2:
I would like to send a warning message before closing my soft when the user press the "X" of the title bar. Is it possible to do that without a Windows dll?
Thanks a lot,
Daniel.

Gerd,
I think a filter event for 'Panel close?' is more appropriate because you have the possibility to cancel the event or continue the event.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Edit XML payload of messages before restart

Is there a way to edit the payload of a message before to restart it?
I allway get the following message: "you can only edit header/body parts"
Thanks,
Laurent

No. But you can correct your mapping program (if this is at fault) and then when you restart the message the updated mapping program is used.
If the problem is actually that the received data are incorrect then it is the responsibility of the sending application to resend the correct data.
Regards,
Thorsten

Why won't siri read back my messages before asking me to send?

Why won't siri read back my messages before asking me to send?

go to settings>general>siri >toggle it off and then on
then try
if problem continues
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. DONT CONNECT YOUR DEVICE TO A COMPUTER.

How to display a confirmation message before deletion

Hi,
I have an application and I want to display a confirmation message before people delete a record.
The button on page 42 is number 90 "Supprimer cette fiche". It is a Submit as "DELETE_ALL". I have seen that the delete buttons are redirections to the url javascript:confirmDelete(htmldb_delete_message,'DELETE');, but I cannot use this as my button is not a redirection, but a submit.
http://apex.oracle.com/pls/otn/f?p=4550
Workaspace : ESPACE2008
User : guest
password : acdc2009
Name of application is Activites
Thank you for your kind answers.
Christian

Hi Christian.
You can use the same logic for your own processing logic.
the syntax is...
javascript:confirmDelete(htmldb_delete_message,'YOUR_PROCESS_NAME');Replace 'YOUR_PROCESS_NAME' with the name of your page process that handles the bulk delete. Don't for get the single-quotes either side of your process name.
Hope this helps.
Simon

Error message: Before proceeding you must first launch Adobe Acrobat.....

When I try to open a PDF on a Web page I get the following message:
"Before proceeding you must fist launch Adobe Acrobat and accept the End User License Agreement"
I Installed the Adobe Acrobat XI pro an my MAC and after registration, the programm runns perfect. How can I solve the above mentioned problem?

Open it again and see if you get a request to accept the EULA. If not, then go to the help menu and run repair, followed by updates.

Getting Accessiblity Error Message before Recording Software Simulation...

In Captivate 7, I go to start a brand new software simulation (chrome screen) in OSX and I get the following error message:
Before recording application applications, select 'Enable Access for Assistive devices' in 'System Preferences' > 'Accessibility'.
The pics below show the red screen capture box and the error I get when I try to capture when trying to capture the screen. Also included is a pic showing accessibility is enabled.
I have no idea where this is coming from.

...and here's the answer:
http://captivatecrazy.blogspot.com/2014/01/record-new-software-simulation-in-adobe.html

Siri is not what it claims so far. poor recognition anyone else not happy. previous question on why siri wants to send a message before i get a chance to review siri type o's

Siri wants to send my messages before i get a chance to review it can i slow siri down before she sends my message?

First if you were talking to a Uverse rep about transferring ownership of account and then inquired about phone service the only thing that could be offered would be Uverse VoIP. Calling 1-800-288-2020 is also calling the Uverse division of AT&T, again VoIP. POTS is not Uverse, a separate department with a separate bill, and no bundle discount for combined services. The install would be handled by the outside lineman, not a Uverse tech. If chose the self install the lineman would get dial tone to the NID, you would be responsible for wiring NID to house wiring as Uverse Max Plus 18 or Max Turbo 24 should be a dedicated home run from NID to RG not touching the house wiring. A full tech install would be billable as is a tech assist service call to connect wiring. Lastly AT&T as stated desire to be all IP by 2020, expect POTS and DSL CO based products to be discontinued in near future. Therefore you may have a better chance at a POTS line by going 3rd party provider. And yes if VOIP is active expect to pay for service till such time as CANCEL VOIP service or number is transferred. These are my thoughts and do not represent any official response.

