Message "Carry out modification comparison... No Change possible" and SPAU

Hi
I'm trying to manually implement SAP note 1400194 and 1428579 both need to amend the Include RPCP45GD.
Every time you try and open the Include in edit mode  to apply the changes manually you get the message
"Carry out modification comparison for REPS RPCP45GD first. No Change possible"
So I run SPAU... but the object  RPCP45GD does not exist in SPAU so I can't do a modification comparison on something that's not there !
Any ideas how I should proceed ?
cheers Hugh

Modification assistant is on, otherwise SPAU would not work...
Activated object but had no effect...
However I did find a note in SPAU that was unreleased that related to another note that seemed to change the include I am looking at. This may be the reason why it's locked.
SAP's modification assistant is about as useful as a hole in  the head !

Similar Messages

  • Modification Comparison - No Changes Possible

    Hi,
    I have a program which has been modified (SAPLRSM1) with the implementation of a SAP note 987566.  This has made a change which has appended two parameters to an include, which is giving a syntax error.
    SAP Note 990672 looks to fix the problem by removing one of the parameters, but I cannot implement this note as it seems to be obsolete, and has the status Implementation Status: Cannot be implemented .
    I know exactly where the error is in the code and in the short term want to comment out the parameter which is giving me an issue, but when I go to change the include, I get the message:
    Carry out modification comparison for CPUB CL_RSCRT_RDA_TOOLS first. No changes possible
    I have ran the modification comparison, but I do not get any further options.
    Could somebody tell me where I am going worng and whether it is possible for me to make this change in this way.
    We have SAP helping with some work which we are doing on our new 2004's box, but I need to get this part working urgently.
    Thanks
    DJL

    Dear Michael,
    Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
    As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
    Let us know the status.
    Thank You.
    Kind Regards,
    Rafikul Hussain

  • Carry out modification comparison for J_1BV45A first. No changes possible

    Hi, every expert,
    when I change the object J_1BV45A,  It appears the error as below:
    "Carry out modification comparison for J_1BV45A first. No changes possible
    Message no. EU 526
    Diagnosis
    You are trying to edit an SAP object which has already been changed or enhanced in the current system.
    A new version of this object, changed by SAP, has been imported into the system with a Release upgrade.
    The new SAP version has not been reconciled with the modified version.
    System Response
    The system will deny access in change mode or enhancement mode until the objects have been reconciled.
    Procedure
    Run the modification adjustment (SPAU) for the object. If the object is supported by the Modification Assistant, you can adjust it by clicking the stoplight."
    I don't know how to use SPAU to adjust it ?  and I donn't know where is the tab 'stoplight'.
    Anyone could help me how to resolve it ?
    Best Regards,
    Michael

    Dear Michael,
    Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
    As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
    Let us know the status.
    Thank You.
    Kind Regards,
    Rafikul Hussain

  • Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE

    Dear all,
                   i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
    Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
    ...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
    Thanks in advance,
    Naren

    >
    naren wrote:
    > Dear all,
    >                i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
    >
    > Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
    > ...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
    >
    > Thanks in advance,
    > Naren
    Hi  ,.
    Once You go to SE95 Give the package name as  - J1I2 and Execute .
    If some Note has been applied for the package (Whcih Contains your FM) then it will show following nodes
    Note Corrections
    With Modification Assistant
    Without Modification Assistant
    Appends
    So you need to find under whcih node Your update for FM exits .It must be Visible in red .
    Now goto Menubar >>Goto >>Modification Adjustment .
    once you adjust ,the FM should become Editable .
    Regards,
    Rajesh

  • Carry out modification comparison for REPS  first.No changes possible.

    Hi all,
          Can anybody help me out. I am new to upgrade project. I have made all the adjustments in SPAU, but left out with one object.
         I have chosen reset to original for this object. When I want to add  some custom code. It is not allowing me to do so throwing an error saying that " The object is still in upgrade mode." . It is not locked under transport #, but it is stored in smodilog table under my name.
         I am not able to see this object even in SPAU transaction, to correct my actions.
    Thank You in Advance,
    Nirmala.