Deleting Mail Messages Before They Open

Is there a way to delete an email message BEFORE it opens (to avoid potential viruses)?

This help doc http://support.apple.com/kb/ta21164?viewlocale=en_us explains that there is a difference between looking at a message in the preview pane and actually opening it. If you're only using the preview pane and delete it, it was never actually opened.

Mail keeps sending messages before I'm ready

My desktop Mac (Intel) keeps sending my messages before I'm done with my mesage

This smells like a permissions issue, and it cannot be fixed repairing permission with Disk Utility.
Well, I looked up the MessageUidsAlreadyDownloaded
files to see if they were being written to and saved
(updated). Basically, I was just checking the last
saved dates on them.
And the result of looking at them was?
And there were only 3 POP folders
where these MessageUID files were in.
These files are what Mail uses to keep track of which files have already been downloaded. There should be either one or two of them in each POP account. What you're saying indicates clearly that there is a problem with these files.
Does the multiple downloads problem happen with all accounts or only with the one that lacks the MessageUidsAlreadyDownloaded file? -- sorry if you already knew this, but just to be sure, to know which account a "POP-" folder is associated with, just look at the folder name. It's formed by appending the account username and the incoming mail server to the account type (POP).
In the Finder, select the account folder that lacks a MessageUidsAlreadyDownloaded file, and choose File > Get Info (⌘I). Under Ownership & Permissions, are you granted "Read & Write" access. Expand Details. Are you listed as the owner of this folder?
Note: There are several bugs in the Finder that make troubleshooting this kind of problems harder that it should be, and you may end up reading wrong information and/or incorrectly "fixing" non-existent problems if you play too much with it. If your problem ends up being a permissions issue, are you willing to troubleshoot it using the CLI in Terminal?

How do I delete a voice mail message before listening to the message ?

How do I delete a voice mail message before listening to the message ?

Hi ,
I see what you mean.This cannot be deleted without calling the voicemail.
You can remove the voicemail if you no longer want this.
Or ring the voicemail from a different number and delete it this way.
Thanks.

I have problem with my contacts. I can't send message if the contact didn't send me a message before. How can I add new address?

i have problem with my contacts. I can't send message if the contact didn't send me a message before. How can I add new address?

Hi tizac,
You will want to add them to your Contacts.
There's a "+" button at the bottom of the contact list on the left to add a contact.
If you need to add the email address or phone number to an existing contact, there's an Edit button at the bottom of the contact info (on the right).
Once you have the contact email address or phone number you want to message to, scroll all the way down to the bottom of their information and there are options to:
Send Message               FaceTime
Share Contact             Add to Favorites
Of course choose "Send Message" to send an iMessage to them and you will start a new chat. You will be given the options of how to contact them, via phone number (if they are on an iPhone) or email (if they are on an iPod touch or iPad).   They do need to be signed up for iMessage or it won't allow you to send.
ivan

Force to check all the message before post in MIGO transaction

Hi Expert,
We have a requirement to display all the message before post this document with clicking the "Check" button. Actually our requirement is very simple, that is system calls "Check" function automatically after click the "Post" button.
In some case, some operators donot want to click "Check", before they click "Post" button. So they will miss some important information.
Thanks

Hi Paul,
Thank you replied, I think that will be one only solution after i debuged it.
Thanks

Can we display a message before selection screen

hi experts,
               I need to give a message to user's to give information abt the selection screen .
like select values between 1000 to 2000 only.
date must be todays date.
so how i can display a message before the selection screen is displayed

try like this it may be useful for you.
load-of-program.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
   TITEL              = 'Selection screen info'
    TEXTLINE1          = 'Material no should be between 1000 and 2000'
   TEXTLINE2          = 'Plant should be 1000'
*   START_COLUMN       = 25
*   START_ROW          = 6
start-of-selection.
if you want some more fields to pass then search popup* fn module in se37 which can be useful 4 you.
regards
shiba dutta

Message before friendrequest

Similar Messages

Maybe you are looking for