    Hi Rajneesh,
    please have a look at following link and get a key from SSCR:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c8/19766d43b111d1896f0000e8322d00/frameset.htm
    Regards
    Bernd

  • I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

    I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

    You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

  • My mother contacts disappear when she sends a message or call someone, how is this possible and how to fix it?

    My mother contacts disappear when she sends a message or call someone, how is this possible and how to fix it?

    Technically the limit of 4Gb per folder should have been removed in a recent patch. Personally I an unconvinced as the developers have said so twice before and something else arose to bite people at 4Gb. So the limit probably does not exist anymore and moving mail and compacting will fix it without data loss if it occurs as recent issues have been about displaying mail after the 4Gb point, not storing it.
    Use the Ctrl and Shift keys in conjunction with your mouse to make multiple selections.
    click followed by Shift+ Click selects everything between the two clicks, including the items clicked.
    Holding the Ctrl key while clicking allows you to select or deselect mail to either fine turn the list from shift clicking or to make one of your own.
    Ctrl +A selects everything in the list from the current selection to the end.
    One option is create an important folder and move your important stuff to it then ctrl +A the whole remaining inbox.

  • Carry out new pricing by changing item category

    Hi All,
    Is it possible to carry out a new pricing depending on item category. The requirement is when i change the item category it should trigger new pricing procedure. Like example if it is tann one pricing procedure and if it change to another category like ztann it should trigger new pricing procedure .
    I know that  pricing procedure not defined on item category. I tried with the exit form userexit_new_pricing_vbap changing new_pricing. But i dont know what to write in that. I am technical guy . Please share me your idea if any one did this before.
    Regards,
    Madhu.
    Edited by: madhurao123 on Mar 10, 2011 5:54 PM

    Dear Lakshmipathy,
    I have tried the option you have suggested but was unable t o make any progress. I have done the following steps:
    In VKOA I have done the revenue account determination based on Acct Assign Grp: Customer, Acct. Assign Grp: Material, and Item Category. Despite this the correct G/L accounts are not being picked up. Can you please suggest where I may be going wrong.
    The scenario is as follows for all Item categories except ZTNN::
    If Customer and Material are taxable @ 5%VAT then pick G/L1
    If Customer and Material are taxable @ 15% VAT then pick G/L 2
    If Customer and Material are taxable @ 2% CST then pick G/L 3
    If Customer and Material are taxable @ 5% CST then pick G/L 4
    If Customer and Material are taxable @ 15% CST then pick G/L 5
    For Item Category ZTNN:
    If Customer and Material are taxable @ 5%VAT then pick G/L6
    If Customer and Material are taxable @ 15% VAT then pick G/L 6
    If Customer and Material are taxable @ 2% CST then pick G/L 6
    If Customer and Material are taxable @ 5% CST then pick G/L 6
    If Customer and Material are taxable @ 15% CST then pick G/L 6
    Your suggestions would be greatly appreciated.
    Thanks and Regards,
    Rohan Gudavalli

  • Message: carry out repairs..

    BW Experts,
    When we get this message, what does it mean.
    'Carry out repairs in non-original system only if they are urgent
    Message no. TR850'
    does it mean the current system is a copy of a system. So this message can be ignored rite ?
    Thanks,
    BWer

    Hi,
    this message also occurs in sandbox systems which are copied from prodsystems. here you can ignore.
    /manfred

  • Modification comparison

    We are upgrading from 4.5b to 4.7.
    Whilst attempting to apply a SAP note, the message 'carry out modification comparison first. No changes possible' is received when attempting to modify a standard SAP program.
    Any suggestions how to overcome this?

    Hi Kevin.
    Have you run transaction SPAU prior to your attempt of changing the SAP program?
    Sounds like the program has been modified before and now a sap version of the program has been delivered. Before changing the program again, the system wants you to decide what to do with your old modifications.
    Hope this helps, Kathrin!

  • No changes possible

    Dear all,
    I want to change a standard method of the class CL_RSR_WWW_PAGE. When I click the change button, it shows "Carry out modification comparison for METH CL_RSR_WWW_PAGE PAGE_CONTROLLER_WRAP first. No changes possible".
    How can I do?
    I want to change this method.
    Thank you very much.
    Seven.Jin

    Dear ravi,
    Thank you, but I want to change it.
    Is there any way to change it?
    The other standard method of this class can be edit by me.
    Seven.jin

  • Modification Comparison for SAP object

    When we try to modify the program /DBM/MT_TILL_FUNC_D2063, reports the following message
    u201CCarry out modification comparison for REPS /DBM/MT_TILL_FUNC_D2063 first. No changes possibleu201D
    We just update our DSAP BM 6.00 system to service pack  SAPK-60007INDBM from SAPK-60005INDBM.
    Before this update was made, we were able to modify the programs, and there was not necessary for a registration key, know on it is necessary to input this key, we input the key from the marketplace,  but still we canu2019t modify it.
    We already try to do the recommendation mentioned, but the object doesn't show in the browser panel.
    What can I do to resolve this issue?
    Alvaro Corpeno

    Hello Alvaro
       This message is caused because there is/are some object locking the object DBM/MT_TILL_FUNC_D2063 . So to check what action is necessary to take to do so you need to check if the objects are notes or just reuqests:
        - Transaction SE16
        - Table SMODILOG
        - List all entries for object DBM/MT_TILL_FUNC_D2063
        - There you will see for each record field OPERATION
        - Check all entries that contains OPERATION = 'NOTE'
        - On field MOD_NAME you can check the note number - last 4 digits are note version
        - Upload this note via SNOTE transaction.
        - This action will update system entries and unlock the object
    Kind regards
    Carlos Machado

  • Modification comparison in SE95

    Hi,
    We are in the process of patch upgrading. After the Upgrade we have applied lot of notes. While applying some manual changes IT ask us to carry out modification comparison first, and it not allowing us to do modification.
    It advise to do modification comparison thru T-Code SE95, pl. help me how to proceed further
    Thanks
    Rengaraj

    Hi,
    The Modification Browser
    An overview of all modifications and enhancements found in your system can be displayed from the ABAP Workbench choosing the function Overview ® Modification Browser (SE95). You can also display an overview from the Repository Browser using Environment ® Modification Browser.
    The following selection screen appears, where you can input selections that limit what the Modification Browser outputs:
    Standard selections can be made on the upper half of the selection screen by entering the person who last changed the object, the number of a transport request or the package. If you enter the number of a transport request into the field Last transport request, the system displays only those objects of the request which were not modified in requests created at a later date. If you insert the request number in the field Request/Task, the system displays all modified objects of the object list.
    You can use the  Note Assistant to import notes into your system and apply the correction instructions contained therein. In the Modification Browser, you can expand a subtree below each note which contains the objects involved in the note correction.
    Standard objects that are supported by the Modification Assistant during modification or upgrade can be displayed using the With Modification Assistant checkbox. All other objects are listed under the Without Modification Assistant category. This category also contains all objects that were modified in the current SAP System before the Modification Assistant was introduced.
    Business Add-Ins provide you with an overview of all enhancements and modifications undertaken in your system. Further information on this way to create enhancements can be found in the section on Business Add-Ins.
    Appends can be  append structures,  append views or  append search helps.
    As on the Display Options tab, you can restrict the display of objects modified or reset using specific criteria on the Reset Objects tab.
    Once you have made your selections, the system takes you to the Modification Browser overview.
    The Color key pushbutton displays a list of what certain highlighting colors mean within the Modification Browser.
    Modifications to programs that cannot be assigned to a modularization unit (for example additional fields or comment lines preceding a subroutine) are displayed in the node External modularization units.
    You can branch directly to ABAP Workbench tools from the Modification Browser display by placing your cursor on a specific object and choosing Display or Change.
    Changes cannot be made to objects currently being adjusted.
    You can also undo modifications from the Modification Browser by placing your cursor on a specific object and choosing Reset to original. Further information can be found in the section Resetting to the Original.
    The Reset to original function can also be used with objects that were modified without the help of the Modification Assistant. Using this function causes the object to be deleted from the modification overview. If no original is available for the object, it is now treated as an SAP original (modifications may, however, be lost during upgrade).
    If new complete objects (programs, function groups, and so on) are created, the corresponding transport object is added to the transport request. If function modules are deleted or view maintenance modules are generated, the associated function group is added to the transport request. In these cases, the Created/Generated node in the Modification Browser is displayed below the associated complete object.
    Objects that have yet to be adjusted also show up in the Modification Browser and are highlighted in color. The objects displayed are compared during an upgrade or when a support package is imported in transaction SPAU by choosing Utilities ® Maintenance ® Upgrade utilities ® Program compare. Read the following sections for more information.
    SPDD and SPAU are the transaction that are used after the upgrade for modification. SPDD is for adjusting the DDIC changes and SPAU is for all other repository objects like programs etc.
    *Reward points
    Regards

  • The error showing as Fiscal year change has not carried out for the coCd

    Hi all,
    I am facing a very critical situation. My client has the last closed fiscal year as 2006(from 2006 april to 2007 march).For the fiscal yr. 2007(2007april to 2008 march) they have already finalised and submitted the reports made from some parallel software.They now want to tally this report with SAP system and to adjust the SAP system entries as per this report.This work was running fine.But on 01.04.2009 none of the asset reports are running.The error it's throwing is as-
    Fiscal year change not yet made for company code PWAL
    Message no. AB059
    Diagnosis
    You have not yet carried out a fiscal year change for company code PWAL, although the current system date is in the new fiscal year.
    Procedure
    Carry out the fiscal year change for company code PWAL.
    Proceed
    The error is quite understandable.We have to close 2007 and then perform the fiscal year change.But the problem is that the adjustment for the year 2007 is not yet complete.Is it the only solution with me that I should close the yr.2007 and again open it after the fiscal yr. change? If that is done can I take care of the adjustment in the posted depreciation? Or is it possible that the system date can be made back to 31.03.2009(very stupid ask!). The real problem is that my client has mistakely created some assets in the year 2007(by AS91 after changing the take over date) those should have been shown in the next year and also some assets are creted in the year 2008 by the same strange method those should be shown in the year 2007.What I am doing now is deleting these legacy assets and creating the new assets in the correct year.And this process is not yet complete.If I close the year 2007, then the depreciation of these legacy assets will also be posted.Later how can I reverse the effect?Also without seeing the reports I can't make the adjustments.Please suggest/advice.
    Debabrata

    Hi Debabrata,
    You have to do all fiscal year closing steps for 2007. When you reopen it you can do a repeat run for 2007. (You can do the reapeat run only for the new/ changed assets.)
    Try first to test this in an actual test system (document it and do the same in production). Perhaps as you know when 2009 is open I want to close 2008 in one week.  All changes they make in the asset system (change depreciation keys, recalulating,...) can result in postings in 2007 / 2008 what they don't want and later fiscal year problems. You will found a lot off masages about this on the form.

  • Carry out repairs in non-original system only if they are urgent

    Hi Experts,
    I am getting this message "Carry out repairs in non-original system only if they are urgent" while i try to edit a z function module which i have created in the development system. Because of this I can't change the code, I need to use the insert, delete....buttons.
    Please help , itz urgent.
    Thanks & Regards,
    Soumya.

    Hello Soumya
    Obviously the Z-function module was originally created on another development system. Therefore you get this message.
    If you have transferred your function group to another development system then simply change the source system of the function group. You can do this using transaction SE03 (function "Change Object Entries...") or you can use function module TRINT_TADIR_MODIFY.
    Regards,
      Uwe

Maybe you are looking for